ice_only_estimation/input/data.exf

 # $Header: /u/gcmpack/MITgcm/verification/lab_sea/input/data.exf,v 1.7 2004/07/11 06:21:44 dimitri Exp $
#
# *********************
# External Forcing Data
# *********************
 &EXF_NML
#
 useExfCheckRange  = .TRUE.,
 repeatPeriod      = 31622400.0,

 atempstartdate1   = 20000101,
 atempstartdate2   = 0,
 atempperiod       = 21600.0,
#
 aqhstartdate1     = 20000101,
 aqhstartdate2     = 0,
 aqhperiod         = 21600.0,
#
 evapstartdate1    = 20000101,
 evapstartdate2    = 0,
 evapperiod        = 21600.0,
#
 precipstartdate1  = 20000101,
 precipstartdate2  = 0,
 precipperiod      = 21600.0,
#
 uwindstartdate1   = 20000101,
 uwindstartdate2   = 0,
 uwindperiod       = 21600.0,
#
 vwindstartdate1   = 20000101,
 vwindstartdate2   = 0,
 vwindperiod       = 21600.0,
#
 swdownstartdate1  = 20000101,
 swdownstartdate2  = 0,
 swdownperiod      = 21600.0,
#
 lwdownstartdate1  = 20000101,
 lwdownstartdate2  = 0,
 lwdownperiod      = 21600.0,
#
 swfluxstartdate1  = 20000101,
 swfluxstartdate2  = 0,
 swfluxperiod      = 21600.0,
#
 lwfluxstartdate1  = 20000101,
 lwfluxstartdate2  = 0,
 lwfluxperiod      = 21600.0,
#

 hfluxfile         = ' ',
 sfluxfile         = ' ',

 ustressfile       = ' ',
 vstressfile       = ' ',

# I DON'T THINK I SHOULD SPECIFY THE STRESSES TOO
# ustressfile       = 'LABSEA_NCEP_R6_ustr_2000',
# vstressfile       = 'LABSEA_NCEP_R6_vstr_2000',

# atempfile         = 'tair.labsea1979',
 atempfile         = 'LABSEA_NCEP_R6_tmp2m_degC_2000',

# aqhfile           = 'qa.labsea1979',
 aqhfile           = 'LABSEA_NCEP_R6_spfh2m_2000',

# uwindfile         = 'u10m.labsea79',
 uwindfile         = 'LABSEA_NCEP_R6_u10m_2000',

# vwindfile         = 'v10m.labsea79',
 vwindfile         = 'LABSEA_NCEP_R6_v10m_2000',

# evapfile          = 'evap.labsea1979',
evapfile          = ' ',

# precipfile        = 'prate.labsea1979',
 precipfile        = 'LABSEA_NCEP_R6_rain_2000',

# REMOVE THE FLUX FILE
# lwfluxfile        = LABSEA_NCEP_R6_lw_2000',
# swfluxfile        = LABSEA_NCEP_R6_sw_2000',

# ADD THE UP/DOWN FILE
lwdownfile        = 'LABSEA_NCEP_R6_dlw_2000',
swdownfile        = 'LABSEA_NCEP_R6_dsw_2000',

 runoffFile        = ' '

 obcsNstartdate1   =20000101,
 obcsNstartdate2   =60000,
 obcsNperiod       =2635200.0,

 obcsSstartdate1   =20000101,
 obcsSstartdate2   =60000,
 obcsSperiod       =2635200.0,

 obcsEstartdate1   =20000101,
 obcsEstartdate2   =60000,
 obcsEperiod       =2635200.0,

 obcsWstartdate1   =20000101,
 obcsWstartdate2   =60000,
 obcsWperiod       =2635200.0,

