Contents of /MITgcm/tools/genmake

#!/bin/csh -f
#
# $Header: /u/gcmpack/models/MITgcmUV/tools/genmake,v 1.61 2002/02/15 21:26:37 heimbach Exp $
# $Name:  $
#
# Makefile generator for MITgcm UV codes
#   created  by cnh 03/98
#   adapted  by aja 06/98
#   modified by aja 01/00

# Default lists
set DISABLE = ( aim autodiff cal cost ctrl ecco exf grdchk flt ptracers )
set DEFINES = ( )
set ENABLE  = ( )
set MODS  = ( )

# Grab variables/lists from .genmakerc
if (-r .genmakerc) source .genmakerc

# Process command-line arguments
set allargs=( $argv )
while ($#allargs)
 set arg = $allargs[1]
 switch ($arg)
 case -makefile:
   set mfile = ( Makefile )
   breaksw
 case -makefile=*:
   set mfile = ( `echo $arg | sed 's/-makefile=//' `)
   breaksw
 case -platform:
 case -platform=:
   echo "To change platform you must specify one with -platform="
   echo "eg. -platform=sparc  or  -platform=mips"
   exit
   breaksw
 case -platform*:
   if ($?platform) then
    echo Option -platform=dir can only be specified once.; exit 1
   endif
   set platform = ( `echo $arg | sed 's/-platform=//' `)
   breaksw
 case -rootdir:
 case -rootdir=:
   echo "To specify root directory you must specify one with -rootdir=dir"
   echo "with NO space eg. -rootdir=../../..  or  -rootdir=/usr/people/joe/src"
   exit
   breaksw
 case -rootdir=*:
   if ($?ROOTDIR) then
    echo "***" Warning: variable \$ROOTDIR is already set to $ROOTDIR
    echo "***" Command line \"$arg\" will override this.
   endif
   set ROOTDIR = ( `echo $arg | sed 's/-rootdir=//' `)
   breaksw
 case -mods:
 case -mods=:
   echo "To specify an additional source directory you must specify one with -mods=dir"
   echo "with NO space eg. -mods=../code  or  -mods=/usr/people/joe/src"
   exit
   breaksw
 case -mods=*:
   set MODS = ( $MODS `echo $arg | sed 's/-mods=//' | sed 's/,/ /g' `)
   breaksw
 case -disable:
 case -disable=:
   echo "To disable packages from compilation use -disable=pkg1,pkg2"
   echo "with NO spaces eg. -disable=kpp,gmredi or -disable=all (to enable all packages)"
   exit
   breaksw
 case -disable=*:
   set DISABLE = ( $DISABLE `echo $arg | sed 's/-disable=//' | sed 's/,/ /g' `)
   breaksw
 case -enable:
 case -enable=:
   echo "To enable packages from compilation use -enable=pkg1,pkg2"
   echo "with NO spaces eg. -enable=aim or -enable=all (to enable all packages)"
   echo "-enable overrides -disable, ie. a package listed in both is enabled"
   exit
   breaksw
 case -ieee:
   set IEEE
   breaksw
 case -enable=*:
   set ENABLE = ( $ENABLE `echo $arg | sed 's/-enable=//' | sed 's/,/ /g' `)
   breaksw
 case -mpi:
   echo "Enabling MPI options"
   set USEMPI
   breaksw
 case -jam:
   set include_jam_libs
   echo "Including paths to JAM libraries"
   breaksw
 case -help:
   echo "usage: $0 [-help] [-makefile[=...]] [-platform=...] [-mpi] [-jam] [-disable=pkg1[,pkg2,...]] [-enable=pkg1[,pkg2,...]] [-mods=dir1[,dir2,...]] [-rootdir=dir]"
cat << EOF

$0 is used to generate the Makefile in the current directory.

Typical invocations are:
 o from "bin":   ../tools/genmake
 o from "verification/expt/code": ../../../tools/genmake
 o from "verification/expt/input": ../../../tools/genmake -mods=../code
 o from a scratch directory: ~/mitgcm/tools/genmake -rootdir=~/mitgcm
   or  ~/mitgcm/tools/genmake -rootdir=~/mitgcm -mods=~/mymods

Packages (collected modules of code)  can be disabled to avoid unnecessary
compilation of unused code. For instance if you know you will not
use GM/Redi, KPP and OBCS and they are appropriate turned-off in the
configuration:
   .../tools/genmake -disable=gmredi,kpp,obcs

If you add some source files you can re-call the previous instance of
genmake with "make makefile".

