| 1 |
# Diagnostic Package Choices |
| 2 |
#----------------- |
| 3 |
# for each output-stream: |
| 4 |
# filename(n) : prefix of the output file name (only 8.c long) for outp.stream n |
| 5 |
# frequency(n):< 0 : write snap-shot output every multiple of |frequency| (iter) |
| 6 |
# > 0 : write time-average output every multiple of frequency (iter) |
| 7 |
# levels(:,n) : list of levels to write to file (Notes: declared as REAL) |
| 8 |
# when this entry is missing, select all common levels of this list |
| 9 |
# fields(:,n) : list of diagnostics fields (8.c) (see "available_diagnostics" file |
| 10 |
# for the list of all available diag. in this particular config) |
| 11 |
#-------------------------------------------------------------------- |
| 12 |
# |
| 13 |
&diagnostics_list |
| 14 |
# |
| 15 |
dumpatlast = .TRUE., |
| 16 |
#--- |
| 17 |
frequency(1) = 2635200.0, |
| 18 |
fields(1:25,1) = 'ETAN ','SIarea ','SIheff ','SIhsnow ', |
| 19 |
#stuff that is not quite state variables (and may not be quite |
| 20 |
#synchroneous) but are added here to reduce number of files |
| 21 |
'DETADT2 ','PHIBOT ','sIceLoad', |
| 22 |
'MXLDEPTH','oceSPDep', |
| 23 |
'SIatmQnt','SIatmFW ','oceQnet ','oceFWflx', |
| 24 |
'oceTAUX ','oceTAUY ', |
| 25 |
'ADVxHEFF','ADVyHEFF','DFxEHEFF','DFyEHEFF', |
| 26 |
'ADVxSNOW','ADVySNOW','DFxESNOW','DFyESNOW', |
| 27 |
'SIuice ','SIvice ', |
| 28 |
filename(1) = 'diags/state_2d_set1', |
| 29 |
#--- |
| 30 |
frequency(2) = 2635200.0, |
| 31 |
fields(1:3,2) = 'THETA ','SALT ', |
| 32 |
#stuff that is not quite state variables (and may not be quite |
| 33 |
#synchronous) but are added here to reduce file number |
| 34 |
'DRHODR ', |
| 35 |
# 'KPPviscA','KPPdiffT','KPPdiffTS', |
| 36 |
# 'GGL90TKE','GGL90Lmx','GGL90Prl', |
| 37 |
# 'GGL90ArU','GGL90ArV','GGL90Kr ', |
| 38 |
filename(2) = 'diags/state_3d_set1', |
| 39 |
#--- |
| 40 |
frequency(3) = 2635200.0, |
| 41 |
fields(1:5,3) = 'UVELMASS','VVELMASS','WVELMASS', |
| 42 |
'GM_PsiX ','GM_PsiY ', |
| 43 |
#uvel is approximately uvelmass divided by initial hfac, so we dont output the former |
| 44 |
# 'UVEL ','VVEL ','WVEL ', |
| 45 |
#full 3D temperature fluxes : 'DFxE_TH ','DFyE_TH ','DFrE_TH ','DFrI_TH ','ADVx_TH ','ADVy_TH ','ADVr_TH ', |
| 46 |
#but for present computations I only need the vertically integrated horizontal components (see trsp_3d_set2) |
| 47 |
filename(3) = 'diags/trsp_3d_set1', |
| 48 |
#--- |
| 49 |
frequency(4) = 2635200.0, |
| 50 |
fields(1:8,4) = 'DFxE_TH ','DFyE_TH ','ADVx_TH ','ADVy_TH ', |
| 51 |
'DFxE_SLT','DFyE_SLT','ADVx_SLT','ADVy_SLT', |
| 52 |
filename(4) = 'diags/trsp_3d_set2', |
| 53 |
#vertically integrate fields we only use to compute vertically integr. |
| 54 |
#meridional transports (also omit vertical transports, both to save space) |
| 55 |
#--- |
| 56 |
frequency(5) = -2635200.0, |
| 57 |