#-=-=- Ian 170305 -=-=-#
 exf_offset_atemp  = 273.15,

 exf_iprec         = 32,
 exf_yftype        = 'RL',
 &
1	# $Header: /u/gcmpack/MITgcm/verification/lab_sea/input/data.exf,v 1.7 2004/07/11 06:21:44 dimitri Exp $
2	#
3	# *********************
4	# External Forcing Data
5	# *********************
6	&EXF_NML
7	#
8	useExfCheckRange = .TRUE.,
9	repeatPeriod = 31622400.0,
10
11	atempstartdate1 = 20000101,
12	atempstartdate2 = 0,
13	atempperiod = 21600.0,
14	#
15	aqhstartdate1 = 20000101,
16	aqhstartdate2 = 0,
17	aqhperiod = 21600.0,
18	#
19	evapstartdate1 = 20000101,
20	evapstartdate2 = 0,
21	evapperiod = 21600.0,
22	#
23	precipstartdate1 = 20000101,
24	precipstartdate2 = 0,
25	precipperiod = 21600.0,
26	#
27	uwindstartdate1 = 20000101,
28	uwindstartdate2 = 0,
29	uwindperiod = 21600.0,
30	#
31	vwindstartdate1 = 20000101,
32	vwindstartdate2 = 0,
33	vwindperiod = 21600.0,
34	#
35	swdownstartdate1 = 20000101,
36	swdownstartdate2 = 0,
37	swdownperiod = 21600.0,
38	#
39	lwdownstartdate1 = 20000101,
40	lwdownstartdate2 = 0,
41	lwdownperiod = 21600.0,
42	#
43	swfluxstartdate1 = 20000101,
44	swfluxstartdate2 = 0,
45	swfluxperiod = 21600.0,
46	#
47	lwfluxstartdate1 = 20000101,
48	lwfluxstartdate2 = 0,
49	lwfluxperiod = 21600.0,
50	#
51
52	hfluxfile = ' ',
53	sfluxfile = ' ',
54
55	ustressfile = ' ',
56	vstressfile = ' ',
57
58	# I DON'T THINK I SHOULD SPECIFY THE STRESSES TOO
59	# ustressfile = 'LABSEA_NCEP_R6_ustr_2000',
60	# vstressfile = 'LABSEA_NCEP_R6_vstr_2000',
61
62	# atempfile = 'tair.labsea1979',
63	atempfile = 'LABSEA_NCEP_R6_tmp2m_degC_2000',
64
65	# aqhfile = 'qa.labsea1979',
66	aqhfile = 'LABSEA_NCEP_R6_spfh2m_2000',
67
68	# uwindfile = 'u10m.labsea79',
69	uwindfile = 'LABSEA_NCEP_R6_u10m_2000',
70
71	# vwindfile = 'v10m.labsea79',
72	vwindfile = 'LABSEA_NCEP_R6_v10m_2000',
73
74	# evapfile = 'evap.labsea1979',
75	evapfile = ' ',
76
77	# precipfile = 'prate.labsea1979',
78	precipfile = 'LABSEA_NCEP_R6_rain_2000',
79
80	# REMOVE THE FLUX FILE
81	# lwfluxfile = LABSEA_NCEP_R6_lw_2000',
82	# swfluxfile = LABSEA_NCEP_R6_sw_2000',
83
84	# ADD THE UP/DOWN FILE
85	lwdownfile = 'LABSEA_NCEP_R6_dlw_2000',
86	swdownfile = 'LABSEA_NCEP_R6_dsw_2000',
87
88	runoffFile = ' '
89
90	obcsNstartdate1 =20000101,
91	obcsNstartdate2 =60000,
92	obcsNperiod =2635200.0,
93
94	obcsSstartdate1 =20000101,
95	obcsSstartdate2 =60000,
96	obcsSperiod =2635200.0,
97
98	obcsEstartdate1 =20000101,
99	obcsEstartdate2 =60000,
100	obcsEperiod =2635200.0,
101
102	obcsWstartdate1 =20000101,
103	obcsWstartdate2 =60000,
104	obcsWperiod =2635200.0,
105
106	#-=-=- Ian 170305 -=-=-#
107	exf_offset_atemp = 273.15,
108
109	exf_iprec = 32,
110	exf_yftype = 'RL',
111	&