genmake also reads the file .genmakerc which can be used to configure
options (primarily the command-line options above) for particular experiments.
EOF
   exit
   breaksw
 default:
   echo "Unknown command-line option: " $arg
   echo $0 "-help to show usage"
   exit
   breaksw
 endsw
 shift allargs
end

# Default actions/options

# If platform wasn't specified then determine platform type of the host
if (! $?platform) then
 set platform = (`uname`)
# This let's us distinguish between different Linux platforms
 if ($platform == Linux) then
  set machine = (`uname -m`)
  set platform = ($platform'-'$machine)
 endif
endif
# If name of makefile wasn't specified then use default "Makefile"
if (! $?mfile) set mfile = ( Makefile )

set mach  = ( `uname -a` )
echo Operating system: $mach

# Directories for source, includes, binaries and executables
#
# If -rootdir wasn't specified then assume script is being run from bin
# but if it was supplied then we should place the executable in the build dir
if (! $?ROOTDIR) then
  set pwd=`pwd`
  if ($pwd:t == bin & -d ../model & -d ../eesupp & -d ../pkg) then
    set ROOTDIR = ( .. )
  endif
endif
# Scan for logical ROOTDIR
if (! $?ROOTDIR) then
  foreach dr (. .. ../.. ../../.. ../../../.. ../../../../..)
    if (-d $dr/model & -d $dr/eesupp & -d $dr/pkg) then
      set ROOTDIR = $dr
      echo ROOTDIR was not specified. Setting ROOTDIR = \"$ROOTDIR\"
      break
    endif
  end
endif
if (! $?ROOTDIR) then
  echo Root directory was not specified and could not be determined.
  echo Specify the root location of the model source with -rootdir=dir
  exit 1
endif
if (! -d $ROOTDIR) then
  echo Root directory $ROOTDIR not found.;exit 1
endif
# If -mods wasn't specified then we will assume that we can find all the
# source code in the standard directories
if (! $?MODS) then
 set SOURCEDIRS  = ( )
 set INCLUDEDIRS = ( )
else
 set SOURCEDIRS  = ( $MODS )
 set INCLUDEDIRS = ( $MODS )
endif
if (! $?BUILDDIR) set BUILDDIR = ( . )
if (! -d $BUILDDIR) then
  echo Build directory $BUILDDIR not found.;exit 1
endif
if (! $?EXEDIR) then
  set pwd=`pwd`
  if ($pwd:t == bin & -d ../exe & $ROOTDIR == ..) then
   set EXEDIR = ( ../exe )
  else
   set EXEDIR = ( . )
  endif
endif
if (! -d $EXEDIR) then
  echo Executable directory $EXEDIR not found.;exit 1
endif
if (! $?TOOLSDIR) set TOOLSDIR = ( $ROOTDIR/tools )
if (! -d $TOOLSDIR) then
  echo Tools directory $TOOLSDIR not found.;exit 1
endif
if (! $?EXECUTABLE) set EXECUTABLE  = ( mitgcmuv )

# We have a special set of source files in eesupp/src which
# are generated from some template source files. We'll make them
# first so the appear as regular source code
if (-r $ROOTDIR/eesupp/src/Makefile) then
 echo Making source files in eesupp from templates...
 (cd $ROOTDIR/eesupp/src/; make) >& make_eesupp.errs
 if ($status == 0) then
   rm -f make_eesupp.errs
 else
   cat make_eesupp.errs
   exit 2
 endif
endif

