Parent Directory
| 
Revision Log
| 
Revision Graph
Adding prototype ECCO2 CS510 adjoint state estimation config.
| 1 | heimbach | 1.1 | # |
| 2 | # | ||
| 3 | # ****************** | ||
| 4 | # ECCO cost function | ||
| 5 | # ****************** | ||
| 6 | &ECCO_COST_NML | ||
| 7 | data_errfile = 'data.err', | ||
| 8 | tbarfile = 'tbar', | ||
| 9 | sbarfile = 'sbar', | ||
| 10 | psbarfile = 'psbar', | ||
| 11 | ubarfile = 'ubar', | ||
| 12 | vbarfile = 'vbar', | ||
| 13 | hfluxbarfile = 'hfluxbar', | ||
| 14 | sfluxbarfile = 'sfluxbar', | ||
| 15 | # | ||
| 16 | tdatfile = 'WOA05_THETA_510x6x510x50.bin', | ||
| 17 | sdatfile = 'WOA05_SALT_510x6x510x50.bin', | ||
| 18 | # | ||
| 19 | whflux0 = 20.0, | ||
| 20 | wsflux0 = 3.0E-8, | ||
| 21 | wtau0 = 2.0E-2, | ||
| 22 | watemp0 = 1.0, | ||
| 23 | waqh0 = 0.5E-3, | ||
| 24 | wprecip0 = 1.5E-8, | ||
| 25 | wswflux0 = 15.0, | ||
| 26 | wswdown0 = 15.0, | ||
| 27 | wwind0 = 1.0, | ||
| 28 | # | ||
| 29 | wmean_hflux = 60.0, | ||
| 30 | wmean_sflux = 3.2E-8, | ||
| 31 | wmean_tau = 0.2, | ||
| 32 | # | ||
| 33 | wmean_atemp = 8.0, | ||
| 34 | wmean_aqh = 4.0E-3, | ||
| 35 | wmean_precip = 9.0E-8, | ||
| 36 | wmean_swflux = 90.0, | ||
| 37 | wmean_swdown = 90.0, | ||
| 38 | wmean_wind = 8.0, | ||
| 39 | # | ||
| 40 | mult_hflux = 1., | ||
| 41 | mult_sflux = 1., | ||
| 42 | mult_tauu = 1., | ||
| 43 | mult_tauv = 1., | ||
| 44 | # | ||
| 45 | mult_atemp = 0.2, | ||
| 46 | mult_aqh = 0.2, | ||
| 47 | mult_uwind = 0.2, | ||
| 48 | mult_vwind = 0.2, | ||
| 49 | mult_precip = 0.2, | ||
| 50 | mult_swflux = 0.2, | ||
| 51 | mult_swdown = 0.2, | ||
| 52 | # | ||
| 53 | mult_temp = 1., | ||
| 54 | mult_salt = 1., | ||
| 55 | mult_temp0 = 1., | ||
| 56 | mult_salt0 = 1., | ||
| 57 | # | ||
| 58 | cost_iprec = 32, | ||
| 59 | cost_yftype = 'RL', | ||
| 60 | # | ||
| 61 | & |
| ViewVC Help | |
| Powered by ViewVC 1.1.22 |