cs_36km/input/data.diagnostics

# Diagnostic Package Choices
#-----------------
# for each output-stream:
#  filename(n) : prefix of the output file name (only 8.c long) for outp.stream n
#  frequency(n):< 0 : write snap-shot output every |frequency| seconds
#               > 0 : write time-average output every frequency seconds
#  timePhase(n)     : write at time = timePhase + multiple of |frequency|
#  levels(:,n) : list of levels to write to file (Notes: declared as REAL)
#                 when this entry is missing, select all common levels of this list
#  fields(:,n) : list of diagnostics fields (8.c) (see "available_diagnostics" file
#                 for the list of all available diag. in this particular config)
#-----------------
#
# daily 2-D fields:
# =================
# 
# ETAN     Perturbation of Surface (pressure, height) (Pa,m)
# oceTAUX  zonal surface wind stress, >0 increases uVel (N/m^2)
# oceTAUY  meridional surf. wind stress, >0 increases vVel (N/m^2)
# surForcT model surface forcing for Temperature, >0 increases theta (W/m^2)
# oceQsw   net Short-Wave radiation (+=down), >0 increases theta (W/m^2)
# surForcS model surface forcing for Salinity, >0 increases salinity (g/m^2/s)
# SSS      Sea Surface Salinity (g/kg)
# SST      Sea Surface Temperature (degC,K)
# UVEL_k1  Zonal Component of Velocity at level 1 (m/s)
# VVEL_k1  Meridional Component of Velocity at level 1 (m/s)
# SIarea   SEAICE fractional ice-covered area [0 to 1]
# SIheff   SEAICE effective ice thickness (m)
# SIuice   SEAICE zonal ice velocity, >0 from West to East (m/s)
# SIvice   SEAICE merid. ice velocity, >0 from South to North (m/s)
# SIhsnow  SEAICE snow thickness (m)
# SIhsalt  SEAICE salinity (g/m^2)
# 
# monthly 3-D fields:
# ===================
# 
# SALTanom Salt anomaly (=SALT-35; g/kg)
# THETA    Potential Temperature (degC,K)
# UVELMASS Zonal Mass-Weighted Comp of Velocity (m/s)
# VVELMASS Meridional Mass-Weighted Comp of Velocity (m/s)
# WVELMASS Vertical Mass-Weighted Comp of Velocity (m/s)
#
 &diagnostics_list
  frequency(1)  = 86400.,
   fields(1,1)  = 'ETAN    ',
   filename(1)  = 'ETAN',
  frequency(2)  = 86400.,
   fields(1,2)  = 'oceTAUX ',
   filename(2)  = 'oceTAUX',
  frequency(3)  = 86400.,
   fields(1,3)  = 'oceTAUY ',
   filename(3)  = 'oceTAUY',
  frequency(4)  = 86400.,
   fields(1,4)  = 'surForcT',
   filename(4)  = 'surForcT',
  frequency(5)  = 86400.,
   fields(1,5)  = 'oceQsw  ',
   filename(5)  = 'oceQsw',
  frequency(6)  = 86400.,
   fields(1,6)  = 'surForcS',
   filename(6)  = 'surForcS',
  frequency(7)  = 86400.,
   fields(1,7)  = 'SALT    ',
   levels(1,7)  = 1.,
   filename(7)  = 'SSS',
  frequency(8)  = 86400.,
   fields(1,8)  = 'THETA   ',
   levels(1,8)  = 1.,
   filename(8)  = 'SST',
  frequency(9)  = 86400.,
   fields(1,9)  = 'UVEL    ',
   levels(1,9)  = 1.,
   filename(9)  = 'UVEL_k1',
  frequency(10) = 86400.,
   fields(1,10) = 'VVEL    ',
   levels(1,10) = 1.,
   filename(10) = 'VVEL_k1',
  frequency(11) = 86400.,
   fields(1,11) = 'SIarea  ',
   filename(11) = 'SIarea',
  frequency(12) = 86400.,
   fields(1,12) = 'SIheff  ',
   filename(12) = 'SIheff',
  frequency(13) = 86400.,
   fields(1,13) = 'SIuice  ',
   filename(13) = 'SIuice',
  frequency(14) = 86400.,
   fields(1,14) = 'SIvice  ',
   filename(14) = 'SIvice',
  frequency(15) = 86400.,