# Now scan the standard source code tree
foreach dr ($SOURCEDIRS)
  set adr=$dr
  if (! -d $adr) then
    echo mods directory $adr not found.; exit 1
  endif
  echo Adding mods dir: $adr
end
if (! $?PACKAGES) then
  set PACKAGES=()
  foreach pkg (`cd $ROOTDIR/pkg; find . -type d | grep -v CVS | sed 's:\./::' | grep -v "\." | sort`)
   if (-d $ROOTDIR/pkg/$pkg) set PACKAGES=($PACKAGES $pkg)
  end
endif
foreach dr ($PACKAGES)
  set enable
  foreach p ($DISABLE)
   if ($p != 'all' & ! -d $ROOTDIR/pkg/$p) then
     echo Specified package \"$p\" does not exist.
     exit 1
   endif
   if ($dr == $p) unset enable
   if ($p == 'all') unset enable
#  The following allows entire trees to be disabled
   if ($dr:h == $p) unset enable
   if ($dr:h:h == $p) unset enable
   if ($dr:h:h:h == $p) unset enable
   if ($dr:h:h:h:h == $p) unset enable
  end
  foreach p ($ENABLE)
   if ($dr == $p) set enable
  end
  if ($?enable) then
    set adr=$ROOTDIR/pkg/$dr
    if (! -d $adr) then
      echo Source directory $adr not found.; exit 1
    endif
    echo Adding pkg dir: $adr
    set SOURCEDIRS = ($SOURCEDIRS $adr)
    set INCLUDEDIRS = ($INCLUDEDIRS $adr)
    switch ($dr)
      case ptracers:
        set DEFINES = ($DEFINES '-DALLOW_PTRACERS'); breaksw
      default:
        breaksw
    endsw
  else
    echo "                                      *" Package \"$dr\" NOT enabled.
    switch ($dr)
      case mom_fluxform:
        set DEFINES = ($DEFINES '-DDISABLE_MOM_FLUXFORM'); breaksw
      case mom_vecinv:
        set DEFINES = ($DEFINES '-DDISABLE_MOM_VECINV'); breaksw
      case generic_advdiff:
        set DEFINES = ($DEFINES '-DDISABLE_GENERIC_ADVDIFF'); breaksw
      default:
        breaksw
    endsw
  endif
end
if (! $?STANDARDDIRS) set STANDARDDIRS=(eesupp model)
foreach dr ($STANDARDDIRS)
  set adr=$ROOTDIR/$dr/src
  if (! -d $adr) then
    echo Source directory $adr not found.; exit 1
  endif
  echo Adding src dir: $adr
  set SOURCEDIRS = ($SOURCEDIRS $adr)
  set idr = `echo $adr | sed 's/src/inc/'`
  set INCLUDEDIRS = ($INCLUDEDIRS $idr)
end

# This is the generic configuration.
# Platform specific options are chosen below
set LN         = ( 'ln -s' )
set CPP        = ( '/lib/cpp -P' )
set S64        = ( '$(TOOLSDIR)/set64bitConst.sh' )
set KPP        = (  )
set FC         = ( 'f77' )
set LINK       = ( 'f77' )
set MAKEDEPEND = ( 'makedepend' )
set INCLUDES   = ( -I. )
set FFLAGS     = (  )
set FOPTIM     = (  )
set CFLAGS     = (  )
set KFLAGS1    = (  )
set KFLAGS2    = (  )
set LIBS       = (  )
set KPPFILES   = (  )
set NOOPTFILES = (  )
set NOOPTFLAGS = (  )
set RMFILES    = (  )

# We often want to use different compile/link options is using MPI
if ($?USEMPI) then
  set USEMPI = ( '+mpi' )
  set DEFINES = ( ${DEFINES} '-DALLOW_USE_MPI -DALWAYS_USE_MPI' )
else
  set USEMPI
# set DEFINES = ( ${DEFINES} '-UALLOW_USE_MPI -UALWAYS_USE_MPI' )
endif

