64 |
C zonalWindFile :: File containing zonal wind data |
C zonalWindFile :: File containing zonal wind data |
65 |
C meridWindFile :: File containing meridional wind data |
C meridWindFile :: File containing meridional wind data |
66 |
C thetaClimFile :: File containing surface theta climataology used |
C thetaClimFile :: File containing surface theta climataology used |
67 |
C in relaxation term -lambda(theta-theta*) |
C in relaxation term -lambda(theta-theta*) |
68 |
C saltClimFile :: File containing surface salt climataology used |
C saltClimFile :: File containing surface salt climataology used |
69 |
C in relaxation term -lambda(salt-salt*) |
C in relaxation term -lambda(salt-salt*) |
70 |
C surfQfile :: File containing surface heat flux, excluding SW |
C surfQfile :: File containing surface heat flux, excluding SW |
71 |
C (old version, kept for backward compatibility) |
C (old version, kept for backward compatibility) |
72 |
C surfQnetFile :: File containing surface net heat flux |
C surfQnetFile :: File containing surface net heat flux |
73 |
C surfQswFile :: File containing surface shortwave radiation |
C surfQswFile :: File containing surface shortwave radiation |
|
C dQdTfile :: File containing thermal relaxation coefficient |
|
74 |
C EmPmRfile :: File containing surface fresh water flux |
C EmPmRfile :: File containing surface fresh water flux |
75 |
C NOTE: for backward compatibility EmPmRfile is specified in |
C NOTE: for backward compatibility EmPmRfile is specified in |
76 |
C m/s when using external_fields_load.F. It is converted |
C m/s when using external_fields_load.F. It is converted |
77 |
C to kg/m2/s by multiplying by rhoConstFresh. |
C to kg/m2/s by multiplying by rhoConstFresh. |
78 |
C saltFluxFile :: File containing surface salt flux |
C saltFluxFile :: File containing surface salt flux |
79 |
C pLoadFile :: File containing pressure loading |
C pLoadFile :: File containing pressure loading |
80 |
|
C addMassFile :: File containing source/sink of fluid in the interior |
81 |
C eddyPsiXFile :: File containing zonal Eddy streamfunction data |
C eddyPsiXFile :: File containing zonal Eddy streamfunction data |
82 |
C eddyPsiYFile :: File containing meridional Eddy streamfunction data |
C eddyPsiYFile :: File containing meridional Eddy streamfunction data |
83 |
C the_run_name :: string identifying the name of the model "run" |
C the_run_name :: string identifying the name of the model "run" |
97 |
& surfQfile, surfQnetFile, surfQswFile, |
& surfQfile, surfQnetFile, surfQswFile, |
98 |
& lambdaThetaFile, lambdaSaltFile, |
& lambdaThetaFile, lambdaSaltFile, |
99 |
& uVelInitFile, vVelInitFile, pSurfInitFile, |
& uVelInitFile, vVelInitFile, pSurfInitFile, |
100 |
& dQdTfile, ploadFile, |
& pLoadFile, addMassFile, |
101 |
& eddyPsiXFile, eddyPsiYFile, |
& eddyPsiXFile, eddyPsiYFile, |
102 |
& the_run_name |
& the_run_name |
103 |
CHARACTER*(MAX_LEN_FNAM) buoyancyRelation |
CHARACTER*(MAX_LEN_FNAM) buoyancyRelation |
133 |
CHARACTER*(MAX_LEN_FNAM) uVelInitFile |
CHARACTER*(MAX_LEN_FNAM) uVelInitFile |
134 |
CHARACTER*(MAX_LEN_FNAM) vVelInitFile |
CHARACTER*(MAX_LEN_FNAM) vVelInitFile |
135 |
CHARACTER*(MAX_LEN_FNAM) pSurfInitFile |
CHARACTER*(MAX_LEN_FNAM) pSurfInitFile |
136 |
CHARACTER*(MAX_LEN_FNAM) dQdTfile |
CHARACTER*(MAX_LEN_FNAM) pLoadFile |
137 |
CHARACTER*(MAX_LEN_FNAM) ploadFile |
CHARACTER*(MAX_LEN_FNAM) addMassFile |
138 |
