--- MITgcm/model/inc/PARAMS.h 2001/04/03 02:39:18 1.49.2.2 +++ MITgcm/model/inc/PARAMS.h 2004/07/16 01:18:47 1.120 @@ -1,14 +1,21 @@ -C $Header: /home/ubuntu/mnt/e9_copy/MITgcm/model/inc/PARAMS.h,v 1.49.2.2 2001/04/03 02:39:18 adcroft Exp $ +C $Header: /home/ubuntu/mnt/e9_copy/MITgcm/model/inc/PARAMS.h,v 1.120 2004/07/16 01:18:47 jmc Exp $ C $Name: $ C -C /==========================================================\ -C | PARAMS.h | -C | o Header file defining model "parameters". | -C |==========================================================| -C | The values from the model standard input file are | -C | stored into the variables held here. Notes describing | -C | the parameters can also be found here. | -C \==========================================================/ +CBOP +C !ROUTINE: PARAMS.h +C !INTERFACE: +C include PARAMS.h +C !DESCRIPTION: \bv +C *==========================================================* +C | PARAMS.h +C | o Header file defining model "parameters". +C *==========================================================* +C | The values from the model standard input file are +C | stored into the variables held here. Notes describing +C | the parameters can also be found here. +C *==========================================================* +C \ev +CEOP C Macros for special grid options #include "PARAMS_MACROS.h" @@ -21,13 +28,13 @@ PARAMETER ( deg2rad = 2.D0*PI/360.D0 ) C Symbolic values -C precXXXX - Used to indicate what precision to use for +C precXXXX :: Used to indicate what precision to use for C dumping model state. INTEGER precFloat32 PARAMETER ( precFloat32 = 32 ) INTEGER precFloat64 PARAMETER ( precFloat64 = 64 ) -C UNSET_xxx - Used to indicate variables that have not been given a value +C UNSET_xxx :: Used to indicate variables that have not been given a value Real*8 UNSET_FLOAT8 PARAMETER ( UNSET_FLOAT8 = 1.234567D5 ) Real*4 UNSET_FLOAT4 @@ -44,31 +51,43 @@ PARAMETER ( maxNoChkptLev = 2 ) C-- COMMON /PARM_C/ Character valued parameters used by the model. -C checkPtSuff - List of checkpoint file suffices -C bathyFile - File containing bathymetry. If not defined bathymetry +C checkPtSuff :: List of checkpoint file suffices +C bathyFile :: File containing bathymetry. If not defined bathymetry C is taken from inline function. -C hydrogThetaFile - File containing initial hydrographic data for potential +C topoFile :: File containing the topography of the surface (unit=m) +C (mainly used for the atmosphere = ground height). +C hydrogThetaFile :: File containing initial hydrographic data for potential C temperature. -C hydrogSaltFile - File containing initial hydrographic data for salinity. -C zonalWindFile - File containing zonal wind data -C meridWindFile - File containing meridional wind data -C thetaClimFile - File containing theta climataology used +C hydrogSaltFile :: File containing initial hydrographic data for salinity. +C zonalWindFile :: File containing zonal wind data +C meridWindFile :: File containing meridional wind data +C thetaClimFile :: File containing theta climataology used C in relaxation term -lambda(theta-theta*) -C saltClimFile - File containing salt climataology used +C saltClimFile :: File containing salt climataology used C in relaxation term -lambda(salt-salt*) -C surfQfile - File containing surface heat flux -C surfQswfile - File containing surface shortwave radiation -C EmPmRfile - File containing surface fresh water flux -C buoyancyRelation - Flag used to indicate which relation to use to +C surfQfile :: File containing surface heat flux, excluding SW +C (old version, kept for backward compatibility) +C surfQnetFile :: File containing surface net heat flux +C surfQswFile :: File containing surface shortwave radiation +C dQdTfile :: File containing thermal relaxation coefficient +C EmPmRfile :: File containing surface fresh water flux +C pLoadFile :: File containing pressure loading +C buoyancyRelation :: Flag used to indicate which relation to use to C get buoyancy. +C eosType :: choose the equation of state: +C LINEAR, POLY3, UNESCO, JMD95Z, JMD95P, MDJWF, IDEALGAS COMMON /PARM_C/ checkPtSuff, - & bathyFile, hydrogThetaFile, hydrogSaltFile, + & bathyFile, topoFile, + & hydrogThetaFile, hydrogSaltFile, & zonalWindFile, meridWindFile, thetaClimFile, & saltClimFile, buoyancyRelation, - & EmPmRfile, surfQfile, surfQswfile, - & uVelInitFile, vVelInitFile, pSurfInitFile + & EmPmRfile, surfQfile, surfQnetFile, surfQswFile, + & uVelInitFile, vVelInitFile, pSurfInitFile, + & dQdTfile, ploadFile, + & eosType, pickupSuff, + & mdsioLocalDir CHARACTER*(5) checkPtSuff(maxNoChkptLev) - CHARACTER*(MAX_LEN_FNAM) bathyFile + CHARACTER*(MAX_LEN_FNAM) bathyFile, topoFile