#!/bin/sh

compare_lines()
{
# use codelet to compare lines
 if [ $verbose -gt 1 ]; then
  cat tmp3.txt 1>&2
 fi
 return `./a.out < tmp3.txt`
}

testoutput_for_prop()
{
# testoutput_for_prop dir s1 label subdir
#
#  compares files in $dir/$subdir/output.txt and $dir/results/output.txt
#  using search strings s1 and text label 
 
 if [ $debug -gt 0 ]; then
  echo testoutput_for_prop: grep "$2" $1/$4/output.txt 1>&2
 fi
 if [ -r $1/$4/output.txt ]; then
  grep "$2" $1/$4/output.txt | sed 's/.*=//' | nl > tmp1.txt
  lncnt=`wc -l tmp1.txt | awk '{print $1}' `
  if [ $lncnt -lt 3 ]; then
   if [ $verbose -gt 0 ]; then
    echo Not enough lines of output when searching for "$2" 1>&2
   fi
   return 99
  fi
 else
  echo testoutput_for_prop: output.txt from model run was not readable 1>&2
  return 99
 fi
 if [ $debug -gt 0 ]; then
  echo testoutput_for_prop: grep "$2" $1/results/output.txt 1>&2
 fi
 grep "$2" $1/results/output.txt | sed 's/.*=//' | nl > tmp2.txt
  lncnt=`wc -l tmp2.txt | awk '{print $1}' `
  if [ $lncnt -lt 3 ]; then
   if [ $verbose -gt 0 ]; then
    echo Not enough lines of output when searching for "$2" 1>&2
   fi
   return 99
  fi
 if [ $debug -gt 0 ]; then
  echo testoutput_for_prop: join tmp1.txt tmp2.txt 1>&2
 fi
 join tmp1.txt tmp2.txt | awk '{print $1 " " $2 " " $3}' > tmp3.txt
 if [ $debug -gt 0 ]; then
  echo testoutput_for_prop: compare_lines 1>&2
 fi
 compare_lines
 digits_of_similarity=$?
 if [ $digits_of_similarity -eq 99 ]; then
  if [ $verbose -gt 0 ]; then
   echo testoutput_for_prop: No comparison was available for \"$2\" 1>&2
  fi
  digits_of_similarity=99
 else
  if [ $verbose -gt 0 ]; then
   echo There were $digits_of_similarity decimal places of similarity for \"$2\" 1>&2
  fi
 fi
 rm tmp1.txt tmp2.txt tmp3.txt

 return $digits_of_similarity
}

dashnum()
{
# dashnum n1 n2 n3 ...
#
#  print numbers using %3i format or "--" if number = 99
for num in $@
do
 if [ $num = 99 ]; then
  printf ' --'
 else
  printf '%3i' $num
 fi
done
}

testoutput()
{
# testoutput diretory subdir
#
#  test output in "directory"

if [ $debug -gt 0 ]; then
 echo testoutput: testoutput_for_prop $1 cg2d_init_res 1>&2
fi
testoutput_for_prop $1 "cg2d_init_res" "cg2d init. residual" $2; cg2dres=$?
if [ $debug -gt 0 ]; then
 echo testoutput: cg2dres=$cg2dres 1>&2
fi

if [ $longtest -gt 0 ]; then
testoutput_for_prop $1 "dynstat_theta_min" "theta minimum" $2; tmin=$?
testoutput_for_prop $1 "dynstat_theta_max" "theta maximum" $2; tmax=$?
testoutput_for_prop $1 "dynstat_theta_mean" "theta mean" $2; tmean=$?
testoutput_for_prop $1 "dynstat_theta_sd" "theta s.d." $2; tsd=$?
testoutput_for_prop $1 "dynstat_salt_min" "salt minimum" $2; smin=$?
testoutput_for_prop $1 "dynstat_salt_max" "salt maximum" $2; smax=$?
testoutput_for_prop $1 "dynstat_salt_mean" "salt mean" $2; smean=$?
testoutput_for_prop $1 "dynstat_salt_sd" "salt s.d." $2; ssd=$?
testoutput_for_prop $1 "dynstat_uvel_min" "U minimum" $2; umin=$?
testoutput_for_prop $1 "dynstat_uvel_max" "U maximum" $2; umax=$?
testoutput_for_prop $1 "dynstat_uvel_mean" "U mean" $2; umean=$?
testoutput_for_prop $1 "dynstat_uvel_sd" "U s.d." $2; usd=$?
testoutput_for_prop $1 "dynstat_vvel_min" "V minimum" $2; vmin=$?
testoutput_for_prop $1 "dynstat_vvel_max" "V maximum" $2; vmax=$?
testoutput_for_prop $1 "dynstat_vvel_mean" "V mean" $2; vmean=$?
testoutput_for_prop $1 "dynstat_vvel_sd" "V s.d." $2; vsd=$?
else
testoutput_for_prop $1 "dynstat_theta_min" "theta minimum" $2; tmin=$?
testoutput_for_prop $1 "dynstat_theta_max" "theta maximum" $2; tmax=$?
testoutput_for_prop $1 "dynstat_salt_min" "salt minimum" $2; smin=$?
testoutput_for_prop $1 "dynstat_salt_max" "salt maximum" $2; smax=$?
testoutput_for_prop $1 "dynstat_uvel_min" "U minimum" $2; umin=$?
testoutput_for_prop $1 "dynstat_uvel_max" "U maximum" $2; umax=$?
testoutput_for_prop $1 "dynstat_vvel_min" "V minimum" $2; vmin=$?
testoutput_for_prop $1 "dynstat_vvel_max" "V maximum" $2; vmax=$?
fi