CHARACTER*(MAX_LEN_FNAM) eddyPsiXFile |
CHARACTER*(MAX_LEN_FNAM) eddyPsiXFile |
139 |
CHARACTER*(MAX_LEN_FNAM) eddyPsiYFile |
CHARACTER*(MAX_LEN_FNAM) eddyPsiYFile |
140 |
CHARACTER*(MAX_LEN_FNAM) lambdaThetaFile |
CHARACTER*(MAX_LEN_FNAM) lambdaThetaFile |
143 |
|
|
144 |
C-- COMMON /PARM_I/ Integer valued parameters used by the model. |
C-- COMMON /PARM_I/ Integer valued parameters used by the model. |
145 |
C cg2dMaxIters :: Maximum number of iterations in the |
C cg2dMaxIters :: Maximum number of iterations in the |
146 |
C two-dimensional con. grad solver. |
C two-dimensional con. grad solver. |
147 |
C cg2dChkResFreq :: Frequency with which to check residual |
C cg2dChkResFreq :: Frequency with which to check residual |
148 |
C in con. grad solver. |
C in con. grad solver. |
149 |
C cg2dPreCondFreq :: Frequency for updating cg2d preconditioner |
C cg2dPreCondFreq :: Frequency for updating cg2d preconditioner |
150 |
C (non-linear free-surf.) |
C (non-linear free-surf.) |
151 |
|
C cg2dUseMinResSol :: =0 : use last-iteration/converged solution |
152 |
|
C =1 : use solver minimum-residual solution |
153 |
C cg3dMaxIters :: Maximum number of iterations in the |
C cg3dMaxIters :: Maximum number of iterations in the |
154 |
C three-dimensional con. grad solver. |
C three-dimensional con. grad solver. |
155 |
C cg3dChkResFreq :: Frequency with which to check residual |
C cg3dChkResFreq :: Frequency with which to check residual |
156 |
C in con. grad solver. |
C in con. grad solver. |
157 |
|
C printResidualFreq :: Frequency for printing residual in CG iterations |
158 |
C nIter0 :: Start time-step number of for this run |
C nIter0 :: Start time-step number of for this run |
159 |
C nTimeSteps :: Number of timesteps to execute |
C nTimeSteps :: Number of timesteps to execute |
160 |
C writeStatePrec :: Precision used for writing model state. |
C writeStatePrec :: Precision used for writing model state. |
176 |
C (3-D generalisation of oceanic real-fresh water flux) |
C (3-D generalisation of oceanic real-fresh water flux) |
177 |
C =0 off ; =1 add fluid ; =-1 virtual flux (no mass added) |
C =0 off ; =1 add fluid ; =-1 virtual flux (no mass added) |
178 |
C momForcingOutAB :: =1: take momentum forcing contribution |
C momForcingOutAB :: =1: take momentum forcing contribution |
179 |
C out of (=0: in) Adams-Bashforth time stepping. |
C out of (=0: in) Adams-Bashforth time stepping. |
180 |
C tracForcingOutAB :: =1: take tracer (Temp,Salt,pTracers) forcing contribution |
C tracForcingOutAB :: =1: take tracer (Temp,Salt,pTracers) forcing contribution |
181 |
C out of (=0: in) Adams-Bashforth time stepping. |
C out of (=0: in) Adams-Bashforth time stepping. |
182 |
C tempAdvScheme :: Temp. Horiz.Advection scheme selector |
C tempAdvScheme :: Temp. Horiz.Advection scheme selector |
183 |
C tempVertAdvScheme :: Temp. Vert. Advection scheme selector |
C tempVertAdvScheme :: Temp. Vert. Advection scheme selector |
184 |
C saltAdvScheme :: Salt. Horiz.advection scheme selector |
C saltAdvScheme :: Salt. Horiz.advection scheme selector |
191 |
C and statistics ; higher -> more writing |
C and statistics ; higher -> more writing |
192 |
|
|
193 |
COMMON /PARM_I/ |
COMMON /PARM_I/ |
194 |
& cg2dMaxIters, |
& cg2dMaxIters, cg2dChkResFreq, |
195 |
& cg2dChkResFreq, cg2dPreCondFreq, |
& cg2dPreCondFreq, cg2dUseMinResSol, |
196 |
& cg3dMaxIters, |
& cg3dMaxIters, cg3dChkResFreq, |
197 |
& cg3dChkResFreq, |