CHARACTER*(MAX_LEN_FNAM) hydrogThetaFile CHARACTER*(MAX_LEN_FNAM) hydrogSaltFile CHARACTER*(MAX_LEN_FNAM) zonalWindFile @@ -76,49 +95,65 @@ CHARACTER*(MAX_LEN_FNAM) thetaClimFile CHARACTER*(MAX_LEN_FNAM) saltClimFile CHARACTER*(MAX_LEN_FNAM) surfQfile - CHARACTER*(MAX_LEN_FNAM) surfQswfile + CHARACTER*(MAX_LEN_FNAM) surfQnetFile + CHARACTER*(MAX_LEN_FNAM) surfQswFile CHARACTER*(MAX_LEN_FNAM) EmPmRfile CHARACTER*(MAX_LEN_FNAM) buoyancyRelation CHARACTER*(MAX_LEN_FNAM) uVelInitFile CHARACTER*(MAX_LEN_FNAM) vVelInitFile CHARACTER*(MAX_LEN_FNAM) pSurfInitFile + CHARACTER*(MAX_LEN_FNAM) dQdTfile + CHARACTER*(MAX_LEN_FNAM) ploadFile + CHARACTER*(MAX_LEN_FNAM) mdsioLocalDir + CHARACTER*(6) eosType + CHARACTER*(10) pickupSuff C-- COMMON /PARM_I/ Integer valued parameters used by the model. -C cg2dMaxIters - Maximum number of iterations in the +C cg2dMaxIters :: Maximum number of iterations in the C two-dimensional con. grad solver. -C cg2dChkResFreq - Frequency with which to check residual +C cg2dChkResFreq :: Frequency with which to check residual C in con. grad solver. -C cg3dMaxIters - Maximum number of iterations in the +C cg2dPreCondFreq :: Frequency for updating cg2d preconditioner +C (non-linear free-surf.) +C cg3dMaxIters :: Maximum number of iterations in the C three-dimensional con. grad solver. -C cg3dChkResFreq - Frequency with which to check residual +C cg3dChkResFreq :: Frequency with which to check residual C in con. grad solver. -C nIter0 - Start time-step number of for this run -C nTimeSteps - Number of timesteps to execute -C numStepsPerPickup - For offline setup. Frequency of pickup +C nIter0 :: Start time-step number of for this run +C nTimeSteps :: Number of timesteps to execute +C numStepsPerPickup :: For offline setup. Frequency of pickup C of flow fields. -C writeStatePrec - Precision used for writing model state. -C writeBinaryPrec - Precision used for writing binary files -C readBinaryPrec - Precision used for reading binary files -C nCheckLev - Holds current checkpoint level -C nShap - "Order" of shapiro filter to apply to -C model prognositic fields. -C nShap == 1 => del2 -C nShap == 2 => del4 -C nShap == 3 => del6 -C etc... +C writeStatePrec :: Precision used for writing model state. +C writeBinaryPrec :: Precision used for writing binary files +C readBinaryPrec :: Precision used for reading binary files +C nCheckLev :: Holds current checkpoint level +C nonlinFreeSurf :: option related to non-linear free surface +C =0 Linear free surface ; >0 Non-linear +C select_rStar :: option related to r* vertical coordinate +C =0 (default) use r coord. ; > 0 use r* +C tempAdvScheme :: Temp. Horiz.Advection scheme selector +C tempVertAdvScheme :: Temp. Vert. Advection scheme selector +C saltAdvScheme :: Salt. Horiz.advection scheme selector +C saltVertAdvScheme :: Salt. Vert. Advection scheme selector +C debugLevel :: debug level selector: higher -> more writing COMMON /PARM_I/ & cg2dMaxIters, - & cg2dChkResFreq, + & cg2dChkResFreq, cg2dPreCondFreq, & cg3dMaxIters, & cg3dChkResFreq, & nIter0, nTimeSteps, nEndIter, & numStepsPerPickup, & writeStatePrec, nCheckLev, & writeBinaryPrec, readBinaryPrec, - & nShap, zonal_filt_sinpow, zonal_filt_cospow + & nonlinFreeSurf, select_rStar, + & tempAdvScheme, tempVertAdvScheme, + & saltAdvScheme, saltVertAdvScheme, + & tracerAdvScheme, + & debugLevel INTEGER cg2dMaxIters INTEGER cg2dChkResFreq + INTEGER cg2dPreCondFreq INTEGER cg3dMaxIters INTEGER cg3dChkResFreq INTEGER nIter0 @@ -129,82 +164,138 @@ INTEGER writeBinaryPrec INTEGER readBinaryPrec INTEGER nCheckLev - INTEGER nShap - INTEGER zonal_filt_sinpow - INTEGER zonal_filt_cospow + INTEGER nonlinFreeSurf + INTEGER select_rStar + INTEGER tempAdvScheme, tempVertAdvScheme + INTEGER saltAdvScheme, saltVertAdvScheme + INTEGER tracerAdvScheme + INTEGER debugLevel + +C + INTEGER debLevZero + PARAMETER(debLevZero=0) + INTEGER debLevA + PARAMETER(debLevA=1) + INTEGER debLevB + PARAMETER(debLevB=2) C-- COMMON /PARM_L/ Logical valued parameters used by the model. -C usingCartesianGrid - If TRUE grid generation will be in a cartesian +C usingCartesianGrid :: If TRUE grid generation will be in a cartesian C coordinate frame. -C usingSphericalPolarGrid - If TRUE grid generation will be in a +C usingSphericalPolarGrid :: If TRUE grid generation will be in a C spherical polar frame. -C no_slip_sides - Impose "no-slip" at lateral boundaries. -C no_slip_bottom- Impose "no-slip" at bottom boundary. -C staggerTimeStep - enable a Stagger time stepping T,S Rho then U,V -C momViscosity - Flag which turns momentum friction terms on and off. -C momAdvection - Flag which turns advection of momentum on and off. -C momForcing - Flag which turns external forcing of