% $Header: /home/ubuntu/mnt/e9_copy/manual/s_phys_pkgs/text/exch2.tex,v 1.12 2004/03/16 21:52:15 afe Exp $ % $Name: $ %% * Introduction %% o what it does, citations (refs go into mitgcm_manual.bib, %% preferably in alphabetic order) %% o Equations %% * Key subroutines and parameters %% * Reference material (auto generated from Protex and structured comments) %% o automatically inserted at \section{Reference} \section{exch2: Extended Cubed Sphere \mbox{Topology}} \label{sec:exch2} \subsection{Introduction} The \texttt{exch2} package extends the original cubed sphere topology configuration to allow more flexible domain decomposition and parallelization. Cube faces (also called subdomains) may be divided into any number of tiles that divide evenly into the grid point dimensions of the subdomain. Furthermore, the individual tiles may be run on separate processors in different combinations, and whether exchanges between particular tiles occur between different processors is determined at runtime. This flexibility provides for manual compile-time load balancing across a relatively arbitrary number of processors. \\ The exchange parameters are declared in \filelink{pkg/exch2/W2\_EXCH2\_TOPOLOGY.h}{pkg-exch2-W2_EXCH2_TOPOLOGY.h} and assigned in \filelink{pkg/exch2/w2\_e2setup.F}{pkg-exch2-w2_e2setup.F}. The validity of the cube topology depends on the \file{SIZE.h} file as detailed below. The default files provided in the release configure a cubed sphere topology of six tiles, one per subdomain, each with 32$\times$32 grid points, all running on a single processor. Both files are generated by Matlab scripts in \file{utils/exch2/matlab-topology-generator}; see Section \ref{sec:topogen} \sectiontitle{Generating Topology Files for exch2} for details on creating alternate topologies. Pregenerated examples of these files with alternate topologies are provided under \file{utils/exch2/code-mods} along with the appropriate \file{SIZE.h} file for single-processor execution. \subsection{Invoking exch2} To use exch2 with the cubed sphere, the following conditions must be met: \\ $\bullet$ The exch2 package is included when \file{genmake2} is run. The easiest way to do this is to add the line \code{exch2} to the \file{profile.conf} file -- see Section \ref{sect:buildingCode} \sectiontitle{Building the code} for general details. \\ $\bullet$ An example of \file{W2\_EXCH2\_TOPOLOGY.h} and \file{w2\_e2setup.F} must reside in a directory containing code linked when \file{genmake2} runs. The safest place to put these is the directory indicated in the \code{-mods=DIR} command line modifier (typically \file{../code}), or the build directory. The default versions of these files reside in \file{pkg/exch2} and are linked automatically if no other versions exist elsewhere in the link path, but they should be left untouched to avoid breaking configurations other than the one you intend to modify.\\ $\bullet$ Files containing grid parameters, named \file{tile00$n$.mitgrid} where $n$=[1,6] (one per subdomain), must be in the working directory when the MITgcm executable is run. These files are provided in the example experiments for cubed sphere configurations with 32$\times$32 cube sides and are non-trivial to generate -- please contact MITgcm support if you want to generate files for other configurations. \\ $\bullet$ As always when compiling MITgcm, the file \file{SIZE.h} must be placed where \file{genmake2} will find it. In particular for the exch2, the domain decomposition specified in \file{SIZE.h} must correspond with the particular configuration's topology specified in \file{W2\_EXCH2\_TOPOLOGY.h} and \file{w2\_e2setup.F}. Domain decomposition issues particular to exch2 are addressed in Section \ref{sec:topogen} \sectiontitle{Generating Topology Files for exch2} and \ref{sec:exch2mpi} \sectiontitle{exch2, SIZE.h, and MPI}; a more general background on the subject relevant to MITgcm is presented in Section \ref{sect:specifying_a_decomposition} \sectiontitle{Specifying a decomposition}.