# Platform specific options
switch ($platform$USEMPI)
  case OSF1+mpi:
    echo "Configuring for DEC Alpha with MPI"
    set LIBS       = ( '-lfmpi -lmpi -lkmp_osfp10 -pthread' )
  case OSF1:
    echo "Configuring for DEC Alpha"
    set CPP        = ( '/usr/bin/cpp -P' )
    set DEFINES    = ( ${DEFINES}  '-DTARGET_DEC -DWORDLENGTH=1' )
    set KPP        = ( )
    set KPPFILES   = ( )
    set KFLAGS1    = ( )
    set FC         = ( 'f77' )
    set FFLAGS     = ( '-convert big_endian -r8 -extend_source -automatic -call_shared -notransform_loops -align dcommons' )
    set FOPTIM     = ( '-O5 -fast -tune host -inline all' )
    set NOOPTFLAGS = ( '-O0' )
    set NOOPTFILES = ( 'barrier.F different_multiple.F external_fields_load.F')
    set RMFILES    = ( '*.p.out' )
    breaksw
  case IRIX64+mpi:
    echo "Configuring for SGI Mips with MPI"
    set DEFINES    = ( ${DEFINES} '-DTARGET_SGI -DWORDLENGTH=4' )
    set INCLUDES   = ( '-I/usr/local/mpi/include' )
    set FC         = ( 'mpif77' )
    set LINK       = ( 'mpif77' )
    set FFLAGS     = ( '-extend_source -bytereclen -r10000 -mips4' )
    set FOPTIM     = ( '-O3' )
    set RMFILES    = ( 'rii_files' )
    breaksw
  case IRIX64:
    echo "Configuring for SGI Mips"
    set DEFINES    = ( ${DEFINES} '-DTARGET_SGI -DWORDLENGTH=4' )
    set INCLUDES   = ( '-I/usr/local/mpi/include' )
    set FFLAGS     = ( '-extend_source -mp -mpio -bytereclen -r10000 -mips4 -r8 -static' )
    set FOPTIM     = ( '-O3' )
#   set NOOPTFLAGS = ( '-O0' )
#   set NOOPTFILES = ( 'barrier.F different_multiple.F ' \
#                      'external_fields_load.F' )
    set RMFILES    = ( 'rii_files' )
    breaksw
  case o2:
  case IRIX:
    echo "Configuring for SGI O2 running IRIX 6.5"
    set DEFINES    = ( ${DEFINES} '-DTARGET_SGI -DWORDLENGTH=4' )
    set FFLAGS     = ( '-extend_source -bytereclen -r10000 -mips4' )
    set FOPTIM     = ( '-O2' )
    set NOOPTFLAGS = ( '-O0' )
    breaksw
  case o2+mpi:
  case IRIX+mpi:
    echo "Configuring for SGI O2 running IRIX 6.5 with MPI"
    set DEFINES    = ( ${DEFINES} '-DTARGET_SGI -DWORDLENGTH=4' )
    set FFLAGS     = ( '-extend_source -bytereclen -r10000 -mips4' )
    set FOPTIM     = ( '-O2' )
    set NOOPTFILES = ( 'barrier.F different_multiple.F external_fields_load.F' )
    set NOOPTFLAGS = ( '-O0' )
    set LIBS       = ( '-lmpi' )
    breaksw
  case o2k+mpi:
    echo "Configuring for SGI Origin2000 running IRIX 6.5"
    set DEFINES    = ( ${DEFINES} '-DTARGET_SGI -DWORDLENGTH=4' )
    set INCLUDES   = ( '-I/usr/include' )
    set FFLAGS     = ( '-n32 -extend_source -bytereclen' )
    set FOPTIM     = ( '-O2' )
    set NOOPTFILES = ( 'calc_mom_rhs.F' )
    set NOOPTFLAGS = ( '-O1' )
    set LIBS       = ( '-lmpi -lscs' )
    breaksw
  case onyx:
  case onyx+mpi:
    echo "Configuring for SGI ONYX running IRIX64"
    set DEFINES    = ( ${DEFINES} '-DTARGET_SGI -DWORDLENGTH=4' )
    set FFLAGS     = ( '-extend_source -bytereclen -r10000 -64' )
    set FOPTIM     = ( '-O2' )
    set NOOPTFLAGS = ( '-O0' )
    set NOOPTFILES = ( 'barrier.F different_multiple.F external_fields_load.F' )
    set LIBS       = ( '-lmpi' )
    breaksw
  case SunOS:
    set LN         = ( '/usr/bin/ln -s' )
    set CPP        = ( '/usr/ccs/lib/cpp -P' )
    set MAKEDEPEND = ( ${TOOLSDIR}/xmakedepend )
    set DEFINES    = ( ${DEFINES} '-DTARGET_SUN -DWORDLENGTH=4 -D_d=E' )
    set FFLAGS     = ( '-stackvar -explicitpar -vpara -e -u -noautopar -xtypemap=real:64,double:64,integer:32 -fsimple=0' )
