/[MITgcm]/manual/s_getstarted/text/getting_started.tex

Diff of /manual/s_getstarted/text/getting_started.tex

Parent Directory | Revision Log | View Revision Graph Revision Graph | View Patch Patch

-revision 1.36 by molod,
Tue Jun 27 19:08:22 2006 UTC
+revision 1.46 by dimitri,
Sat Nov 21 03:19:54 2015 UTC
 Line 3
  %\section{Getting started}
- In this section, we describe how to use the model. In the first
+ We believe the best way to familiarize yourself with the
- section, we provide enough information to help you get started with
- the model. We believe the best way to familiarize yourself with the
  model is to run the case study examples provided with the base
  version. Information on how to obtain, compile, and run the code is
- found there as well as a brief description of the model structure
+ found here as well as a brief description of the model structure
- directory and the case study examples.  The latter and the code
+ directory and the case study examples. Information is also provided
- structure are described more fully in chapters
+ here on how to customize the code when you are ready to try implementing
- \ref{chap:discretization} and \ref{chap:sarch}, respectively. Here, in
+ the configuration you have in mind.  The code and algorithm
- this section, we provide information on how to customize the code when
+ are described more fully in chapters \ref{chap:discretization} and
- you are ready to try implementing the configuration you have in mind.
+ \ref{chap:sarch}.
  \section{Where to find information}
- \label{sect:whereToFindInfo}
+ \label{sec:whereToFindInfo}
  \begin{rawhtml}
  <!-- CMIREDIR:whereToFindInfo: -->
  \end{rawhtml}
- A web site is maintained for release 2 (``Pelican'') of MITgcm:
+ There is a web-archived support mailing list for the model that
- \begin{rawhtml} <A href=http://mitgcm.org/pelican/ target="idontexist"> \end{rawhtml}
- \begin{verbatim}
- http://mitgcm.org/pelican
- \end{verbatim}
- \begin{rawhtml} </A> \end{rawhtml}
- Here you will find an on-line version of this document, a
- ``browsable'' copy of the code and a searchable database of the model
- and site, as well as links for downloading the model and
- documentation, to data-sources, and other related sites.
- There is also a web-archived support mailing list for the model that
  you can email at \texttt{MITgcm-support@mitgcm.org} or browse at:
  \begin{rawhtml} <A href=http://mitgcm.org/mailman/listinfo/mitgcm-support/ target="idontexist"> \end{rawhtml}
  \begin{verbatim}
-Line 40 
 http://mitgcm.org/mailman/listinfo/mitgc
+Line 27 
 http://mitgcm.org/mailman/listinfo/mitgc
  http://mitgcm.org/pipermail/mitgcm-support/
  \end{verbatim}
  \begin{rawhtml} </A> \end{rawhtml}
- Essentially all of the MITgcm web pages can be searched using a
- popular web crawler such as Google or through our own search facility:
- \begin{rawhtml} <A href=http://mitgcm.org/mailman/htdig/ target="idontexist"> \end{rawhtml}
- \begin{verbatim}
- http://mitgcm.org/htdig/
- \end{verbatim}
- \begin{rawhtml} </A> \end{rawhtml}
- %%% http://www.google.com/search?q=hydrostatic+site%3Amitgcm.org
  \section{Obtaining the code}
- \label{sect:obtainingCode}
+ \label{sec:obtainingCode}
  \begin{rawhtml}
  <!-- CMIREDIR:obtainingCode: -->
  \end{rawhtml}
-Line 86 
 provide easy support for maintenance upd
+Line 63 
 provide easy support for maintenance upd
  \end{enumerate}
  \subsection{Method 1 - Checkout from CVS}
- \label{sect:cvs_checkout}
+ \label{sec:cvs_checkout}
  If CVS is available on your system, we strongly encourage you to use it. CVS
  provides an efficient and elegant way of organizing your code and keeping
-Line 115 
 You only need to do a ``cvs login'' once
+Line 92 
 You only need to do a ``cvs login'' once
  To obtain the latest sources type:
  \begin{verbatim}
- % cvs co MITgcm
+ % cvs co -P MITgcm
  \end{verbatim}
  or to get a specific release type:
  \begin{verbatim}
- % cvs co -P -r checkpoint52i_post  MITgcm
+ % cvs co -P -r checkpoint52i_post MITgcm
  \end{verbatim}
+ The CVS command ``\texttt{cvs co}'' is the abreviation of the full-name
+ ``\texttt{cvs checkout}'' command and using the option ``-P'' (\texttt{cvs co -P})
+ will prevent to download unnecessary empty directories.
