C $Header: /home/ubuntu/mnt/e9_copy/MITgcm/pkg/kpp/kpp_routines.F,v 1.48 2010/01/20 01:32:50 jmc Exp $ C $Name: $ #include "PACKAGES_CONFIG.h" #include "KPP_OPTIONS.h" C-- File kpp_routines.F: subroutines needed to implement C-- KPP vertical mixing scheme C-- Contents C-- o KPPMIX - Main driver and interface routine. C-- o BLDEPTH - Determine oceanic planetary boundary layer depth. C-- o WSCALE - Compute turbulent velocity scales. C-- o RI_IWMIX - Compute interior viscosity diffusivity coefficients. C-- o Z121 - Apply 121 vertical smoothing. C-- o SMOOTH_HORIZ- Apply horizontal smoothing to global array. C-- o BLMIX - Boundary layer mixing coefficients. C-- o ENHANCE - Enhance diffusivity at boundary layer interface. C-- o STATEKPP - Compute buoyancy-related input arrays. C-- o KPP_DOUBLEDIFF - Compute double diffusive contribution to diffusivities c*********************************************************************** SUBROUTINE KPPMIX ( I kmtj, shsq, dvsq, ustar, msk I , bo, bosol #ifdef ALLOW_SALT_PLUME I , boplume,SPDepth #endif /* ALLOW_SALT_PLUME */ I , dbloc, Ritop, coriol I , diffusKzS, diffusKzT I , ikppkey O , diffus U , ghat O , hbl I , bi, bj, myTime, myIter, myThid ) c----------------------------------------------------------------------- c c Main driver subroutine for kpp vertical mixing scheme and c interface to greater ocean model c c written by: bill large, june 6, 1994 c modified by: jan morzel, june 30, 1994 c bill large, august 11, 1994 c bill large, january 25, 1995 : "dVsq" and 1d code c detlef stammer, august 1997 : for use with MIT GCM Classic c d. menemenlis, june 1998 : for use with MIT GCM UV c c----------------------------------------------------------------------- IMPLICIT NONE #include "SIZE.h" #include "EEPARAMS.h" #include "PARAMS.h" #include "KPP_PARAMS.h" #ifdef ALLOW_AUTODIFF # include "tamc.h" #endif c input c bi, bj :: Array indices on which to apply calculations c myTime :: Current time in simulation c myIter :: Current iteration number in simulation c myThid :: My Thread Id. number c kmtj (imt) - number of vertical layers on this row c msk (imt) - surface mask (=1 if water, =0 otherwise) c shsq (imt,Nr) - (local velocity shear)^2 ((m/s)^2) c dvsq (imt,Nr) - (velocity shear re sfc)^2 ((m/s)^2) c ustar (imt) - surface friction velocity (m/s) c bo (imt) - surface turbulent buoy. forcing (m^2/s^3) c bosol (imt) - radiative buoyancy forcing (m^2/s^3) c boplume(imt) - haline buoyancy forcing (m^2/s^3) c dbloc (imt,Nr) - local delta buoyancy across interfaces (m/s^2) c dblocSm(imt,Nr) - horizontally smoothed dbloc (m/s^2) c stored in ghat to save space c Ritop (imt,Nr) - numerator of bulk Richardson Number c (zref-z) * delta buoyancy w.r.t. surface ((m/s)^2) c coriol (imt) - Coriolis parameter (1/s) c diffusKzS(imt,Nr)- background vertical diffusivity for scalars (m^2/s) c diffusKzT(imt,Nr)- background vertical diffusivity for theta (m^2/s) c note: there is a conversion from 2-D to 1-D for input output variables, c e.g., hbl(sNx,sNy) -> hbl(imt), c where hbl(i,j) -> hbl((j-1)*sNx+i) INTEGER bi, bj _RL myTime integer myIter integer myThid integer kmtj (imt ) _RL shsq (imt,Nr) _RL dvsq (imt,Nr) _RL ustar (imt ) _RL bo (imt ) _RL bosol (imt ) #ifdef ALLOW_SALT_PLUME _RL boplume (imt ) _RL SPDepth (imt ) #endif /* ALLOW_SALT_PLUME */ _RL dbloc (imt,Nr) _RL Ritop (imt,Nr) _RL coriol (imt ) _RS msk (imt ) _RL diffusKzS(imt,Nr) _RL diffusKzT(imt,Nr) integer ikppkey c output c diffus (imt,1) - vertical viscosity coefficient (m^2/s) c diffus (imt,2) - vertical scalar diffusivity (m^2/s) c diffus (imt,3) - vertical temperature diffusivity (m^2/s) c ghat (imt) - nonlocal transport coefficient (s/m^2) c hbl (imt) - mixing layer depth (m) _RL diffus(imt,0:Nrp1,mdiff) _RL ghat (imt,Nr) _RL hbl (imt) #ifdef ALLOW_KPP c local c kbl (imt ) - index of first grid level below hbl c bfsfc (imt ) - surface buoyancy forcing (m^2/s^3) c casea (imt ) - 1 in case A; 0 in case B c stable (imt ) - 1 in stable forcing; 0 if unstable c dkm1 (imt, mdiff) - boundary layer diffusivity at kbl-1 level c blmc (imt,Nr,mdiff) - boundary layer mixing coefficients c sigma (imt ) - normalized depth (d / hbl) c Rib (imt,Nr ) - bulk Richardson number integer kbl(imt ) _RL bfsfc (imt ) _RL casea (imt ) _RL stable (imt ) _RL dkm1 (imt, mdiff) _RL blmc (imt,Nr,mdiff) _RL sigma (imt ) _RL Rib (imt,Nr ) integer i, k, md c----------------------------------------------------------------------- c compute interior mixing coefficients everywhere, due to constant c internal wave activity, static instability, and local shear c instability. c (ghat is temporary storage for horizontally smoothed dbloc) c----------------------------------------------------------------------- cph( cph these storings avoid recomp. of Ri_iwmix CADJ STORE ghat = comlev1_kpp, key=ikppkey, kind=isbyte CADJ STORE dbloc = comlev1_kpp, key=ikppkey, kind=isbyte cph) call Ri_iwmix ( I kmtj, shsq, dbloc, ghat I , diffusKzS, diffusKzT I , ikppkey O , diffus, myThid ) cph( cph these storings avoid recomp. of Ri_iwmix cph DESPITE TAFs 'not necessary' warning! CADJ STORE dbloc = comlev1_kpp, key=ikppkey, kind=isbyte CADJ STORE shsq = comlev1_kpp, key=ikppkey, kind=isbyte CADJ STORE ghat = comlev1_kpp, key=ikppkey, kind=isbyte CADJ STORE diffus = comlev1_kpp, key=ikppkey, kind=isbyte cph) c----------------------------------------------------------------------- c set seafloor values to zero and fill extra "Nrp1" coefficients c for blmix c----------------------------------------------------------------------- do md = 1, mdiff do k=1,Nrp1 do i = 1,imt if(k.ge.kmtj(i)) diffus(i,k,md) = 0.0 end do end do end do c----------------------------------------------------------------------- c compute boundary layer mixing coefficients: c c diagnose the new boundary layer depth c----------------------------------------------------------------------- call bldepth ( I kmtj I , dvsq, dbloc, Ritop, ustar, bo, bosol #ifdef ALLOW_SALT_PLUME I , boplume,SPDepth #endif /* ALLOW_SALT_PLUME */ I , coriol I , ikppkey O , hbl, bfsfc, stable, casea, kbl, Rib, sigma