shelfice_remeshing/code/shelfice_readparms.F

C $Header: /u/gcmpack/MITgcm_contrib/verification_other/shelfice_remeshing/code/shelfice_readparms.F,v 1.4 2016/01/26 10:49:13 dgoldberg Exp $
C $Name:  $

#include "SHELFICE_OPTIONS.h"

CBOP
C !ROUTINE: SHELFICE_READPARMS

C !INTERFACE: ==========================================================
      SUBROUTINE SHELFICE_READPARMS( myThid )

C !DESCRIPTION:
C     Initialize SHELFICE parameters, read in data.shelfice

C !USES: ===============================================================
      IMPLICIT NONE
#include "SIZE.h"
#include "EEPARAMS.h"
#include "PARAMS.h"
#include "SHELFICE.h"
#ifdef ALLOW_COST
# include "SHELFICE_COST.h"
#endif /* ALLOW_COST */
#ifdef ALLOW_MNC
# include "MNC_PARAMS.h"
#endif

C !INPUT PARAMETERS: ===================================================
C  myThid               :: thread number
      INTEGER myThid

C !OUTPUT PARAMETERS: ==================================================
C  none

#ifdef ALLOW_SHELFICE

C !LOCAL VARIABLES: ====================================================
C  iUnit                :: unit number for I/O
C  msgBuf               :: message buffer
      INTEGER iUnit
      CHARACTER*(MAX_LEN_MBUF) msgBuf
CEOP

      NAMELIST /SHELFICE_PARM01/
     &     SHELFICEheatTransCoeff,
     &     SHELFICEsaltTransCoeff,
     &     SHELFICEMassStepping,
     &     rhoShelfice, SHELFICEkappa,
     &     SHELFICElatentHeat, SHELFICEHeatCapacity_Cp,
     &     SHELFICEDragLinear, SHELFICEDragQuadratic,
     &     SHELFICEthetaSurface,
     &     useISOMIPTD, no_slip_shelfice,
     &     SHELFICEconserve, SHELFICEboundaryLayer,
     &     SHELFICEthickBoundaryLayer,
     &     SHELFICErealFWflux,
     &     SHELFICEwriteState,
     &     SHELFICE_dumpFreq,
     &     SHELFICE_taveFreq,
     &     SHELFICE_tave_mnc,
     &     SHELFICE_dump_mnc,
     &     SHELFICEtopoFile,
     &     SHELFICEmassFile, SHELFICEloadAnomalyFile, 
     &     SHELFICEMassDynTendFile, 
     &     SHELFICEDynMassOnly,
     &     SHELFICEadvDiffHeatFlux,
     &     SHELFICEuseGammaFrict,
     &     SHELFICERemeshFrequency,
     &     SHELFICESplitThreshold,
     &     SHELFICEMergeThreshold,
     &     shiCdrag, shiZetaN, shiRc,
     &     shiPrandtl, shiSchmidt, shiKinVisc,
     &     shelficeEtaSponge, ShelficeEtaRelax,
     &     shelfice_etarestore_spongewidth,
     &     SHELFICE_dig_ice
#ifdef ALLOW_COST
     &     , mult_shelfice
     &     , mult_shifwflx, wshifwflx0, shifwflx_errfile
#endif

C---+----1----+----2----+----3----+----4----+----5----+----6----+----7-|--+----|

      IF ( .NOT.useShelfIce ) THEN
C-    pkg SHELFICE is not used
        _BEGIN_MASTER(myThid)
C-    Track pkg activation status:
         SHELFICEisOn = .FALSE.
C     print a (weak) warning if data.shelfice is found
         CALL PACKAGES_UNUSED_MSG( 'useShelfIce', ' ', ' ' )
        _END_MASTER(myThid)
        RETURN
      ENDIF

      _BEGIN_MASTER(myThid)

C This routine has been called by the main model so we set our
C internal flag to indicate we are in business
      SHELFICEisOn = .TRUE.

