1 |
# Diagnostic Package Choices |
2 |
#-------------------- |
3 |
# dumpAtLast (logical): always write output at the end of simulation (default=F) |
4 |
# diag_mnc (logical): write to NetCDF files (default=useMNC) |
5 |
#--for each output-stream: |
6 |
# fileName(n) : prefix of the output file name (max 80c long) for outp.stream n |
7 |
# frequency(n):< 0 : write snap-shot output every |frequency| seconds |
8 |
# > 0 : write time-average output every frequency seconds |
9 |
# timePhase(n) : write at time = timePhase + multiple of |frequency| |
10 |
# averagingFreq : frequency (in s) for periodic averaging interval |
11 |
# averagingPhase : phase (in s) for periodic averaging interval |
12 |
# repeatCycle : number of averaging intervals in 1 cycle |
13 |
# levels(:,n) : list of levels to write to file (Notes: declared as REAL) |
14 |
# when this entry is missing, select all common levels of this list |
15 |
# fields(:,n) : list of selected diagnostics fields (8.c) in outp.stream n |
16 |
# (see "available_diagnostics.log" file for the full list of diags) |
17 |
# missing_value(n) : missing value for real-type fields in output file "n" |
18 |
# fileFlags(n) : specific code (8c string) for output file "n" |
19 |
#-------------------- |
20 |
&DIAGNOSTICS_LIST |
21 |
fields(1:2,1) = 'TCANOPY ','RSURF ', |
22 |
levels(1,1) = 1., |
23 |
fileName(1) = 'surface', |
24 |
frequency(1) = 0.003, |
25 |
& |
26 |
|
27 |
#-------------------- |
28 |
# Parameter for Diagnostics of per level statistics: |
29 |
#-------------------- |
30 |
# diagSt_mnc (logical): write stat-diags to NetCDF files (default=diag_mnc) |
31 |
# diagSt_regMaskFile : file containing the region-mask to read-in |
32 |
# nSetRegMskFile : number of region-mask sets within the region-mask file |
33 |
# set_regMask(i) : region-mask set-index that identifies the region "i" |
34 |
# val_regMask(i) : region "i" identifier value in the region mask |
35 |
#--for each output-stream: |
36 |
# stat_fName(n) : prefix of the output file name (max 80c long) for outp.stream n |
37 |
# stat_freq(n):< 0 : write snap-shot output every |stat_freq| seconds |
38 |
# > 0 : write time-average output every stat_freq seconds |
39 |
# stat_phase(n) : write at time = stat_phase + multiple of |stat_freq| |
40 |
# stat_region(:,n) : list of "regions" (default: 1 region only=global) |
41 |
# stat_fields(:,n) : list of selected diagnostics fields (8.c) in outp.stream n |
42 |
# (see "available_diagnostics.log" file for the full list of diags) |
43 |
#-------------------- |
44 |
&DIAG_STATIS_PARMS |
45 |
stat_fields(1:20,1) = 'UVEL ','VVEL ','WVEL ','THETA ', |
46 |
'UAVE ','VAVE ','TAVE ','TURBU ', |
47 |
'GWDU ','GWDV ','RFU ','RFV ', |
48 |