momentum on +C usingCylindricalGrid :: If TRUE grid generation will be Cylindrical +C no_slip_sides :: Impose "no-slip" at lateral boundaries. +C no_slip_bottom :: Impose "no-slip" at bottom boundary. +C staggerTimeStep :: enable a Stagger time stepping T,S Rho then U,V +C momViscosity :: Flag which turns momentum friction terms on and off. +C momAdvection :: Flag which turns advection of momentum on and off. +C momForcing :: Flag which turns external forcing of momentum on C and off. -C momPressureForcing - Flag which turns pressure term in momentum equation +C momPressureForcing :: Flag which turns pressure term in momentum equation C on and off. -C metricTerms - Flag which turns metric terms on or off. -C usingSphericalPolarMTerms - If TRUE use spherical polar metric terms. -C useCoriolis - Flag which turns the coriolis terms on and off. -C tempDiffusion - Flag which turns diffusion of temperature on +C metricTerms :: Flag which turns metric terms on or off. +C usingSphericalPolarMTerms :: If TRUE use spherical polar metric terms. +C useNHMTerms :: If TRUE use non-hydrostatic metric terms. +C useCoriolis :: Flag which turns the coriolis terms on and off. +C tempDiffusion :: Flag which turns diffusion of temperature on C and off. -C tempAdvection - Flag which turns advection of temperature on +C tempAdvection :: Flag which turns advection of temperature on C and off. -C tempForcing - Flag which turns external forcing of temperature on +C tempForcing :: Flag which turns external forcing of temperature on C and off. -C saltDiffusion - Flag which turns diffusion of salinit on +C saltDiffusion :: Flag which turns diffusion of salinity on C and off. -C saltAdvection - Flag which turns advection of salinit on +C saltAdvection :: Flag which turns advection of salinity on C and off. -C saltForcing - Flag which turns external forcing of salinit on +C saltForcing :: Flag which turns external forcing of salinity on C and off. -C implicitFreeSurface - Set to true to use implcit free surface -C rigidLid - Set to true to use rigid lid -C momStepping - Turns momentum equation time-stepping off -C tempStepping - Turns temperature equation time-stepping off -C saltStepping - Turns salinity equation time-stepping off -C useConstantF - Coriolis parameter set to f0 -C useBetaPlaneF - Coriolis parameter set to f0 + beta.y -C useSphereF - Coriolis parameter set to 2.omega.sin(phi) -C implicitDiffusion - Turns implicit vertical diffusion on -C implicitViscosity - Turns implicit vertical viscosity on -C doThetaClimRelax - Set true if relaxation to temperature +C useRealFreshWaterFlux :: if True (=Natural BCS), treats P+R-E flux +C as a real Fresh Water (=> changes the Sea Level) +C if F, converts P+R-E to salt flux (no SL effect) +C rigidLid :: Set to true to use rigid lid +C implicitFreeSurface :: Set to true to use implcit free surface +C exactConserv :: Set to true to conserve exactly the total Volume +C uniformLin_PhiSurf :: Set to true to use a uniform Bo_surf in the +C linear relation Phi_surf = Bo_surf*eta +C momStepping :: Turns momentum equation time-stepping off +C tempStepping :: Turns temperature equation time-stepping off +C saltStepping :: Turns salinity equation time-stepping off +C tr1Stepping :: Turns passive tracer 1 time-stepping on/off +C useConstantF :: Coriolis parameter set to f0 +C useBetaPlaneF :: Coriolis parameter set to f0 + beta.y +C useSphereF :: Coriolis parameter set to 2.omega.sin(phi) +C useCDscheme :: use CD-scheme to calculate Coriolis terms. +C useJamartWetPoints :: Use wet-point method for Coriolis (Jamart and Ozer, 1986) +C useJamartMomAdv :: Use wet-point method for V.I. non-linear term +C SadournyCoriolis :: use the enstrophy conserving scheme by Sadourny +C upwindVorticity :: bias interpolation of vorticity in the Coriolis term +C highOrderVorticity :: use 3rd/4th order interp. of vorticity in Coriolis +C useAbsVorticity :: work with f+zeta in Coriolis terms +C implicitDiffusion :: Turns implicit vertical diffusion on +C implicitViscosity :: Turns implicit vertical viscosity on +C tempImplVertAdv :: Turns on implicit vertical advection for Temperature +C saltImplVertAdv :: Turns on implicit vertical advection for Salinity +C momImplVertAdv :: Turns on implicit vertical advection for Momentum +C multiDimAdvection :: Flag that enable multi-dimension advection +C useMultiDimAdvec :: True if multi-dim advection is used at least once +C forcing_In_AB :: if False, put forcing (Temp,Salt,Tracers) contribution +C out off Adams-Bashforth time stepping. +C doThetaClimRelax :: Set true if relaxation to temperature C climatology is required. -C doSaltClimRelax - Set true if relaxation to salinity +C doSaltClimRelax :: Set true if relaxation to salinity C climatology is required. -C periodicExternalForcing - Set true if forcing is time-dependant -C usingPCoords - Set to indicate that we are working in pressure -C coords. -C usingZCoords - Set to indicate that we are working in height -C coords. -C nonHydrostatic - Using non-hydrostatic terms -C globalFiles - Selects between "global" and "tiled" files -C allowFreezing - Allows water to freeze and form ice -C groundAtK1 - put the surface(k=1) at the Lower Boundary (=ground) +C periodicExternalForcing :: Set true if forcing is time-dependant +C usingPCoords :: Set to indicate that we are working in pressure +C coords. (jmc: is it still used ?) +C usingZCoords :: Set to indicate that we are working in height +C coords. (jmc: is it still used ?) +C useDynP_inEos_Zc :: use the dynamical pressure in EOS (with Z-coord.) +C this requires specific code for restart & exchange +C setCenterDr :: set cell Center depth and put Interface at the middle +C nonHydrostatic :: Using non-hydrostatic terms +C quasiHydrostatic :: Using non-hydrostatic terms in hydrostatic algorithm +C globalFiles :: Selects between "global" and "tiled" files +C useSingleCpuIO :: On SGI platforms, option globalFiles is either +C slow (f77) or does not work (f90). When +C useSingleCpuIO is set, mdsio_writefield.F +C outputs from master mpi process only. +C allowFreezing :: Allows surface water to freeze and form ice +C useOldFreezing :: use the old version (before checkpoint52a_pre, 2003-11-12) +C groundAtK1 :: put the surface(k=1) at the Lower Boundary (=ground) COMMON /PARM_L/ usingCartesianGrid, usingSphericalPolarGrid, - & usingCurvilinearGrid, + & usingCurvilinearGrid, usingCylindricalGrid, & no_slip_sides,no_slip_bottom, & staggerTimeStep, & momViscosity, momAdvection, momForcing, useCoriolis, - & momPressureForcing,tempDiffusion, tempAdvection, tempForcing, + & momPressureForcing, vectorInvariantMomentum, + & tempDiffusion, tempAdvection, tempForcing, & saltDiffusion, saltAdvection, saltForcing, - & implicitFreeSurface, rigidLid, - & momStepping, tempStepping, saltStepping, - & metricTerms, usingSphericalPolarMTerms, + & useRealFreshWaterFlux, + & rigidLid, implicitFreeSurface, exactConserv, uniformLin_PhiSurf, + & momStepping, tempStepping, saltStepping, tr1Stepping, + & metricTerms, usingSphericalPolarMTerms, useNHMTerms, & useConstantF, useBetaPlaneF, useSphereF, + & useCDscheme, + & useEnergyConservingCoriolis, useJamartWetPoints, useJamartMomAdv, + & SadournyCoriolis, upwindVorticity, highOrderVorticity, + & useAbsVorticity, & implicitDiffusion, implicitViscosity, - & doThetaClimRelax, doSaltClimRelax, - & periodicExternalForcing, usingPCoords, usingZCoords, - & nonHydrostatic, globalFiles, - & allowFreezing, groundAtK1 + & tempImplVertAdv, saltImplVertAdv, momImplVertAdv, + & multiDimAdvection, useMultiDimAdvec, forcing_In_AB, + & doThetaClimRelax, doSaltClimRelax, doTr1ClimRelax, + & periodicExternalForcing, + & usingPCoords, usingZCoords, useDynP_inEos_Zc, setCenterDr, + & nonHydrostatic, quasiHydrostatic, globalFiles, useSingleCpuIO, + & allowFreezing, useOldFreezing, groundAtK1, + & usePickupBeforeC35, usePickupBeforeC54, debugMode, + & readPickupWithTracer, writePickupWithTracer LOGICAL usingCartesianGrid LOGICAL usingSphericalPolarGrid + LOGICAL usingCylindricalGrid LOGICAL usingCurvilinearGrid LOGICAL usingSphericalPolarMTerms + LOGICAL useNHMTerms LOGICAL no_slip_sides LOGICAL no_slip_bottom LOGICAL staggerTimeStep @@ -213,39 +304,71 @@ LOGICAL momForcing LOGICAL momPressureForcing LOGICAL useCoriolis + LOGICAL vectorInvariantMomentum LOGICAL tempDiffusion LOGICAL tempAdvection LOGICAL tempForcing LOGICAL saltDiffusion LOGICAL saltAdvection LOGICAL saltForcing - LOGICAL implicitFreeSurface + LOGICAL useRealFreshWaterFlux LOGICAL rigidLid + LOGICAL implicitFreeSurface + LOGICAL exactConserv + LOGICAL uniformLin_PhiSurf LOGICAL momStepping LOGICAL tempStepping LOGICAL saltStepping + LOGICAL tr1Stepping LOGICAL metricTerms LOGICAL useConstantF LOGICAL useBetaPlaneF LOGICAL useSphereF + LOGICAL useCDscheme + LOGICAL useEnergyConservingCoriolis + LOGICAL useJamartWetPoints + LOGICAL useJamartMomAdv + LOGICAL SadournyCoriolis + LOGICAL upwindVorticity + LOGICAL highOrderVorticity + LOGICAL useAbsVorticity LOGICAL implicitDiffusion LOGICAL implicitViscosity + LOGICAL tempImplVertAdv + LOGICAL saltImplVertAdv + LOGICAL momImplVertAdv + LOGICAL multiDimAdvection + LOGICAL useMultiDimAdvec + LOGICAL forcing_In_AB LOGICAL doThetaClimRelax LOGICAL doSaltClimRelax + LOGICAL doTr1ClimRelax LOGICAL periodicExternalForcing LOGICAL usingPCoords LOGICAL usingZCoords + LOGICAL useDynP_inEos_Zc + LOGICAL setCenterDr LOGICAL