/[MITgcm]/MITgcm/verification/aim.5l_cs/input.thSI/data.diagnostics
ViewVC logotype

Diff of /MITgcm/verification/aim.5l_cs/input.thSI/data.diagnostics

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph | View Patch Patch

revision 1.12 by jmc, Tue Feb 21 01:52:15 2006 UTC revision 1.13 by jmc, Sun Dec 19 00:37:14 2010 UTC
# Line 1  Line 1 
1  # Diagnostic Package Choices  # Diagnostic Package Choices
2  #-----------------  #--------------------
3  # for each output-stream:  #  dumpAtLast (logical): always write output at the end of simulation (default=F)
4  #  filename(n) : prefix of the output file name (only 8.c long) for outp.stream n  #  diag_mnc   (logical): write to NetCDF files (default=useMNC)
5    #--for each output-stream:
6    #  fileName(n) : prefix of the output file name (max 80c long) for outp.stream n
7  #  frequency(n):< 0 : write snap-shot output every |frequency| seconds  #  frequency(n):< 0 : write snap-shot output every |frequency| seconds
8  #               > 0 : write time-average output every frequency seconds  #               > 0 : write time-average output every frequency seconds
9  #  timePhase(n)     : write at time = timePhase + multiple of |frequency|  #  timePhase(n)     : write at time = timePhase + multiple of |frequency|
10    #    averagingFreq  : frequency (in s) for periodic averaging interval
11    #    averagingPhase : phase     (in s) for periodic averaging interval
12    #    repeatCycle    : number of averaging intervals in 1 cycle
13  #  levels(:,n) : list of levels to write to file (Notes: declared as REAL)  #  levels(:,n) : list of levels to write to file (Notes: declared as REAL)
14  #                 when this entry is missing, select all common levels of this list  #                when this entry is missing, select all common levels of this list
15  #  fields(:,n) : list of diagnostics fields (8.c) (see "available_diagnostics" file  #  fields(:,n) : list of selected diagnostics fields (8.c) in outp.stream n
16  #                 for the list of all available diag. in this particular config)  #                (see "available_diagnostics.log" file for the full list of diags)
17  #-----------------  #  missing_value(n) : missing value for real-type fields in output file "n"
18   &diagnostics_list  #  fileFlags(n)     : specific code (8c string) for output file "n"
19    frequency(1) = 4500.,  #--------------------
20     &DIAGNOSTICS_LIST
21      fields(1:3,1)  = 'ETAN    ','ETANSQ  ','DETADT2 ',
22     levels(1,1) = 1.,     levels(1,1) = 1.,
23     fields(1,1) = 'ETAN    ','ETANSQ  ','DETADT2 ',     fileName(1) = 'surfDiag',
24     filename(1) = 'surfDiag',    frequency(1) = 4500.,
25      fields(1:20,2) = 'UVEL    ','VVEL    ','WVEL    ','THETA   ','SALT    ',
26                       'UVELSQ  ','VVELSQ  ','WVELSQ  ','THETASQ ',
27                       'UV_VEL_Z','PHIHYD  ','PHIHYDSQ',
28                       'UVELMASS','VVELMASS',
29                       'UTHMASS ','VTHMASS ','WVELTH  ',
30                       'USLTMASS','VSLTMASS','WVELSLT ',
31       levels(1:5,2) = 1.,2.,3.,4.,5.,
32       fileName(2) = 'dynDiag',
33    frequency(2) = 4500.,    frequency(2) = 4500.,
34     levels(1,2) = 1.,2.,3.,4.,5.,    fields(1:20,3) = 'UFLUX   ','VFLUX   ',
35     fields(1,2) = 'UVEL    ','VVEL    ','WVEL    ','THETA   ','SALT    ',                     'TSR     ','OLR     ','RADSWG  ','RADLWG  ',