'DIABU ','DIABUDYN','DIABV ','DIABVDYN', |
49 |
'TENDUFIZ','TENDVFIZ','CORRDU ','CORRDV ', |
50 |
# stat_fName(1) = 'dynStDiag', |
51 |
stat_freq(1) = 0.0002, |
52 |
stat_phase(1) = 0., |
53 |
& |
54 |
#- ignore the following since are out of namelist |
55 |
frequency(1) = 100.0, |
56 |
levels(1,1) = 1., |
57 |
fields(1,1) = 'TCANOPY ','OLR ','PREACC ','CLDFRC ','OSR ','RADSWT ', |
58 |
'LWGUP ','RADLWG ','LWGCLR ','OSRCLR ','OLRCLR ','RADSWG ', |
59 |
'SWGCLR ','LWGDOWN ','PBL ','EFLUX ','HFLUX ','TPW ', |
60 |
'TGROUND ','TDEEP ','SMSHAL ','SNOW ','RAINLSP ','RAINCON ', |
61 |
'ALBNIRDF','ALBNIRDR','PSUBCLD ','RSURF ', |
62 |
'QCANOPY ','SMROOT ','SMDEEP ','CAPACITY','PRECON ','EVAP ', |
63 |
'GWDUS ','GWDVS ','GWDUT ','GWDVT ','PS ', |
64 |
'CLDLOW ','CLDMID ','CLDHI ','TAULOW ','TAUMID ','TAUHI ', |
65 |
'SLP ','WINDS ','CT ','CU ','UFLUX ','VFLUX ', |
66 |
'USTAR ','Z0 ','U2M ','V2M ','T2M ','Q2M ', |
67 |
'U10M ','V10M ','T10M ','Q10M ','SNOWFALL','RUNOFF ', |
68 |
'ALBEDO ','ALBVISDF','ALBVISDR','PLALBEDO', |
69 |
fileName(1) = 'surface', |
70 |
frequency(2) = 100.0, |
71 |
fileFlags(2) = ' P1 ', |
72 |
levels(1,2) = 100000.0, 97500.0, 95000.0, 92500.0, 90000.0, 85000.0, 80000.0, |
73 |
70000.0, 60000.0, 50000.0, 40000.0, 30000.0, 25000.0, 20000.0, |
74 |
15000.0, 10000.0, 7000.0, 5000.0, 3000.0, 2000.0, |
75 |
fields(1,2) = 'TURBT ','TURBQ ','MOISTT ','MOISTQ ','TURBU ','TURBV ', |
76 |
'RADLW ','RADSW ','GWDU ','GWDV ','GWDT ','CLDLSP ', |
77 |
'CLDRAS ','CLDTOT ','CLDNP ','TAUCLD ','CLDMAS ','FIZPRES ', |
78 |
'MOISTU ','MOISTV ','KM ','KH ','RFT ','TKE ', |
79 |
'RFU ','RFV ','DTRAIN ','QFILL ','TRBFCC ','DIABU ', |
80 |
'DIABV ','DIABT ','DIABQ ','TENDUFIZ','TENDVFIZ','TENDTFIZ', |
81 |
'TENDQFIZ','CORRDU ','CORRDV ','CORRDT ','CORRDQ ', |
82 |
fileName(2) = 'upperfiz', |
83 |
frequency(3) = 100.0, |
84 |
fields(1,3) = 'UVEL ', |
85 |
fileName(3) = 'uVeltave', |
86 |
frequency(4) = 100.0, |
87 |
fields(1,4) = 'VVEL ', |
88 |
fileName(4) = 'vVeltave', |
89 |
frequency(5) = 100.0, |
90 |
fields(1,5) = 'THETA ', |
91 |
fileName(5) = 'Ttave', |
92 |
frequency(6) = 100.0, |
93 |
fields(1,6) = 'SALT ', |
94 |
fileName(6) = 'Stave', |
95 |
frequency(7) = 100.0, |
96 |
fields(1,7) = 'PHIHYD ', |
97 |
fileName(7) = 'phitave', |
98 |
frequency(8) = 100.0, |
99 |
fields(1,8) = 'DIABTDYN','DIABQDYN','DIABUDYN','DIABVDYN','RCENTER ','RELHUM ', |
100 |
'SALTFILL','TOTUTEND','TOTVTEND','TOTTTEND','TOTSTEND', |
101 |
fileName(8) = 'tendsdyn', |
102 |
frequency(9) = 100.0, |
103 |
fields(1,9) = 'UVELSQ ','VVELSQ ','THETASQ ','WVELSQ ','PHIHYDSQ','SALTSQ ', |
104 |
'UV_VEL_C','WU_VEL ','WV_VEL ','UTHMASS ','VTHMASS ','WTHMASS ', |
105 |
'USLTMASS','VSLTMASS','WSLTMASS', |
106 |
fileName(9) = 'secmoms', |