    set FOPTIM     = ( '-dalign -O3 -xarch=v9' )
    set CFLAGS     = ( '-dalign -O3 -xarch=v9' )
    set NOOPTFLAGS = ( '-dalign -O0 -xarch=v9' )
    set NOOPTFILES = ( 'barrier.F different_multiple.F external_fields_load.F ini_vertical_grid.F ini_spherical_polar_grid.F ini_cori.F mon_printstats_rl.F mon_printstats_rs.F aim_aim2dyn.F aim_dyn2aim.F aim_aim2dyn_exchanges.F aim_external_fields_load.F aim_calc_diags.F aim_external_forcing.F aim_do_atmos_physics.F aim_write_diags.F aim_do_inphys.F ')
    breaksw
  case SunOS+mpi:
    set LN         = ( '/usr/bin/ln -s' )
    set CPP        = ( '/usr/ccs/lib/cpp -P' )
    set DEFINES    = ( ${DEFINES} '-DTARGET_SUN -DWORDLENGTH=4 -D_d=E' )
    set INCLUDES   = ( '-I/usr/local/mpi/include' )
    set LIBS       = ( '-L/usr/local/mpi/lib/solaris/ch_shmem -lmpi -lthread' \
    set FFLAGS     = ( '-stackvar -explicitpar -vpara -e -u -noautopar -xtypemap=real:64,double:64,integer:32 -fsimple=0' )
    set FOPTIM     = ( '-dalign -O3 -xarch=v9' )
    set NOOPTFLAGS = ( '-dalign -O0 -xarch=v9' )
                       '-lsocket -lnsl' )
    set NOOPTFILES = ( 'barrier.F different_multiple.F external_fields_load.F ini_vertical_grid.F ini_spherical_polar_grid.F ini_cori.F mon_printstats_rl.F mon_printstats_rs.F')
    breaksw
  case IRIX32:
    echo "Configuring for SGI ONYX running IRIX64"
    set DEFINES    = ( ${DEFINES} '-DTARGET_SGI -DWORDLENGTH=4' )
    set INCLUDES   = ( '-I/usr/include' )
    set FFLAGS     = ( '-extend_source -bytereclen -r10000 -64' )
    set FOPTIM     = ( '-O2' )
    set NOOPTFLAGS = ( '-O0' )
    set NOOPTFILES = ( 'barrier.F different_multiple.F ' \
                       'external_fields_load.F' )
    set LIBS       = ( '-lmpi' )
    breaksw
  case HP-UX+mpi:
    set FC         = ( 'mpif77' )
    set LINK       = ( 'mpif77' )
    set INCLUDES   = ( '-I/opt/mpi/include' )
  case HP-UX:
    echo "Configuring for HP Exemplar"
    set CPP        = ( '/usr/ccs/lbin/cpp -P' )
    set DEFINES    = ( ${DEFINES}  '-DTARGET_HP -DWORDLENGTH=4' )
    set FFLAGS     = ( '+es +U77 +Onoautopar +Oexemplar_model' \
                       '+Okernel_threads' )
    set FOPTIM     = ( '+O2' )
    set NOOPTFLAGS = ( '+O0' )
    set NOOPTFILES = ( 'barrier.F different_multiple.F' \
                       'external_fields_load.F' )
    breaksw
  case Linux-alpha+mpi:
    echo "Configuring with MPI"
    set LIBS       = ( '-L/usr/local/lib/LINUX/ch_p4/ -lfmpich -lmpich' )
    set INCLUDES   = ( '-I/usr/local/include' )
  case Linux-alpha:
    echo "Configuring for " $platform
    set LN         = ( '/bin/ln -s' )
    set CPP        = ( '/lib/cpp  -traditional -P' )
    set DEFINES    = ( ${DEFINES} '-D_BYTESWAPIO -DWORDLENGTH=4' )
    set FC         = ( 'g77' )
    set FFLAGS     = ( ' ' )
    if ($?IEEE) set FFLAGS = ( $FFLAGS '-ffloat-store' )
    set FOPTIM     = ( '-ffast-math -fexpensive-optimizations -fomit-frame-pointer -O3' )
    set LINK       = ( 'g77' )
    breaksw
  case Linux*+pgi+mpi:
    if ($?include_jam_libs) then
     set INCLUDES   = ( '-I/usr/local/mpich-1.2.1/pgi_fortran_binding/include' )
     set LIBS       = ( '-L/usr/local/mpich-1.2.1/pgi_fortran_binding/lib/ -lfmpich -lmpich' )
    else
     set INCLUDES   = ( '-I/usr/local/include' )
     set LIBS       = ( '-L/usr/local/lib/LINUX/ch_p4/ -lfmpich -lmpich' )
    endif
  case Linux*+pgi:
    echo "Configuring for " $platform
    set LN         = ( '/bin/ln -s' )