36                   'UVELSQ  ','VVELSQ  ','WVELSQ  ','THETASQ ',                     'HFLUX   ','EVAP    ','PRECON  ','PRECLS  ',
37                   'UV_VEL_Z','PHIHYD  ','PHIHYDSQ',                     'CLDFRC  ','CLDPRS  ','CLDMAS  ',
38                   'UVELMASS','VVELMASS',                     'DRAG    ','WINDS   ','TS      ','QS      ',
39                   'UTHMASS ','VTHMASS ','WVELTH  ',                     'ENPREC  ','ALBVISDF','DTSIMPL ',
40                   'USLTMASS','VSLTMASS','WVELSLT ',  #                  'DWNLWG  ',
41     filename(2) = 'dynDiag',  #                  'TSRCLR  ','OLRCLR  ','SWGCLR  ','LWGCLR  ',
42       fileName(3) = 'aimDiag',
43    frequency(3) = 4500.,    frequency(3) = 4500.,
44     levels(1,3) = 1.,    fields(1:9,4) =  'RELHUM  ','DIABT   ','DIABQ   ',
45     fields(1,3) = 'UFLUX   ', 'VFLUX   ',                     'RADSW   ','RADLW   ','DTCONV  ','DTLS    ',
46                   'TSR     ', 'OLR     ', 'RADSWG  ', 'RADLWG  ',                     'DQCONV  ','DQLS    ',
47                   'HFLUX   ', 'EVAP    ', 'PRECON  ', 'PRECLS  ',  #                  'SWCLR   ', 'LWCLR   ',
48                   'CLDFRC  ', 'CLDPRS  ', 'CLDMAS  ',     fileName(4) = 'aimDDT',
                  'DRAG    ', 'WINDS   ', 'TS      ', 'QS      ',  
                  'ENPREC  ', 'ALBVISDF', 'DTSIMPL ',  
 #                'DWNLWG  ',  
 #                'TSRCLR  ', 'OLRCLR  ', 'SWGCLR  ', 'LWGCLR  ',  
    filename(3) = 'aimDiag',  
49    frequency(4) = 4500.,    frequency(4) = 4500.,
50     levels(1,4) = 1.,2.,3.,4.,5.,    fields(1:14,5) = 'SI_Fract','SI_Thick','SI_SnowH',
51     fields(1,4) = 'RELHUM  ', 'DIABT   ', 'DIABQ   ',                     'SI_Tsrf ','SI_Tice1','SI_Tice2',
52                   'RADSW   ', 'RADLW   ', 'DTCONV  ', 'DTLS    ',                     'SI_Qice1','SI_Qice2','SIsnwAge',
53                   'DQCONV  ', 'DQLS    ',                     'SIsnwPrc','SIalbedo',
54  #                'SWCLR   ', 'LWCLR   ',                     'SIflx2oc','SIfrw2oc','SIsaltFx',
55     filename(4) = 'aimDDT',  #                  'SIflxAtm','SIfrwAtm',
56    #                  'SItOcMxL','SIsOcMxL',
57       fileName(5) = 'thSIceDiag',
58    frequency(5) = 4500.,    frequency(5) = 4500.,
    fields(1,5) = 'SI_Fract', 'SI_Thick', 'SI_SnowH',  
                  'SI_Tsrf ', 'SI_Tice1', 'SI_Tice2',  
                  'SI_Qice1', 'SI_Qice2', 'SIsnwAge',  
                  'SIsnwPrc', 'SIalbedo',  
                  'SIflx2oc', 'SIfrw2oc', 'SIsaltFx',  
 #                'SIflxAtm', 'SIfrwAtm',  
 #                'SItOcMxL', 'SIsOcMxL',  
    filename(5) = 'thSIceDiag',  
59   &   &
60    
61    #--------------------
62  # Parameter for Diagnostics of per level statistics:  # Parameter for Diagnostics of per level statistics:
63  #-----------------  #--------------------
64  # for each output-stream:  #  diagSt_mnc (logical): write stat-diags to NetCDF files (default=diag_mnc)
65  #  stat_fname(n) : prefix of the output file name (only 8.c long) for outp.stream n  #  diagSt_regMaskFile : file containing the region-mask to read-in
66    #  nSetRegMskFile   : number of region-mask sets within the region-mask file
67    #  set_regMask(i)   : region-mask set-index that identifies the region "i"
