high_res_cube/input/data.diagnostics

# Diagnostic Package Choices
#
# 6-hourly 2-D fields:
# ====================
# 
# oceTAUX  zonal surface wind stress, >0 increases uVel (N/m^2)
# oceTAUY  meridional surf. wind stress, >0 increases vVel (N/m^2)
# oceFWflx net surface Fresh-Water flux into ocean, >0 decreases salinity (kg/m^2/s)
# oceSflux net surface Salt flux into the ocean, >0 increases salinity (g/m^2/s)
# oceQnet  net surface heat flux into the ocean, >0 increases theta (W/m^2)
# oceQsw   net Short-Wave radiation (+=down), >0 increases theta (W/m^2)
# KPPhbl   KPP boundary layer depth, bulk Ri criterion
# MXLDEPTH Mixed layer depth, dT=.8degC density criterion
# SST      Sea Surface Temperature (degC,K)
#
# daily 2-D fields:
# =================
#
# ETAN     Perturbation of Surface (pressure, height) (Pa,m)
# PHIBOT   ocean bottom pressure / top. atmos geo-Potential
# SSS      Sea Surface Salinity (g/kg)
# SIarea   SEAICE fractional ice-covered area [0 to 1]
# SIheff   SEAICE effective ice thickness (m)
# SIuice   SEAICE zonal ice velocity, >0 from West to East (m/s)
# SIvice   SEAICE merid. ice velocity, >0 from South to North (m/s)
# SIhsnow  SEAICE snow thickness (m)
# SIhsalt  SEAICE effective salinity (g/m^2)
#
# 3-day 3-D fields:
# =================
# 
# SALTanom Salt anomaly (=SALT-35; g/kg)
# THETA    Potential Temperature (degC)
# UVELMASS Zonal Mass-Weighted Comp of Velocity (m/s)
# VVELMASS Meridional Mass-Weighted Comp of Velocity (m/s)
# WVELMASS Vertical Mass-Weighted Comp of Velocity (m/s)
#
# monthly 3-D fields:
# ===================
# 
# WTHMASS  Vertical Mass-Weight Transp of Pot Temp (degC.m/s)
# WSLTMASS Vertical Mass-Weight Transp of Salinity (PSU.m/s)
# ADVr_TH  Vertical   Advective Flux of Pot.Temperature (degC.m^3/s)
# ADVx_TH  Zonal      Advective Flux of Pot.Temperature (degC.m^3/s)
# ADVy_TH  Meridional Advective Flux of Pot.Temperature (degC.m^3/s)
# DFrI_TH  Vertical Diffusive Flux of Pot.Temperature (Implicit part)
# ADVr_SLT Vertical   Advective Flux of Salinity
# ADVx_SLT Zonal      Advective Flux of Salinity
# ADVy_SLT Meridional Advective Flux of Salinity
# DFrI_SLT Vertical Diffusive Flux of Salinity    (Implicit part)
# KPPdiffT Vertical diffusion coefficient for heat
# KPPghat  Nonlocal transport coefficient
# KPPfrac  Short-wave flux fraction penetrating mixing layer
#
 &diagnostics_list
   frequency(1)  = 21600.,
    fields(1,1)  = 'oceTAUX ',
    filename(1)  = 'oceTAUX',
   frequency(2)  = 21600.,
    fields(1,2)  = 'oceTAUY ',
    filename(2)  = 'oceTAUY',
   frequency(3)  = 21600.,
    fields(1,3)  = 'oceFWflx',
    filename(3)  = 'oceFWflx',
   frequency(4)  = 21600.,
    fields(1,4)  = 'oceSflux',
    filename(4)  = 'oceSflux',
   frequency(5)  = 21600.,
    fields(1,5)  = 'oceQnet ',
    filename(5)  = 'oceQnet',
   frequency(6)  = 21600.,
    fields(1,6)  = 'oceQsw  ',
    filename(6)  = 'oceQsw',
   frequency(7)  = 21600.,
    fields(1,7)  = 'KPPhbl  ',
    filename(7)  = 'KPPhbl',
   frequency(8)  = 21600.,
    fields(1,8)  = 'MXLDEPTH',
    filename(8)  = 'MXLDEPTH',
   frequency(9)  = 21600.,
    fields(1,9)  = 'THETA   ',
    levels(1,9)  = 1.,
    filename(9)  = 'SST',
   frequency(10) = 86400.,
    fields(1,10) = 'ETAN    ',
    filename(10) = 'ETAN',
   frequency(11) = 86400.,
    fields(1,11) = 'PHIBOT  ',
    filename(11) = 'PHIBOT',
   frequency(12) = 86400.,
    fields(1,12) = 'SALT    ',
    levels(1,12) = 1.,
    filename(12) = 'SSS',
   frequency(13) = 86400.,