  The MITgcm web site contains further directions concerning the source
  code and CVS.  It also contains a web interface to our CVS archive so
  that one may easily view the state of files, revisions, and other
  development milestones:
- \begin{rawhtml} <A href="http://mitgcm.org/download" target="idontexist"> \end{rawhtml}
+ \begin{rawhtml} <A href="http://mitgcm.org/viewvc/MITgcm/MITgcm/" target="idontexist"> \end{rawhtml}
  \begin{verbatim}
- http://mitgcm.org/source_code.html
+ http://mitgcm.org/viewvc/MITgcm/MITgcm/
  \end{verbatim}
  \begin{rawhtml} </A> \end{rawhtml}
-Line 162 
 track of your file versions with respect
+Line 143 
 track of your file versions with respect
  the files in \texttt{CVS}!  You can also use CVS to download code
  updates.  More extensive information on using CVS for maintaining
  MITgcm code can be found
- \begin{rawhtml} <A href="http://mitgcm.org/usingcvstoget.html" target="idontexist"> \end{rawhtml}
+ \begin{rawhtml} <A href="http://mitgcm.org/public/using_cvs.html" target="idontexist"> \end{rawhtml}
  here
- \begin{rawhtml} </A> \end{rawhtml}
+ \begin{rawhtml} </A> \end{rawhtml}.
- .
  It is important to note that the CVS aliases in Table
  \ref{tab:cvsModules} cannot be used in conjunction with the CVS
  \texttt{-d DIRNAME} option.  However, the \texttt{MITgcm} directories
  they create can be changed to a different name following the check-out:
  \begin{verbatim}
-    %  cvs co MITgcm_verif_basic
+    %  cvs co -P MITgcm_verif_basic
     %  mv MITgcm MITgcm_verif_basic
  \end{verbatim}
+ Note that it is possible to checkout code without ``cvs login'' and without
- \subsection{Method 2 - Tar file download}
+ setting any shell environment variables by specifying the pserver name and
- \label{sect:conventionalDownload}
+ password in one line, for example:
- If you do not have CVS on your system, you can download the model as a
- tar file from the web site at:
- \begin{rawhtml} <A href=http://mitgcm.org/download target="idontexist"> \end{rawhtml}
  \begin{verbatim}
- http://mitgcm.org/download/
+    %  cvs -d :pserver:cvsanon:cvsanon@mitgcm.org:/u/gcmpack co -P MITgcm
  \end{verbatim}
- \begin{rawhtml} </A> \end{rawhtml}
- The tar file still contains CVS information which we urge you not to
- delete; even if you do not use CVS yourself the information can help
- us if you should need to send us your copy of the code.  If a recent
- tar file does not exist, then please contact the developers through
- the
- \begin{rawhtml} <A href="mailto:MITgcm-support@mitgcm.org"> \end{rawhtml}
- MITgcm-support@mitgcm.org
- \begin{rawhtml} </A> \end{rawhtml}
- mailing list.