68    #  val_regMask(i)   : region "i" identifier value in the region mask
69    #--for each output-stream:
70    #  stat_fName(n) : prefix of the output file name (max 80c long) for outp.stream n
71  #  stat_freq(n):< 0 : write snap-shot output every |stat_freq| seconds  #  stat_freq(n):< 0 : write snap-shot output every |stat_freq| seconds
72  #               > 0 : write time-average output every stat_freq seconds  #               > 0 : write time-average output every stat_freq seconds
73  #  stat_phase(n)    : write at time = stat_phase + multiple of |stat_freq|  #  stat_phase(n)    : write at time = stat_phase + multiple of |stat_freq|
74  #  stat_region(:,n) : list of "regions" (default: 1 region only=global)  #  stat_region(:,n) : list of "regions" (default: 1 region only=global)
75  #  stat_fields(:,n) : list of diagnostics fields (8.c) (see "available_diagnostics.log"  #  stat_fields(:,n) : list of selected diagnostics fields (8.c) in outp.stream n
76  #                 file for the list of all available diag. in this particular config)  #                (see "available_diagnostics.log" file for the full list of diags)
77  #-----------------  #--------------------
78   &DIAG_STATIS_PARMS   &DIAG_STATIS_PARMS
79  #- regional mask: 3 lat. band: 1 : y <= -24 ; 2 : -24<y<24 ; 3 : 24 <= y  #- regional mask: 3 lat. band: 1 : y <= -24 ; 2 : -24<y<24 ; 3 : 24 <= y
80   diagSt_regMaskFile='regMask_lat24.bin',   diagSt_regMaskFile='regMask_lat24.bin',
81   nSetRegMskFile=1,   nSetRegMskFile = 1,
82   set_regMask(1)= 1,  1,  1,   set_regMask(1:3) = 1,  1,  1,
83   val_regMask(1)= 1., 2., 3.,   val_regMask(1:3) = 1., 2., 3.,
84  #- an example just to check the agreement with MONITOR output:  #- an example just to check the agreement with MONITOR output:
85   stat_fields(1,1)= 'ETAN    ','UVEL    ','VVEL    ','WVEL    ', 'THETA   ',   stat_fields(1:5,1)  = 'ETAN    ','UVEL    ','VVEL    ','WVEL    ', 'THETA   ',
86      stat_fname(1)= 'dynStDiag',    stat_fName(1) = 'dynStDiag',
87       stat_freq(1)= -3600.,     stat_freq(1) = -3600.,
88      stat_phase(1)= 0.,    stat_phase(1) = 0.,
89   stat_fields(1,4)= 'LdSnowH ', 'GrdSurfT', 'GrdTemp ', 'GrdWater',   stat_fields(1:4,4)  = 'LdSnowH ', 'GrdSurfT', 'GrdTemp ', 'GrdWater',
90   stat_region(1,4)= 1, 2, 3,    stat_fName(4) = 'landStDiag',
91      stat_fname(4)= 'landStDiag',     stat_freq(4) = -3600.,
92       stat_freq(4)= -3600.,    stat_phase(4) = 0.,
93      stat_phase(4)= 0.,   stat_fields(1:12,5) = 'SI_Fract', 'SI_Thick', 'SI_SnowH',
  stat_fields(1,5)= 'SI_Fract', 'SI_Thick', 'SI_SnowH',  
94                     'SI_Tsrf ', 'SI_Tice1', 'SI_Tice2',                     'SI_Tsrf ', 'SI_Tice1', 'SI_Tice2',
95  #                  'SI_Qice1', 'SI_Qice2',  #                  'SI_Qice1', 'SI_Qice2',
96                     'SIsnwPrc', 'SIalbedo', 'SIsnwAge',                     'SIsnwPrc', 'SIalbedo', 'SIsnwAge',
97                     'SIflx2oc', 'SIfrw2oc', 'SIsaltFx',                     'SIflx2oc', 'SIfrw2oc', 'SIsaltFx',
98   stat_region(1,5)= 1, 3, 0,    stat_region(1:3,5) = 1, 3, 0,
99      stat_fname(5)= 'thSIceStDiag',    stat_fName(5) = 'thSIceStDiag',
100       stat_freq(5)= -3600.,     stat_freq(5) = -3600.,
101      stat_phase(5)= 0.,    stat_phase(5) = 0.,
102   &   &
103    

Legend:
Removed from v.1.12  
changed lines
  Added in v.1.13

  ViewVC Help
Powered by ViewVC 1.1.22