Annotation of /MITgcm/tools/build_options/SUPER-UX_SX-ACE_sxf90_awi

#!/bin/bash
#
# $Header: /u/gcmpack/MITgcm/tools/build_options/SUPER-UX_SX-ACE_sxf90_awi,v 1.2 2015/04/08 07:30:01 mlosch Exp $
# $Name:  $

# for cross compiling on stan1.awi.de
# uname -a:
# Linux stan1.awi.de 2.6.32-358.18.1.el6.x86_64 #1 SMP Fri Aug 2 17:04:38 EDT 2013 x86_64 x86_64 x86_64 GNU/Linux
# before using this build-options file make sure you have the correct
# modules loaded, currently:
# module load sxf90 sxc++ sxmpi sxnetcdf


CC='sxcc -sxace'
if test "x$MPI" = xtrue ; then
  FC='sxmpif90'
  LINK='sxmpif90'
 #LINK='sxmpif90 -p' # with profiler
else
  FC='sxf90'
  LINK='sxf90'
fi

FC_NAMEMANGLE="#define FC_NAMEMANGLE(X)  X ## _"
# nec use
DEFINES='-DTARGET_NEC_SX -DWORDLENGTH=1 -DHAVE_CLOC -UHAVE_SIGREG -DSEAICE_VECTORIZE_LSR -DSEAICE_LSR_ZEBRA -DCG2D_OUTERLOOPITERS=10 -DCG3D_OUTERLOOPITERS=10'
CPP='/lib/cpp -traditional -P'
RMFILES='*.L'

FFLAGS='-Pstack -sxace'
# automatic inlining for routines < 50 lines (default) and in the same file
# where they are to be inlined (we do not have too many of those)
FFLAGS="$FFLAGS -pi"

# This is how you inline external routines if they are longer than 50 lines
# and live in a separate file (the actual routines depend on the packages
# used, therefore there are only a few examples here); unfortunately, these
# flags break the genmake2 tests, so they get an extra flag variable that
# is not tested in genmake2
FEXTRAFLAGS='-pi auto fullmsg exp=barrier,ucase,timestep_tracer,ilnblnk,ifnblnk,cycle_tracer,pressure_for_eos,sw_temp,sw_ptmp,gsw_pt_from_ct rexp=fool_the_compiler,fool_the_compiler_r8,bar2,sw_adtg,gsw_ct_from_pt,gsw_gibbs_pt0_pt0 expin=barrier.f,timestep_tracer.f,fool_the_compiler.f,bar2.f,utils.f,cycle_tracer.f,pressure_for_eos.f,seawater.f,gsw_teos10.f'
# additional candidates for inlining are parts of packages that are not
# always used, therefore use this at your own risk:
#FEXTRAFLAGS="${FEXTRAFLAGS} -pi fullmsg exp= expin="
#
# Note: explicit inlining requires that all files (*.f) are already
# available, so that the building sequence should be 
# genmake2 [OPTIONS] && make depend && make small_f && make

#-- additional options:
# include a formated code listing and a listing of compiler transformations
# in *.L files
#FFLAGS="$FFLAGS -R2"
# assume a loop count of 5,000,000 instead of estimating it from field
# declarations and include details messages about vectorization (if -R2
# specified)
#FFLAGS=$FFLAGS' -Wf "-pvctl noassume loopcnt=5000000 fullmsg"'
# trace output for performance analysis
#FFLAGS=$FFLAGS' -ftrace'
# default automatic optimization level
#FOPTIM='-C vopt'

# these files require lower optimization
NOOPTFILES='ini_forcing.F mom_calc_visc.F'
NOOPTFILES="$NOOPTFILES ptracers_dyn_state_data_mod.F ptracers_dyn_state_mod.F"
if test "x$IEEE" = x ; then
    # highest automatic optimization level, handle with care
    FOPTIM='-C hopt'
    NOOPTFLAGS='-C vopt'
else
    if test "x$DEVEL" = x ; then  #- no optimisation + IEEE :
	FOPTIM='-C vsafe'
	NOOPTFLAGS=$FOPTIM
    else                          #- development/check options:
	# enable runtime checking of array bounds and arguments of routines
	FOPTIM='-C vsafe -g -eC -eP'
	NOOPTFLAGS=$FOPTIM
        # remove extra flags and explicit inlining
	FEXTRAFLAGS=
    fi
fi

# awi specific paths and stuff, available only after "module load sxnetcdf"
INCLUDES="-I${SX_NETCDF_INC}"
LIBS="-L${SX_NETCDF_LIB} -lnetcdf"

if test "x$MPI" = xtrue ; then
    # path to mpi header files, available only after "module load sxmpi"
    INCLUDES="$INCLUDES -I${SX_BASE_MPI}/include"
fi