  \subsubsection{Upgrading from an earlier version}
-Line 206 
 your copy instead of downloading the ent
+Line 172 
 your copy instead of downloading the ent
  \end{verbatim}
  and then issue the cvs update command such as:
  \begin{verbatim}
- % cvs -q update -r checkpoint52i_post -d -P
+ % cvs -q update -d -P -r checkpoint52i_post
  \end{verbatim}
  This will update the ``tag'' to ``checkpoint52i\_post'', add any new
  directories (-d) and remove any empty directories (-P). The -q option
-Line 252 
 have run into a problem for which ``we h
+Line 218 
 have run into a problem for which ``we h
  latest code'' and we haven't made a ``tag'' or ``release'' since that
  patch then you'll need to get the latest code:
  \begin{verbatim}
- % cvs -q update -A -d -P
+ % cvs -q update -d -P -A
  \end{verbatim}
  Unlike, the ``check-out'' and ``update'' procedures above, there is no
  ``tag'' or release name. The -A tells CVS to upgrade to the
-Line 262 
 that you may only have part of a patch.
+Line 228 
 that you may only have part of a patch.
  also means we can't tell what version of the code you are working
  with. So please be sure you understand what you're doing.
+ \subsection{Method 2 - Tar file download}
+ \label{sec:conventionalDownload}
+ If you do not have CVS on your system, you can download the model as a
+ tar file from the web site at:
+ \begin{rawhtml} <A href=http://mitgcm.org/download/ target="idontexist"> \end{rawhtml}
+ \begin{verbatim}
+ http://mitgcm.org/download/
+ \end{verbatim}
+ \begin{rawhtml} </A> \end{rawhtml}
+ The tar file still contains CVS information which we urge you not to
+ delete; even if you do not use CVS yourself the information can help
+ us if you should need to send us your copy of the code.  If a recent
+ tar file does not exist, then please contact the developers through
+ the
+ \begin{rawhtml} <A href="mailto:MITgcm-support@mitgcm.org"> \end{rawhtml}
+ MITgcm-support@mitgcm.org
+ \begin{rawhtml} </A> \end{rawhtml}
+ mailing list.
  \section{Model and directory structure}
  \begin{rawhtml}
  <!-- CMIREDIR:directory_structure: -->
-Line 286 
 structure).
+Line 272 
 structure).
  \begin{itemize}
- \item \texttt{bin}: this directory is initially empty. It is the
-   default directory in which to compile the code.
- \item \texttt{diags}: contains the code relative to time-averaged
-   diagnostics. It is subdivided into two subdirectories \texttt{inc}
-   and \texttt{src} that contain include files (\texttt{*.h} files) and
-   Fortran subroutines (\texttt{*.F} files), respectively.
  \item \texttt{doc}: contains brief documentation notes.
  \item \texttt{eesupp}: contains the execution environment source code.
    Also subdivided into two subdirectories \texttt{inc} and
    \texttt{src}.
- \item \texttt{exe}: this directory is initially empty. It is the
-   default directory in which to execute the code.
  \item \texttt{model}: this directory contains the main source code.
    Also subdivided into two subdirectories \texttt{inc} and
    \texttt{src}.
-Line 311 
 structure).
+Line 286 
 structure).
    package corresponds to a subdirectory. For example, \texttt{gmredi}
    contains the code related to the Gent-McWilliams/Redi scheme,
    \texttt{aim} the code relative to the atmospheric intermediate
-   physics. The packages are described in detail in section 3.
+   physics. The packages are described in detail in chapter \ref{chap:packagesI}.
  \item \texttt{tools}: this directory contains various useful tools.
    For example, \texttt{genmake2} is a script written in csh (C-shell)
    that should be used to generate your makefile. The directory
    \texttt{adjoint} contains the makefile specific to the Tangent
    linear and Adjoint Compiler (TAMC) that generates the adjoint code.
-   The latter is described in details in part V.
+   The latter is described in detail in part \ref{chap.ecco}.
+   This directory also contains the subdirectory build\_options, which
+   contains the `optfiles' with the compiler options for the different
+   compilers and machines that can run MITgcm.
  \item \texttt{utils}: this directory contains various utilities. The
    subdirectory \texttt{knudsen2} contains code and a makefile that
-Line 327 
 structure).
+Line 305 
 structure).
    \texttt{matlab} subdirectory contains matlab scripts for reading
    model output directly into matlab. \texttt{scripts} contains C-shell
    post-processing scripts for joining processor-based and tiled-based
-   model output.