& printResidualFreq, |
198 |
& nIter0, nTimeSteps, nEndIter, |
& nIter0, nTimeSteps, nEndIter, |
199 |
& writeStatePrec, |
& writeStatePrec, |
200 |
& writeBinaryPrec, readBinaryPrec, |
& writeBinaryPrec, readBinaryPrec, |
211 |
INTEGER cg2dMaxIters |
INTEGER cg2dMaxIters |
212 |
INTEGER cg2dChkResFreq |
INTEGER cg2dChkResFreq |
213 |
INTEGER cg2dPreCondFreq |
INTEGER cg2dPreCondFreq |
214 |
|
INTEGER cg2dUseMinResSol |
215 |
INTEGER cg3dMaxIters |
INTEGER cg3dMaxIters |
216 |
INTEGER cg3dChkResFreq |
INTEGER cg3dChkResFreq |
217 |
|
INTEGER printResidualFreq |
218 |
INTEGER nIter0 |
INTEGER nIter0 |
219 |
INTEGER nTimeSteps |
INTEGER nTimeSteps |
220 |
INTEGER nEndIter |
INTEGER nEndIter |
238 |
C-- COMMON /PARM_L/ Logical valued parameters used by the model. |
C-- COMMON /PARM_L/ Logical valued parameters used by the model. |
239 |
C- Coordinate + Grid params: |
C- Coordinate + Grid params: |
240 |
C fluidIsAir :: Set to indicate that the fluid major constituent |
C fluidIsAir :: Set to indicate that the fluid major constituent |
241 |
C is air |
C is air |
242 |
C fluidIsWater :: Set to indicate that the fluid major constituent |
C fluidIsWater :: Set to indicate that the fluid major constituent |
243 |
C is water |
C is water |
244 |
C usingPCoords :: Set to indicate that we are working in a pressure |
C usingPCoords :: Set to indicate that we are working in a pressure |
245 |
C type coordinate (p or p*). |
C type coordinate (p or p*). |
246 |
C usingZCoords :: Set to indicate that we are working in a height |
C usingZCoords :: Set to indicate that we are working in a height |
247 |
C type coordinate (z or z*) |
C type coordinate (z or z*) |
248 |
C useDynP_inEos_Zc :: use the dynamical pressure in EOS (with Z-coord.) |
C useDynP_inEos_Zc :: use the dynamical pressure in EOS (with Z-coord.) |
249 |
C this requires specific code for restart & exchange |
C this requires specific code for restart & exchange |
250 |
C usingCartesianGrid :: If TRUE grid generation will be in a cartesian |
C usingCartesianGrid :: If TRUE grid generation will be in a cartesian |
251 |
C coordinate frame. |
C coordinate frame. |
252 |
C usingSphericalPolarGrid :: If TRUE grid generation will be in a |
C usingSphericalPolarGrid :: If TRUE grid generation will be in a |
253 |
C spherical polar frame. |
C spherical polar frame. |
254 |
C rotateGrid :: rotate grid coordinates to geographical coordinates |
C rotateGrid :: rotate grid coordinates to geographical coordinates |
255 |
C according to Euler angles phiEuler, thetaEuler, psiEuler |
C according to Euler angles phiEuler, thetaEuler, psiEuler |
|
C usingCurvilinearGrid :: If TRUE, use a curvilinear grid (to be provided) |
|
256 |
C usingCylindricalGrid :: If TRUE grid generation will be Cylindrical |
C usingCylindricalGrid :: If TRUE grid generation will be Cylindrical |
257 |
|
C usingCurvilinearGrid :: If TRUE, use a curvilinear grid (to be provided) |
258 |
|
C hasWetCSCorners :: domain contains CS-type corners where dynamics is solved |
259 |
C deepAtmosphere :: deep model (drop the shallow-atmosphere approximation) |
C deepAtmosphere :: deep model (drop the shallow-atmosphere approximation) |
260 |
C setInterFDr :: set Interface depth (put cell-Center at the middle) |
C setInterFDr :: set Interface depth (put cell-Center at the middle) |
261 |
C setCenterDr :: set cell-Center depth (put Interface at the middle) |