I , bi, bj, myTime, myIter, myThid ) CADJ STORE hbl,bfsfc,stable,casea,kbl = comlev1_kpp, CADJ & key=ikppkey, kind=isbyte c----------------------------------------------------------------------- c compute boundary layer diffusivities c----------------------------------------------------------------------- call blmix ( I ustar, bfsfc, hbl, stable, casea, diffus, kbl O , dkm1, blmc, ghat, sigma, ikppkey I , myThid ) cph( CADJ STORE dkm1,blmc,ghat = comlev1_kpp, CADJ & key=ikppkey, kind=isbyte CADJ STORE hbl, kbl, diffus, casea = comlev1_kpp, CADJ & key=ikppkey, kind=isbyte cph) c----------------------------------------------------------------------- c enhance diffusivity at interface kbl - 1 c----------------------------------------------------------------------- call enhance ( I dkm1, hbl, kbl, diffus, casea U , ghat O , blmc I , myThid ) cph( cph avoids recomp. of enhance CADJ STORE blmc = comlev1_kpp, key=ikppkey, kind=isbyte cph) c----------------------------------------------------------------------- c combine interior and boundary layer coefficients and nonlocal term c !!!NOTE!!! In shallow (2-level) regions and for shallow mixed layers c (< 1 level), diffusivity blmc can become negative. The max-s below c are a hack until this problem is properly diagnosed and fixed. c----------------------------------------------------------------------- do k = 1, Nr do i = 1, imt if (k .lt. kbl(i)) then #ifdef ALLOW_SHELFICE C when there is shelfice on top (msk(i)=0), reset the boundary layer C mixing coefficients blmc to pure Ri-number based mixing blmc(i,k,1) = max ( blmc(i,k,1)*msk(i), & diffus(i,k,1) ) blmc(i,k,2) = max ( blmc(i,k,2)*msk(i), & diffus(i,k,2) ) blmc(i,k,3) = max ( blmc(i,k,3)*msk(i), & diffus(i,k,3) ) #endif /* not ALLOW_SHELFICE */ diffus(i,k,1) = max ( blmc(i,k,1), viscArNr(1) ) diffus(i,k,2) = max ( blmc(i,k,2), diffusKzS(i,Nr) ) diffus(i,k,3) = max ( blmc(i,k,3), diffusKzT(i,Nr) ) else ghat(i,k) = 0. _d 0 endif end do end do #endif /* ALLOW_KPP */ return end c************************************************************************* subroutine bldepth ( I kmtj I , dvsq, dbloc, Ritop, ustar, bo, bosol #ifdef ALLOW_SALT_PLUME I , boplume,SPDepth #endif /* ALLOW_SALT_PLUME */ I , coriol I , ikppkey O , hbl, bfsfc, stable, casea, kbl, Rib, sigma I , bi, bj, myTime, myIter, myThid ) c the oceanic planetary boundary layer depth, hbl, is determined as c the shallowest depth where the bulk Richardson number is c equal to the critical value, Ricr. c c bulk Richardson numbers are evaluated by computing velocity and c buoyancy differences between values at zgrid(kl) < 0 and surface c reference values. c in this configuration, the reference values are equal to the c values in the surface layer. c when using a very fine vertical grid, these values should be c computed as the vertical average of velocity and buoyancy from c the surface down to epsilon*zgrid(kl). c c when the bulk Richardson number at k exceeds Ricr, hbl is c linearly interpolated between grid levels zgrid(k) and zgrid(k-1). c c The water column and the surface forcing are diagnosed for c stable/ustable forcing conditions, and where hbl is relative c to grid points (caseA), so that conditional branches can be c avoided in later subroutines. c IMPLICIT NONE #include "SIZE.h" #include "EEPARAMS.h" #include "PARAMS.h" #include "KPP_PARAMS.h" #ifdef ALLOW_AUTODIFF # include "tamc.h" #endif c input c------ c bi, bj :: Array indices on which to apply calculations c myTime :: Current time in simulation c myIter :: Current iteration number in simulation c myThid :: My Thread Id. number c kmtj : number of vertical layers c dvsq : (velocity shear re sfc)^2 ((m/s)^2) c dbloc : local delta buoyancy across interfaces (m/s^2) c Ritop : numerator of bulk Richardson Number c =(z-zref)*dbsfc, where dbsfc=delta c buoyancy with respect to surface ((m/s)^2) c ustar : surface friction velocity (m/s) c bo : surface turbulent buoyancy forcing (m^2/s^3) c bosol : radiative buoyancy forcing (m^2/s^3) c boplume : haline buoyancy forcing (m^2/s^3) c coriol : Coriolis parameter (1/s) INTEGER bi, bj _RL myTime integer myIter integer myThid integer kmtj(imt) _RL dvsq (imt,Nr) _RL dbloc (imt,Nr) _RL Ritop (imt,Nr) _RL ustar (imt) _RL bo (imt) _RL bosol (imt) _RL coriol (imt) integer ikppkey #ifdef ALLOW_SALT_PLUME _RL boplume (imt) _RL SPDepth (imt) #endif /* ALLOW_SALT_PLUME */ c output c-------- c hbl : boundary layer depth (m) c bfsfc : Bo+radiation absorbed to d=hbf*hbl (m^2/s^3) c stable : =1 in stable forcing; =0 unstable c casea : =1 in case A, =0 in case B c kbl : -1 of first grid level below hbl c Rib : Bulk Richardson number c sigma : normalized depth (d/hbl) _RL hbl (imt) _RL bfsfc (imt) _RL stable (imt) _RL casea (imt) integer kbl(imt) _RL Rib (imt,Nr) _RL sigma (imt) #ifdef ALLOW_KPP c local c------- c wm, ws : turbulent velocity scales (m/s) _RL wm(imt), ws(imt) _RL worka(imt) _RL bvsq, vtsq, hekman, hmonob, hlimit, tempVar1, tempVar2 integer i, kl _RL p5 , eins parameter ( p5=0.5, eins=1.0 ) _RL minusone parameter ( minusone=-1.0 ) #ifdef ALLOW_AUTODIFF_TAMC integer kkppkey #endif #ifdef ALLOW_DIAGNOSTICS c KPPBFSFC - Bo+radiation absorbed to d=hbf*hbl + plume (m^2/s^3) _RL KPPBFSFC(imt,Nr) _RL KPPRi(imt,Nr) #endif /* ALLOW_DIAGNOSTICS */ c find bulk Richardson number at every grid level until > Ricr c c note: the reference depth is -epsilon/2.