   fields(1,15) = 'SIhsnow ',
   filename(15) = 'SIhsnow',
  frequency(16) = 86400.,
   fields(1,16) = 'SIhsalt ',
   filename(16) = 'SIhsalt',
  frequency(17) = 2635200.,
   fields(1,17) = 'SALTanom',
   filename(17) = 'SALTanom',
  frequency(18) = 2635200.,
   fields(1,18) = 'THETA   ',
   filename(18) = 'THETA',
  frequency(19) = 2635200.,
   fields(1,19) = 'UVELMASS',
   filename(19) = 'UVELMASS',
  frequency(20) = 2635200.,
   fields(1,20) = 'VVELMASS',
   filename(20) = 'VVELMASS',
  frequency(21) = 2635200.,
   fields(1,21) = 'WVELMASS',
   filename(21) = 'WVELMASS',
 &

# Parameter for Diagnostics of per level statistics:
#-----------------
# for each output-stream:
#  stat_fname(n) : prefix of the output file name (only 8.c long) for outp.stream n
#  stat_freq(n):< 0 : write snap-shot output every |stat_freq| seconds
#               > 0 : write time-average output every stat_freq seconds
#  stat_phase(n)    : write at time = stat_phase + multiple of |stat_freq|
#  stat_region(:,n) : list of "regions" (default: 1 region only=global)
#  stat_fields(:,n) : list of diagnostics fields (8.c) (see "available_diagnostics.log"
#                 file for the list of all available diag. in this particular config)
#-----------------
 &DIAG_STATIS_PARMS
#- an example just to check the agreement with MONITOR output:
#stat_fields(1,1)= 'ETAN    ','UVEL    ','VVEL    ','WVEL    ', 'THETA   ',
#   stat_fname(1)= 'dynStDiag',
#    stat_freq(1)= -864000.,
#   stat_phase(1)= 0.,
 &
1	dimitri	1.1	# Diagnostic Package Choices
2			#-----------------
3			# for each output-stream:
4			# filename(n) : prefix of the output file name (only 8.c long) for outp.stream n
5			# frequency(n):< 0 : write snap-shot output every \|frequency\| seconds
6			# > 0 : write time-average output every frequency seconds
7			# timePhase(n) : write at time = timePhase + multiple of \|frequency\|
8			# levels(:,n) : list of levels to write to file (Notes: declared as REAL)
9			# when this entry is missing, select all common levels of this list
10			# fields(:,n) : list of diagnostics fields (8.c) (see "available_diagnostics" file
11			# for the list of all available diag. in this particular config)
12			#-----------------
13			#
14	dimitri	1.2	# daily 2-D fields:
15			# =================
16			#
17			# ETAN Perturbation of Surface (pressure, height) (Pa,m)
18			# oceTAUX zonal surface wind stress, >0 increases uVel (N/m^2)
19			# oceTAUY meridional surf. wind stress, >0 increases vVel (N/m^2)
20			# surForcT model surface forcing for Temperature, >0 increases theta (W/m^2)
21			# oceQsw net Short-Wave radiation (+=down), >0 increases theta (W/m^2)
22			# surForcS model surface forcing for Salinity, >0 increases salinity (g/m^2/s)
23			# SSS Sea Surface Salinity (g/kg)
24			# SST Sea Surface Temperature (degC,K)
25			# UVEL_k1 Zonal Component of Velocity at level 1 (m/s)
26			# VVEL_k1 Meridional Component of Velocity at level 1 (m/s)
27			# SIarea SEAICE fractional ice-covered area [0 to 1]
28			# SIheff SEAICE effective ice thickness (m)
29			# SIuice SEAICE zonal ice velocity, >0 from West to East (m/s)
30			# SIvice SEAICE merid. ice velocity, >0 from South to North (m/s)
31			# SIhsnow SEAICE snow thickness (m)
32			# SIhsalt SEAICE salinity (g/m^2)
33			#
34			# monthly 3-D fields:
35			# ===================