+   model output. The subdirectory exch2 contains the code needed for
+   the exch2 package to work with different combinations of domain
+   decompositions.
  \item \texttt{verification}: this directory contains the model
-   examples. See section \ref{sect:modelExamples}.
+   examples. See section \ref{sec:modelExamples}.
+ \item \texttt{jobs}: contains sample job scripts for running MITgcm.
+ \item \texttt{lsopt}: Line search code used for optimization.
+ \item \texttt{optim}: Interface between MITgcm and line search code.
  \end{itemize}
  \section[Building MITgcm]{Building the code}
- \label{sect:buildingCode}
+ \label{sec:buildingCode}
  \begin{rawhtml}
  <!-- CMIREDIR:buildingCode: -->
  \end{rawhtml}
-Line 344 
 To compile the code, we use the \texttt{
+Line 330 
 To compile the code, we use the \texttt{
  file (\texttt{Makefile}) that allows us to pre-process source files,
  specify compiler and optimization options and also figures out any
  file dependencies. We supply a script (\texttt{genmake2}), described
- in section \ref{sect:genmake}, that automatically creates the
+ in section \ref{sec:genmake}, that automatically creates the
  \texttt{Makefile} for you. You then need to build the dependencies and
  compile the code.
-Line 419 
 where the ``2'' can be replaced with a n
+Line 405 
 where the ``2'' can be replaced with a n
  number of CPUs available.
  Now you are ready to run the model. General instructions for doing so are
- given in section \ref{sect:runModel}. Here, we can run the model by
+ given in section \ref{sec:runModel}. Here, we can run the model by
  first creating links to all the input files:
  \begin{verbatim}
  ln -s ../input/* .
-Line 433 
 where we are re-directing the stream of
+Line 419 
 where we are re-directing the stream of
  \subsection{Building/compiling the code elsewhere}
- In the example above (section \ref{sect:buildingCode}) we built the
+ In the example above (section \ref{sec:buildingCode}) we built the
  executable in the {\em input} directory of the experiment for
  convenience. You can also configure and compile the code in other
  locations, for example on a scratch disk with out having to copy the
-Line 537 
 the one experiment:
+Line 523 
 the one experiment:
  \subsection{Using \texttt{genmake2}}
- \label{sect:genmake}
+ \label{sec:genmake}
  To compile the code, first use the program \texttt{genmake2} (located
  in the \texttt{tools} directory) to generate a Makefile.
  \texttt{genmake2} is a shell script written to work with all
  ``sh''--compatible shells including bash v1, bash v2, and Bourne.
- Internally, \texttt{genmake2} determines the locations of needed
+ %Internally, \texttt{genmake2} determines the locations of needed
- files, the compiler, compiler options, libraries, and Unix tools.  It
+ %files, the compiler, compiler options, libraries, and Unix tools.  It
- relies upon a number of ``optfiles'' located in the
+ %relies upon a number of ``optfiles'' located in the
- \texttt{tools/build\_options} directory.
+ %\texttt{tools/build\_options} directory.
+ \texttt{genmake2} parses information from the following sources:
+ \begin{description}
+ \item[-] a {\em gemake\_local} file if one is found in the current
+   directory
+ \item[-] command-line options
+ \item[-] an "options file" as specified by the command-line option
+   \texttt{--optfile=/PATH/FILENAME}
+ \item[-] a {\em packages.conf} file (if one is found) with the
+   specific list of packages to compile. The search path for
+   file {\em packages.conf} is, first, the current directory and
+   then each of the "MODS" directories in the given order (see below).
+ \end{description}
+ \subsubsection{Optfiles in \texttt{tools/build\_options} directory:}
  The purpose of the optfiles is to provide all the compilation options
  for particular ``platforms'' (where ``platform'' roughly means the
 Line 619 
 for inclusion.  Please send the file to
  \begin{rawhtml} </A> \end{rawhtml}
  mailing list.