fields(1:6,5) = 'ETAN ','SIheff ','SIhsnow ', |
| 58 |
'SIarea ','sIceLoad','PHIBOT ', |
| 59 |
filename(5) = 'diags/budg2d_snap_set1', |
| 60 |
timePhase(5)= 0., |
| 61 |
fileFlags(5) = 'D ', |
| 62 |
#--- |
| 63 |
frequency(6) = -2635200.0, |
| 64 |
fields(1:2,6) = 'THETA ','SALT ', |
| 65 |
filename(6) = 'diags/budg2d_snap_set2', |
| 66 |
timePhase(6)= 0., |
| 67 |
fileFlags(6) = 'DI ', |
| 68 |
#--- |
| 69 |
frequency(7) = 2635200.0, |
| 70 |
fields(1:7,7) = 'oceFWflx','SIatmFW ','TFLUX ','SItflux ', |
| 71 |
'SFLUX ','oceQsw ','oceSPflx', |
| 72 |
filename(7) = 'diags/budg2d_zflux_set1', |
| 73 |
fileFlags(7) = 'D ', |
| 74 |
#--- |
| 75 |
frequency(8) = 2635200.0, |
| 76 |
fields(1:13,8) ='UVELMASS','VVELMASS', |
| 77 |
'ADVx_TH ','ADVy_TH ','DFxE_TH ','DFyE_TH ', |
| 78 |
'ADVx_SLT','ADVy_SLT','DFxE_SLT','DFyE_SLT', |
| 79 |
#the following are not transports but tendencies |
| 80 |
'oceSPtnd','AB_gT ','AB_gS ', |
| 81 |
filename(8) = 'diags/budg2d_hflux_set2', |
| 82 |
fileFlags(8) = 'DI ', |
| 83 |
#--- |
| 84 |
frequency(9) = 2635200.0, |
| 85 |
fields(1:8,9) ='ADVxHEFF','ADVyHEFF','DFxEHEFF','DFyEHEFF', |
| 86 |
'ADVxSNOW','ADVySNOW','DFxESNOW','DFyESNOW', |
| 87 |
filename(9) = 'diags/budg2d_hflux_set1', |
| 88 |
fileFlags(9) = 'D ', |
| 89 |
#--- |
| 90 |
# this one is important because it activates the vertical advection diags |
| 91 |
frequency(10) = 2635200.0, |
| 92 |
fields(1:7,10) = 'ADVr_TH ','DFrE_TH ','DFrI_TH ', |
| 93 |
'ADVr_SLT','DFrE_SLT','DFrI_SLT', |
| 94 |
'WVELMASS', |
| 95 |
filename(10) = 'diags/budg2d_zflux_set3_11', |
| 96 |
levels(1, 10)= 11., |
| 97 |
fileFlags(10) = 'D ', |
| 98 |
#--- |
| 99 |
frequency(11) = 2635200.0, |
| 100 |
fields(1:10,11) ='SRELAX ','TRELAX ','WTHMASS ','WSLTMASS', |
| 101 |
'oceSflux','oceQnet ','SIatmQnt', |
| 102 |
'SIaaflux','SIsnPrcp','SIacSubl', |
| 103 |
filename(11) = 'diags/budg2d_zflux_set2', |
| 104 |
fileFlags(11) = 'D ', |
| 105 |
#--- |
| 106 |
frequency(12) = 2635200.0, |
| 107 |
fields(1:13,12) ='UVELMASS','VVELMASS', |
| 108 |
'ADVx_TH ','ADVy_TH ','DFxE_TH ','DFyE_TH ', |
| 109 |
'ADVx_SLT','ADVy_SLT','DFxE_SLT','DFyE_SLT', |
| 110 |
'oceSPtnd','AB_gT ','AB_gS ', |
| 111 |
filename(12) = 'diags/budg2d_hflux_set3_11', |
| 112 |
levels(1:40,12) = 11.,12.,13.,14.,15.,16.,17.,18.,19.,20., |
| 113 |
21.,22.,23.,24.,25.,26.,27.,28.,29.,30., |
| 114 |
31.,32.,33.,34.,35.,36.,37.,38.,39.,40., |
| 115 |
41.,42.,43.,44.,45.,46.,47.,48.,49.,50., |
| 116 |
fileFlags(12) = 'DI ', |
| 117 |
#--- |
| 118 |
frequency(13) = -2635200.0, |
| 119 |
fields(1:2,13) = 'THETA ','SALT ', |
| 120 |
filename(13) = 'diags/budg2d_snap_set3_11', |
| 121 |
timePhase(13)= 0., |
| 122 |
levels(1:40,13) = 11.,12.,13.,14.,15.,16.,17.,18.,19.,20., |
| 123 |
21.,22.,23.,24.,25.,26.,27.,28.,29.,30., |
| 124 |
31.,32.,33.,34.,35.,36.,37.,38.,39.,40., |
| 125 |
41.,42.,43.,44.,45.,46.,47.,48.,49.,50., |