dashnum $cg2dres $tmin $tmax $tmean $tsd $smin $smax $smean $ssd \
        $umin $umax $umean $usd $vmin $vmax $vmean $vsd
#printf '%3i' $cg2dres $tmin $tmax $tmean $tsd $smin $smax $smean $ssd \
#       $umin $umax $umean $usd $vmin $vmax $vmean $vsd
}

genmakemodel()
{
# genmakemodel directory
 ( cd $1;
   if [ $quick -eq 0 -o ! -r Makefile ]; then
    printf 'genmake ... ' 1>&2
    if [ $ieee -eq 0 ]; then
     ../../../tools/genmake -mods=../code > make.log 2>&1
    else
     ../../../tools/genmake -ieee -mods=../code > make.log 2>&1
    fi
    if [ $? -ne 0 ]; then
     tail make.log
     echo genmakemodel: genmake failed 1>&2
     return 1
    else
      echo succesful 1>&2
    fi
   fi
 )
}

makecleancompile()
{
# makecleancompile directory
 ( cd $1;
   if [ $force -gt 0 ]; then
    rm -f output.txt
    printf 'make clean ... ' 2>&1
    make CLEAN >> make.log 2>&1
    if [ $? -ne 0 ]; then
      tail make.log
      echo makecleancompile: make clean failed 1>&2
      return 1
    else
      echo succesful 1>&2
    fi
   fi
 )
}

makecleanupafter()
{
# makeupafter directory
 ( cd $1;
   if [ $clean -gt 0 ]; then
    rm -f output.txt
    printf 'make clean ... ' 2>&1
    make CLEAN >> make.log 2>&1
    if [ $? -ne 0 ]; then
      tail make.log
      echo makeupafter: make clean failed 1>&2
      return 1
    else
      echo succesful 1>&2
    fi
   fi
 )
}

makedependmodel()
{
# makedependmodel directory
 ( cd $1;
   if [ $quick -eq 0 -o ! -r Makefile ]; then
    printf 'make depend ... ' 1>&2
    make cleanlinks >> make.log 2>&1
    make depend >> make.log 2>&1
    if [ $? -ne 0 ]; then
      tail make.log
      echo makemodel: make depend failed 1>&2
      return 1
    else
      echo succesful 1>&2
    fi
   fi
 )
}

makemodel()
{
# makemodel directory
 ( cd $1;
   if [ -r Makefile ]; then
    printf 'make ... ' 1>&2
    make >> make.log 2>&1
    if [ $? -ne 0 ]; then
     tail make.log
     echo failed 1>&2
     return 1
    else
     echo succesful 1>&2
    fi
   fi
 )
}

linkdata()
{
# linkdata flag 
# symbolically link data files to run directory
 if [ $1 -ne 0 ]; then
# if [ ! -r $2 ]; then
#  mkdir $2
# fi
  ( cd $2; ln -sf ../input/* .)
 fi
}

runmodel()
{
# runmodel directory exe
#
#  runs the model "exe" in "directory" (exe is relative to directory)

 ( cd $1
   if [ -x $2 ]; then
    if [ $quick -eq 0 ]; then
     rm -f output.txt
    fi
    printf 'runmodel: ' 1>&2
     make output.txt && return 0
     return 1
   fi
 )
}

createcodelet()
{
# create codelet for comparing model output
cat > tmp_cmpnum.f <<EOFA
      program cmpnum
      implicit none
      real*8 a,b,diff
      integer linnum,best
      best=-16
  99  read(*,*,end=70,err=60) linnum,a,b
      diff=0.5*(abs(a)+abs(b))
c     print *,a,b,diff,abs(a-b)/diff
      if (diff.gt.1.e-12) then
        diff=abs(a-b)/diff
        if (diff.gt.0.) then
c         print *,int(log10(diff)),diff
          linnum=int(log10(diff))
          best=max(best,linnum)
        endif
      else
        if (best.eq.-16.and.diff.ne.0.) best=-22
      endif
      goto 99
  60  stop 'cmpnum: An error occured reading a,b'
  70  print *,-best
      end
EOFA
f77 tmp_cmpnum.f
if [ -x ./a.out ]; then
 return 0
else
 echo createcodelet: failed to compile codelet 1>&2
 exit 1
fi
}

formatresults()
{
# formatresults expt genmake depend make run results*

 nm=$1
 printf '%s %s %s %s' $2 $3 $4 $5
 shift; shift; shift; shift; shift;
 printf '%3s' $@

 if [ $1 = '--' ]; then
  printf ' N/O '
 else
  if [ $1 -gt 12 ]; then
   printf ' pass'
  else
   printf ' FAIL'
  fi
 fi
 printf '  %s' $nm
 printf '\n'

}

show_help()
{
cat - << EOF
$0 [-help] [-quick] [-verbose] dir1 [dir2] [...]
 -help      Show this help message
 -quick     Skip "genmake" and "make depend" if the Makefile exists
 -quiet     Reduce the amount of output
 -verbose   Produce copious amounts of output
 -debug     Produce even more output which will mean nothing to most
 -force     Do "make CLEAN" before compiling. This forces a complete rebuild.
 -clean     Do "make CLEAN" after compiling and testing.
 -shorttest Don't compare numeric output for mean and s.d. of variables.
 -noieee    By default, $0 uses the -ieee option for genmake. This turns it off.
 -cleanup   Aggresively removes all model output, executables and object files
            and then exits. Use with care.

Normal usage:
 $0 *       Configure, compile, run and analyze in all experiment directories
EOF
}

scandirs()
{
if [ $# -eq 0 ]; then
 for arg in *
  do
   test -d $arg/input && echo $arg
 done
else
 echo $*
fi
}

clean_up()
{
# Find all executables, object files, CPP'd source and model output
# and DELETE it.
for opt in '-name "mitgcmuv*"' '-name "*.o"' '-name "*.f"' '-name "*.c"' '-name "fort.*"' '-name "make.log"' '-path *results -prune -o -name "*.meta"' '-path *results -prune -o -name "*.data"' '-type l'
 do
   echo Cleaning: find . $opt -exec rm {} \;
   find . $opt -exec rm {} \;
done
}

###############################################################################
###############################################################################
###############################################################################

# Main function

# Default properties
debug=0
verbose=1
quick=0
force=0
clean=0
ieee=1
longtest=1
expts=''

# Process arguments
for arg in $@
do
 case $arg in
   -cleanup) clean_up; exit 0;;
   -quick) quick=1;;
   -verbose) verbose=2;;
   -debug) debug=1;;
   -force) force=1;;
   -clean) clean=1;;
   -noieee) ieee=0;;
   -shorttest) longtest=0;;
   -quiet) verbose=0;;
   -help) show_help; exit 0;;
   -*) echo Unrecognized option:$arg; exit 9;;
   *) test -d $arg && expts=`echo $expts $arg`;;
 esac
done

if [ $force -gt 0 -a $quick -gt 0 ]; then
 echo You specified -quick and -force together which conflict.
 echo Please specify either -quick or -force or neither but not both.
 exit 1
fi

#if [ ${#expts} -eq 0 ]; then
# echo Scanning all directories
# for arg in *
#  do
#   test -d $arg && expts=`echo $expts $arg`
# done
#fi
expts=`scandirs $expts`

createcodelet

if [ $longtest -gt 0 ]; then
cat << EOF > summary.txt
                T           S           U           V
C D M    c        m  s        m  s        m  s        m  s
n p a R  g  m  m  e  .  m  m  e  .  m  m  e  .  m  m  e  .
f n k u  2  i  a  a  d  i  a  a  d  i  a  a  d  i  a  a  d
g d e n  d  n  x  n  .  n  x  n  .  n  x  n  .  n  x  n  .

EOF
else
cat << EOF > summary.txt
              T     S     U     V
C D M    c                        
n p a R  g  m  m  m  m  m  m  m  m
f n k u  2  i  a  i  a  i  a  i  a
g d e n  d  n  x  n  x  n  x  n  x

EOF
fi

# Now configue, make, run and test in each directory
for dir in $expts
do
 if [ -r $dir/results/output.txt ]; then
 echo -------------------------------------------------------------------------------
 echo
 echo Experiment: $dir
 echo
 unset genmake makedepend make run
 if [ $longtest -gt 0 ]; then
  results='-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --'
 else
  results='-- -- -- -- -- -- -- -- --'
 fi
 if [ -r $dir/build ]; then
  seperatebuilddir=1
  builddir=build
  rundir=build
  (cd $dir/input; rm -f *.{o,f,c,F} work* output.txt Make* make.log; )
  (cd $dir/build; ln -sf ../input/* .)
 else
  seperatebuilddir=0
  builddir=input
  rundir=input
 fi
 genmakemodel $dir/$builddir && genmake=Y \
 && makecleancompile $dir/$builddir \
 && makedependmodel $dir/$builddir && makedepend=Y \
 && makemodel $dir/$builddir && make=Y \
 && linkdata $seperatebuilddir $dir/$rundir \
 && runmodel $dir/$builddir mitgcmuv && run=Y \
 && results=`testoutput $dir $rundir` \
 && makecleanupafter $dir/$builddir
 echo
 formatresults $dir ${genmake:-N} ${makedepend:-N} ${make:-N} ${run:-N} $results
 echo
 formatresults $dir ${genmake:-N} ${makedepend:-N} ${make:-N} ${run:-N} $results >> summary.txt
 fi
done

rm tmp_cmpnum.f a.out

echo -------------------------------------------------------------------------------
echo 
cat summary.txt