+ \subsubsection{Command-line options:}
  In addition to the optfiles, \texttt{genmake2} supports a number of
  helpful command-line options.  A complete list of these options can be
  obtained from:
-Line 641 
 The most important command-line options
+Line 643 
 The most important command-line options
    the user's path.  When these three items have been identified,
    genmake2 will try to find an optfile that has a matching name.
- \item[\texttt{--pdefault='PKG1 PKG2 PKG3 ...'}] specifies the default
+ \item[\texttt{--mods='DIR1 DIR2 DIR3 ...'}] specifies a list of
-   set of packages to be used.  The normal order of precedence for
+   directories containing ``modifications''.  These directories contain
-   packages is as follows:
+   files with names that may (or may not) exist in the main MITgcm
-   \begin{enumerate}
+   source tree but will be overridden by any identically-named sources
-   \item If available, the command line (\texttt{--pdefault}) settings
+   within the ``MODS'' directories.
-     over-rule any others.
+   The order of precedence for this "name-hiding" is as follows:
-   \item Next, \texttt{genmake2} will look for a file named
+   \begin{itemize}
-     ``\texttt{packages.conf}'' in the local directory or in any of the
+   \item ``MODS'' directories (in the order given)
-     directories specified with the \texttt{--mods} option.
+   \item Packages either explicitly specified or provided by default
+     (in the order given)
-   \item Finally, if neither of the above are available,
+   \item Packages included due to package dependencies (in the order
-     \texttt{genmake2} will use the \texttt{/pkg/pkg\_default} file.
+     that that package dependencies are parsed)
-   \end{enumerate}
+   \item The "standard dirs" (which may have been specified by the
+     ``-standarddirs'' option)
+   \end{itemize}
+ \item[\texttt{--pgroups=/PATH/FILENAME}] specifies the file
+   where package groups are defined. If not set, the package-groups
+   definition will be read from {\em pkg/pkg\_groups}.
+   It also contains the default list of packages (defined
+   as the group ``{\it default\_pkg\_list}'' which is used
+   when no specific package list ({\em packages.conf})
+   is found in current directory or in any "MODS" directory.
  \item[\texttt{--pdepend=/PATH/FILENAME}] specifies the dependency file
    used for packages.
-Line 680 
 The most important command-line options
+Line 692 
 The most important command-line options
    "STAF" compiler.  As with any compilers, it is helpful to have their
    directories listed in your {\tt \$PATH} environment variable.
- \item[\texttt{--mods='DIR1 DIR2 DIR3 ...'}] specifies a list of
-   directories containing ``modifications''.  These directories contain
-   files with names that may (or may not) exist in the main MITgcm
-   source tree but will be overridden by any identically-named sources
-   within the ``MODS'' directories.
-   The order of precedence for this "name-hiding" is as follows:
-   \begin{itemize}
-   \item ``MODS'' directories (in the order given)
-   \item Packages either explicitly specified or provided by default
-     (in the order given)
-   \item Packages included due to package dependencies (in the order
-     that that package dependencies are parsed)
-   \item The "standard dirs" (which may have been specified by the
-     ``-standarddirs'' option)
-   \end{itemize}
  \item[\texttt{--mpi}] This option enables certain MPI features (using
    CPP \texttt{\#define}s) within the code and is necessary for MPI
-   builds (see Section \ref{sect:mpi-build}).
+   builds (see Section \ref{sec:mpi-build}).