C setCenterDr :: set cell-Center depth (put Interface at the middle) |
262 |
C- Momentum params: |
C- Momentum params: |
263 |
C no_slip_sides :: Impose "no-slip" at lateral boundaries. |
C no_slip_sides :: Impose "no-slip" at lateral boundaries. |
264 |
C no_slip_bottom :: Impose "no-slip" at bottom boundary. |
C no_slip_bottom :: Impose "no-slip" at bottom boundary. |
265 |
|
C useSmag3D :: Use isotropic 3-D Smagorinsky |
266 |
C useFullLeith :: Set to true to use full Leith viscosity(may be unstable |
C useFullLeith :: Set to true to use full Leith viscosity(may be unstable |
267 |
C on irregular grids) |
C on irregular grids) |
268 |
C useStrainTensionVisc:: Set to true to use Strain-Tension viscous terms |
C useStrainTensionVisc:: Set to true to use Strain-Tension viscous terms |
288 |
C useAbsVorticity :: work with f+zeta in Coriolis terms |
C useAbsVorticity :: work with f+zeta in Coriolis terms |
289 |
C upwindShear :: use 1rst order upwind interp. (V.I., vertical advection) |
C upwindShear :: use 1rst order upwind interp. (V.I., vertical advection) |
290 |
C momStepping :: Turns momentum equation time-stepping off |
C momStepping :: Turns momentum equation time-stepping off |
291 |
|
C calc_wVelocity :: Turns of vertical velocity calculation off |
292 |
C- Temp. & Salt params: |
C- Temp. & Salt params: |
293 |
C tempStepping :: Turns temperature equation time-stepping off |
C tempStepping :: Turns temperature equation time-stepping on/off |
294 |
C saltStepping :: Turns salinity equation time-stepping off |
C saltStepping :: Turns salinity equation time-stepping on/off |
295 |
|
C addFrictionHeating :: account for frictional heating |
296 |
C tempAdvection :: Flag which turns advection of temperature on and off. |
C tempAdvection :: Flag which turns advection of temperature on and off. |
297 |
|
C tempVertDiff4 :: use vertical bi-harmonic diffusion for temperature |
298 |
C tempIsActiveTr :: Pot.Temp. is a dynamically active tracer |
C tempIsActiveTr :: Pot.Temp. is a dynamically active tracer |
299 |
C tempForcing :: Flag which turns external forcing of temperature on |
C tempForcing :: Flag which turns external forcing of temperature on/off |
|
C and off. |
|
300 |
C saltAdvection :: Flag which turns advection of salinity on and off. |
C saltAdvection :: Flag which turns advection of salinity on and off. |
301 |
|
C saltVertDiff4 :: use vertical bi-harmonic diffusion for salinity |
302 |
C saltIsActiveTr :: Salinity is a dynamically active tracer |
C saltIsActiveTr :: Salinity is a dynamically active tracer |
303 |
C saltForcing :: Flag which turns external forcing of salinity on |
C saltForcing :: Flag which turns external forcing of salinity on/off |
|
C and off. |
|
304 |
C maskIniTemp :: apply mask to initial Pot.Temp. |
C maskIniTemp :: apply mask to initial Pot.Temp. |
305 |
C maskIniSalt :: apply mask to initial salinity |
C maskIniSalt :: apply mask to initial salinity |
306 |
C checkIniTemp :: check for points with identically zero initial Pot.Temp. |
C checkIniTemp :: check for points with identically zero initial Pot.Temp. |
307 |
C checkIniSalt :: check for points with identically zero initial salinity |
C checkIniSalt :: check for points with identically zero initial salinity |
|
C useRealFreshWaterFlux :: if True (=Natural BCS), treats P+R-E flux |
|
|
C as a real Fresh Water (=> changes the Sea Level) |
|
|
C if F, converts P+R-E to salt flux (no SL effect) |
|
308 |