    set CPP        = ( '/lib/cpp -traditional -P' )
    set DEFINES    = ( ${DEFINES} '-DWORDLENGTH=4' )
    set FC         = ( 'pgf77' )
    set FFLAGS     = ( '-byteswapio -r8 -Mnodclchk -Mextend' )
    set FOPTIM     = ( '-tp p6 -v -O2 -Munroll -Mvect=cachesize:512000,transform -Kieee' )
    set LINK       = ( 'pgf77' )
    breaksw
  case Linux*+mpi:
    set LIBS       = ( '-L/usr/local/lib/LINUX/ch_p4/ -lfmpich -lmpich' )
    set INCLUDES   = ( '-I/usr/local/include' )
  case Linux*:
    echo "Configuring for " $platform
    set LN         = ( '/bin/ln -s' )
    set CPP        = ( '/lib/cpp  -traditional -P' )
    set DEFINES    = ( ${DEFINES} '-D_BYTESWAPIO -DWORDLENGTH=4' )
    set FC         = ( 'g77' )
    set FFLAGS     = ( '-Wimplicit -Wunused -Wuninitialized' )
    if ($?IEEE) set FFLAGS     = ( $FFLAGS '-ffloat-store' )
    set FOPTIM     = ( '-O3 -malign-double -funroll-loops' )
    set LINK       = ( 'g77' )
    breaksw
  case T3E:
  case sn6312:
    echo "Configuring for T3E"
    set CPP        = ( '/opt/ctl/bin/cpp -P')
    set DEFINES    = ( ${DEFINES} '-DTARGET_T3E -DWORDLENGTH=4' )
    set FC         = ( 'f90' )
    set LINK       = ( 'f90' )
    set FFLAGS     = ( '-O 2,fusion' )
    breaksw
  case T90:
  case sn7113:
    echo "Configuring for T90"
    set FC         = ( 'f90' )
    set LINK       = ( 'f90' )
    set LN         = ( '/bin/ln -s' )
    set CPP        = ( '/opt/ctl/bin/cpp -N -P' )
    set DEFINES    = ( ${DEFINES} '-DTARGET_CRAY_VECTOR -DWORDLENGTH=4' )
    set FFLAGS     = ( '-m3 -Rabc -N 132')
    set FOPTIM     = ( '-O0' )
    set NOOPTFLAGS = ( '-O0' )
    set NOOPTFILES = ( 'barrier.F different_multiple.F external_fields_load.F')
    breaksw
  case SV1:
  case sn3002:
    set FC         = ( 'f90' )
    set LINK       = ( 'f90' )
    set LN         = ( '/bin/ln -s' )
    set CPP        = ( '/opt/ctl/bin/cpp -N -P' )
    set DEFINES    = ( ${DEFINES} '-DTARGET_CRAY_VECTOR -DWORDLENGTH=4' )
    set FFLAGS     = ( '-m3 -Rabc -ei -eI -s cf77types -N 132')
    set FOPTIM     = ( '-O0' )
    set NOOPTFLAGS = ( '-O0' )
    set NOOPTFILES = ( 'barrier.F different_multiple.F external_fields_load.F')
    breaksw
  case SP3:
# originally from A. Biastoch, SIO.
    echo "Configuring for IBM SP POWER3"
    set SOURCEDIRS  = ( ./ $SOURCEDIRS )
    set LN         = ( 'ln -s' )
    set DEFINES    = ( ${DEFINES} '-DTARGET_PWR3 -DTARGET_SGI -DWORDLENGTH=4' )
    set INCLUDES   = ( '-I/usr/lpp/ppe.poe/include' )
#    set CPP        = ( '/lib/cpp' )
    set FC         = ( 'mpxlf95' )
    set LINK       = ( 'mpxlf95' )
    set FLAGS      = ( '-O3 -qarch=pwr3 -qtune=pwr3 -qcache=auto -qmaxmem=-1' \
                           '-bmaxdata:0x80000000 -bloadmap:mitgcmuv.map' )
    set FFLAGS     = ( '-qfixed=132 -O3 -qarch=pwr3 -qtune=pwr3 -qcache=auto -qmaxmem=-1' \
                           '-bmaxdata:0x80000000 ' )
    set LDFLAGS    = ( '-O3 -qarch=pwr3 -qtune=pwr3 -qcache=auto -qmaxmem=-1' \
                           '-bmaxdata:0x80000000' )
    set LIBS       = ( ' -L/usr/local/apps/mass -lmass' )
#   set FFLAGS     = ( '-extend_source -mp -mpio -bytereclen -r10000 -mips4' )
#    set FOPTIM     = ( '-O3' )
#   set NOOPTFLAGS = ( '-O0' )
#   set NOOPTFILES = ( 'barrier.F different_multiple.F ' \
#                      'external_fields_load.F' )
    set RMFILES    = ( 'rii_files' )
    breaksw
  default:
    echo "Error: platform not recognized: uname -p = " $platform$USEMPI
    exit
    breaksw
endsw      