*zgrid(k), but the reference c u,v,t,s values are simply the surface layer values, c and not the averaged values from 0 to 2*ref.depth, c which is necessary for very fine grids(top layer < 2m thickness) c note: max values when Ricr never satisfied are c kbl(i)=kmtj(i) and hbl(i)=-zgrid(kmtj(i)) c initialize hbl and kbl to bottomed out values do i = 1, imt Rib(i,1) = 0. _d 0 kbl(i) = max(kmtj(i),1) hbl(i) = -zgrid(kbl(i)) end do #ifdef ALLOW_DIAGNOSTICS do kl = 1, Nr do i = 1, imt KPPBFSFC(i,kl) = 0. _d 0 KPPRi(i,kl) = 0. _d 0 enddo enddo #endif /* ALLOW_DIAGNOSTICS */ do kl = 2, Nr #ifdef ALLOW_AUTODIFF_TAMC kkppkey = (ikppkey-1)*Nr + kl #endif c compute bfsfc = sw fraction at hbf * zgrid do i = 1, imt worka(i) = zgrid(kl) end do CADJ store worka = comlev1_kpp_k, key = kkppkey, kind=isbyte call SWFRAC( I imt, hbf, U worka, I myTime, myIter, myThid ) CADJ store worka = comlev1_kpp_k, key = kkppkey, kind=isbyte do i = 1, imt c use caseA as temporary array casea(i) = -zgrid(kl) c compute bfsfc= Bo + radiative contribution down to hbf * hbl bfsfc(i) = bo(i) + bosol(i)*(1. - worka(i)) end do #ifdef ALLOW_SALT_PLUME c compute bfsfc = plume fraction at hbf * zgrid IF ( useSALT_PLUME ) THEN do i = 1, imt worka(i) = zgrid(kl) enddo call SALT_PLUME_FRAC( I imt, hbf,SPDepth, U worka, I myTime, myIter, myThid) do i = 1, imt bfsfc(i) = bfsfc(i) + boplume(i)*(1. - worka(i)) enddo ENDIF #endif /* ALLOW_SALT_PLUME */ #ifdef ALLOW_DIAGNOSTICS do i = 1, imt KPPBFSFC(i,kl) = bfsfc(i) enddo #endif /* ALLOW_DIAGNOSTICS */ do i = 1, imt stable(i) = p5 + sign(p5,bfsfc(i)) sigma(i) = stable(i) + (1. - stable(i)) * epsilon enddo c----------------------------------------------------------------------- c compute velocity scales at sigma, for hbl= caseA = -zgrid(kl) c----------------------------------------------------------------------- call wscale ( I sigma, casea, ustar, bfsfc, O wm, ws, myThid ) CADJ store ws = comlev1_kpp_k, key = kkppkey, kind=isbyte do i = 1, imt c----------------------------------------------------------------------- c compute the turbulent shear contribution to Rib c----------------------------------------------------------------------- bvsq = p5 * 1 ( dbloc(i,kl-1) / (zgrid(kl-1)-zgrid(kl ))+ 2 dbloc(i,kl ) / (zgrid(kl )-zgrid(kl+1))) if (bvsq .eq. 0. _d 0) then vtsq = 0. _d 0 else vtsq = -zgrid(kl) * ws(i) * sqrt(abs(bvsq)) * Vtc endif c compute bulk Richardson number at new level c note: Ritop needs to be zero on land and ocean bottom c points so that the following if statement gets triggered c correctly; otherwise, hbl might get set to (big) negative c values, that might exceed the limit for the "exp" function c in "SWFRAC" c c rg: assignment to double precision variable to avoid overflow c ph: test for zero nominator c tempVar1 = dvsq(i,kl) + vtsq tempVar2 = max(tempVar1, phepsi) Rib(i,kl) = Ritop(i,kl) / tempVar2 #ifdef ALLOW_DIAGNOSTICS KPPRi(i,kl) = Rib(i,kl) #endif end do end do #ifdef ALLOW_DIAGNOSTICS CALL DIAGNOSTICS_FILL(KPPBFSFC,'KPPbfsfc',0,Nr,2,bi,bj,myThid) CALL DIAGNOSTICS_FILL(KPPRi ,'KPPRi ',0,Nr,2,bi,bj,myThid) #endif /* ALLOW_DIAGNOSTICS */ cph( cph without this store, there is a recomputation error for cph rib in adbldepth (probably partial recomputation problem) CADJ store Rib = comlev1_kpp CADJ & , key=ikppkey, kind=isbyte, CADJ & shape = (/ (sNx+2*OLx)*(sNy+2*OLy),Nr /) cph) do kl = 2, Nr do i = 1, imt if (kbl(i).eq.kmtj(i) .and. Rib(i,kl).gt.Ricr) kbl(i) = kl end do end do CADJ store kbl = comlev1_kpp CADJ & , key=ikppkey, kind=isbyte, CADJ & shape = (/ (sNx+2*OLx)*(sNy+2*OLy) /) do i = 1, imt kl = kbl(i) c linearly interpolate to find hbl where Rib = Ricr if (kl.gt.1 .and. kl.lt.kmtj(i)) then tempVar1 = (Rib(i,kl)-Rib(i,kl-1)) hbl(i) = -zgrid(kl-1) + (zgrid(kl-1)-zgrid(kl)) * 1 (Ricr - Rib(i,kl-1)) / tempVar1 endif end do CADJ store hbl = comlev1_kpp CADJ & , key=ikppkey, kind=isbyte, CADJ & shape = (/ (sNx+2*OLx)*(sNy+2*OLy) /) c----------------------------------------------------------------------- c find stability and buoyancy forcing for boundary layer c----------------------------------------------------------------------- do i = 1, imt worka(i) = hbl(i) end do CADJ store worka = comlev1_kpp CADJ & , key=ikppkey, kind=isbyte, CADJ & shape = (/ (sNx+2*OLx)*(sNy+2*OLy) /) call SWFRAC( I imt, minusone, U worka, I myTime, myIter, myThid ) CADJ store worka = comlev1_kpp CADJ & , key=ikppkey, kind=isbyte, CADJ & shape = (/ (sNx+2*OLx)*(sNy+2*OLy) /) do i = 1, imt bfsfc(i) = bo(i) + bosol(i) * (1. - worka(i)) end do #ifdef ALLOW_SALT_PLUME IF ( useSALT_PLUME ) THEN do i = 1, imt worka(i) = hbl(i) enddo call SALT_PLUME_FRAC( I imt,minusone,SPDepth, U worka, I myTime, myIter, myThid ) do i = 1, imt bfsfc(i) = bfsfc(i) + boplume(i) * (1. - worka(i)) enddo ENDIF #endif /* ALLOW_SALT_PLUME */ CADJ store bfsfc = comlev1_kpp CADJ & , key=ikppkey, kind=isbyte, CADJ & shape = (/ (sNx+2*OLx)*(sNy+2*OLy) /) c-- ensure bfsfc is never 0 do i = 1, imt stable(i) = p5 + sign( p5, bfsfc(i) ) bfsfc(i) = sign(eins,bfsfc(i))*max(phepsi,abs(bfsfc(i))) end do cph( cph added stable to store list to avoid extensive recomp. CADJ store bfsfc, stable = comlev1_kpp CADJ & , key=ikppkey, kind=isbyte, CADJ & shape = (/ (sNx+2*OLx)*(sNy+2*OLy) /) cph) c----------------------------------------------------------------------- c check hbl limits for hekman or hmonob c ph: test for zero nominator c----------------------------------------------------------------------- IF ( LimitHblStable ) THEN do i = 1, imt if (bfsfc(i) .gt. 0.0) then hekman = cekman * ustar(i) / max(abs(Coriol(i)),phepsi) hmonob = cmonob * ustar(i)*ustar(i)*ustar(i) & / vonk / bfsfc(i) hlimit = stable(i) * min(hekman,hmonob) & + (stable(i)-1.) * zgrid(Nr) hbl(i) = min(hbl(i),hlimit) end if end do ENDIF CADJ store hbl = comlev1_kpp CADJ & , key=ikppkey, kind=isbyte, CADJ & shape = (/ (sNx+2*OLx)*(sNy+2*OLy) /) do i = 1, imt hbl(i) = max(hbl(i),minKPPhbl) kbl(i) = kmtj(i) end do CADJ store hbl = comlev1_kpp CADJ & , key=ikppkey, kind=isbyte, CADJ & shape = (/ (sNx+2*OLx)*(sNy+2*OLy) /) c----------------------------------------------------------------------- c find new kbl c----------------------------------------------------------------------- do kl = 2, Nr do i = 1, imt if ( kbl(i).eq.kmtj(i) .and. (-zgrid(kl)).gt.hbl(i) ) then kbl(i) = kl endif end do end do c----------------------------------------------------------------------- c find stability and buoyancy forcing for final hbl values c----------------------------------------------------------------------- do i = 1, imt worka(i) = hbl(i) end do CADJ store worka = comlev1_kpp CADJ & , key=ikppkey, kind=isbyte, CADJ & shape = (/ (sNx+2*OLx)*(sNy+2*OLy) /) call SWFRAC( I imt, minusone, U worka, I myTime, myIter, myThid ) CADJ store worka = comlev1_kpp CADJ & , key=ikppkey, kind=isbyte, CADJ & shape = (/ (sNx+2*OLx)*(sNy+2*OLy) /) do i = 1, imt bfsfc(i) = bo(i) + bosol(i) * (1. - worka(i)) end do #ifdef ALLOW_SALT_PLUME IF ( useSALT_PLUME ) THEN do i = 1, imt worka(i) = hbl(i) enddo call SALT_PLUME_FRAC( I imt,minusone,SPDepth, U worka, I myTime, myIter, myThid ) do i = 1, imt bfsfc(i) = bfsfc(i) + boplume(i) * (1. - worka(i)) enddo ENDIF #endif /* ALLOW_SALT_PLUME */ CADJ store bfsfc = comlev1_kpp CADJ & , key=ikppkey, kind=isbyte, CADJ & shape = (/ (sNx+2*OLx)*(sNy+2*OLy) /) c-- ensures bfsfc is never 0 do i = 1, imt stable(i) = p5 + sign( p5, bfsfc(i) ) bfsfc(i) = sign(eins,bfsfc(i))*max(phepsi,abs(bfsfc(i))) end do c----------------------------------------------------------------------- c determine caseA and caseB c----------------------------------------------------------------------- do i = 1, imt casea(i) = p5 + 1 sign(p5, -zgrid(kbl(i)) - p5*hwide(kbl(i)) - hbl(i)) end do #endif /* ALLOW_KPP */ return end c************************************************************************* subroutine wscale ( I sigma, hbl, ustar, bfsfc, O wm, ws, I myThid ) c compute turbulent velocity scales. c use a 2D-lookup table for wm and ws as functions of ustar and c zetahat (=vonk*sigma*hbl*bfsfc). c c note: the lookup table is only used for unstable conditions c (zehat.le.0), in the stable domain wm (=ws) gets computed c directly. c IMPLICIT NONE #include "SIZE.h" #include "KPP_PARAMS.h" c input c------ c sigma : normalized depth (d/hbl) c hbl : boundary layer depth (m) c ustar : surface friction velocity (m/s) c bfsfc : total surface buoyancy flux (m^2/s^3) c myThid : thread number for this instance of the routine integer myThid _RL sigma(imt) _RL hbl (imt) _RL ustar(imt) _RL bfsfc(imt) c output c-------- c wm, ws : turbulent velocity scales at sigma _RL wm(imt), ws(imt) #ifdef ALLOW_KPP c local c------ c zehat : = zeta * ustar**3 _RL zehat integer iz, izp1, ju, i, jup1 _RL udiff, zdiff, zfrac, ufrac, fzfrac, wam _RL wbm, was, wbs, u3, tempVar c----------------------------------------------------------------------- c use lookup table for zehat < zmax only; otherwise use c stable formulae c----------------------------------------------------------------------- do i = 1, imt zehat = vonk*sigma(i)*hbl(i)*bfsfc(i) if (zehat .le. zmax) then zdiff = zehat - zmin iz = int( zdiff / deltaz ) iz = min( iz, nni ) iz = max( iz, 0 ) izp1 = iz + 1 udiff = ustar(i) - umin ju = int( udiff / deltau ) ju = min( ju, nnj ) ju = max( ju, 0 ) jup1 = ju + 1 zfrac = zdiff / deltaz - float(iz) ufrac = udiff / deltau - float(ju) fzfrac= 1. - zfrac wam = fzfrac * wmt(iz,jup1) + zfrac * wmt(izp1,jup1) wbm = fzfrac * wmt(iz,ju ) + zfrac * wmt(izp1,ju ) wm(i) = (1.-ufrac) * wbm + ufrac * wam was = fzfrac * wst(iz,jup1) + zfrac * wst(izp1,jup1) wbs = fzfrac * wst(iz,ju ) + zfrac * wst(izp1,ju ) ws(i) = (1.-ufrac) * wbs + ufrac * was else u3 = ustar(i) * ustar(i) * ustar(i) tempVar = u3 + conc1 * zehat wm(i) = vonk * ustar(i) * u3 / tempVar ws(i) = wm(i) endif end do #endif /* ALLOW_KPP */ return end c************************************************************************* subroutine Ri_iwmix ( I kmtj, shsq, dbloc, dblocSm, I diffusKzS, diffusKzT, I ikppkey, O diffus, I myThid ) c compute interior viscosity diffusivity coefficients due c to shear instability (dependent on a local Richardson number), c to background internal wave activity, and c to static instability (local Richardson number < 0). IMPLICIT NONE #include "SIZE.h" #include "EEPARAMS.h" #include "PARAMS.h" #include "KPP_PARAMS.h" #ifdef ALLOW_AUTODIFF # include "tamc.h" #endif c input c kmtj (imt) number of vertical layers on this row c shsq (imt,Nr) (local velocity shear)^2 ((m/s)^2) c dbloc (imt,Nr) local delta buoyancy (m/s^2) c dblocSm(imt,Nr) horizontally smoothed dbloc (m/s^2) c diffusKzS(imt,Nr)- background vertical diffusivity for scalars (m^2/s) c diffusKzT(imt,Nr)- background vertical diffusivity for theta (m^2/s) c myThid :: My Thread Id. number integer kmtj (imt) _RL shsq (imt,Nr) _RL dbloc (imt,Nr) _RL dblocSm (imt,Nr) _RL diffusKzS(imt,Nr) _RL diffusKzT(imt,Nr) integer ikppkey integer myThid c output c diffus(imt,0:Nrp1,1) vertical viscosivity coefficient (m^2/s) c diffus(imt,0:Nrp1,2) vertical scalar diffusivity (m^2/s) c diffus(imt,0:Nrp1,3) vertical temperature diffusivity (m^2/s) _RL diffus(imt,0:Nrp1,3) #ifdef ALLOW_KPP c local variables c Rig local Richardson number c fRi, fcon function of Rig _RL Rig _RL fRi, fcon _RL ratio integer i, ki, kp1 _RL c1, c0 #ifdef ALLOW_KPP_VERTICALLY_SMOOTH integer mr CADJ INIT kpp_ri_tape_mr = common, 1 #endif c constants c1 = 1. _d 0 c0 = 0. _d 0 c----------------------------------------------------------------------- c compute interior gradient Ri at all interfaces ki=1,Nr, (not surface) c use diffus(*,*,1) as temporary storage of Ri to be smoothed c use diffus(*,*,2) as temporary storage for Brunt-Vaisala squared c set values at bottom and below to nearest value above bottom #ifdef ALLOW_AUTODIFF_TAMC C break data flow dependence on diffus diffus(1,1,1) = 0.0 do ki = 1, Nr do i = 1, imt diffus(i,ki,1) = 0. diffus(i,ki,2) = 0. diffus(i,ki,3) = 0. enddo enddo #endif do ki = 1, Nr do i = 1, imt if (kmtj(i) .LE. 1 ) then diffus(i,ki,1) = 0. diffus(i,ki,2) = 0. elseif (ki .GE. kmtj(i)) then diffus(i,ki,1) = diffus(i,ki-1,1) diffus(i,ki,2) = diffus(i,ki-1,2) else diffus(i,ki,1) = dblocSm(i,ki) * (zgrid(ki)-zgrid(ki+1)) & / max( Shsq(i,ki), phepsi ) diffus(i,ki,2) = dbloc(i,ki) / (zgrid(ki)-zgrid(ki+1)) endif end do end do CADJ store diffus = comlev1_kpp, key=ikppkey, kind=isbyte c----------------------------------------------------------------------- c vertically smooth Ri #ifdef ALLOW_KPP_VERTICALLY_SMOOTH do mr = 1, num_v_smooth_Ri CADJ store diffus(:,:,1) = kpp_ri_tape_mr CADJ & , key=mr, shape=(/ (sNx+2*OLx)*(sNy+2*OLy),Nr+2 /) call z121 ( U diffus(1,0,1), I myThid ) end do #endif c----------------------------------------------------------------------- c after smoothing loop do ki = 1, Nr do i = 1, imt c evaluate