| 126 |
fileFlags(13) = 'DI ', |
| 127 |
#--- |
| 128 |
frequency(14) = 2635200.0, |
| 129 |
fields(1:8,14) = 'DFxE_TH ','DFyE_TH ','ADVx_TH ','ADVy_TH ', |
| 130 |
'DFxE_SLT','DFyE_SLT','ADVx_SLT','ADVy_SLT', |
| 131 |
filename(14) = 'diags/trsp_2d_set1', |
| 132 |
#vertically integrate fields we only use to compute vertically integr. |
| 133 |
#meridional transports (also omit vertical transports, both to save space) |
| 134 |
fileFlags(14) = ' I ', |
| 135 |
#--- |
| 136 |
frequency(15) = 2635200.0, |
| 137 |
fields(1:3,15) = 'RHOAnoma','PHIHYD ','oceSPtnd', |
| 138 |
filename(15) = 'diags/state_3d_set2', |
| 139 |
#--- |
| 140 |
frequency(16) = 2635200.0, |
| 141 |
fields(1:7,16) = 'ADVr_TH ','DFrE_TH ','DFrI_TH ', |
| 142 |
'ADVr_SLT','DFrE_SLT','DFrI_SLT','WVELMASS', |
| 143 |
filename(16) = 'diags/trsp_3d_set3', |
| 144 |
#--- |
| 145 |
frequency(17) = 2635200.0, |
| 146 |
fields(1:7,17) = 'TFLUX ','SItflux ','SFLUX ', |
| 147 |
'oceQsw ','oceSPflx','SIsnPrcp','SIacSubl', |
| 148 |
filename(17) = 'diags/state_2d_set2', |
| 149 |
#--- |
| 150 |
/ |
| 151 |
# |
| 152 |
# |
| 153 |
# Parameter for Diagnostics of per level statistics: |
| 154 |
#----------------- |
| 155 |
# for each output-stream: |
| 156 |
# stat_fname(n) : prefix of the output file name (only 8.c long) for outp.stream n |
| 157 |
# stat_freq(n):< 0 : write snap-shot output every |stat_freq| seconds |
| 158 |
# > 0 : write time-average output every stat_freq seconds |
| 159 |
# stat_phase(n) : write at time = stat_phase + multiple of |stat_freq| |
| 160 |
# stat_region(:,n) : list of "regions" (default: 1 region only=global) |
| 161 |
# stat_fields(:,n) : list of diagnostics fields (8.c) (see "available_diagnostics.log" |
| 162 |
# file for the list of all available diag. in this particular config) |
| 163 |
#----------------- |
| 164 |
&DIAG_STATIS_PARMS |
| 165 |
# diagSt_regMaskFile='basin_masks_eccollc_90x50.bin', |
| 166 |
# nSetRegMskFile=1, |
| 167 |
# set_regMask(1)= 1, 1, 1, 1, 1, 1, 1, 1, 1, |
| 168 |
# 1, 1, 1, 1, 1, 1, 1, 1 |
| 169 |
# val_regMask(1)= 1., 2., 3., 4., 5., 6., 7., 8., 9., |
| 170 |
# 10.,11.,12.,13.,14.,15.,16.,17. |
| 171 |
##--- |
| 172 |
# stat_fields(1,1)= 'ETAN ','ETANSQ ','DETADT2 ', |
| 173 |
# 'UVEL ','VVEL ','WVEL ', |
| 174 |
# 'THETA ','SALT ', |
| 175 |
# stat_fname(1)= 'dynStDiag', |
| 176 |
# stat_freq(1)= 3153600., |
| 177 |
# stat_region(1,1)= 1, 2, 3, 4, 5, 6, 7, 8, 9, |
| 178 |
# 10,11,12,13,14,15,16,17 |
| 179 |
##--- |
| 180 |
# stat_fields(1,2)= 'oceTAUX ','oceTAUY ', |
| 181 |
# 'surForcT','surForcS','TFLUX ','SFLUX ', |
| 182 |
# 'oceQnet ','oceSflux','oceFWflx', |
| 183 |
# stat_fname(2)= 'surfStDiag', |
| 184 |
# stat_freq(2)= 3153600., |
| 185 |
# stat_region(1,2)= 1, 2, 3, 4, 5, 6, 7, 8, 9, |
| 186 |
# 10,11,12,13,14,15,16,17 |
| 187 |
/ |
Parent Directory
| 
Revision Log
| 
Revision Graph