nonHydrostatic + LOGICAL quasiHydrostatic LOGICAL globalFiles + LOGICAL useSingleCpuIO LOGICAL allowFreezing + LOGICAL useOldFreezing LOGICAL groundAtK1 + LOGICAL usePickupBeforeC35 + LOGICAL usePickupBeforeC54 + LOGICAL debugMode + LOGICAL readPickupWithTracer + LOGICAL writePickupWithTracer C-- COMMON /PARM_R/ "Real" valued parameters used by the model. C cg2dTargetResidual -C - Target residual for cg2d solver. +C :: Target residual for cg2d solver; no unit (RHS normalisation) +C cg2dTargetResWunit +C :: Target residual for cg2d solver; W unit (No RHS normalisation) C cg3dTargetResidual -C - Target residual for cg3d solver. -C cg2dpcOffDFac - Averaging weight for preconditioner off-diagonal. +C :: Target residual for cg3d solver. +C cg2dpcOffDFac :: Averaging weight for preconditioner off-diagonal. C Note. 20th May 1998 C I made a weird discovery! In the model paper we argue C for the form of the preconditioner used here ( see @@ -259,149 +382,176 @@ C drop form 192 -> 134! Need to investigate this further! C For now I have introduced a parameter cg2dpcOffDFac which C defaults to 0.51 but can be set at runtime. -C delP - Vertical grid spacing ( Pa ). -C delZ - Vertical grid spacing ( m ). -C delR - Vertical grid spacing ( units of r ). -C delX - Separation between cell faces (m) or (deg), depending +C delR :: Vertical grid spacing ( units of r ). +C delRc :: Vertical grid spacing between cell centers (r unit). +C delX :: Separation between cell faces (m) or (deg), depending C delY on input flags. -C gravity - Accel. due to gravity ( m/s^2 ) +C gravity :: Accel. due to gravity ( m/s^2 ) C recip_gravity and its inverse -C gBaro - Accel. due to gravity used in barotropic equation ( m/s^2 ) -C ronil - Reference density -C rhoConst - Vertically constant reference density -C startTime - Start time for model ( s ) -C phiMin - Latitude of southern most cell face. -C thetaMin - Longitude of western most cell face (this +C gBaro :: Accel. due to gravity used in barotropic equation ( m/s^2 ) +C rhoNil :: Reference density for the linear equation of state +C rhoConst :: Vertically constant reference density +C rhoConstFresh :: Constant reference density for fresh water (rain) +C startTime :: Start time for model ( s ) +C phiMin :: Latitude of southern most cell face. +C thetaMin :: Longitude of western most cell face (this C is an "inert" parameter but it is included C to make geographical references simple.) -C rSphere - Radius of sphere for a spherical polar grid ( m ). -C recip_RSphere - Reciprocal radius of sphere ( m ). -C f0 - Reference coriolis parameter ( 1/s ) +C rSphere :: Radius of sphere for a spherical polar grid ( m ). +C recip_RSphere :: Reciprocal radius of sphere ( m ). +C f0 :: Reference coriolis parameter ( 1/s ) C ( Southern edge f for beta plane ) -C beta - df/dy ( s^-1.m^-1 ) -C omega - Angular velocity ( rad/s ) -C viscAh - Eddy viscosity coeff. for mixing of +C beta :: df/dy ( s^-1.m^-1 ) +C omega :: Angular velocity ( rad/s ) +C rotationPeriod :: Rotation period (s) (= 2.pi/omega) +C viscAh :: Eddy viscosity coeff. for mixing of C momentum laterally ( m^2/s ) -C viscAz - Eddy viscosity coeff. for mixing of -C momentum vertically ( m^2/s ) -C viscAp - Eddy viscosity coeff. for mixing of -C momentum vertically ( Pa^2/s ) -C viscAr - Eddy viscosity coeff. for mixing of +C viscAr :: Eddy viscosity coeff. for mixing of C momentum vertically ( units of r^2/s ) -C viscA4 - Biharmonic viscosity coeff. for mixing of +C viscA4 :: Biharmonic viscosity coeff. for mixing of C momentum laterally ( m^4/s ) -C diffKhT - Laplacian diffusion coeff. for mixing of +C viscC2leith :: Leith non-dimensional viscosity factor +C viscAhMax :: Maximum eddy viscosity coeff. for mixing of +C momentum laterally ( m^2/s ) +C viscA4Max :: Maximum biharmonic viscosity coeff. for mixing of +C momentum laterally ( m^4/s ) +C viscAhGrid:: non-dimensional grid-size dependent viscosity +C viscA4Grid:: non-dimensional grid-size dependent bi-harmonic viscosity +C viscC4leith :: Leith non-dimensional viscosity factor +C diffKhT :: Laplacian diffusion coeff. for mixing of C heat laterally ( m^2/s ) -C diffKzT - Laplacian diffusion coeff. for mixing of -C heat vertically ( m^2/s ) -C diffKpT - Laplacian diffusion coeff. for mixing of -C heat vertically ( Pa^2/s ) -C diffKrT - Laplacian diffusion coeff. for mixing of +C diffKrT :: Laplacian diffusion coeff. for mixing of C heat vertically ( units of r^2/s ) -C diffK4T - Biharmonic diffusion coeff. for mixing of +C diffK4T :: Biharmonic diffusion coeff. for mixing of C heat laterally ( m^4/s ) -C diffKhS - Laplacian diffusion coeff. for mixing of +C diffKhS :: Laplacian diffusion coeff. for mixing