f of Brunt-Vaisala squared for convection, store in fcon Rig = max ( diffus(i,ki,2) , BVSQcon ) ratio = min ( (BVSQcon - Rig) / BVSQcon, c1 ) fcon = c1 - ratio * ratio fcon = fcon * fcon * fcon c evaluate f of smooth Ri for shear instability, store in fRi Rig = max ( diffus(i,ki,1), c0 ) ratio = min ( Rig / Riinfty , c1 ) fRi = c1 - ratio * ratio fRi = fRi * fRi * fRi c ---------------------------------------------------------------------- c evaluate diffusivities and viscosity c mixing due to internal waves, and shear and static instability kp1 = MIN(ki+1,Nr) #ifndef EXCLUDE_KPP_SHEAR_MIX if ( .NOT. inAdMode ) then diffus(i,ki,1) = viscArNr(1) + fcon*difmcon + fRi*difm0 diffus(i,ki,2) = diffusKzS(i,kp1)+fcon*difscon+fRi*difs0 diffus(i,ki,3) = diffusKzT(i,kp1)+fcon*diftcon+fRi*dift0 else diffus(i,ki,1) = viscArnr(1) diffus(i,ki,2) = diffusKzS(i,kp1) diffus(i,ki,3) = diffusKzT(i,kp1) endif #else diffus(i,ki,1) = viscArNr(1) diffus(i,ki,2) = diffusKzS(i,kp1) diffus(i,ki,3) = diffusKzT(i,kp1) #endif end do end do c ------------------------------------------------------------------------ c set surface values to 0.0 do i = 1, imt diffus(i,0,1) = c0 diffus(i,0,2) = c0 diffus(i,0,3) = c0 end do #endif /* ALLOW_KPP */ return end c************************************************************************* subroutine z121 ( U v, I myThid ) c Apply 121 smoothing in k to 2-d array V(i,k=1,Nr) c top (0) value is used as a dummy c bottom (Nrp1) value is set to input value from above. c Note that it is important to exclude from the smoothing any points c that are outside the range of the K(Ri) scheme, ie. >0.8, or <0.0. c Otherwise, there is interference with other physics, especially c penetrative convection. IMPLICIT NONE #include "SIZE.h" #include "KPP_PARAMS.h" c input/output c------------- c v : 2-D array to be smoothed in Nrp1 direction c myThid: thread number for this instance of the routine integer myThid _RL v(imt,0:Nrp1) #ifdef ALLOW_KPP c local _RL zwork, zflag _RL KRi_range(1:Nrp1) integer i, k, km1, kp1 _RL p0 , p25 , p5 , p2 parameter ( p0 = 0.0, p25 = 0.25, p5 = 0.5, p2 = 2.0 ) KRi_range(Nrp1) = p0 #ifdef ALLOW_AUTODIFF_TAMC C-- dummy assignment to end declaration part for TAMC i = 0 C-- HPF directive to help TAMC CHPF$ INDEPENDENT CADJ INIT z121tape = common, Nr #endif /* ALLOW_AUTODIFF_TAMC */ do i = 1, imt k = 1 CADJ STORE v(i,k) = z121tape v(i,Nrp1) = v(i,Nr) do k = 1, Nr KRi_range(k) = p5 + SIGN(p5,v(i,k)) KRi_range(k) = KRi_range(k) * & ( p5 + SIGN(p5,(Riinfty-v(i,k))) ) end do zwork = KRi_range(1) * v(i,1) v(i,1) = p2 * v(i,1) + & KRi_range(1) * KRi_range(2) * v(i,2) zflag = p2 + KRi_range(1) * KRi_range(2) v(i,1) = v(i,1) / zflag do k = 2, Nr CADJ STORE v(i,k), zwork = z121tape km1 = k - 1 kp1 = k + 1 zflag = v(i,k) v(i,k) = p2 * v(i,k) + & KRi_range(k) * KRi_range(kp1) * v(i,kp1) + & KRi_range(k) * zwork zwork = KRi_range(k) * zflag zflag = p2 + KRi_range(k)*(KRi_range(kp1)+KRi_range(km1)) v(i,k) = v(i,k) / zflag end do end do #endif /* ALLOW_KPP */ return end c************************************************************************* subroutine smooth_horiz ( I k, bi, bj, U fld, I myThid ) c Apply horizontal smoothing to global _RL 2-D array IMPLICIT NONE #include "SIZE.h" #include "GRID.h" #include "KPP_PARAMS.h" c input c bi, bj : array indices c k : vertical index used for masking c myThid : thread number for this instance of the routine INTEGER myThid integer k, bi, bj c input/output c fld : 2-D array to be smoothed _RL fld( 1-OLx:sNx+OLx, 1-OLy:sNy+OLy ) #ifdef ALLOW_KPP c local integer i, j, im1, ip1, jm1, jp1 _RL tempVar _RL fld_tmp( 1-OLx:sNx+OLx, 1-OLy:sNy+OLy ) integer imin , imax , jmin , jmax parameter(imin=2-OLx, imax=sNx+OLx-1, jmin=2-OLy, jmax=sNy+OLy-1) _RL p0 , p5 , p25 , p125 , p0625 parameter( p0=0.0, p5=0.5, p25=0.25, p125=0.125, p0625=0.0625 ) DO j = jmin, jmax jm1 = j-1 jp1 = j+1 DO i = imin, imax im1 = i-1 ip1 = i+1 tempVar = & p25 * maskC(i ,j ,k,bi,bj) + & p125 * ( maskC(im1,j ,k,bi,bj) + & maskC(ip1,j ,k,bi,bj) + & maskC(i ,jm1,k,bi,bj) + & maskC(i ,jp1,k,bi,bj) ) + & p0625 * ( maskC(im1,jm1,k,bi,bj) + & maskC(im1,jp1,k,bi,bj) + & maskC(ip1,jm1,k,bi,bj) + & maskC(ip1,jp1,k,bi,bj) ) IF ( tempVar .GE. p25 ) THEN fld_tmp(i,j) = ( & p25 * fld(i ,j )*maskC(i ,j ,k,bi,bj) + & p125 *(fld(im1,j )*maskC(im1,j ,k,bi,bj) + & fld(ip1,j )*maskC(ip1,j ,k,bi,bj) + & fld(i ,jm1)*maskC(i ,jm1,k,bi,bj) + & fld(i ,jp1)*maskC(i ,jp1,k,bi,bj))+ & p0625*(fld(im1,jm1)*maskC(im1,jm1,k,bi,bj) + & fld(im1,jp1)*maskC(im1,jp1,k,bi,bj) + & fld(ip1,jm1)*maskC(ip1,jm1,k,bi,bj) + & fld(ip1,jp1)*maskC(ip1,jp1,k,bi,bj))) & / tempVar ELSE fld_tmp(i,j) = fld(i,j) ENDIF ENDDO ENDDO c transfer smoothed field to output array DO j = jmin, jmax DO i = imin, imax fld(i,j) = fld_tmp(i,j) ENDDO ENDDO #endif /* ALLOW_KPP */ return end c************************************************************************* subroutine blmix ( I ustar, bfsfc, hbl, stable, casea, diffus, kbl O , dkm1, blmc, ghat, sigma, ikppkey I , myThid ) c mixing coefficients within boundary layer depend on surface c forcing and the magnitude and gradient of interior mixing below c the boundary layer ("matching"). c c caution: if mixing bottoms out at hbl = -zgrid(Nr) then c fictitious layer at Nrp1 is needed with small but finite width c hwide(Nrp1) (eg. epsln = 1.e-20). c IMPLICIT NONE #include "SIZE.h" #include "KPP_PARAMS.h" #ifdef ALLOW_AUTODIFF # include "tamc.h" #endif c input c ustar (imt) surface friction velocity (m/s) c bfsfc (imt) surface buoyancy forcing (m^2/s^3) c hbl (imt) boundary layer depth (m) c stable(imt) = 1 in stable forcing c casea (imt) = 1 in case A c diffus(imt,0:Nrp1,mdiff) vertical diffusivities (m^2/s) c kbl (imt) -1 of first grid level below hbl c myThid thread number for this instance of the routine integer myThid _RL ustar (imt) _RL bfsfc (imt) _RL hbl (imt) _RL stable(imt) _RL casea (imt) _RL diffus(imt,0:Nrp1,mdiff) integer kbl(imt) c output c dkm1 (imt,mdiff) boundary layer difs at kbl-1 level c blmc (imt,Nr,mdiff) boundary layer mixing coefficients (m^2/s) c ghat (imt,Nr) nonlocal