\\ As of the time of writing the following examples use exch2 and may be used for guidance: \begin{verbatim} verification/adjust_nlfs.cs-32x32x1 verification/adjustment.cs-32x32x1 verification/aim.5l_cs verification/global_ocean.cs32x15 verification/hs94.cs-32x32x5 \end{verbatim} \subsection{Generating Topology Files for exch2} \label{sec:topogen} Alternate cubed sphere topologies may be created using the Matlab scripts in \file{utils/exch2/matlab-topology-generator}. Running the m-file \filelink{driver.m}{utils-exch2-matlab-topology-generator_driver.m} from the Matlab prompt (there are no parameters to pass) generates exch2 topology files \file{W2\_EXCH2\_TOPOLOGY.h} and \file{w2\_e2setup.F} in the working directory and displays a figure of the topology via Matlab. The other m-files in the directory are subroutines of \file{driver.m} and should not be run ``bare'' except for development purposes. \\ The parameters that determine the dimensions and topology of the generated configuration are \code{nr}, \code{nb}, \code{ng}, \code{tnx} and \code{tny}, and all are assigned early in the script. \\ The first three determine the size of the subdomains and hence the size of the overall domain. Each one determines the number of grid points, and therefore the resolution, along the subdomain sides in a ``great circle'' around each axis of the cube. At the time of this writing MITgcm requires these three parameters to be equal, but they provide for future releases to accomodate different resolutions around the axes to allow (for example) greater resolution around the equator.\\ The parameters \code{tnx} and \code{tny} determine the dimensions of the tiles into which the subdomains are decomposed, and must evenly divide the integer assigned to \code{nr}, \code{nb} and \code{ng}. The result is a rectangular tiling of the subdomain. Figure \ref{fig:24tile} shows one possible topology for a twenty-four tile cube, and figure \ref{fig:12tile} shows one for twelve tiles. \\ \begin{figure} \begin{center} \resizebox{4in}{!}{ \includegraphics{part6/s24t_16x16.ps} } \end{center} \caption{Plot of cubed sphere topology with a 32$\times$192 domain divided into six 32$\times$32 subdomains, each of which is divided into four tiles (\code{tnx=16, tny=16}) for a total of twenty-four tiles. } \label{fig:24tile} \end{figure} \begin{figure} \begin{center} \resizebox{4in}{!}{ \includegraphics{part6/s12t_16x32.ps} } \end{center} \caption{Plot of cubed sphere topology with a 32$\times$192 domain divided into six 32$\times$32 subdomains of two tiles each (\code{tnx=16, tny=32}). } \label{fig:12tile} \end{figure} Tiles can be selected from the topology to be omitted from being allocated memory and processors. This tuning is useful in ocean modeling for omitting tiles that fall entirely on land. The tiles omitted are specified in the file \filelink{blanklist.txt}{utils-exch2-matlab-topology-generator_blanklist.txt} by their tile number in the topology, separated by a newline. \\ \subsection{exch2, SIZE.h, and multiprocessing} \label{sec:exch2mpi} Once the topology configuration files are created, the Fortran parameters in \file{SIZE.h} must be configured to match. Section \ref{sect:specifying_a_decomposition} \sectiontitle{Specifying a decomposition} provides a general description of domain decomposition within MITgcm and its relation to \file{SIZE.h}. The current section specifies certain constraints the exch2 package imposes as well as describes how to enable parallel execution with MPI. \\ As in the general case, the parameters \varlink{sNx}{sNx} and \varlink{sNy}{sNy} define the size of the individual tiles, and so must be assigned the same respective values as \code{tnx} and \code{tny} in \file{driver.m}.\\ The halo width parameters \varlink{OLx}{OLx} and \varlink{OLy}{OLy} have no special bearing on exch2 and may be assigned as in the general case. The same holds for \varlink{Nr}{Nr}, the number of vertical levels in the model.