###############################################################################
##                                                                           ##
##  Everything below here should not need to be changed. Platform specific   ##
##  changes and code specific changes should be configured above this line.  ##
##                                                                           ##
###############################################################################

# Convert lists of directories into command-line options
foreach inc ($INCLUDEDIRS)
 set INCLUDES = ($INCLUDES -I$inc)
end

# Search for source code
rm -rf .links.tmp;mkdir .links.tmp
echo "# This section creates symbolic links" > srclinks.tmp
echo "" >> srclinks.tmp
echo -n 'SRCFILES = ' > srclist.inc
echo -n 'CSRCFILES = ' > csrclist.inc
echo -n 'HEADERFILES = ' > hlist.inc
foreach dr ($SOURCEDIRS $INCLUDEDIRS .)
 set deplist=( )
 foreach srcfile (`cd $dr; ls *.[hcF]`)
  if (! -r .links.tmp/$srcfile) then
   if (-f $dr/$srcfile) then
    switch ($srcfile:e)
    case F:
     touch .links.tmp/$srcfile
     set deplist=($deplist $srcfile)
     echo    ' \'                   >> srclist.inc
     echo -n "           " $srcfile >> srclist.inc
     breaksw
    case c:
     touch .links.tmp/$srcfile
     set deplist=($deplist $srcfile)
     echo    ' \'                   >> csrclist.inc
     echo -n "           " $srcfile >> csrclist.inc
     breaksw
    case h:
      touch .links.tmp/$srcfile
      set deplist=($deplist $srcfile)
      echo    ' \'                   >> hlist.inc
      echo -n "           " $srcfile >> hlist.inc
     breaksw
    endsw
   endif
  endif
 end
 if ($#deplist != 0) then
  echo "# These files are linked from $dr" >> srclinks.tmp
  echo $deplist':' >> srclinks.tmp
  echo '        $(LN) '$dr'/$@ $@' >> srclinks.tmp
 endif
end
rm -rf .links.tmp
echo "" >> srclist.inc
echo "" >> csrclist.inc
echo "" >> hlist.inc

set THISHOSTNAME = ( `hostname` )
set THISCWD = ( `pwd` )
set THISDATE = ( `date` )

if (-r $mfile) mv -f $mfile $mfile.bak
###########################################
## This is the template for the makefile ##
###########################################
echo Creating makefile: $mfile
echo "# Multithreaded + multi-processing makefile for $mach" > ${mfile}
echo "# This makefile was generated automatically on" >> ${mfile}
echo "#    $THISDATE" >> ${mfile}
echo "# by the command:" >> ${mfile}
echo "#    ${0} $argv" >> ${mfile}
echo "# executed by:" >> ${mfile}
echo "#    $USER@${THISHOSTNAME}:${THISCWD}" >> ${mfile}
cat >> ${mfile} <<EOF
# 
# BUILDDIR     : Directory where object files are written
# SOURCEDIRS   : Directories containing the source (.F) files
# INCLUDEDIRS  : Directories containing the header-source (.h) files
# EXEDIR       : Directory where executable that is generated is written
# EXECUTABLE   : Full path of executable binary
#
# CPP          : C-preprocessor command
# INCLUDES     : Directories searched for header files
# DEFINES      : Macro definitions for CPP
# MAKEDEPEND   : Dependency generator
# KPP          : Special preprocessor command (specific to platform)
# KFLAGS       : Flags for KPP
# FC           : Fortran compiler command
# FFLAGS       : Configuration/debugging options for FC
# FOPTIM       : Optimization options for FC
# LINK         : Command for link editor program
# LIBS         : Library flags /or/ additional optimization/debugging flags

ROOTDIR     = ${ROOTDIR}
BUILDDIR    = ${BUILDDIR}  
SOURCEDIRS  = ${SOURCEDIRS}
INCLUDEDIRS = ${INCLUDEDIRS}
EXEDIR      = ${EXEDIR}
EXECUTABLE  = \$(EXEDIR)/${EXECUTABLE}
TOOLSDIR    = ${TOOLSDIR}

EOF


# JAM libraries on Hyades
if ($?include_jam_libs) then
cat >> ${mfile} <<EOF
# extra stuff for Hyades ............................................
HYADES_DIR = /u/u0/cnh/jam-lib/software
HYADES_DIR = /u/u0/cnh/jam-lib-twoproc
HYADES_DIR = /usr/local/jamlib/current/dual_proc
WORK_DIR   = \$(HYADES_DIR)
DEPOSIT_DIR = linux_bin

STARTXOBJDIR = startx_util/\$(DEPOSIT_DIR)
STARTXOBJ = \$(WORK_DIR)/startx_util/\$(DEPOSIT_DIR)/startx_timer.o \
            \$(WORK_DIR)/startx_util/\$(DEPOSIT_DIR)/startx_util.o \
            \$(WORK_DIR)/startx_util/\$(DEPOSIT_DIR)/client.o \
            \$(WORK_DIR)/startx_util/\$(DEPOSIT_DIR)/csutil.o

JAMOBJDIR  = jam/\$(DEPOSIT_DIR)
JAMOBJ     = \$(WORK_DIR)/jam/\$(DEPOSIT_DIR)/jam_init.o \
             \$(WORK_DIR)/jam/\$(DEPOSIT_DIR)/jam_kernel.o \
             \$(WORK_DIR)/jam/\$(DEPOSIT_DIR)/jam_malloc.o \
             \$(WORK_DIR)/jam/\$(DEPOSIT_DIR)/jam_vmalloc.o \
             \$(WORK_DIR)/jam/\$(DEPOSIT_DIR)/jam_mutex.o