scalar transport c sigma(imt) normalized depth (d / hbl) _RL dkm1 (imt,mdiff) _RL blmc (imt,Nr,mdiff) _RL ghat (imt,Nr) _RL sigma(imt) integer ikppkey #ifdef ALLOW_KPP c local c gat1*(imt) shape function at sigma = 1 c dat1*(imt) derivative of shape function at sigma = 1 c ws(imt), wm(imt) turbulent velocity scales (m/s) _RL gat1m(imt), gat1s(imt), gat1t(imt) _RL dat1m(imt), dat1s(imt), dat1t(imt) _RL ws(imt), wm(imt) integer i, kn, ki _RL R, dvdzup, dvdzdn, viscp _RL difsp, diftp, visch, difsh, difth _RL f1, sig, a1, a2, a3, delhat _RL Gm, Gs, Gt _RL tempVar _RL p0 , eins parameter (p0=0.0, eins=1.0) #ifdef ALLOW_AUTODIFF_TAMC integer kkppkey #endif c----------------------------------------------------------------------- c compute velocity scales at hbl c----------------------------------------------------------------------- do i = 1, imt sigma(i) = stable(i) * 1.0 + (1. - stable(i)) * epsilon end do CADJ STORE sigma = comlev1_kpp, key=ikppkey, kind=isbyte call wscale ( I sigma, hbl, ustar, bfsfc, O wm, ws, myThid ) CADJ STORE wm = comlev1_kpp, key=ikppkey, kind=isbyte CADJ STORE ws = comlev1_kpp, key=ikppkey, kind=isbyte do i = 1, imt wm(i) = sign(eins,wm(i))*max(phepsi,abs(wm(i))) ws(i) = sign(eins,ws(i))*max(phepsi,abs(ws(i))) end do CADJ STORE wm = comlev1_kpp, key=ikppkey, kind=isbyte CADJ STORE ws = comlev1_kpp, key=ikppkey, kind=isbyte do i = 1, imt kn = int(caseA(i)+phepsi) *(kbl(i) -1) + $ (1 - int(caseA(i)+phepsi)) * kbl(i) c----------------------------------------------------------------------- c find the interior viscosities and derivatives at hbl(i) c----------------------------------------------------------------------- delhat = 0.5*hwide(kn) - zgrid(kn) - hbl(i) R = 1.0 - delhat / hwide(kn) dvdzup = (diffus(i,kn-1,1) - diffus(i,kn ,1)) / hwide(kn) dvdzdn = (diffus(i,kn ,1) - diffus(i,kn+1,1)) / hwide(kn+1) viscp = 0.5 * ( (1.-R) * (dvdzup + abs(dvdzup)) + 1 R * (dvdzdn + abs(dvdzdn)) ) dvdzup = (diffus(i,kn-1,2) - diffus(i,kn ,2)) / hwide(kn) dvdzdn = (diffus(i,kn ,2) - diffus(i,kn+1,2)) / hwide(kn+1) difsp = 0.5 * ( (1.-R) * (dvdzup + abs(dvdzup)) + 1 R * (dvdzdn + abs(dvdzdn)) ) dvdzup = (diffus(i,kn-1,3) - diffus(i,kn ,3)) / hwide(kn) dvdzdn = (diffus(i,kn ,3) - diffus(i,kn+1,3)) / hwide(kn+1) diftp = 0.5 * ( (1.-R) * (dvdzup + abs(dvdzup)) + 1 R * (dvdzdn + abs(dvdzdn)) ) visch = diffus(i,kn,1) + viscp * delhat difsh = diffus(i,kn,2) + difsp * delhat difth = diffus(i,kn,3) + diftp * delhat f1 = stable(i) * conc1 * bfsfc(i) / & max(ustar(i)**4,phepsi) gat1m(i) = visch / hbl(i) / wm(i) dat1m(i) = -viscp / wm(i) + f1 * visch gat1s(i) = difsh / hbl(i) / ws(i) dat1s(i) = -difsp / ws(i) + f1 * difsh gat1t(i) = difth / hbl(i) / ws(i) dat1t(i) = -diftp / ws(i) + f1 * difth end do #ifdef KPP_AUTODIFF_EXCESSIVE_STORE CADJ STORE gat1m = comlev1_kpp, key=ikppkey, kind=isbyte CADJ STORE gat1s = comlev1_kpp, key=ikppkey, kind=isbyte CADJ STORE gat1t = comlev1_kpp, key=ikppkey, kind=isbyte CADJ STORE dat1m = comlev1_kpp, key=ikppkey, kind=isbyte CADJ STORE dat1s = comlev1_kpp, key=ikppkey, kind=isbyte CADJ STORE dat1t = comlev1_kpp, key=ikppkey, kind=isbyte #endif do i = 1, imt dat1m(i) = min(dat1m(i),p0) dat1s(i) = min(dat1s(i),p0) dat1t(i) = min(dat1t(i),p0) end do #ifdef KPP_AUTODIFF_EXCESSIVE_STORE CADJ STORE dat1m = comlev1_kpp, key=ikppkey, kind=isbyte CADJ STORE dat1s = comlev1_kpp, key=ikppkey, kind=isbyte CADJ STORE dat1t = comlev1_kpp, key=ikppkey, kind=isbyte #endif do ki = 1, Nr #ifdef ALLOW_AUTODIFF_TAMC kkppkey = (ikppkey-1)*Nr + ki #endif c----------------------------------------------------------------------- c compute turbulent velocity scales on the interfaces c----------------------------------------------------------------------- do i = 1, imt sig = (-zgrid(ki) + 0.5 * hwide(ki)) / hbl(i) sigma(i) = stable(i)*sig + (1.-stable(i))*min(sig,epsilon) end do #ifdef KPP_AUTODIFF_EXCESSIVE_STORE CADJ STORE wm = comlev1_kpp_k, key = kkppkey CADJ STORE ws = comlev1_kpp_k, key = kkppkey #endif CADJ STORE sigma = comlev1_kpp_k, key = kkppkey call wscale ( I sigma, hbl, ustar, bfsfc, O wm, ws, myThid ) CADJ STORE wm = comlev1_kpp_k, key = kkppkey CADJ STORE ws = comlev1_kpp_k, key = kkppkey c----------------------------------------------------------------------- c compute the dimensionless shape functions at the interfaces c----------------------------------------------------------------------- do i = 1, imt sig = (-zgrid(ki) + 0.5 * hwide(ki)) / hbl(i) a1 = sig - 2. a2 = 3. - 2. * sig a3 = sig - 1. Gm = a1 + a2 * gat1m(i) + a3 * dat1m(i) Gs = a1 + a2 * gat1s(i) + a3 * dat1s(i) Gt = a1 + a2 * gat1t(i) + a3 * dat1t(i) c----------------------------------------------------------------------- c compute boundary layer diffusivities at the interfaces c----------------------------------------------------------------------- blmc(i,ki,1) = hbl(i) * wm(i) * sig * (1. + sig * Gm) blmc(i,ki,2) = hbl(i) * ws(i) * sig * (1. + sig * Gs) blmc(i,ki,3) = hbl(i) * ws(i) * sig * (1. + sig * Gt) c----------------------------------------------------------------------- c nonlocal transport term = ghat * o c----------------------------------------------------------------------- tempVar = ws(i) * hbl(i) ghat(i,ki) = (1.