C- Pressure solver related parameters (PARM02) |
C- Pressure solver related parameters (PARM02) |
309 |
C useSRCGSolver :: Set to true to use conjugate gradient |
C useSRCGSolver :: Set to true to use conjugate gradient |
310 |
C solver with single reduction (only one call of |
C solver with single reduction (only one call of |
311 |
C s/r mpi_allreduce), default is false |
C s/r mpi_allreduce), default is false |
312 |
C- Time-stepping params: |
C- Time-stepping & free-surface params: |
313 |
C rigidLid :: Set to true to use rigid lid |
C rigidLid :: Set to true to use rigid lid |
314 |
C implicitFreeSurface :: Set to true to use implicit free surface |
C implicitFreeSurface :: Set to true to use implicit free surface |
315 |
|
C uniformLin_PhiSurf :: Set to true to use a uniform Bo_surf in the |
316 |
|
C linear relation Phi_surf = Bo_surf*eta |
317 |
|
C uniformFreeSurfLev :: TRUE if free-surface level-index is uniform (=1) |
318 |
C exactConserv :: Set to true to conserve exactly the total Volume |
C exactConserv :: Set to true to conserve exactly the total Volume |
319 |
C linFSConserveTr :: Set to true to correct source/sink of tracer |
C linFSConserveTr :: Set to true to correct source/sink of tracer |
320 |
C at the surface due to Linear Free Surface |
C at the surface due to Linear Free Surface |
321 |
C uniformLin_PhiSurf :: Set to true to use a uniform Bo_surf in the |
C useRealFreshWaterFlux :: if True (=Natural BCS), treats P+R-E flux |
322 |
C linear relation Phi_surf = Bo_surf*eta |
C as a real Fresh Water (=> changes the Sea Level) |
323 |
|
C if F, converts P+R-E to salt flux (no SL effect) |
324 |
C quasiHydrostatic :: Using non-hydrostatic terms in hydrostatic algorithm |
C quasiHydrostatic :: Using non-hydrostatic terms in hydrostatic algorithm |
325 |
C nonHydrostatic :: Using non-hydrostatic algorithm |
C nonHydrostatic :: Using non-hydrostatic algorithm |
326 |
C use3Dsolver :: set to true to use 3-D pressure solver |
C use3Dsolver :: set to true to use 3-D pressure solver |
327 |
C implicitIntGravWave :: treat Internal Gravity Wave implicitly |
C implicitIntGravWave :: treat Internal Gravity Wave implicitly |
328 |
C staggerTimeStep :: enable a Stagger time stepping U,V (& W) then T,S |
C staggerTimeStep :: enable a Stagger time stepping U,V (& W) then T,S |
329 |
|
C doResetHFactors :: Do reset thickness factors @ beginning of each time-step |
330 |
C implicitDiffusion :: Turns implicit vertical diffusion on |
C implicitDiffusion :: Turns implicit vertical diffusion on |
331 |
C implicitViscosity :: Turns implicit vertical viscosity on |
C implicitViscosity :: Turns implicit vertical viscosity on |
332 |
C tempImplVertAdv :: Turns on implicit vertical advection for Temperature |
C tempImplVertAdv :: Turns on implicit vertical advection for Temperature |
346 |
C climatology is required. |
C climatology is required. |
347 |
C doSaltClimRelax :: Set true if relaxation to salinity |
C doSaltClimRelax :: Set true if relaxation to salinity |
348 |
C climatology is required. |
C climatology is required. |
349 |
|
C balanceThetaClimRelax :: substract global mean effect at every time step |
350 |
|
C balanceSaltClimRelax :: substract global mean effect at every time step |
351 |
C allowFreezing :: Allows surface water to freeze and form ice |
C allowFreezing :: Allows surface water to freeze and form ice |
352 |
C useOldFreezing :: use the old version (before checkpoint52a_pre, 2003-11-12) |
