/[MITgcm]/MITgcm_contrib/arctic/cs_4km/input/data.diagnostics_thsice
ViewVC logotype

Contents of /MITgcm_contrib/arctic/cs_4km/input/data.diagnostics_thsice

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.1 - (show annotations) (download)
Tue Dec 24 00:52:27 2013 UTC (11 years, 7 months ago) by dimitri
Branch: MAIN
CVS Tags: HEAD
adding configuration for 4-km cube-sphere Arctic set-up

1 # Diagnostic Package Choices
2 #
3 # daily 2-D fields:
4 # ====================
5 #
6 # ETAN Perturbation of Surface (pressure, height) (Pa,m)
7 # PHIBOT ocean bottom pressure / top. atmos geo-Potential
8 # oceTAUX zonal surface wind stress, >0 increases uVel (N/m^2)
9 # oceTAUY meridional surf. wind stress, >0 increases vVel (N/m^2)
10 # surForcT model surface forcing for Temperature, >0 increases theta (W/m^2)
11 # oceQsw net Short-Wave radiation (+=down), >0 increases theta (W/m^2)
12 # surForcS model surface forcing for Salinity, >0 increases salinity (g/m^2/s)
13 # KPPhbl KPP boundary layer depth, bulk Ri criterion
14 # SSS Sea Surface Salinity (g/kg)
15 # SST Sea Surface Temperature (degC,K)
16 # UVEL_k1 Zonal Component of Velocity at level 1 (m/s)
17 # VVEL_k1 Meridional Component of Velocity at level 1 (m/s)
18 # SIarea SEAICE fractional ice-covered area [0 to 1]
19 # SIheff SEAICE effective ice thickness (m)
20 # SIuice SEAICE zonal ice velocity, >0 from West to East (m/s)
21 # SIvice SEAICE merid. ice velocity, >0 from South to North (m/s)
22 # SIhsnow SEAICE snow thickness (m)
23 # SIhsalt SEAICE effective salinity (g/m^2)
24 # oceSPflx net surface Salt flux rejected into the ocean during freezing (g/m^2/s), (+=down)
25 # oceSPDep Salt plume depth based on density criterion (>0) (m)
26 #
27 #
28 # monthly 2-D fields:
29 # ===================
30 # EXFhl Latent heat flux into ocean, >0 increases theta (W/m^2)
31 # EXFhs Sensible heat flux into ocean, >0 increases theta (W/m^2)
32 # oceFWflx net surface Fresh-Water flux into ocean, >0 decreases salinity (kg/m^2/s)
33 # oceQnet net surface heat flux into the ocean, >0 increases theta (W/m^2)
34 #
35 #
36 # 3-daily 3-D fields:
37 # ===================
38 #
39 # SALTanom Salt anomaly (=SALT-35; g/kg)
40 # THETA Potential Temperature (degC,K)
41 # UVELMASS Zonal Mass-Weighted Comp of Velocity (m/s)
42 # VVELMASS Meridional Mass-Weighted Comp of Velocity (m/s)
43 #
44 # monthly 3-D fields:
45 # ===================
46 #
47 # ADVr_TH degC.m^3/s Vertical Advective Flux of Pot.Temperature
48 # DFrI_TH degC.m^3/s Vertical Diffusive Flux of Pot.Temperature (Implicit part)
49 #
50 &diagnostics_list
51 frequency(1) = 86400.,
52 fields(1,1) = 'ETAN ',
53 filename(1) = 'ETAN',
54 # frequency(2) = 259200.,
55 # fields(1,2) = 'PHIBOT ',
56 # filename(2) = 'PHIBOT',
57 # frequency(3) = 2635200.,
58 # fields(1,3) = 'oceTAUX ',
59 # filename(3) = 'oceTAUX',