36			#
37			# SALTanom Salt anomaly (=SALT-35; g/kg)
38			# THETA Potential Temperature (degC,K)
39			# UVELMASS Zonal Mass-Weighted Comp of Velocity (m/s)
40			# VVELMASS Meridional Mass-Weighted Comp of Velocity (m/s)
41			# WVELMASS Vertical Mass-Weighted Comp of Velocity (m/s)
42	dimitri	1.1	#
43	dimitri	1.2	&diagnostics_list
44			frequency(1) = 86400.,
45			fields(1,1) = 'ETAN ',
46			filename(1) = 'ETAN',
47			frequency(2) = 86400.,
48			fields(1,2) = 'oceTAUX ',
49			filename(2) = 'oceTAUX',
50			frequency(3) = 86400.,
51			fields(1,3) = 'oceTAUY ',
52			filename(3) = 'oceTAUY',
53			frequency(4) = 86400.,
54			fields(1,4) = 'surForcT',
55			filename(4) = 'surForcT',
56			frequency(5) = 86400.,
57			fields(1,5) = 'oceQsw ',
58			filename(5) = 'oceQsw',
59			frequency(6) = 86400.,
60			fields(1,6) = 'surForcS',
61			filename(6) = 'surForcS',
62			frequency(7) = 86400.,
63			fields(1,7) = 'SALT ',
64			levels(1,7) = 1.,
65			filename(7) = 'SSS',
66			frequency(8) = 86400.,
67			fields(1,8) = 'THETA ',
68			levels(1,8) = 1.,
69			filename(8) = 'SST',
70			frequency(9) = 86400.,
71			fields(1,9) = 'UVEL ',
72			levels(1,9) = 1.,
73			filename(9) = 'UVEL_k1',
74			frequency(10) = 86400.,
75			fields(1,10) = 'VVEL ',
76			levels(1,10) = 1.,
77			filename(10) = 'VVEL_k1',
78			frequency(11) = 86400.,
79			fields(1,11) = 'SIarea ',
80			filename(11) = 'SIarea',
81			frequency(12) = 86400.,
82			fields(1,12) = 'SIheff ',
83			filename(12) = 'SIheff',
84			frequency(13) = 86400.,
85			fields(1,13) = 'SIuice ',
86			filename(13) = 'SIuice',
87			frequency(14) = 86400.,
88			fields(1,14) = 'SIvice ',
89			filename(14) = 'SIvice',
90			frequency(15) = 86400.,
91			fields(1,15) = 'SIhsnow ',
92			filename(15) = 'SIhsnow',
93			frequency(16) = 86400.,
94			fields(1,16) = 'SIhsalt ',
95			filename(16) = 'SIhsalt',
96			frequency(17) = 2635200.,
97			fields(1,17) = 'SALTanom',
98			filename(17) = 'SALTanom',
99			frequency(18) = 2635200.,
100			fields(1,18) = 'THETA ',
101			filename(18) = 'THETA',
102			frequency(19) = 2635200.,
103			fields(1,19) = 'UVELMASS',
104			filename(19) = 'UVELMASS',
105			frequency(20) = 2635200.,
106			fields(1,20) = 'VVELMASS',
107			filename(20) = 'VVELMASS',
108			frequency(21) = 2635200.,
109			fields(1,21) = 'WVELMASS',
110			filename(21) = 'WVELMASS',
111	dimitri	1.1	&
112
113			# Parameter for Diagnostics of per level statistics:
114			#-----------------
115			# for each output-stream:
116			# stat_fname(n) : prefix of the output file name (only 8.c long) for outp.stream n
117			# stat_freq(n):< 0 : write snap-shot output every \|stat_freq\| seconds
118			# > 0 : write time-average output every stat_freq seconds
119			# stat_phase(n) : write at time = stat_phase + multiple of \|stat_freq\|
120			# stat_region(:,n) : list of "regions" (default: 1 region only=global)
121			# stat_fields(:,n) : list of diagnostics fields (8.c) (see "available_diagnostics.log"
122			# file for the list of all available diag. in this particular config)
123			#-----------------
124			&DIAG_STATIS_PARMS
125	dimitri	1.2	#- an example just to check the agreement with MONITOR output:
126			#stat_fields(1,1)= 'ETAN ','UVEL ','VVEL ','WVEL ', 'THETA ',
127			# stat_fname(1)= 'dynStDiag',
128			# stat_freq(1)= -864000.,
129			# stat_phase(1)= 0.,
130	dimitri	1.1	&