1	mlosch	1.1	#!/bin/bash
2			#
3	mlosch	1.3	# $Header: /u/gcmpack/MITgcm/tools/build_options/SUPER-UX_SX-ACE_sxf90_awi,v 1.2 2015/04/08 07:30:01 mlosch Exp $
4	mlosch	1.1	# $Name: $
5
6			# for cross compiling on stan1.awi.de
7			# uname -a:
8			# Linux stan1.awi.de 2.6.32-358.18.1.el6.x86_64 #1 SMP Fri Aug 2 17:04:38 EDT 2013 x86_64 x86_64 x86_64 GNU/Linux
9			# before using this build-options file make sure you have the correct
10			# modules loaded, currently:
11			# module load sxf90 sxc++ sxmpi sxnetcdf
12
13
14			CC='sxcc -sxace'
15			if test "x$MPI" = xtrue ; then
16			FC='sxmpif90'
17			LINK='sxmpif90'
18			#LINK='sxmpif90 -p' # with profiler
19			else
20			FC='sxf90'
21			LINK='sxf90'
22			fi
23
24			FC_NAMEMANGLE="#define FC_NAMEMANGLE(X) X ## _"
25			# nec use
26	mlosch	1.3	DEFINES='-DTARGET_NEC_SX -DWORDLENGTH=1 -DHAVE_CLOC -UHAVE_SIGREG -DSEAICE_VECTORIZE_LSR -DSEAICE_LSR_ZEBRA -DCG2D_OUTERLOOPITERS=10 -DCG3D_OUTERLOOPITERS=10'
27	mlosch	1.1	CPP='/lib/cpp -traditional -P'
28			RMFILES='*.L'
29
30			FFLAGS='-Pstack -sxace'
31			# automatic inlining for routines < 50 lines (default) and in the same file
32			# where they are to be inlined (we do not have too many of those)
33	mlosch	1.2	FFLAGS="$FFLAGS -pi"
34	mlosch	1.1
35			# This is how you inline external routines if they are longer than 50 lines
36			# and live in a separate file (the actual routines depend on the packages
37			# used, therefore there are only a few examples here); unfortunately, these
38			# flags break the genmake2 tests, so they get an extra flag variable that
39			# is not tested in genmake2
40			FEXTRAFLAGS='-pi auto fullmsg exp=barrier,ucase,timestep_tracer,ilnblnk,ifnblnk,cycle_tracer,pressure_for_eos,sw_temp,sw_ptmp,gsw_pt_from_ct rexp=fool_the_compiler,fool_the_compiler_r8,bar2,sw_adtg,gsw_ct_from_pt,gsw_gibbs_pt0_pt0 expin=barrier.f,timestep_tracer.f,fool_the_compiler.f,bar2.f,utils.f,cycle_tracer.f,pressure_for_eos.f,seawater.f,gsw_teos10.f'
41			# additional candidates for inlining are parts of packages that are not
42			# always used, therefore use this at your own risk:
43	mlosch	1.2	#FEXTRAFLAGS="${FEXTRAFLAGS} -pi fullmsg exp= expin="
44	mlosch	1.1	#
45			# Note: explicit inlining requires that all files (*.f) are already
46			# available, so that the building sequence should be
47			# genmake2 [OPTIONS] && make depend && make small_f && make
48
49			#-- additional options:
50			# include a formated code listing and a listing of compiler transformations
51			# in *.L files
52	mlosch	1.2	#FFLAGS="$FFLAGS -R2"
53	mlosch	1.1	# assume a loop count of 5,000,000 instead of estimating it from field
54			# declarations and include details messages about vectorization (if -R2
55			# specified)
56			#FFLAGS=$FFLAGS' -Wf "-pvctl noassume loopcnt=5000000 fullmsg"'
57			# trace output for performance analysis
58			#FFLAGS=$FFLAGS' -ftrace'
59			# default automatic optimization level
60			#FOPTIM='-C vopt'
61
62	mlosch	1.2	# these files require lower optimization
63			NOOPTFILES='ini_forcing.F mom_calc_visc.F'
64			NOOPTFILES="$NOOPTFILES ptracers_dyn_state_data_mod.F ptracers_dyn_state_mod.F"
65	mlosch	1.1	if test "x$IEEE" = x ; then
66	mlosch	1.2	# highest automatic optimization level, handle with care
67			FOPTIM='-C hopt'
68			NOOPTFLAGS='-C vopt'
69	mlosch	1.1	else
70	mlosch	1.2	if test "x$DEVEL" = x ; then #- no optimisation + IEEE :
71			FOPTIM='-C vsafe'
72			NOOPTFLAGS=$FOPTIM
73			else #- development/check options:
74			# enable runtime checking of array bounds and arguments of routines
75			FOPTIM='-C vsafe -g -eC -eP'
76			NOOPTFLAGS=$FOPTIM
77			# remove extra flags and explicit inlining
78			FEXTRAFLAGS=
79			fi
80	mlosch	1.1	fi
81
82	mlosch	1.2	# awi specific paths and stuff, available only after "module load sxnetcdf"
83			INCLUDES="-I${SX_NETCDF_INC}"
84	mlosch	1.1	LIBS="-L${SX_NETCDF_LIB} -lnetcdf"
85
86			if test "x$MPI" = xtrue ; then
87	mlosch	1.2	# path to mpi header files, available only after "module load sxmpi"
88	mlosch	1.1	INCLUDES="$INCLUDES -I${SX_BASE_MPI}/include"
89			fi
90