of C salt laterally ( m^2/s ) -C diffKzS - Laplacian diffusion coeff. for mixing of -C salt vertically ( m^2/s ) -C diffKpS - Laplacian diffusion coeff. for mixing of -C salt vertically ( Pa^2/s ) -C diffKrS - Laplacian diffusion coeff. for mixing of +C diffKrS :: Laplacian diffusion coeff. for mixing of C salt vertically ( units of r^2/s ) -C diffK4S - Biharmonic diffusion coeff. for mixing of +C diffK4S :: Biharmonic diffusion coeff. for mixing of C salt laterally ( m^4/s ) -C deltaT - Default timestep ( s ) -C deltaTClock - Timestep used as model "clock". This determines the +C diffKrBL79surf :: T/S surface diffusivity (m^2/s) Bryan and Lewis, 1979 +C diffKrBL79deep :: T/S deep diffusivity (m^2/s) Bryan and Lewis, 1979 +C diffKrBL79scl :: depth scale for arctan fn (m) Bryan and Lewis, 1979 +C diffKrBL79Ho :: depth offset for arctan fn (m) Bryan and Lewis, 1979 +C deltaT :: Default timestep ( s ) +C deltaTClock :: Timestep used as model "clock". This determines the C IO frequencies and is used in tagging output. It can C be totally different to the dynamical time. Typically C it will be the deep-water timestep for accelerated runs. C Frequency of checkpointing and dumping of the model state C are referenced to this clock. ( s ) -C deltaTMom - Timestep for momemtum equations ( s ) -C deltaTtracer - Timestep for tracer equations ( s ) -C freesurfFac - Parameter to turn implicit free surface term on or off +C deltaTMom :: Timestep for momemtum equations ( s ) +C deltaTtracer :: Timestep for tracer equations ( s ) +C deltaTfreesurf :: Timestep for free-surface equation ( s ) +C freesurfFac :: Parameter to turn implicit free surface term on or off C freesurfac = 1. uses implicit free surface C freesurfac = 0. uses rigid lid -C implicSurfPress - parameter of the Crank-Nickelson time stepping : +C implicSurfPress :: parameter of the Crank-Nickelson time stepping : C Implicit part of Surface Pressure Gradient ( 0-1 ) -C implicDiv2Dflow - parameter of the Crank-Nickelson time stepping : +C implicDiv2Dflow :: parameter of the Crank-Nickelson time stepping : C Implicit part of barotropic flow Divergence ( 0-1 ) -C hFacMin - Minimum fraction size of a cell (affects hFacC etc...) -C hFacMinDz - Minimum dimesional size of a cell (affects hFacC etc..., m) -C hFacMinDp - Minimum dimesional size of a cell (affects hFacC etc..., Pa) -C hFacMinDr - Minimum dimesional size of a cell (affects hFacC etc..., units of r) -C tauCD - CD scheme coupling timescale ( 1/s ) -C rCD - CD scheme normalised coupling parameter ( 0-1 ) -C startTime - Starting time for this integration ( s ). -C endTime - Ending time for this integration ( s ). -C chkPtFreq - Frequency of rolling check pointing ( s ). -C pChkPtFreq - Frequency of permanent check pointing ( s ). -C dumpFreq - Frequency with which model state is written to +C hFacMin :: Minimum fraction size of a cell (affects hFacC etc...) +C hFacMinDz :: Minimum dimesional size of a cell (affects hFacC etc..., m) +C hFacMinDp :: Minimum dimesional size of a cell (affects hFacC etc..., Pa) +C hFacMinDr :: Minimum dimesional size of a cell (affects hFacC etc..., units of r) +C hFacInf :: Threshold (inf and sup) for fraction size of surface cell +C hFacSup that control vanishing and creating levels +C tauCD :: CD scheme coupling timescale ( 1/s ) +C rCD :: CD scheme normalised coupling parameter ( 0-1 ) +C startTime :: Starting time for this integration ( s ). +C endTime :: Ending time for this integration ( s ). +C chkPtFreq :: Frequency of rolling check pointing ( s ). +C pChkPtFreq :: Frequency of permanent check pointing ( s ). +C dumpFreq :: Frequency with which model state is written to C post-processing files ( s ). -C afFacMom - Advection of momentum term tracer parameter -C vfFacMom - Momentum viscosity tracer parameter -C pfFacMom - Momentum pressure forcing tracer parameter -C cfFacMom - Coriolis term tracer parameter -C foFacMom - Momentum forcing tracer parameter -C mtFacMom - Metric terms tracer parameter -C cosPower - Power of cosine of latitude to multiply viscosity -C cAdjFreq - Frequency of convective adjustment +C diagFreq :: Frequency with which model writes diagnostic output +C of intermediate quantities. +C afFacMom :: Advection of momentum term tracer parameter +C vfFacMom :: Momentum viscosity tracer parameter +C pfFacMom :: Momentum pressure forcing tracer parameter +C cfFacMom :: Coriolis term tracer parameter +C foFacMom :: Momentum forcing tracer parameter +C mtFacMom :: Metric terms tracer parameter +C cosPower :: Power of cosine of latitude to multiply viscosity +C cAdjFreq :: Frequency of convective adjustment C -C taveFreq - Frequency with which time-averaged model state is