    fields(1,13) = 'SIarea  ',
    filename(13) = 'SIarea',
   frequency(14) = 86400.,
    fields(1,14) = 'SIheff  ',
    filename(14) = 'SIheff',
   frequency(15) = 86400.,
    fields(1,15) = 'SIuice  ',
    filename(15) = 'SIuice',
   frequency(16) = 86400.,
    fields(1,16) = 'SIvice  ',
    filename(16) = 'SIvice',
   frequency(17) = 86400.,
    fields(1,17) = 'SIhsnow ',
    filename(17) = 'SIhsnow',
   frequency(18) = 86400.,
    fields(1,18) = 'SIhsalt ',
    filename(18) = 'SIhsalt',
   frequency(19) = 259200.,
    fields(1,19) = 'SALTanom',
    filename(19) = 'SALTanom',
   frequency(20) = 259200.,
    fields(1,20) = 'THETA   ',
    filename(20) = 'THETA',
   frequency(21) = 259200.,
    fields(1,21) = 'UVELMASS',
    filename(21) = 'UVELMASS',
   frequency(22) = 259200.,
    fields(1,22) = 'VVELMASS',
    filename(22) = 'VVELMASS',
   frequency(23) = 259200.,
    fields(1,23) = 'WVELMASS',
    filename(23) = 'WVELMASS',
   frequency(24) = 2635200.,
    fields(1,24) = 'WTHMASS ',
    filename(24) = 'WTHMASS',
   frequency(25) = 2635200.,
    fields(1,25) = 'WSLTMASS',
    filename(25) = 'WSLTMASS',
   frequency(26) = 2635200.,
    fields(1,26) = 'ADVr_TH ',
    filename(26) = 'ADVr_TH',
   frequency(27) = 2635200.,
    fields(1,27) = 'ADVx_TH ',
    filename(27) = 'ADVx_TH',
   frequency(28) = 2635200.,
    fields(1,28) = 'ADVy_TH ',
    filename(28) = 'ADVy_TH',
   frequency(29) = 2635200.,
    fields(1,29) = 'DFrI_TH ',
    filename(29) = 'DFrI_TH'
   frequency(30) = 2635200.,
    fields(1,30) = 'ADVr_SLT',
    filename(30) = 'ADVr_SLT',
   frequency(31) = 2635200.,
    fields(1,31) = 'ADVx_SLT',
    filename(31) = 'ADVx_SLT',
   frequency(32) = 2635200.,
    fields(1,32) = 'ADVy_SLT',
    filename(32) = 'ADVy_SLT',
   frequency(33) = 2635200.,
    fields(1,33) = 'DFrI_SLT',
    filename(33) = 'DFrI_SLT'
   frequency(34) = 2635200.,
    fields(1,34) = 'KPPdiffT',
    filename(34) = 'KPPdiffT',
   frequency(35) = 2635200.,
    fields(1,35) = 'KPPghat ',
    filename(35) = 'KPPghat',
   frequency(36) = 2635200.,
    fields(1,36) = 'KPPfrac ',
    filename(36) = 'KPPfrac',
 &

# Parameter for Diagnostics of per level statistics:
#-----------------
# for each output-stream:
#  stat_fname(n) : prefix of the output file name (only 8.c long) for
#outp.stream n
#  stat_freq(n):< 0 : write snap-shot output every |stat_freq| seconds
#               > 0 : write time-average output every stat_freq seconds
#  stat_phase(n)    : write at time = stat_phase + multiple of |stat_freq|
#  stat_region(:,n) : list of "regions" (default: 1 region only=global)
#  stat_fields(:,n) : list of diagnostics fields (8.c) (see
#"available_diagnostics.log"
#                 file for the list of all available diag. in this particular
#config)
#-----------------
 &DIAG_STATIS_PARMS
#- an example just to check the agreement with MONITOR output:
#stat_fields(1,1)= 'ETAN    ','UVEL    ','VVEL    ','WVEL    ', 'THETA   ',
#   stat_fname(1)= 'dynStDiag',
#    stat_freq(1)= -864000.,
#   stat_phase(1)= 0.,
 &
1	dimitri	1.1	# Diagnostic Package Choices
2			#
3			# 6-hourly 2-D fields:
4			# ====================
5			#
6	dimitri	1.11	# oceTAUX zonal surface wind stress, >0 increases uVel (N/m^2)
7			# oceTAUY meridional surf. wind stress, >0 increases vVel (N/m^2)
8	dimitri	1.17	# oceFWflx net surface Fresh-Water flux into ocean, >0 decreases salinity (kg/m^2/s)
9			# oceSflux net surface Salt flux into the ocean, >0 increases salinity (g/m^2/s)