  \item[\texttt{--make=/path/to/gmake}] Due to the poor handling of
    soft-links and other bugs common with the \texttt{make} versions
-Line 722 
 The most important command-line options
+Line 717 
 The most important command-line options
  \subsection{Building with MPI}
- \label{sect:mpi-build}
+ \label{sec:mpi-build}
  Building MITgcm to use MPI libraries can be complicated due to the
  variety of different MPI implementations available, their dependencies
-Line 737 
 The steps for building MITgcm with MPI s
+Line 732 
 The steps for building MITgcm with MPI s
  \item Determine the locations of your MPI-enabled compiler and/or MPI
    libraries and put them into an options file as described in Section
-   \ref{sect:genmake}.  One can start with one of the examples in:
+   \ref{sec:genmake}.  One can start with one of the examples in:
    \begin{rawhtml} <A
-     href="http://mitgcm.org/cgi-bin/viewcvs.cgi/MITgcm/tools/build_options/">
+     href="http://mitgcm.org/viewvc/MITgcm/MITgcm/tools/build_options/">
    \end{rawhtml}
    \begin{center}
      \texttt{MITgcm/tools/build\_options/}
-Line 772 
 The steps for building MITgcm with MPI s
+Line 767 
 The steps for building MITgcm with MPI s
    \end{itemize}
  \item Build the code with the \texttt{genmake2} \texttt{-mpi} option
-   (see Section \ref{sect:genmake}) using commands such as:
+   (see Section \ref{sec:genmake}) using commands such as:
  {\footnotesize \begin{verbatim}
    %  ../../../tools/genmake2 -mods=../code -mpi -of=YOUR_OPTFILE
    %  make depend
-Line 790 
 The steps for building MITgcm with MPI s
+Line 785 
 The steps for building MITgcm with MPI s
    library and a job scheduling and queueing system such as PBS,
    LoadLeveller, Condor, or any of a number of similar tools.  A few
    example scripts (those used for our \begin{rawhtml} <A
-     href="http://mitgcm.org/testing.html"> \end{rawhtml}regular
+     href="http://mitgcm.org/public/testing.html"> \end{rawhtml}regular
    verification runs\begin{rawhtml} </A> \end{rawhtml}) are available
    at:
    \begin{rawhtml} <A
-     href="http://mitgcm.org/cgi-bin/viewcvs.cgi/MITgcm_contrib/test_scripts/">
+     href="http://mitgcm.org/viewvc/MITgcm/MITgcm/tools/example_scripts/">
+   \end{rawhtml}
+   {\footnotesize \tt
+     http://mitgcm.org/viewvc/MITgcm/MITgcm/tools/example\_scripts/ }
+   \begin{rawhtml} </A> \end{rawhtml}
+   or at:
+   \begin{rawhtml} <A
+     href="http://mitgcm.org/viewvc/MITgcm/MITgcm_contrib/test_scripts/">
    \end{rawhtml}
    {\footnotesize \tt
-     http://mitgcm.org/cgi-bin/viewcvs.cgi/MITgcm\_contrib/test\_scripts/ }
+     http://mitgcm.org/viewvc/MITgcm/MITgcm\_contrib/test\_scripts/ }
    \begin{rawhtml} </A> \end{rawhtml}
  \end{enumerate}
-Line 819 
 the GNU g77 compiler and the mpich MPI l
+Line 821 
 the GNU g77 compiler and the mpich MPI l
  \end{verbatim} }
  \section[Running MITgcm]{Running the model in prognostic mode}
- \label{sect:runModel}
+ \label{sec:runModel}
  \begin{rawhtml}
  <!-- CMIREDIR:runModel: -->
  \end{rawhtml}
- If compilation finished succesfully (section \ref{sect:buildingCode})
+ If compilation finished succesfully (section \ref{sec:buildingCode})
  then an executable called \texttt{mitgcmuv} will now exist in the
  local directory.
-Line 916 
 as the pickup files but are named differ
+Line 918 
 as the pickup files but are named differ
  used to restart the model but are overwritten every other time they are
  output to save disk space during long integrations.
  \subsubsection{MNC output files}
  Unlike the \texttt{mdsio} output, the \texttt{mnc}--generated output
  is usually (though not necessarily) placed within a subdirectory with
- a name such as \texttt{mnc\_test\_\${DATE}\_\${SEQ}}.  The files
+ a name such as \texttt{mnc\_test\_\${DATE}\_\${SEQ}}.
- within this subdirectory are all in the ``self-describing'' netCDF
- format and can thus be browsed and/or plotted using tools such as:
- \begin{itemize}
- \item \texttt{ncdump} is a utility which is typically included
-   with every netCDF install:
-   \begin{rawhtml} <A href="http://www.unidata.ucar.edu/packages/netcdf/"> \end{rawhtml}
- \begin{verbatim}
- http://www.unidata.ucar.edu/packages/netcdf/
- \end{verbatim}
-   \begin{rawhtml} </A> \end{rawhtml} and it converts the netCDF
-   binaries into formatted ASCII text files.