60 # frequency(4) = 2635200.,
61 # fields(1,4) = 'oceTAUY ',
62 # filename(4) = 'oceTAUY',
63 # frequency(5) = 86400.,
64 # fields(1,5) = 'surForcT',
65 # filename(5) = 'surForcT',
66 # frequency(6) = 2635200.,
67 # fields(1,6) = 'oceQsw ',
68 # filename(6) = 'oceQsw',
69 # frequency(7) = 86400.,
70 # fields(1,7) = 'surForcS',
71 # filename(7) = 'surForcS',
72 # frequency(8) = 259200.,
73 # fields(1,8) = 'KPPhbl ',
74 # filename(8) = 'KPPhbl',
75 frequency(9) = 86400.,
76 fields(1,9) = 'SALT ',
77 levels(1,9) = 1.,
78 filename(9) = 'SSS',
79 frequency(10) = 86400.,
80 fields(1,10) = 'THETA ',
81 levels(1,10) = 1.,
82 filename(10) = 'SST',
83 frequency(11) = 86400.,
84 fields(1,11) = 'UVEL ',
85 levels(1,11) = 1.,
86 filename(11) = 'UVEL_k1',
87 frequency(12) = 86400.,
88 fields(1,12) = 'VVEL ',
89 levels(1,12) = 1.,
90 filename(12) = 'VVEL_k1',
91 frequency(13) = 86400.,
92 fields(1,13) = 'SI_Fract',
93 filename(13) = 'SI_Fract',
94 frequency(14) = 86400.,
95 fields(1,14) = 'SI_Thick',
96 filename(14) = 'SI_Thick',
97 # frequency(15) = 86400.,
98 # fields(1,15) = 'SIuice ',
99 # filename(15) = 'SIuice',
100 # frequency(16) = 86400.,
101 # fields(1,16) = 'SIvice ',
102 # filename(16) = 'SIvice',
103 # frequency(15) = 86400.,
104 # fields(1,15) = 'SI_AdvFr',
105 # filename(15) = 'SI_AdvFr',
106 # frequency(16) = 86400.,
107 # fields(1,16) = 'SI_AdvHi',
108 # filename(16) = 'SI_AdvHi',
109 # frequency(17) = 86400.,
110 # fields(1,17) = 'SI_SnowH',
111 # filename(17) = 'SI_SnowH',
112 # frequency(18) = 86400.,
113 # fields(1,18) = 'SI_AdvHs',
114 # filename(18) = 'SI_AdvHs',
115 # frequency(33) = 86400.,
116 # fields(1,33) = 'SI_Qice1',
117 # filename(33) = 'SI_Qice1',
118 # frequency(34) = 86400.,
119 # fields(1,34) = 'SI_Qice2',
120 # filename(34) = 'SI_Qice2',
121 # frequency(35) = 86400.,
122 # fields(1,35) = 'SI_AdvQ1',
123 # filename(35) = 'SI_AdvQ1',
124 # frequency(36) = 86400.,
125 # fields(1,36) = 'SI_AdvQ2',
126 # filename(36) = 'SI_AdvQ2',
127 # frequency(27) = 86400.,
128 # fields(1,27) = 'SIsaltFx',
129 # filename(27) = 'SIsaltFx',
130 # frequency(28) = 86400.,
131 # fields(1,28) = 'SIflx2oc',
132 # filename(28) = 'SIflx2oc',
133 frequency(19) = 2635200.,
134 fields(1,19) = 'SALTanom',
135 filename(19) = 'SALTanom',
136 frequency(20) = 2635200.,
137 fields(1,20) = 'THETA ',
138 filename(20) = 'THETA',
139 frequency(21) = 2635200.,
140 fields(1,21) = 'UVELMASS',
141 filename(21) = 'UVELMASS',
142 frequency(22) = 2635200.,
143 fields(1,22) = 'VVELMASS',
144 filename(22) = 'VVELMASS',
145 frequency(23) = 2635200.,
146 fields(1,23) = 'WVELMASS',
147 filename(23) = 'WVELMASS',
148 # frequency(23) = 2635200.,
149 # fields(1,23) = 'oceFWflx',
150 # filename(23) = 'oceFWflx',
151 # frequency(24) = 2635200.,
152 # fields(1,24) = 'oceQnet ',
153 # filename(24) = 'oceQnet',
154 # frequency(25) = 2635200.,