written to -C post-processing files ( s ). -C tauThetaClimRelax - Relaxation to climatology time scale ( s ). -C lambdaThetaClimRelax - Inverse time scale for relaxation ( 1/s ). -C tauSaltClimRelax - Relaxation to climatology time scale ( s ). -C lambdaSaltClimRelax - Inverse time scale for relaxation ( 1/s ). -C externForcingPeriod - Is the period of which forcing varies (eg. 1 month) -C externForcingCycle - Is the repeat time of the forcing (eg. 1 year) +C taveFreq :: Frequency with which time-averaged model state +C is written to post-processing files ( s ). +C tave_lastIter :: (for state variable only) fraction of the last time +C step (of each taveFreq period) put in the time average. +C (fraction for 1rst iter = 1 - tave_lastIter) +C tauThetaClimRelax :: Relaxation to climatology time scale ( s ). +C lambdaThetaClimRelax :: Inverse time scale for relaxation ( 1/s ). +C tauSaltClimRelax :: Relaxation to climatology time scale ( s ). +C lambdaSaltClimRelax :: Inverse time scale for relaxation ( 1/s ). +C latBandClimRelax :: latitude band where Relaxation to Clim. is applied, +C i.e. where |yC| <= latBandClimRelax +C externForcingPeriod :: Is the period of which forcing varies (eg. 1 month) +C externForcingCycle :: Is the repeat time of the forcing (eg. 1 year) C (note: externForcingCycle must be an integer C number times externForcingPeriod) -C horiVertRatio - Ratio on units in vertical to units in horizontal. +C convertFW2Salt :: salinity, used to convert Fresh-Water Flux to Salt Flux +C (use model surface (local) value if set to -1) +C temp_EvPrRn :: temperature of Rain & Evap. +C salt_EvPrRn :: salinity of Rain & Evap. +C trac_EvPrRn :: tracer concentration in Rain & Evap. +C (notes: a) tracer content of Rain/Evap only used if both +C NonLin_FrSurf & useRealFreshWater are set. +C b) use model surface (local) value if set to UNSET_RL) +C horiVertRatio :: Ratio on units in vertical to units in horizontal. C recip_horiVertRatio ( 1 if horiz in m and vertical in m ). C ( g*rho if horiz in m and vertical in Pa ). -C latFFTFiltLo - Low latitude for FFT filtering of latitude -C circles ( see filter*.F ) -C Ro_SeaLevel - standard position of Sea-Level in "R" coordinate, used as +C Ro_SeaLevel :: standard position of Sea-Level in "R" coordinate, used as C starting value (k=1) for vertical coordinate (rf(1)=Ro_SeaLevel) -C bottomDragLinear - Drag coefficient built in to core dynamics -C " Quadratic ( linear: 1/s, quadratic: 1/m ) - COMMON /PARM_R/ cg2dTargetResidual, cg2dpcOffDFac, - & cg3dTargetResidual, - & delP, delZ, delR, delX, delY, - & deltaT,deltaTmom, deltaTtracer, deltaTClock,abeps, startTime, +C bottomDragLinear :: Drag coefficient built in to core dynamics +C --"-"-- Quadratic ( linear: 1/s, quadratic: 1/m ) + COMMON /PARM_R/ cg2dTargetResidual, cg2dTargetResWunit, + & cg2dpcOffDFac, cg3dTargetResidual, + & delR, delRc, delX, delY, + & deltaT, deltaTmom, deltaTtracer, deltaTfreesurf, deltaTClock, + & abeps, startTime, & phiMin, thetaMin, rSphere, recip_RSphere, f0, beta, - & fCori, fCoriG, - & viscAh, viscAz, viscA4, viscAr, - & diffKhT, diffKzT, diffK4T, diffKrT, - & diffKhS, diffKzS, diffK4S, diffKrS, + & fCori, fCoriG, fCoriCos, + & viscAh, viscAhMax, viscAhGrid, viscC2leith, + & viscA4, viscA4Max, viscA4Grid, viscC4leith, + & viscAr, viscAstrain, viscAtension, + & diffKhT, diffK4T, diffKrT, + & diffKhS, diffK4S, diffKrS, + & diffKrBL79surf, diffKrBL79deep, diffKrBL79scl, diffKrBL79Ho, & delT, tauCD, rCD, freeSurfFac, implicSurfPress, implicDiv2Dflow, - & hFacMin, hFacMinDz, + & hFacMin, hFacMinDz, hFacInf, hFacSup, & gravity, recip_Gravity, gBaro, rhonil, recip_rhonil, - & recip_rhoConst, rhoConst, tRef, sRef, - & endTime, chkPtFreq, pchkPtFreq, dumpFreq, taveFreq, + & recip_rhoConst, rhoConst, + & rhoConstFresh, convertEmP2rUnit, tRef, sRef, + & endTime, chkPtFreq, pchkPtFreq, dumpFreq, adjDumpFreq, + & diagFreq, taveFreq, tave_lastIter, monitorFreq, & afFacMom, vfFacMom, pfFacMom, cfFacMom, foFacMom, mtFacMom, - & cosPower, - & cAdjFreq, omega, tauThetaClimRelax, lambdaThetaClimRelax, + & cosPower, cAdjFreq, omega, rotationPeriod, + & tauThetaClimRelax, lambdaThetaClimRelax, & tauSaltClimRelax, lambdaSaltClimRelax, + & tauTr1ClimRelax, lambdaTr1ClimRelax, latBandClimRelax, & externForcingCycle, externForcingPeriod, - & viscAp, diffKpT, diffKpS, hFacMinDr, hFacMinDp, - & theta_S, specVol_S, horiVertRatio, recip_horiVertRatio, - & latFFTFiltLo, ivdc_kappa, Ro_SeaLevel, zonal_filt_lat, - & bottomDragLinear,bottomDragQuadratic + & convertFW2Salt, temp_EvPrRn, salt_EvPrRn, trac_EvPrRn, + & hFacMinDr, hFacMinDp, + & horiVertRatio, recip_horiVertRatio, + & ivdc_kappa, Ro_SeaLevel, + & bottomDragLinear,bottomDragQuadratic, + & tCyl _RL cg2dTargetResidual + _RL cg2dTargetResWunit _RL cg3dTargetResidual _RL cg2dpcOffDFac - _RL delZ(Nr) - _RL delP(Nr) _RL delR(Nr) + _RL delRc(Nr+1) _RL delX(Nx) _RL delY(Ny) _RL deltaT _RL deltaTClock _RL deltaTmom _RL deltaTtracer + _RL deltaTfreesurf _RL abeps _RL phiMin _RL thetaMin @@ -415,22 +565,30 @@ _RL hFacMinDz _RL hFacMinDp _RL hFacMinDr + _RL hFacInf + _RL hFacSup _RL beta _RL viscAh - _RL viscAz - _RL viscAp + _RL viscAhMax + _RL viscAhGrid + _RL viscC2leith + _RL viscAstrain + _RL viscAtension _RL viscAr _RL viscA4 + _RL viscA4Max + _RL viscA4Grid + _RL viscC4leith _RL diffKhT _RL diffKrT - _RL diffKzT - _RL diffKpT _RL diffK4T _RL diffKhS _RL diffKrS - _RL diffKzS - _RL diffKpS _RL diffK4S + _RL diffKrBL79surf + _RL diffKrBL79deep + _RL diffKrBL79scl + _RL diffKrBL79Ho _RL delt _RL tauCD _RL rCD @@ -441,18 +599,23 @@ _RL recip_rhonil _RL rhoConst _RL recip_rhoConst - _RL specVol_S(Nr) + _RL rhoConstFresh + _RL convertEmP2rUnit _RL tRef(Nr) - _RL theta_S(Nr) _RL sRef(Nr) _RS fCori(1-OLx:sNx+OLx,1-OLy:sNy+OLy,nSx,nSy) _RS fCoriG(1-OLx:sNx+OLx,1-OLy:sNy+OLy,nSx,nSy) + _RS fCoriCos(1-OLx:sNx+OLx,1-OLy:sNy+OLy,nSx,nSy) _RL startTime _RL endTime _RL chkPtFreq _RL pChkPtFreq _RL dumpFreq + _RL adjDumpFreq + _RL diagFreq _RL taveFreq + _RL tave_lastIter + _RL monitorFreq _RL afFacMom _RL vfFacMom _RL pfFacMom @@ -462,44 +625,95 @@ _RL cosPower _RL cAdjFreq _RL omega + _RL rotationPeriod _RL tauThetaClimRelax _RL lambdaThetaClimRelax _RL tauSaltClimRelax _RL lambdaSaltClimRelax + _RL tauTr1ClimRelax + _RL lambdaTr1ClimRelax + _RL latBandClimRelax _RL externForcingCycle _RL externForcingPeriod + _RL convertFW2Salt + _RL temp_EvPrRn + _RL salt_EvPrRn + _RL trac_EvPrRn _RL horiVertRatio _RL recip_horiVertRatio - _RL latFFTFiltLo _RL ivdc_kappa _RL Ro_SeaLevel - _RL zonal_filt_lat _RL bottomDragLinear _RL bottomDragQuadratic + _RL tCyl - COMMON /PARM_A/ HeatCapacity_Cp,recip_Cp, - & Lamba_theta +C-- COMMON /PARM_A/ Thermodynamics constants ? + COMMON /PARM_A/ HeatCapacity_Cp,recip_Cp _RL HeatCapacity_Cp - _RL Lamba_theta _RL recip_Cp -C Equation of State (polynomial coeffients) - COMMON /PARM_EOS_NL/ eosC,eosSig0,eosRefT,eosRefS - _RL eosC(9,Nr+1),eosSig0(Nr+1),eosRefT(Nr+1),eosRefS(Nr+1) -C Linear equation of state -C tAlpha - Linear EOS thermal expansion coefficient ( 1/degree ). -C sBeta - Linear EOS haline contraction coefficient. - COMMON /PARM_EOS_LIN/ tAlpha,sBeta,eosType - _RL tAlpha - _RL sBeta - character*(6) eosType +C-- COMMON /PARM_ATM/ Atmospheric physical parameters (Ideal Gas EOS, ...) +C celsius2K :: convert centigrade (Celsius) degree to Kelvin +C atm_Po :: standard reference pressure +C atm_Cp :: specific heat (Cp) of the (dry) air at constant pressure +C atm_Rd :: gas constant for dry air +C atm_kappa :: kappa = R/Cp (R: constant of Ideal Gas EOS) +C atm_Rq :: water vapour specific volume anomaly relative to dry air +C (e.g. typical value = (29/18 -1) 10^-3 with q [g/kg]) +C integr_GeoPot :: option to select the way we integrate the geopotential +C (still a subject of discussions ...) +C selectFindRoSurf :: select the way surf. ref. pressure (=Ro_surf) is +C derived from the orography. Implemented: 0,1 (see INI_P_GROUND) + COMMON /PARM_ATM/ + & celsius2K, + & atm_Cp, atm_Rd, atm_kappa, atm_Rq, atm_Po, + & integr_GeoPot, selectFindRoSurf + _RL celsius2K + _RL atm_Po, atm_Cp, atm_Rd, atm_kappa, atm_Rq + INTEGER integr_GeoPot, selectFindRoSurf C Logical flags for selecting packages LOGICAL useKPP LOGICAL useGMRedi LOGICAL useOBCS LOGICAL useAIM + LOGICAL useLand + LOGICAL useGrdchk LOGICAL useECCO + LOGICAL useSHAP_FILT + LOGICAL useZONAL_FILT + LOGICAL useFLT + LOGICAL usePTRACERS + LOGICAL useSBO + LOGICAL useSEAICE + LOGICAL useBulkForce + LOGICAL useThSIce + LOGICAL usefizhi + LOGICAL usegridalt + LOGICAL usediagnostics + LOGICAL useEBM COMMON /PARM_PACKAGES/ - & useKPP, useGMRedi, useOBCS, useAIM, useECCO - + & useKPP, useGMRedi, useOBCS, useAIM, useLand, useECCO, + & useSHAP_FILT, useZONAL_FILT, useGrdchk, useFLT, + & usePTRACERS, useSBO, useSEAICE, useThSIce, useBulkForce, + & usefizhi, usegridalt, usediagnostics, useEBM + +C Run-time flags for early-initialization of MNC + LOGICAL + & useMNC, + & mnc_use_indir, mnc_use_outdir, mnc_outdir_date, + & mnc_echo_gvtypes, mnc_pickup_write, mnc_pickup_read, + & mnc_use_for_mon + CHARACTER*(MAX_LEN_FNAM) mnc_outdir_str + CHARACTER*(MAX_LEN_FNAM) mnc_indir_str + COMMON /PARM_MNC/ + & useMNC, + & mnc_use_indir, mnc_use_outdir, mnc_outdir_date, + & mnc_echo_gvtypes, mnc_pickup_write, mnc_pickup_read, + & mnc_outdir_str, mnc_indir_str, + & mnc_use_for_mon + + +CEH3 ;;; Local Variables: *** +CEH3 ;;; mode:fortran *** +CEH3 ;;; End: ***