C Set defaults values for parameters in SHELFICE.h
      useISOMIPTD              = .FALSE.
      SHELFICEconserve         = .FALSE.
      SHELFICEboundaryLayer    = .FALSE.
      SHELFICEthickBoundaryLayer 
     &                         = .FALSE.
      SHELFICErealFWflux       = .FALSE.
      SHELFICEMassStepping     = .FALSE.
      SHELFICEDynMassOnly      = .FALSE.
      SHELFICEtopoFile         = ' '
      SHELFICEmassFile         = ' '
      SHELFICEloadAnomalyFile  = ' '
      SHELFICEMassDynTendFile  = ' '
      SHELFICElatentHeat       =  334.0 _d 3
      SHELFICEHeatCapacity_Cp  = 2000.0 _d 0
      rhoShelfIce              =  917.0 _d 0
      SHELFICEheatTransCoeff   =    1.0 _d -04
      SHELFICEsaltTransCoeff   = UNSET_RL
      SHELFICEkappa            =   1.54 _d -06
      SHELFICEthetaSurface     = - 20.0 _d 0
      no_slip_shelfice         = no_slip_bottom
      SHELFICEDragLinear       = bottomDragLinear
      SHELFICEDragQuadratic    = UNSET_RL
      SHELFICEselectDragQuadr  = -1
      SHELFICEwriteState       = .FALSE.
      SHELFICE_dumpFreq        = dumpFreq
      SHELFICE_taveFreq        = taveFreq
      SHELFICEadvDiffHeatFlux  = .FALSE.
      SHELFICEuseGammaFrict    = .FALSE.
      SHELFICERemeshFrequency  = 2592000.
      SHELFICESplitThreshold   = 5
      SHELFICEMergeThreshold   = -8
      shelficeEtaRelax         = 0.
      shelfice_etarestore_spongewidth = 0
      shelficeEtaSponge        = .false.
      SHELFICE_dig_ice         = .true.
C these params. are default of Holland and Jenkins (1999)
      shiCdrag                 = 0.0015 _d 0
      shiZetaN                 = 0.052 _d 0
      shiRc                    = 0.2 _d 0
      shiPrandtl               = 13.8 _d 0
      shiSchmidt               = 2432.0 _d 0
      shiKinVisc               = 1.95 _d -6
#ifdef ALLOW_COST
      mult_shelfice            = 0. _d 0
      mult_shifwflx            = 0. _d 0
      wshifwflx0               = 0. _d 0
      shifwflx_errfile         = ' '
#endif
#ifdef ALLOW_MNC
      SHELFICE_tave_mnc = timeave_mnc
      SHELFICE_dump_mnc = snapshot_mnc
#else
      SHELFICE_tave_mnc = .FALSE.
      SHELFICE_dump_mnc = .FALSE.
#endif

C Open and read the data.shelfice file
      WRITE(msgBuf,'(A)') ' SHELFICE_READPARMS: opening data.shelfice'
      CALL PRINT_MESSAGE(msgBuf, standardMessageUnit,
     &                   SQUEEZE_RIGHT, myThid )
      CALL OPEN_COPY_DATA_FILE(
     I                   'data.shelfice', 'SHELFICE_READPARMS',
     O                   iUnit,
     I                   myThid )
      READ(UNIT=iUnit,NML=SHELFICE_PARM01)
      WRITE(msgBuf,'(A)')
     &  ' SHELFICE_READPARMS: finished reading data.shelfice'
      CALL PRINT_MESSAGE(msgBuf, standardMessageUnit,
     &                   SQUEEZE_RIGHT, myThid )

C Close the open data file
      CLOSE(iUnit)

C Now set-up any remaining parameters that result from the input parameters
      IF ( SHELFICEsaltTransCoeff .EQ. UNSET_RL )
     &     SHELFICEsaltTransCoeff =
     &     5.05 _d -3 *SHELFICEheatTransCoeff

C Set quadratic bottom drag depending on choices:
      IF ( SHELFICEDragQuadratic .EQ. UNSET_RL) THEN
       IF ( SHELFICEuseGammaFrict ) THEN
        SHELFICEDragQuadratic = shiCdrag
       ELSE
        SHELFICEDragQuadratic = bottomDragQuadratic
       ENDIF
      ENDIF
      IF ( SHELFICEDragQuadratic.EQ.0. _d 0 ) THEN
        SHELFICEselectDragQuadr = -1
      ELSEIF ( SHELFICEselectDragQuadr.EQ.-1 ) THEN
        SHELFICEselectDragQuadr = MAX( 0, selectBotDragQuadr )
      ENDIF

C-    Set Output type flags :
      SHELFICE_tave_mdsio = .TRUE.
      SHELFICE_dump_mdsio = .TRUE.
#ifdef ALLOW_MNC
      IF (useMNC) THEN
        IF ( .NOT.outputTypesInclusive
     &       .AND. SHELFICE_tave_mnc ) SHELFICE_tave_mdsio = .FALSE.
        IF ( .NOT.outputTypesInclusive
     &       .AND. SHELFICE_dump_mnc ) SHELFICE_dump_mdsio = .FALSE.
      ENDIF
#endif

      _END_MASTER(myThid)
C Everyone else must wait for the parameters to be loaded
      _BARRIER