C useOldFreezing :: use the old version (before checkpoint52a_pre, 2003-11-12) |
353 |
C periodicExternalForcing :: Set true if forcing is time-dependant |
C periodicExternalForcing :: Set true if forcing is time-dependant |
369 |
C monitor_stdio :: use stdio for monitor output |
C monitor_stdio :: use stdio for monitor output |
370 |
C dumpInitAndLast :: dumps model state to files at Initial (nIter0) |
C dumpInitAndLast :: dumps model state to files at Initial (nIter0) |
371 |
C & Last iteration, in addition multiple of dumpFreq iter. |
C & Last iteration, in addition multiple of dumpFreq iter. |
|
C debugMode :: controls printing of debug msg (sequence of S/R calls). |
|
372 |
C printDomain :: controls printing of domain fields (bathy, hFac ...). |
C printDomain :: controls printing of domain fields (bathy, hFac ...). |
373 |
|
|
374 |
COMMON /PARM_L/ |
COMMON /PARM_L/ |
375 |
& fluidIsAir, fluidIsWater, |
& fluidIsAir, fluidIsWater, |
376 |
& usingPCoords, usingZCoords, useDynP_inEos_Zc, |
& usingPCoords, usingZCoords, useDynP_inEos_Zc, |
377 |
& usingCartesianGrid, usingSphericalPolarGrid, rotateGrid, |
& usingCartesianGrid, usingSphericalPolarGrid, rotateGrid, |
378 |
& usingCurvilinearGrid, usingCylindricalGrid, |
& usingCylindricalGrid, usingCurvilinearGrid, hasWetCSCorners, |
379 |
& deepAtmosphere, setInterFDr, setCenterDr, |
& deepAtmosphere, setInterFDr, setCenterDr, |
380 |
& no_slip_sides, no_slip_bottom, |
& no_slip_sides, no_slip_bottom, useSmag3D, |
381 |
& useFullLeith, useStrainTensionVisc, useAreaViscLength, |
& useFullLeith, useStrainTensionVisc, useAreaViscLength, |
382 |
& momViscosity, momAdvection, momForcing, |
& momViscosity, momAdvection, momForcing, |
383 |
& momPressureForcing, metricTerms, useNHMTerms, |
& momPressureForcing, metricTerms, useNHMTerms, |
386 |
& useEnergyConservingCoriolis, useJamartWetPoints, useJamartMomAdv, |
& useEnergyConservingCoriolis, useJamartWetPoints, useJamartMomAdv, |
387 |
& upwindVorticity, highOrderVorticity, |
& upwindVorticity, highOrderVorticity, |
388 |
& useAbsVorticity, upwindShear, |
& useAbsVorticity, upwindShear, |
389 |
& momStepping, tempStepping, saltStepping, |
& momStepping, calc_wVelocity, tempStepping, saltStepping, |
390 |
& tempAdvection, tempIsActiveTr, tempForcing, |
& addFrictionHeating, |
391 |
& saltAdvection, saltIsActiveTr, saltForcing, |
& tempAdvection, tempVertDiff4, tempIsActiveTr, tempForcing, |
392 |
|
& saltAdvection, saltVertDiff4, saltIsActiveTr, saltForcing, |
393 |
& maskIniTemp, maskIniSalt, checkIniTemp, checkIniSalt, |
& maskIniTemp, maskIniSalt, checkIniTemp, checkIniSalt, |
394 |
& useRealFreshWaterFlux, useSRCGSolver, |
& useSRCGSolver, |
395 |
& rigidLid, implicitFreeSurface, exactConserv, linFSConserveTr, |
& rigidLid, implicitFreeSurface, |
396 |
& uniformLin_PhiSurf, |
& uniformLin_PhiSurf, uniformFreeSurfLev, |
397 |
& quasiHydrostatic, nonHydrostatic, |
& exactConserv, linFSConserveTr, useRealFreshWaterFlux, |
398 |
& use3Dsolver, implicitIntGravWave, staggerTimeStep, |
& quasiHydrostatic, nonHydrostatic, use3Dsolver, |
399 |
|
& implicitIntGravWave, staggerTimeStep, doResetHFactors, |
400 |
& implicitDiffusion, implicitViscosity, |
& implicitDiffusion, implicitViscosity, |
401 |
& tempImplVertAdv, saltImplVertAdv, momImplVertAdv, |
& tempImplVertAdv, saltImplVertAdv, momImplVertAdv, |
402 |
& multiDimAdvection, useMultiDimAdvec, |