- \item \texttt{ncview} utility is a very convenient and quick way
-   to plot netCDF data and it runs on most OSes:
-   \begin{rawhtml} <A href="http://meteora.ucsd.edu/~pierce/ncview_home_page.html"> \end{rawhtml}
- \begin{verbatim}
- http://meteora.ucsd.edu/~pierce/ncview_home_page.html
- \end{verbatim}
-   \begin{rawhtml} </A> \end{rawhtml}
- \item MatLAB(c) and other common post-processing environments provide
-   various netCDF interfaces including:
-   \begin{rawhtml} <A href="http://mexcdf.sourceforge.net/"> \end{rawhtml}
- \begin{verbatim}
- http://mexcdf.sourceforge.net/
- \end{verbatim}
-   \begin{rawhtml} </A> \end{rawhtml}
-   \begin{rawhtml} <A href="http://woodshole.er.usgs.gov/staffpages/cdenham/public_html/MexCDF/nc4ml5.html"> \end{rawhtml}
- \begin{verbatim}
- http://woodshole.er.usgs.gov/staffpages/cdenham/public_html/MexCDF/nc4ml5.html
- \end{verbatim}
-   \begin{rawhtml} </A> \end{rawhtml}
- \end{itemize}
  \subsection{Looking at the output}
-Line 992 
 Some examples of reading and visualizing
+Line 958 
 Some examples of reading and visualizing
  Similar scripts for netCDF output (\texttt{rdmnc.m}) are available and
  they are described in Section \ref{sec:pkg:mnc}.
+ The MNC output files are all in the ``self-describing'' netCDF
+ format and can thus be browsed and/or plotted using tools such as:
+ \begin{itemize}
+ \item \texttt{ncdump} is a utility which is typically included
+   with every netCDF install:
+   \begin{rawhtml} <A href="http://www.unidata.ucar.edu/packages/netcdf/"> \end{rawhtml}
+ \begin{verbatim}
+ http://www.unidata.ucar.edu/packages/netcdf/
+ \end{verbatim}
+   \begin{rawhtml} </A> \end{rawhtml} and it converts the netCDF
+   binaries into formatted ASCII text files.
+ \item \texttt{ncview} utility is a very convenient and quick way
+   to plot netCDF data and it runs on most OSes:
+   \begin{rawhtml} <A href="http://meteora.ucsd.edu/~pierce/ncview_home_page.html"> \end{rawhtml}
+ \begin{verbatim}
+ http://meteora.ucsd.edu/~pierce/ncview_home_page.html
+ \end{verbatim}
+   \begin{rawhtml} </A> \end{rawhtml}
+ \item MatLAB(c) and other common post-processing environments provide
+   various netCDF interfaces including:
+   \begin{rawhtml} <A href="http://mexcdf.sourceforge.net/"> \end{rawhtml}
+ \begin{verbatim}
+ http://mexcdf.sourceforge.net/
+ \end{verbatim}
+   \begin{rawhtml} </A> \end{rawhtml}
+   \begin{rawhtml} <A href="http://woodshole.er.usgs.gov/staffpages/cdenham/public_html/MexCDF/nc4ml5.html"> \end{rawhtml}
+ \begin{verbatim}
+ http://woodshole.er.usgs.gov/staffpages/cdenham/public_html/MexCDF/nc4ml5.html
+ \end{verbatim}
+   \begin{rawhtml} </A> \end{rawhtml}
+ \end{itemize}

 Legend:



Removed from v.1.36
 


changed lines


 
Added in v.1.46
 Legend:



Removed from v.1.36
 


changed lines


 
Added in v.1.46
-Removed from v.1.36
+Added in v.1.46

	ViewVC Help
Powered by ViewVC 1.1.22