#endif /* ALLOW_SHELFICE */

      RETURN
      END
1	dgoldberg	1.5	C $Header: /u/gcmpack/MITgcm_contrib/verification_other/shelfice_remeshing/code/shelfice_readparms.F,v 1.4 2016/01/26 10:49:13 dgoldberg Exp $
2	dgoldberg	1.1	C $Name: $
3
4			#include "SHELFICE_OPTIONS.h"
5
6			CBOP
7			C !ROUTINE: SHELFICE_READPARMS
8
9			C !INTERFACE: ==========================================================
10			SUBROUTINE SHELFICE_READPARMS( myThid )
11
12			C !DESCRIPTION:
13			C Initialize SHELFICE parameters, read in data.shelfice
14
15			C !USES: ===============================================================
16			IMPLICIT NONE
17			#include "SIZE.h"
18			#include "EEPARAMS.h"
19			#include "PARAMS.h"
20			#include "SHELFICE.h"
21			#ifdef ALLOW_COST
22			# include "SHELFICE_COST.h"
23			#endif /* ALLOW_COST */
24			#ifdef ALLOW_MNC
25			# include "MNC_PARAMS.h"
26			#endif
27
28			C !INPUT PARAMETERS: ===================================================
29			C myThid :: thread number
30			INTEGER myThid
31
32			C !OUTPUT PARAMETERS: ==================================================
33			C none
34
35			#ifdef ALLOW_SHELFICE
36
37			C !LOCAL VARIABLES: ====================================================
38			C iUnit :: unit number for I/O
39			C msgBuf :: message buffer
40			INTEGER iUnit
41			CHARACTER*(MAX_LEN_MBUF) msgBuf
42			CEOP
43
44			NAMELIST /SHELFICE_PARM01/
45			& SHELFICEheatTransCoeff,
46			& SHELFICEsaltTransCoeff,
47			& SHELFICEMassStepping,
48			& rhoShelfice, SHELFICEkappa,
49			& SHELFICElatentHeat, SHELFICEHeatCapacity_Cp,
50			& SHELFICEDragLinear, SHELFICEDragQuadratic,
51			& SHELFICEthetaSurface,
52			& useISOMIPTD, no_slip_shelfice,
53			& SHELFICEconserve, SHELFICEboundaryLayer,
54			& SHELFICEthickBoundaryLayer,
55			& SHELFICErealFWflux,
56			& SHELFICEwriteState,
57			& SHELFICE_dumpFreq,
58			& SHELFICE_taveFreq,
59			& SHELFICE_tave_mnc,
60			& SHELFICE_dump_mnc,
61	dgoldberg	1.4	& SHELFICEtopoFile,
62	dgoldberg	1.1	& SHELFICEmassFile, SHELFICEloadAnomalyFile,
63	dgoldberg	1.4	& SHELFICEMassDynTendFile,
64	dgoldberg	1.1	& SHELFICEDynMassOnly,
65			& SHELFICEadvDiffHeatFlux,
66			& SHELFICEuseGammaFrict,
67			& SHELFICERemeshFrequency,
68			& SHELFICESplitThreshold,
69			& SHELFICEMergeThreshold,
70			& shiCdrag, shiZetaN, shiRc,
71	dgoldberg	1.3	& shiPrandtl, shiSchmidt, shiKinVisc,
72			& shelficeEtaSponge, ShelficeEtaRelax,
73	dgoldberg	1.5	& shelfice_etarestore_spongewidth,
74			& SHELFICE_dig_ice
75	dgoldberg	1.1	#ifdef ALLOW_COST
76			& , mult_shelfice
77			& , mult_shifwflx, wshifwflx0, shifwflx_errfile
78			#endif
79
80			C---+----1----+----2----+----3----+----4----+----5----+----6----+----7-\|--+----\|
81
82			IF ( .NOT.useShelfIce ) THEN
83			C- pkg SHELFICE is not used
84			_BEGIN_MASTER(myThid)
85			C- Track pkg activation status:
86			SHELFICEisOn = .FALSE.
87			C print a (weak) warning if data.shelfice is found
88			CALL PACKAGES_UNUSED_MSG( 'useShelfIce', ' ', ' ' )
89			_END_MASTER(myThid)
90			RETURN
91			ENDIF
92
93			_BEGIN_MASTER(myThid)
94
95			C This routine has been called by the main model so we set our
96			C internal flag to indicate we are in business
97			SHELFICEisOn = .TRUE.
98
99			C Set defaults values for parameters in SHELFICE.h
100			useISOMIPTD = .FALSE.
101			SHELFICEconserve = .FALSE.
102			SHELFICEboundaryLayer = .FALSE.
103			SHELFICEthickBoundaryLayer
104			& = .FALSE.
105			SHELFICErealFWflux = .FALSE.
106			SHELFICEMassStepping = .FALSE.