155 # fields(1,25) = 'oceSflux',
156 # filename(25) = 'oceSflux',
157 # frequency(26) = 2635200.,
158 # fields(1,26) = 'oceFreez',
159 # filename(26) = 'oceFreez',
160 # frequency(25) = 86400.,
161 # fields(1,25) = 'EXFhl ',
162 # filename(25) = 'EXFhl',
163 # frequency(26) = 86400.,
164 # fields(1,26) = 'EXFhs ',
165 # filename(26) = 'EXFhs',
166 # frequency(29) = 2635200.,
167 # fields(1,29) = 'ADVr_TH ',
168 # filename(29) = 'ADVr_TH',
169 # frequency(30) = 2635200.,
170 # fields(1,30) = 'WTHMASS ',
171 # filename(30) = 'WTHMASS',
172 # frequency(31) = 2635200.,
173 # fields(1,31) = 'RHOAnoma',
174 # filename(31) = 'RHOAnoma',
175 # frequency(32) = 2635200.,
176 # fields(1,32) = 'DRHODR ',
177 # filename(32) = 'DRHODR',
178 # frequency(33) = 2635200.,
179 # fields(1,33) = 'TRAC01 ',
180 # filename(33) = 'TRAC01',
181 # frequency(34) = 2635200.,
182 # fields(1,34) = 'TRAC02 ',
183 # filename(34) = 'TRAC02',
184 # frequency(35) = 2635200.,
185 # fields(1,35) = 'TRAC03 ',
186 # filename(35) = 'TRAC03',
187 # frequency(36) = 259200.,
188 # fields(1,36) = 'TRAC04 ',
189 # filename(36) = 'TRAC04',
190 # frequency(37) = 259200.,
191 # fields(1,37) = 'TRAC05 ',
192 # filename(37) = 'TRAC05',
193 # frequency(38) = 259200.,
194 # fields(1,38) = 'TRAC06 ',
195 # filename(38) = 'TRAC06',
196 # frequency(39) = 2635200.,
197 # fields(1,39) = 'LaUa1RHO',
198 # filename(39) = 'LaUa',
199 # frequency(40) = 2635200.,
200 # fields(1,40) = 'LaVa1RHO',
201 # filename(40) = 'LaVa',
202 # frequency(41) = 2635200.,
203 # fields(1,41) = 'LaUH1RHO',
204 # filename(41) = 'LaUH',
205 # frequency(42) = 2635200.,
206 # fields(1,42) = 'LaVH1RHO',
207 # filename(42) = 'LaVH',
208 # frequency(43) = 2635200.,
209 # fields(1,43) = 'LaHw1RHO',
210 # filename(43) = 'LaHw',
211 # frequency(44) = 2635200.,
212 # fields(1,44) = 'LaHs1RHO',
213 # filename(44) = 'LaHs',
214 &
215
216 # Parameter for Diagnostics of per level statistics:
217 #-----------------
218 # for each output-stream:
219 # stat_fname(n) : prefix of the output file name (only 8.c long) for
220 #outp.stream n
221 # stat_freq(n):< 0 : write snap-shot output every |stat_freq| seconds
222 # > 0 : write time-average output every stat_freq seconds
223 # stat_phase(n) : write at time = stat_phase + multiple of |stat_freq|
224 # stat_region(:,n) : list of "regions" (default: 1 region only=global)
225 # stat_fields(:,n) : list of diagnostics fields (8.c) (see
226 #"available_diagnostics.log"
227 # file for the list of all available diag. in this particular
228 #config)
229 #-----------------
230 &DIAG_STATIS_PARMS
231 #- an example just to check the agreement with MONITOR output:
232 #stat_fields(1,1)= 'ETAN ','UVEL ','VVEL ','WVEL ', 'THETA ',
233 # stat_fname(1)= 'dynStDiag',
234 # stat_freq(1)= -864000.,
235 # stat_phase(1)= 0.,
236 &

  ViewVC Help
Powered by ViewVC 1.1.22