\\ The parameters \varlink{nSx}{nSx}, \varlink{nSy}{nSy}, \varlink{nPx}{nPx}, and \varlink{nPy}{nPy} relate to the number of tiles and how they are distributed on processors. When using exch2, the tiles are stored in single dimension, and so \code{\varlink{nSy}{nSy}=1} in all cases. Since the tiles as configured by exch2 cannot be split up accross processors without regenerating the topology, \code{\varlink{nPy}{nPy}=1} as well. \\ The number of tiles MITgcm allocates and how they are distributed between processors depends on \varlink{nPx}{nPx} and \varlink{nSx}{nSx}. \varlink{nSx}{nSx} is the number of tiles per processor and \varlink{nPx}{nPx} the number of processors. The total number of tiles in the topology minus those listed in \file{blanklist.txt} must equal \code{nSx*nPx}. \\ The following is an example of \file{SIZE.h} for the twelve-tile configuration illustrated in figure \ref{fig:12tile} running on one processor: \\ \begin{verbatim} PARAMETER ( & sNx = 16, & sNy = 32, & OLx = 2, & OLy = 2, & nSx = 12, & nSy = 1, & nPx = 1, & nPy = 1, & Nx = sNx*nSx*nPx, & Ny = sNy*nSy*nPy, & Nr = 5) \end{verbatim} The following is an example for the twentyfour-tile topology in figure \ref{fig:24tile} running on six processors: \begin{verbatim} PARAMETER ( & sNx = 16, & sNy = 16, & OLx = 2, & OLy = 2, & nSx = 4, & nSy = 1, & nPx = 6, & nPy = 1, & Nx = sNx*nSx*nPx, & Ny = sNy*nSy*nPy, & Nr = 5) \end{verbatim} \subsection{Key Variables} The descriptions of the variables are divided up into scalars, one-dimensional arrays indexed to the tile number, and two and three dimensional arrays indexed to tile number and neighboring tile. This division reflects the functionality of these variables: The scalars are common to every part of the topology, the tile-indexed arrays to individual tiles, and the arrays indexed by tile and neighbor to relationships between tiles and their neighbors. \\ \subsubsection{Scalars} The number of tiles in a particular topology is set with the parameter \code{NTILES}, and the maximum number of neighbors of any tiles by \code{MAX\_NEIGHBOURS}. These parameters are used for defining the size of the various one and two dimensional arrays that store tile parameters indexed to the tile number and are assigned in the files generated by \file{driver.m}.\\ The scalar parameters \varlink{exch2\_domain\_nxt}{exch2_domain_nxt} and \varlink{exch2\_domain\_nyt}{exch2_domain_nyt} express the number of tiles in the $x$ and $y$ global indices. For example, the default setup of six tiles has \code{exch2\_domain\_nxt=6} and \code{exch2\_domain\_nyt=1}. A topology of twenty-four square tiles, four per subdomain (as in figure \ref{fig:24tile}), will have \code{exch2\_domain\_nxt=12} and \code{exch2\_domain\_nyt=2}. Note that these parameters express the tile layout to allow global data files that are tile-layout-neutral and have no bearing on the internal storage of the arrays. The tiles are internally stored in a range from [1,\varlink{bi}{bi}] the $x$ axis and $y$ axis variable \varlink{bj}{bj} is generally ignored within the package. \\ \subsubsection{Arrays Indexed to Tile Number} The following arrays are of size \code{NTILES}, are indexed to the tile number, and the indices are omitted in their descriptions. \\ The arrays \varlink{exch2\_tnx}{exch2_tnx} and \varlink{exch2\_tny}{exch2_tny} express the $x$ and $y$ dimensions of each tile. At present for each tile \texttt{exch2\_tnx=sNx} and \texttt{exch2\_tny=sNy}, as assigned in \file{SIZE.h} and described in section \ref{sec:exch2mpi} \sectiontitle{exch2, SIZE.h, and multiprocessing}. Future releases of MITgcm are to allow varying tile sizes. \\ The location of the tiles' Cartesian origin within a subdomain are determined by the arrays \varlink{exch2\_tbasex}{exch2_tbasex} and \varlink{exch2\_tbasey}{exch2_tbasey}. These variables are used to relate the location of the edges of different tiles to each other. As an example, in the default six-tile topology ?? each index in these arrays are set to \code{0}. The twentyfour-tile case discussed above will have values of \code{0} or \code{16}, depending on the quadrant the tile falls within the subdomain. The array \varlink{exch2\_myFace}{exch2_myFace} contains the number of the subdomain of each tile, numbered \code{(1:6)} in the case of the standard cube topology and indicated by \textbf{\textsf{f}}$n$ in figures \ref{fig:12tile}) and \ref{fig:24tile}). \\ The elements of the arrays \varlink{exch2\_txglobalo}{exch2_txglobalo} and \varlink{exch2\_txglobalo}{exch2_txglobalo} are similar to \varlink{exch2\_tbasex}{exch2_tbasex} and \varlink{exch2\_tbasey}{exch2_tbasey}, but locate the tiles within the global address space, similar to that used by global files. \\ The arrays \varlink{exch2\_isWedge}{exch2_isWedge}, \varlink{exch2\_isEedge}{exch2_isEedge}, \varlink{exch2\_isSedge}{exch2_isSedge}, and \varlink{exch2\_isNedge}{exch2_isNedge} are set to \code{1} if the indexed tile lies on the edge of a subdomain, \code{0} if not. The values are used within the topology generator to determine the orientation of neighboring tiles, and to indicate whether a tile lies on the corner of a subdomain. The latter case requires special exchange and numerical handling for the singularities at the eight corners of the cube. \varlink{exch2\_nNeighbours}{exch2_nNeighbours} contains a count of how many neighboring tiles each tile has, and is used for setting bounds for looping over neighboring tiles. \varlink{exch2\_tProc}{exch2_tProc} holds the process rank of each tile, and is used in interprocess communication. \\ \subsubsection{Arrays Indexed to Tile Number and Neighbor} The following arrays are all of size \code{MAX\_NEIGHBOURS}$\times$\code{NTILES} and describe the orientations between the the tiles. \\ The array \code{exch2\_neighbourId(a,T)} holds the tile number \code{Tn} for each of the tile number \code{T}'s neighboring tiles \code{a}. The neighbor tiles are indexed \code{(1:MAX\_NEIGHBOURS)} in the order right to left on the north then south edges, and then top to bottom on the east and west edges. Maybe throw in a fig here, eh? \\ The \code{exch2\_opposingSend\_record(a,T)} array holds the index \code{b} in \texttt{exch2\_neighbourId(b,Tn)} that holds the tile number \code{T}. In other words, \begin{verbatim} exch2_neighbourId( exch2_opposingSend_record(a,T), exch2_neighbourId(a,T) ) = T \end{verbatim} This provides a back-reference from the neighbor tiles. \\ The arrays \varlink{exch2\_pi}{exch2_pi}, \varlink{exch2\_pj}{exch2_pj}, \varlink{exch2\_oi}{exch2_oi}, \varlink{exch2\_oj}{exch2_oj}, \varlink{exch2\_oi\_f}{exch2_oi_f}, and \varlink{exch2\_oj\_f}{exch2_oj_f} specify the transformations in exchanges between the neighboring tiles. The dimensions of \code{exch2\_pi(t,N,T)} and \code{exch2\_pj(t,N,T)} are the neighbor ID \code{N} and the tile number \code{T} as explained above, plus a vector of length 2 containing transformation factors \code{t}. The first element of the transformation vector indicates the factor \code{t} by which variables representing the same vector component of a tile \code{T} will be multiplied in exchanges with neighbor \code{N}, and the second element indicates the transform to the variable in the other direction. As an example, \code{exch2\_pi(1,N,T)} holds the transform of the $i$ component of a vector variable in tile \code{T} to the $i$ component of tile \code{T}'s neighbor \code{N}, and \code{exch2\_pi(2,N,T)} hold the component of neighbor \code{N}'s $j$ component. \\ Under the current cube topology, one of the two elements of \code{exch2\_pi} or \code{exch2\_pj} for a given tile \code{T} and neighbor \code{N} will be \code{0}, reflecting the fact that the two vector components are orthogonal. The other element will be 1 or -1, depending on whether the components are indexed in the same or opposite directions. For example, the transform vector of the arrays for all tile neighbors on the same subdomain will be \code{(1,0)}, since all tiles on the same subdomain are oriented identically. A vector direction that corresponds to the orthogonal dimension with the same index direction in a particular tile-neighbor orientation will have \code{(0,1)}, whereas those in the opposite index direction will have \code{(0,-1)}. This needs some diagrams. {\footnotesize \begin{verbatim} C exch2_pi :: X index row of target to source permutation C :: matrix for each neighbour entry. C exch2_pj :: Y index row of target to source permutation C :: matrix for each neighbour entry. C exch2_oi :: X index element of target to source C :: offset vector for cell-centered quantities C :: of each neighbor entry. C exch2_oj :: Y index element of target to source C :: offset vector for cell-centered quantities C :: of each neighbor entry. C exch2_oi_f :: X index element of target to source C :: offset vector for face quantities C :: of each neighbor entry. C exch2_oj_f :: Y index element of target to source C :: offset vector for face quantities C :: of each neighbor entry. \end{verbatim} } \subsection{Key Routines} \subsection{References}