JAMCOBJDIR = jam_collective/\$(DEPOSIT_DIR)
JAMCOBJ    = \$(WORK_DIR)/jam_collective/\$(DEPOSIT_DIR)/jam_collective.o

XLIBS      = \$(STARTXOBJ) \$(JAMOBJ) \$(JAMCOBJ)

# ..................................................................

EOF
endif


cat >> ${mfile} <<EOF
# Unix ln (link)
LN = ${LN}
# C preprocessor
CPP = cat \$< | ${S64} | ${CPP}
# Dependency generator
MAKEDEPEND = ${MAKEDEPEND}
# Special preprocessor (KAP on DECs, FPP on Crays)
KPP = ${KPP}
# Fortran compiler
FC = ${FC}
# Link editor
LINK = ${LINK}

# Defines for CPP
DEFINES = ${DEFINES}
# Includes for CPP
INCLUDES = ${INCLUDES}
# Flags for KPP
KFLAGS1 = ${KFLAGS1}
KFLAGS2 = ${KFLAGS2}
# Optim./debug for FC
FFLAGS = ${FFLAGS}
FOPTIM = ${FOPTIM}
# Flags for CC
CFLAGS = ${CFLAGS}
# Files that should not be optimized
NOOPTFILES = ${NOOPTFILES}
NOOPTFLAGS = ${NOOPTFLAGS}
# Flags and libraries needed for linking
LIBS = ${LIBS} \$(XLIBS)

EOF

cat srclist.inc  >> ${mfile}
cat csrclist.inc >> ${mfile}
cat hlist.inc >> ${mfile}
echo 'F77FILES =  $(SRCFILES:.F=.f)'                    >> ${mfile}
echo 'OBJFILES =  $(SRCFILES:.F=.o) $(CSRCFILES:.c=.o)' >> ${mfile}

rm -f srclist.inc csrclist.inc hlist.inc flist.tmp clist.tmp

cat >> ${mfile} <<EOF

.SUFFIXES:
.SUFFIXES: .o .f .p .F .c

all: \$(EXECUTABLE)
\$(EXECUTABLE): \$(OBJFILES)
        \$(LINK) -o \$@ \$(FFLAGS) \$(FOPTIM) \$(OBJFILES) \$(LIBS)
depend:
        @make links
        \$(MAKEDEPEND) -o .f \$(DEFINES) \$(INCLUDES) \$(SRCFILES)

links: \$(SRCFILES) \$(CSRCFILES) \$(HEADERFILES)

small_f: \$(F77FILES)

output.txt: \$(EXECUTABLE)
        @printf 'running ... '
        @\$(EXECUTABLE) > \$@

clean:
        -rm -rf *.o *.f *.p ${RMFILES}
Clean:
        @make clean
        @make cleanlinks
        -rm -f Makefile.bak
CLEAN:
        @make Clean
        -find \$(EXEDIR) -name "*.meta" -exec rm {} \;
        -find \$(EXEDIR) -name "*.data" -exec rm {} \;
        -rm -f \$(EXECUTABLE)

makefile:
        ${0} $argv
cleanlinks:
        -find . -type l -exec rm {} \;

# The normal chain of rules is (  .F - .f - .o  )
.F.f:
        \$(CPP) \$(DEFINES) \$(INCLUDES) > \$@
.f.o:
        \$(FC) \$(FFLAGS) \$(FOPTIM) -c \$<
.c.o:
        \$(CC) \$(CFLAGS) -c \$<

# Special exceptions that use the ( .F - .p - .f - .o ) rule-chain
.F.p:
        \$(CPP) \$(DEFINES) \$(INCLUDES) > \$@
.p.f:
        \$(KPP) \$(KFLAGS1)\$@ \$(KFLAGS2) \$<
EOF

# Make list of "exceptions" that need ".p" files
foreach sf ($KPPFILES)
 set fname=( ${sf:t} )
 echo "${fname:r}.f: ${fname:r}.p" >> ${mfile}
end
foreach sf ($NOOPTFILES)
 set fname=( ${sf:t} )
 echo "${fname:r}.o: ${fname:r}.f" >> ${mfile}
 echo ' $(FC) $(FFLAGS) $(NOOPTFLAGS) -c $<' >> ${mfile}
end
echo "" >> ${mfile}

# Add rules for links
cat srclinks.tmp >> ${mfile}
rm -f srclinks.tmp

echo "" >> ${mfile}
echo "# DO NOT DELETE" >> ${mfile}

exit