107			SHELFICEDynMassOnly = .FALSE.
108			SHELFICEtopoFile = ' '
109			SHELFICEmassFile = ' '
110			SHELFICEloadAnomalyFile = ' '
111			SHELFICEMassDynTendFile = ' '
112			SHELFICElatentHeat = 334.0 _d 3
113			SHELFICEHeatCapacity_Cp = 2000.0 _d 0
114			rhoShelfIce = 917.0 _d 0
115			SHELFICEheatTransCoeff = 1.0 _d -04
116			SHELFICEsaltTransCoeff = UNSET_RL
117			SHELFICEkappa = 1.54 _d -06
118			SHELFICEthetaSurface = - 20.0 _d 0
119			no_slip_shelfice = no_slip_bottom
120			SHELFICEDragLinear = bottomDragLinear
121			SHELFICEDragQuadratic = UNSET_RL
122			SHELFICEselectDragQuadr = -1
123			SHELFICEwriteState = .FALSE.
124			SHELFICE_dumpFreq = dumpFreq
125			SHELFICE_taveFreq = taveFreq
126			SHELFICEadvDiffHeatFlux = .FALSE.
127			SHELFICEuseGammaFrict = .FALSE.
128			SHELFICERemeshFrequency = 2592000.
129			SHELFICESplitThreshold = 5
130			SHELFICEMergeThreshold = -8
131	dgoldberg	1.3	shelficeEtaRelax = 0.
132			shelfice_etarestore_spongewidth = 0
133			shelficeEtaSponge = .false.
134	dgoldberg	1.5	SHELFICE_dig_ice = .true.
135	dgoldberg	1.1	C these params. are default of Holland and Jenkins (1999)
136			shiCdrag = 0.0015 _d 0
137			shiZetaN = 0.052 _d 0
138			shiRc = 0.2 _d 0
139			shiPrandtl = 13.8 _d 0
140			shiSchmidt = 2432.0 _d 0
141			shiKinVisc = 1.95 _d -6
142			#ifdef ALLOW_COST
143			mult_shelfice = 0. _d 0
144			mult_shifwflx = 0. _d 0
145			wshifwflx0 = 0. _d 0
146			shifwflx_errfile = ' '
147			#endif
148			#ifdef ALLOW_MNC
149			SHELFICE_tave_mnc = timeave_mnc
150			SHELFICE_dump_mnc = snapshot_mnc
151			#else
152			SHELFICE_tave_mnc = .FALSE.
153			SHELFICE_dump_mnc = .FALSE.
154			#endif
155
156			C Open and read the data.shelfice file
157			WRITE(msgBuf,'(A)') ' SHELFICE_READPARMS: opening data.shelfice'
158			CALL PRINT_MESSAGE(msgBuf, standardMessageUnit,
159			& SQUEEZE_RIGHT, myThid )
160			CALL OPEN_COPY_DATA_FILE(
161			I 'data.shelfice', 'SHELFICE_READPARMS',
162			O iUnit,
163			I myThid )
164			READ(UNIT=iUnit,NML=SHELFICE_PARM01)
165			WRITE(msgBuf,'(A)')
166			& ' SHELFICE_READPARMS: finished reading data.shelfice'
167			CALL PRINT_MESSAGE(msgBuf, standardMessageUnit,
168			& SQUEEZE_RIGHT, myThid )
169
170			C Close the open data file
171			CLOSE(iUnit)
172
173			C Now set-up any remaining parameters that result from the input parameters
174			IF ( SHELFICEsaltTransCoeff .EQ. UNSET_RL )
175			& SHELFICEsaltTransCoeff =
176			& 5.05 _d -3 *SHELFICEheatTransCoeff
177
178			C Set quadratic bottom drag depending on choices:
179			IF ( SHELFICEDragQuadratic .EQ. UNSET_RL) THEN
180			IF ( SHELFICEuseGammaFrict ) THEN
181			SHELFICEDragQuadratic = shiCdrag
182			ELSE
183			SHELFICEDragQuadratic = bottomDragQuadratic
184			ENDIF
185			ENDIF
186			IF ( SHELFICEDragQuadratic.EQ.0. _d 0 ) THEN
187			SHELFICEselectDragQuadr = -1
188			ELSEIF ( SHELFICEselectDragQuadr.EQ.-1 ) THEN
189			SHELFICEselectDragQuadr = MAX( 0, selectBotDragQuadr )
190			ENDIF
191
192			C- Set Output type flags :
193			SHELFICE_tave_mdsio = .TRUE.
194			SHELFICE_dump_mdsio = .TRUE.
195			#ifdef ALLOW_MNC
196			IF (useMNC) THEN
197			IF ( .NOT.outputTypesInclusive
198			& .AND. SHELFICE_tave_mnc ) SHELFICE_tave_mdsio = .FALSE.
199			IF ( .NOT.outputTypesInclusive
200			& .AND. SHELFICE_dump_mnc ) SHELFICE_dump_mdsio = .FALSE.
201			ENDIF
202			#endif
203
204			_END_MASTER(myThid)
205			C Everyone else must wait for the parameters to be loaded
206			_BARRIER
207
208			#endif /* ALLOW_SHELFICE */
209
210			RETURN
211			END