-stable(i)) * cg / max(phepsi,tempVar) end do end do c----------------------------------------------------------------------- c find diffusivities at kbl-1 grid level c----------------------------------------------------------------------- do i = 1, imt sig = -zgrid(kbl(i)-1) / hbl(i) sigma(i) = stable(i) * sig & + (1. - stable(i)) * min(sig,epsilon) end do #ifdef KPP_AUTODIFF_EXCESSIVE_STORE CADJ STORE wm = comlev1_kpp, key=ikppkey, kind=isbyte CADJ STORE ws = comlev1_kpp, key=ikppkey, kind=isbyte #endif CADJ STORE sigma = comlev1_kpp, key=ikppkey, kind=isbyte call wscale ( I sigma, hbl, ustar, bfsfc, O wm, ws, myThid ) CADJ STORE wm = comlev1_kpp, key=ikppkey, kind=isbyte CADJ STORE ws = comlev1_kpp, key=ikppkey, kind=isbyte do i = 1, imt sig = -zgrid(kbl(i)-1) / hbl(i) a1 = sig - 2. a2 = 3. - 2. * sig a3 = sig - 1. Gm = a1 + a2 * gat1m(i) + a3 * dat1m(i) Gs = a1 + a2 * gat1s(i) + a3 * dat1s(i) Gt = a1 + a2 * gat1t(i) + a3 * dat1t(i) dkm1(i,1) = hbl(i) * wm(i) * sig * (1. + sig * Gm) dkm1(i,2) = hbl(i) * ws(i) * sig * (1. + sig * Gs) dkm1(i,3) = hbl(i) * ws(i) * sig * (1. + sig * Gt) end do #endif /* ALLOW_KPP */ return end c************************************************************************* subroutine enhance ( I dkm1, hbl, kbl, diffus, casea U , ghat O , blmc & , myThid ) c enhance the diffusivity at the kbl-.5 interface IMPLICIT NONE #include "SIZE.h" #include "KPP_PARAMS.h" c input c dkm1(imt,mdiff) bl diffusivity at kbl-1 grid level c hbl(imt) boundary layer depth (m) c kbl(imt) grid above hbl c diffus(imt,0:Nrp1,mdiff) vertical diffusivities (m^2/s) c casea(imt) = 1 in caseA, = 0 in case B c myThid thread number for this instance of the routine integer myThid _RL dkm1 (imt,mdiff) _RL hbl (imt) integer kbl (imt) _RL diffus(imt,0:Nrp1,mdiff) _RL casea (imt) c input/output c nonlocal transport, modified ghat at kbl(i)-1 interface (s/m**2) _RL ghat (imt,Nr) c output c enhanced bound. layer mixing coeff. _RL blmc (imt,Nr,mdiff) #ifdef ALLOW_KPP c local c fraction hbl lies beteen zgrid neighbors _RL delta integer ki, i, md _RL dkmp5, dstar do i = 1, imt ki = kbl(i)-1 if ((ki .ge. 1) .and. (ki .lt. Nr)) then delta = (hbl(i) + zgrid(ki)) / (zgrid(ki) - zgrid(ki+1)) do md = 1, mdiff dkmp5 = casea(i) * diffus(i,ki,md) + 1 (1.- casea(i)) * blmc (i,ki,md) dstar = (1.- delta)**2 * dkm1(i,md) & + delta**2 * dkmp5 blmc(i,ki,md) = (1.- delta)*diffus(i,ki,md) & + delta*dstar end do ghat(i,ki) = (1.- casea(i)) * ghat(i,ki) endif end do #endif /* ALLOW_KPP */ return end c************************************************************************* SUBROUTINE STATEKPP ( O RHO1, DBLOC, DBSFC, TTALPHA, SSBETA, I ikppkey, bi, bj, myThid ) c c----------------------------------------------------------------------- c "statekpp" computes all necessary input arrays c for the kpp mixing scheme c c input: c bi, bj = array indices on which to apply calculations c c output: c rho1 = potential density of surface layer (kg/m^3) c dbloc = local buoyancy gradient at Nr interfaces c g/rho{k+1,k+1} * [ drho{k,k+1}-drho{k+1,k+1} ] (m/s^2) c dbsfc = buoyancy difference with respect to the surface c g * [ drho{1,k}/rho{1,k} - drho{k,k}/rho{k,k} ] (m/s^2) c ttalpha= thermal expansion coefficient without 1/rho factor c d(rho) / d(potential temperature) (kg/m^3/C) c ssbeta = salt expansion coefficient without 1/rho factor c d(rho) / d(salinity) (kg/m^3/PSU) c c see also subroutines find_rho.F find_alpha.F find_beta.F c c written by: jan morzel, feb. 10, 1995 (converted from "sigma" version) c modified by: d. menemenlis, june 1998 : for use with MIT GCM UV c c----------------------------------------------------------------------- IMPLICIT NONE #include "SIZE.h" #include "EEPARAMS.h" #include "PARAMS.h" #include "KPP_PARAMS.h" #include "DYNVARS.h" #include "GRID.h" #ifdef ALLOW_AUTODIFF # include "tamc.h" #endif c-------------- Routine arguments ----------------------------------------- INTEGER bi, bj, myThid _RL RHO1 ( 1-OLx:sNx+OLx, 1-OLy:sNy+OLy ) _RL DBLOC ( 1-OLx:sNx+OLx, 1-OLy:sNy+OLy, Nr ) _RL DBSFC ( 1-OLx:sNx+OLx, 1-OLy:sNy+OLy, Nr ) _RL TTALPHA( 1-OLx:sNx+OLx, 1-OLy:sNy+OLy, Nrp1 ) _RL SSBETA ( 1-OLx:sNx+OLx, 1-OLy:sNy+OLy, Nrp1 ) #ifdef ALLOW_KPP c-------------------------------------------------------------------------- c c local arrays: c c rhok - density of t(k ) & s(k ) at depth k c rhokm1 - density of t(k-1) & s(k-1) at depth k c rho1k - density of t(1 ) & s(1 ) at depth k c work1,2,3 - work arrays for holding horizontal slabs _RL RHOK (1-OLx:sNx+OLx,1-OLy:sNy+OLy) _RL RHOKM1(1-OLx:sNx+OLx,1-OLy:sNy+OLy) _RL RHO1K (1-OLx:sNx+OLx,1-OLy:sNy+OLy) _RL WORK1 (1-OLx:sNx+OLx,1-OLy:sNy+OLy) _RL WORK2 (1-OLx:sNx+OLx,1-OLy:sNy+OLy) _RL WORK3 (1-OLx:sNx+OLx,1-OLy:sNy+OLy) INTEGER I, J, K INTEGER ikppkey, kkppkey c calculate density, alpha, beta in surface layer, and set dbsfc to zero kkppkey = (ikppkey-1)*Nr + 1 #ifdef KPP_AUTODIFF_EXCESSIVE_STORE CADJ STORE theta(:,:,1,bi,bj) = comlev1_kpp_k, CADJ & key=kkppkey, kind=isbyte CADJ STORE salt (:,:,1,bi,bj) = comlev1_kpp_k, CADJ & key=kkppkey, kind=isbyte #endif /* KPP_AUTODIFF_EXCESSIVE_STORE */ CALL FIND_RHO_2D( I 1-OLx, sNx+OLx, 1-OLy, sNy+OLy, 1, I theta(1-OLx,1-OLy,1,bi,bj), salt(1-OLx,1-OLy,1,bi,bj), O WORK1, I 1, bi, bj, myThid ) #ifdef KPP_AUTODIFF_EXCESSIVE_STORE CADJ STORE theta(:,:,1,bi,bj) = comlev1_kpp_k, CADJ & key=kkppkey, kind=isbyte CADJ STORE salt (:,:,1,bi,bj) = comlev1_kpp_k, CADJ & key=kkppkey, kind=isbyte #endif /* KPP_AUTODIFF_EXCESSIVE_STORE */ call FIND_ALPHA( I bi, bj, 1-OLx, sNx+OLx, 1-OLy, sNy+OLy, 1, 1, O WORK2, myThid ) call FIND_BETA( I bi, bj, 1-OLx, sNx+OLx, 1-OLy, sNy+OLy, 1, 1, O WORK3, myThid ) DO J = 1-OLy, sNy+OLy DO I = 1-OLx, sNx+OLx RHO1(I,J) = WORK1(I,J) + rhoConst TTALPHA(I,J,1) = WORK2(I,J) SSBETA(I,J,1) = WORK3(I,J) DBSFC(I,J,1) = 0. END DO END DO c calculate alpha, beta, and gradients in interior layers CHPF$ INDEPENDENT, NEW (RHOK,RHOKM1,RHO1K,WORK1,WORK2) DO K = 2, Nr kkppkey = (ikppkey-1)*Nr + k #ifdef KPP_AUTODIFF_EXCESSIVE_STORE CADJ STORE theta(:,:,k,bi,bj) = comlev1_kpp_k, CADJ & key=kkppkey, kind=isbyte CADJ STORE salt (:,:,k,bi,bj) = comlev1_kpp_k, CADJ & key=kkppkey, kind=isbyte #endif /* KPP_AUTODIFF_EXCESSIVE_STORE */ CALL FIND_RHO_2D( I 1-OLx, sNx+OLx, 1-OLy, sNy+OLy, k, I theta(1-OLx,1-OLy,k,bi,bj), salt(1-OLx,1-OLy,k,bi,bj), O RHOK, I k, bi, bj, myThid ) #ifdef KPP_AUTODIFF_EXCESSIVE_STORE CADJ STORE theta(:,:,k-1,bi,bj) = comlev1_kpp_k, CADJ & key=kkppkey, kind=isbyte CADJ STORE salt (:,:,k-1,bi,bj) = comlev1_kpp_k, CADJ & key=kkppkey, kind=isbyte #endif /* KPP_AUTODIFF_EXCESSIVE_STORE */ CALL FIND_RHO_2D( I 1-OLx, sNx+OLx, 1-OLy, sNy+OLy, k, I theta(1-OLx,1-OLy,k-1,bi,bj),salt(1-OLx,1-OLy,k-1,bi,bj), O RHOKM1, I k-1, bi, bj, myThid ) #ifdef KPP_AUTODIFF_EXCESSIVE_STORE CADJ STORE theta(:,:,1,bi,bj) = comlev1_kpp_k, CADJ & key=kkppkey, kind=isbyte CADJ STORE salt (:,:,1,bi,bj) = comlev1_kpp_k, CADJ & key=kkppkey, kind=isbyte #endif /* KPP_AUTODIFF_EXCESSIVE_STORE */ CALL FIND_RHO_2D( I 1-OLx, sNx+OLx, 1-OLy, sNy+OLy, k, I theta(1-OLx,1-OLy,1,bi,bj), salt(1-OLx,1-OLy,1,bi,bj), O RHO1K, I 1, bi, bj, myThid ) #ifdef KPP_AUTODIFF_EXCESSIVE_STORE CADJ STORE rhok (:,:) = comlev1_kpp_k, CADJ & key=kkppkey, kind=isbyte CADJ STORE rhokm1(:,:) = comlev1_kpp_k, CADJ & key=kkppkey, kind=isbyte CADJ STORE rho1k (:,:) = comlev1_kpp_k, CADJ & key=kkppkey, kind=isbyte #endif /* KPP_AUTODIFF_EXCESSIVE_STORE */ call FIND_ALPHA( I bi, bj, 1-OLx, sNx+OLx, 1-OLy, sNy+OLy, K, K, O WORK1, myThid ) call FIND_BETA( I bi, bj, 1-OLx, sNx+OLx, 1-OLy, sNy+OLy, K, K, O WORK2, myThid ) DO J = 1-OLy, sNy+OLy DO I = 1-OLx, sNx+OLx TTALPHA(I,J,K) = WORK1 (I,J) SSBETA(I,J,K) = WORK2 (I,J) DBLOC(I,J,K-1) = gravity * (RHOK(I,J) - RHOKM1(I,J)) / & (RHOK(I,J) + rhoConst) DBSFC(I,J,K) = gravity * (RHOK(I,J) - RHO1K (I,J)) / & (RHOK(I,J) + rhoConst) END DO END DO END DO c compute arrays for K = Nrp1 DO J = 1-OLy, sNy+OLy DO I = 1-OLx, sNx+OLx TTALPHA(I,J,Nrp1) = TTALPHA(I,J,Nr) SSBETA(I,J,Nrp1) = SSBETA(I,J,Nr) DBLOC(I,J,Nr) = 0. END DO END DO #ifdef ALLOW_DIAGNOSTICS IF ( useDiagnostics ) THEN CALL DIAGNOSTICS_FILL(DBSFC ,'KPPdbsfc',0,Nr,2,bi,bj,myThid) CALL DIAGNOSTICS_FILL(DBLOC ,'KPPdbloc',0,Nr,2,bi,bj,myThid) ENDIF #endif /* ALLOW_DIAGNOSTICS */ #endif /* ALLOW_KPP */ RETURN END c************************************************************************* SUBROUTINE KPP_DOUBLEDIFF ( I TTALPHA, SSBETA, U kappaRT, U kappaRS, I ikppkey, imin, imax, jmin, jmax, bi, bj, myThid ) c c----------------------------------------------------------------------- c "KPP_DOUBLEDIFF" adds the double diffusive contributions C as Rrho-dependent parameterizations to kappaRT and kappaRS c c input: c bi, bj = array indices on which to apply calculations c imin, imax, jmin, jmax = array boundaries c ikppkey = key for TAMC/TAF automatic differentiation c myThid = thread id c c ttalpha= thermal expansion coefficient without 1/rho factor c d(rho) / d(potential temperature) (kg/m^3/C) c ssbeta = salt expansion coefficient without 1/rho factor c d(rho) / d(salinity) (kg/m^3/PSU) c output: updated c kappaRT/S :: background diffusivities for temperature and salinity c c written by: martin losch, sept. 15, 2009 c c----------------------------------------------------------------------- IMPLICIT NONE #include "SIZE.h" #include "EEPARAMS.h" #include "PARAMS.h" #include "KPP_PARAMS.h" #include "DYNVARS.h" #include "GRID.h" #ifdef ALLOW_AUTODIFF # include "tamc.h" #endif c-------------- Routine arguments ----------------------------------------- INTEGER ikppkey, imin, imax, jmin, jmax, bi, bj, myThid _RL TTALPHA( 1-OLx:sNx+OLx, 1-OLy:sNy+OLy, Nrp1 ) _RL SSBETA ( 1-OLx:sNx+OLx, 1-OLy:sNy+OLy, Nrp1 ) _RL KappaRT( 1-Olx:sNx+Olx, 1-Oly:sNy+Oly, Nr ) _RL KappaRS( 1-Olx:sNx+Olx, 1-Oly:sNy+Oly, Nr ) #ifdef ALLOW_KPP C-------------------------------------------------------------------------- C C local variables C I,J,K :: loop indices C kkppkey :: key for TAMC/TAF automatic differentiation C INTEGER I, J, K INTEGER kkppkey C alphaDT :: d\rho/d\theta * d\theta C betaDS :: d\rho/dsalt * dsalt C Rrho :: "density ratio" R_{\rho} = \alpha dT/dz / \beta dS/dz C nuddt/s :: double diffusive diffusivities C numol :: molecular diffusivity C rFac :: abbreviation for 1/(R_{\rho0}-1) _RL alphaDT ( 1-OLx:sNx+OLx, 1-OLy:sNy+OLy ) _RL betaDS ( 1-OLx:sNx+OLx, 1-OLy:sNy+OLy ) _RL nuddt ( 1-OLx:sNx+OLx, 1-OLy:sNy+OLy ) _RL nudds ( 1-OLx:sNx+OLx, 1-OLy:sNy+OLy ) _RL Rrho _RL numol, rFac, nutmp INTEGER Km1 C set some constants here numol = 1.5 _d -06 rFac = 1. _d 0 / (Rrho0 - 1. _d 0 ) C kkppkey = (ikppkey-1)*Nr + 1 CML#ifdef KPP_AUTODIFF_EXCESSIVE_STORE CMLCADJ STORE theta(:,:,1,bi,bj) = comlev1_kpp_k, CMLCADJ & key=kkppkey, kind=isbyte CMLCADJ STORE salt (:,:,1,bi,bj) = comlev1_kpp_k, CMLCADJ & key=kkppkey, kind=isbyte CML#endif /* KPP_AUTODIFF_EXCESSIVE_STORE */ DO K = 1, Nr Km1 = MAX(K-1,1) DO J = 1-Oly, sNy+Oly DO I = 1-Olx, sNx+Olx alphaDT(I,J) = ( theta(I,J,Km1,bi,bj)-theta(I,J,K,bi,bj) ) & * 0.5 _d 0 * ABS( TTALPHA(I,J,Km1) + TTALPHA(I,J,K) ) betaDS(I,J) = ( salt(I,J,Km1,bi,bj)-salt(I,J,K,bi,bj) ) & * 0.5 _d 0 * ( SSBETA(I,J,Km1) + SSBETA(I,J,K) ) nuddt(I,J) = 0. _d 0 nudds(I,J) = 0. _d 0 ENDDO ENDDO IF ( K .GT. 1 ) THEN DO J = jMin, jMax DO I = iMin, iMax Rrho = 0. _d 0 C Now we have many different cases C a. alphaDT > 0 and betaDS > 0 => salt fingering C (salinity destabilizes) IF ( alphaDT(I,J) .GT. betaDS(I,J) & .AND. betaDS(I,J) .GT. 0. _d 0 ) THEN Rrho = MIN( alphaDT(I,J)/betaDS(I,J), Rrho0 ) C Large et al. 1994, eq. 31a C nudds(I,J) = dsfmax * ( 1. _d 0 - (Rrho - 1. _d 0) * rFac )**3 nutmp = ( 1. _d 0 - (Rrho - 1. _d 0) * rFac ) nudds(I,J) = dsfmax * nutmp * nutmp * nutmp C Large et al. 1994, eq. 31c nuddt(I,J) = 0.7 _d 0 * nudds(I,J) ELSEIF ( alphaDT(I,J) .LT. 0. _d 0 & .AND. betaDS(I,J) .LT. 0. _d 0 & .AND.alphaDT(I,J) .GT. betaDS(I,J) ) THEN C b. alphaDT < 0 and betaDS < 0 => semi-convection, diffusive convection C (temperature destabilizes) C for Rrho >= 1 the water column is statically unstable and we never C reach this point Rrho = alphaDT(I,J)/betaDS(I,J) C Large et al. 1994, eq. 32 nuddt(I,J) = numol * 0.909 _d 0 & * exp ( 4.6 _d 0 * exp ( & - 5.4 _d 0 * ( 1. _d 0/Rrho - 1. _d 0 ) ) ) CMLC or CMLC Large et al. 1994, eq. 33 CML nuddt(I,J) = numol * 8.7 _d 0 * Rrho**1.1 C Large et al. 1994, eqs. 34 nudds(I,J) = nuddt(I,J) * MAX( 0.15 _d 0 * Rrho, & 1.85 _d 0 * Rrho - 0.85 _d 0 ) ELSE C Do nothing, because in this case the water colume is unstable C => double diffusive processes are negligible and mixing due C to shear instability will dominate ENDIF ENDDO ENDDO C ENDIF ( K .GT. 1 ) ENDIF C DO J = 1-Oly, sNy+Oly DO I = 1-Olx, sNx+Olx kappaRT(I,J,K) = kappaRT(I,J,K) + nuddt(I,J) kappaRS(I,J,K) = kappaRS(I,J,K) + nudds(I,J) ENDDO ENDDO #ifdef ALLOW_DIAGNOSTICS IF ( useDiagnostics ) THEN CALL DIAGNOSTICS_FILL(nuddt,'KPPnuddt',k,1,2,bi,bj,myThid) CALL DIAGNOSTICS_FILL(nudds,'KPPnudds',k,1,2,bi,bj,myThid) ENDIF #endif /* ALLOW_DIAGNOSTICS */ C end of K-loop ENDDO #endif /* ALLOW_KPP */ RETURN END