& multiDimAdvection, useMultiDimAdvec, |
403 |
& momDissip_In_AB, doAB_onGtGs, |
& momDissip_In_AB, doAB_onGtGs, |
404 |
& balanceEmPmR, balanceQnet, balancePrintMean, |
& balanceEmPmR, balanceQnet, balancePrintMean, |
405 |
|
& balanceThetaClimRelax, balanceSaltClimRelax, |
406 |
& doThetaClimRelax, doSaltClimRelax, |
& doThetaClimRelax, doSaltClimRelax, |
407 |
& allowFreezing, useOldFreezing, |
& allowFreezing, useOldFreezing, |
408 |
& periodicExternalForcing, |
& periodicExternalForcing, |
412 |
& writePickupAtEnd, |
& writePickupAtEnd, |
413 |
& timeave_mdsio, snapshot_mdsio, monitor_stdio, |
& timeave_mdsio, snapshot_mdsio, monitor_stdio, |
414 |
& outputTypesInclusive, dumpInitAndLast, |
& outputTypesInclusive, dumpInitAndLast, |
415 |
& debugMode, printDomain, |
& printDomain |
|
& inAdMode, inAdTrue, inAdFalse, inAdExact |
|
416 |
|
|
417 |
LOGICAL fluidIsAir |
LOGICAL fluidIsAir |
418 |
LOGICAL fluidIsWater |
LOGICAL fluidIsWater |
422 |
LOGICAL usingCartesianGrid |
LOGICAL usingCartesianGrid |
423 |
LOGICAL usingSphericalPolarGrid, rotateGrid |
LOGICAL usingSphericalPolarGrid, rotateGrid |
424 |
LOGICAL usingCylindricalGrid |
LOGICAL usingCylindricalGrid |
425 |
LOGICAL usingCurvilinearGrid |
LOGICAL usingCurvilinearGrid, hasWetCSCorners |
426 |
LOGICAL deepAtmosphere |
LOGICAL deepAtmosphere |
427 |
LOGICAL setInterFDr |
LOGICAL setInterFDr |
428 |
LOGICAL setCenterDr |
LOGICAL setCenterDr |
429 |
LOGICAL useNHMTerms |
|
430 |
LOGICAL no_slip_sides |
LOGICAL no_slip_sides |
431 |
LOGICAL no_slip_bottom |
LOGICAL no_slip_bottom |
432 |
|
LOGICAL useSmag3D |
433 |
LOGICAL useFullLeith |
LOGICAL useFullLeith |
434 |
LOGICAL useStrainTensionVisc |
LOGICAL useStrainTensionVisc |
435 |
LOGICAL useAreaViscLength |
LOGICAL useAreaViscLength |
437 |
LOGICAL momAdvection |
LOGICAL momAdvection |
438 |
LOGICAL momForcing |
LOGICAL momForcing |
439 |
LOGICAL momPressureForcing |
LOGICAL momPressureForcing |
440 |
|
LOGICAL metricTerms |
441 |
|
LOGICAL useNHMTerms |
442 |
|
|
443 |
LOGICAL useCoriolis |
LOGICAL useCoriolis |
444 |
|
LOGICAL use3dCoriolis |
445 |
|
LOGICAL useCDscheme |
446 |
LOGICAL vectorInvariantMomentum |
LOGICAL vectorInvariantMomentum |
447 |
|
LOGICAL useEnergyConservingCoriolis |
448 |
|
LOGICAL useJamartWetPoints |
449 |
|
LOGICAL useJamartMomAdv |
450 |
|
LOGICAL upwindVorticity |
451 |
|
LOGICAL highOrderVorticity |
452 |
|
LOGICAL useAbsVorticity |
453 |
|
LOGICAL upwindShear |
454 |
|
LOGICAL momStepping |
455 |
|
LOGICAL calc_wVelocity |
456 |
|
LOGICAL tempStepping |
457 |
|
LOGICAL saltStepping |
458 |
|
LOGICAL addFrictionHeating |
459 |
LOGICAL tempAdvection |
LOGICAL tempAdvection |
460 |
|
LOGICAL tempVertDiff4 |
461 |
LOGICAL tempIsActiveTr |
LOGICAL tempIsActiveTr |
462 |
LOGICAL tempForcing |
LOGICAL tempForcing |
463 |
LOGICAL saltAdvection |
LOGICAL saltAdvection |
464 |
|
LOGICAL saltVertDiff4 |
465 |
LOGICAL saltIsActiveTr |
LOGICAL saltIsActiveTr |
466 |
LOGICAL saltForcing |
LOGICAL saltForcing |
467 |
LOGICAL maskIniTemp |
LOGICAL maskIniTemp |
468 |
LOGICAL maskIniSalt |
LOGICAL maskIniSalt |
469 |
LOGICAL checkIniTemp |
LOGICAL checkIniTemp |
470 |
LOGICAL checkIniSalt |
LOGICAL checkIniSalt |
|
LOGICAL useRealFreshWaterFlux |
|
471 |
LOGICAL useSRCGSolver |
LOGICAL useSRCGSolver |
472 |
LOGICAL rigidLid |
LOGICAL rigidLid |
473 |
LOGICAL implicitFreeSurface |
LOGICAL implicitFreeSurface |
474 |
|
LOGICAL uniformLin_PhiSurf |