10			# oceQnet net surface heat flux into the ocean, >0 increases theta (W/m^2)
11	dimitri	1.11	# oceQsw net Short-Wave radiation (+=down), >0 increases theta (W/m^2)
12	dimitri	1.5	# KPPhbl KPP boundary layer depth, bulk Ri criterion
13	dimitri	1.17	# MXLDEPTH Mixed layer depth, dT=.8degC density criterion
14	dimitri	1.5	# SST Sea Surface Temperature (degC,K)
15			#
16	dimitri	1.10	# daily 2-D fields:
17			# =================
18			#
19	dimitri	1.17	# ETAN Perturbation of Surface (pressure, height) (Pa,m)
20			# PHIBOT ocean bottom pressure / top. atmos geo-Potential
21			# SSS Sea Surface Salinity (g/kg)
22	dimitri	1.10	# SIarea SEAICE fractional ice-covered area [0 to 1]
23			# SIheff SEAICE effective ice thickness (m)
24			# SIuice SEAICE zonal ice velocity, >0 from West to East (m/s)
25			# SIvice SEAICE merid. ice velocity, >0 from South to North (m/s)
26			# SIhsnow SEAICE snow thickness (m)
27	dimitri	1.14	# SIhsalt SEAICE effective salinity (g/m^2)
28			#
29	dimitri	1.17	# 3-day 3-D fields:
30			# =================
31	dimitri	1.1	#
32	dimitri	1.5	# SALTanom Salt anomaly (=SALT-35; g/kg)
33	dimitri	1.19	# THETA Potential Temperature (degC)
34	dimitri	1.1	# UVELMASS Zonal Mass-Weighted Comp of Velocity (m/s)
35			# VVELMASS Meridional Mass-Weighted Comp of Velocity (m/s)
36			# WVELMASS Vertical Mass-Weighted Comp of Velocity (m/s)
37			#
38	dimitri	1.18	# monthly 3-D fields:
39			# ===================
40			#
41	dimitri	1.19	# WTHMASS Vertical Mass-Weight Transp of Pot Temp (degC.m/s)
42			# WSLTMASS Vertical Mass-Weight Transp of Salinity (PSU.m/s)
43			# ADVr_TH Vertical Advective Flux of Pot.Temperature (degC.m^3/s)
44			# ADVx_TH Zonal Advective Flux of Pot.Temperature (degC.m^3/s)
45			# ADVy_TH Meridional Advective Flux of Pot.Temperature (degC.m^3/s)
46	dimitri	1.18	# DFrI_TH Vertical Diffusive Flux of Pot.Temperature (Implicit part)
47			# ADVr_SLT Vertical Advective Flux of Salinity
48			# ADVx_SLT Zonal Advective Flux of Salinity
49			# ADVy_SLT Meridional Advective Flux of Salinity
50			# DFrI_SLT Vertical Diffusive Flux of Salinity (Implicit part)
51			# KPPdiffT Vertical diffusion coefficient for heat
52			# KPPghat Nonlocal transport coefficient
53			# KPPfrac Short-wave flux fraction penetrating mixing layer
54			#
55	dimitri	1.1	&diagnostics_list
56	dimitri	1.18	frequency(1) = 21600.,
57			fields(1,1) = 'oceTAUX ',
58			filename(1) = 'oceTAUX',
59			frequency(2) = 21600.,
60			fields(1,2) = 'oceTAUY ',
61			filename(2) = 'oceTAUY',
62			frequency(3) = 21600.,
63			fields(1,3) = 'oceFWflx',
64			filename(3) = 'oceFWflx',
65			frequency(4) = 21600.,
66			fields(1,4) = 'oceSflux',
67			filename(4) = 'oceSflux',
68			frequency(5) = 21600.,
69			fields(1,5) = 'oceQnet ',
70			filename(5) = 'oceQnet',
71			frequency(6) = 21600.,
72			fields(1,6) = 'oceQsw ',
73			filename(6) = 'oceQsw',
74			frequency(7) = 21600.,
75			fields(1,7) = 'KPPhbl ',
76			filename(7) = 'KPPhbl',
77			frequency(8) = 21600.,
78			fields(1,8) = 'MXLDEPTH',
79			filename(8) = 'MXLDEPTH',
80			frequency(9) = 21600.,
81			fields(1,9) = 'THETA ',
82			levels(1,9) = 1.,
83			filename(9) = 'SST',
84			frequency(10) = 86400.,
85			fields(1,10) = 'ETAN ',
86			filename(10) = 'ETAN',
87			frequency(11) = 86400.,
88			fields(1,11) = 'PHIBOT ',
89			filename(11) = 'PHIBOT',
90			frequency(12) = 86400.,
91			fields(1,12) = 'SALT ',
92			levels(1,12) = 1.,
93			filename(12) = 'SSS',
94			frequency(13) = 86400.,
95			fields(1,13) = 'SIarea ',
96			filename(13) = 'SIarea',
97			frequency(14) = 86400.,
98			fields(1,14) = 'SIheff ',
99			filename(14) = 'SIheff',
100			frequency(15) = 86400.,
101			fields(1,15) = 'SIuice ',
102			filename(15) = 'SIuice',
103			frequency(16) = 86400.,
104			fields(1,16) = 'SIvice ',
105			filename(16) = 'SIvice',
106			frequency(17) = 86400.,
107			fields(1,17) = 'SIhsnow ',
108			filename(17) = 'SIhsnow',
109			frequency(18) = 86400.,
110			fields(1,18) = 'SIhsalt ',
111			filename(18) = 'SIhsalt',
112			frequency(19) = 259200.,
113			fields(1,19) = 'SALTanom',
114			filename(19) = 'SALTanom',
115			frequency(20) = 259200.,
116			fields(1,20) = 'THETA ',
117			filename(20) = 'THETA',
118			frequency(21) = 259200.,
119			fields(1,21) = 'UVELMASS',
120			filename(21) = 'UVELMASS',
121			frequency(22) = 259200.,
122			fields(1,22) = 'VVELMASS',
123			filename(22) = 'VVELMASS',
124			frequency(23) = 259200.,
125			fields(1,23) = 'WVELMASS',
126			filename(23) = 'WVELMASS',
127			frequency(24) = 2635200.,
128	dimitri	1.19	fields(1,24) = 'WTHMASS ',
129			filename(24) = 'WTHMASS',
130	dimitri	1.18	frequency(25) = 2635200.,
131	dimitri	1.19	fields(1,25) = 'WSLTMASS',
132			filename(25) = 'WSLTMASS',
133	dimitri	1.18	frequency(26) = 2635200.,
134	dimitri	1.19	fields(1,26) = 'ADVr_TH ',
135			filename(26) = 'ADVr_TH',
136	dimitri	1.18	frequency(27) = 2635200.,
137	dimitri	1.19	fields(1,27) = 'ADVx_TH ',
138			filename(27) = 'ADVx_TH',
139	dimitri	1.18	frequency(28) = 2635200.,
140	dimitri	1.19	fields(1,28) = 'ADVy_TH ',
141			filename(28) = 'ADVy_TH',
142	dimitri	1.18	frequency(29) = 2635200.,
143	dimitri	1.19	fields(1,29) = 'DFrI_TH ',
144			filename(29) = 'DFrI_TH'
145	dimitri	1.18	frequency(30) = 2635200.,
146	dimitri	1.19	fields(1,30) = 'ADVr_SLT',
147			filename(30) = 'ADVr_SLT',
148	dimitri	1.18	frequency(31) = 2635200.,
149	dimitri	1.19	fields(1,31) = 'ADVx_SLT',
150			filename(31) = 'ADVx_SLT',
151	dimitri	1.18	frequency(32) = 2635200.,
152	dimitri	1.19	fields(1,32) = 'ADVy_SLT',
153			filename(32) = 'ADVy_SLT',
154	dimitri	1.18	frequency(33) = 2635200.,
155	dimitri	1.19	fields(1,33) = 'DFrI_SLT',
156			filename(33) = 'DFrI_SLT'
157	dimitri	1.18	frequency(34) = 2635200.,
158	dimitri	1.19	fields(1,34) = 'KPPdiffT',
159			filename(34) = 'KPPdiffT',
160	dimitri	1.18	frequency(35) = 2635200.,
161	dimitri	1.19	fields(1,35) = 'KPPghat ',
162			filename(35) = 'KPPghat',
163	dimitri	1.18	frequency(36) = 2635200.,
164	dimitri	1.19	fields(1,36) = 'KPPfrac ',
165			filename(36) = 'KPPfrac',
166	dimitri	1.5	&
167
168			# Parameter for Diagnostics of per level statistics:
169			#-----------------
170			# for each output-stream:
171			# stat_fname(n) : prefix of the output file name (only 8.c long) for
172			#outp.stream n
173			# stat_freq(n):< 0 : write snap-shot output every \|stat_freq\| seconds
174			# > 0 : write time-average output every stat_freq seconds
175			# stat_phase(n) : write at time = stat_phase + multiple of \|stat_freq\|
176			# stat_region(:,n) : list of "regions" (default: 1 region only=global)
177			# stat_fields(:,n) : list of diagnostics fields (8.c) (see
178			#"available_diagnostics.log"
179			# file for the list of all available diag. in this particular
180			#config)
181			#-----------------
182			&DIAG_STATIS_PARMS
183			#- an example just to check the agreement with MONITOR output:
184			#stat_fields(1,1)= 'ETAN ','UVEL ','VVEL ','WVEL ', 'THETA ',
185			# stat_fname(1)= 'dynStDiag',
186			# stat_freq(1)= -864000.,
187			# stat_phase(1)= 0.,
188			&