475 |
|
LOGICAL uniformFreeSurfLev |
476 |
LOGICAL exactConserv |
LOGICAL exactConserv |
477 |
LOGICAL linFSConserveTr |
LOGICAL linFSConserveTr |
478 |
LOGICAL uniformLin_PhiSurf |
LOGICAL useRealFreshWaterFlux |
479 |
LOGICAL quasiHydrostatic |
LOGICAL quasiHydrostatic |
480 |
LOGICAL nonHydrostatic |
LOGICAL nonHydrostatic |
481 |
LOGICAL use3Dsolver |
LOGICAL use3Dsolver |
482 |
LOGICAL implicitIntGravWave |
LOGICAL implicitIntGravWave |
483 |
LOGICAL staggerTimeStep |
LOGICAL staggerTimeStep |
484 |
LOGICAL momStepping |
LOGICAL doResetHFactors |
|
LOGICAL tempStepping |
|
|
LOGICAL saltStepping |
|
|
LOGICAL metricTerms |
|
|
LOGICAL use3dCoriolis |
|
|
LOGICAL useCDscheme |
|
|
LOGICAL useEnergyConservingCoriolis |
|
|
LOGICAL useJamartWetPoints |
|
|
LOGICAL useJamartMomAdv |
|
|
LOGICAL upwindVorticity |
|
|
LOGICAL highOrderVorticity |
|
|
LOGICAL useAbsVorticity |
|
|
LOGICAL upwindShear |
|
485 |
LOGICAL implicitDiffusion |
LOGICAL implicitDiffusion |
486 |
LOGICAL implicitViscosity |
LOGICAL implicitViscosity |
487 |
LOGICAL tempImplVertAdv |
LOGICAL tempImplVertAdv |
496 |
LOGICAL balancePrintMean |
LOGICAL balancePrintMean |
497 |
LOGICAL doThetaClimRelax |
LOGICAL doThetaClimRelax |
498 |
LOGICAL doSaltClimRelax |
LOGICAL doSaltClimRelax |
499 |
|
LOGICAL balanceThetaClimRelax |
500 |
|
LOGICAL balanceSaltClimRelax |
501 |
LOGICAL allowFreezing |
LOGICAL allowFreezing |
502 |
LOGICAL useOldFreezing |
LOGICAL useOldFreezing |
503 |
LOGICAL periodicExternalForcing |
LOGICAL periodicExternalForcing |
510 |
LOGICAL timeave_mdsio, snapshot_mdsio, monitor_stdio |
LOGICAL timeave_mdsio, snapshot_mdsio, monitor_stdio |
511 |
LOGICAL outputTypesInclusive |
LOGICAL outputTypesInclusive |
512 |
LOGICAL dumpInitAndLast |
LOGICAL dumpInitAndLast |
513 |
LOGICAL debugMode, printDomain |
LOGICAL printDomain |
|
LOGICAL inAdMode, inAdTrue, inAdFalse, inAdExact |
|
514 |
|
|
515 |
C-- COMMON /PARM_R/ "Real" valued parameters used by the model. |
C-- COMMON /PARM_R/ "Real" valued parameters used by the model. |
516 |
C cg2dTargetResidual |
C cg2dTargetResidual |
536 |
C delR :: Vertical grid spacing ( units of r ). |
C delR :: Vertical grid spacing ( units of r ). |
537 |
C delRc :: Vertical grid spacing between cell centers (r unit). |
C delRc :: Vertical grid spacing between cell centers (r unit). |
538 |
C delX :: Separation between cell faces (m) or (deg), depending |
C delX :: Separation between cell faces (m) or (deg), depending |
539 |
C delY on input flags. |
C delY on input flags. Note: moved to header file SET_GRID.h |
540 |
C xgOrigin :: Origin of the X-axis (Cartesian Grid) / Longitude of Western |
C xgOrigin :: Origin of the X-axis (Cartesian Grid) / Longitude of Western |
541 |
C :: most cell face (Lat-Lon grid) (Note: this is an "inert" |
C :: most cell face (Lat-Lon grid) (Note: this is an "inert" |
542 |
C :: parameter but it makes geographical references simple.) |
C :: parameter but it makes geographical references simple.) |
546 |
C recip_gravity and its inverse |
C recip_gravity and its inverse |
547 |
C gBaro :: Accel. due to gravity used in barotropic equation ( m/s^2 ) |
C gBaro :: Accel. due to gravity used in barotropic equation ( m/s^2 ) |
548 |
C rhoNil :: Reference density for the linear equation of state |
C rhoNil :: Reference density for the linear equation of state |
549 |
C rhoConst :: Vertically constant reference density |
C rhoConst :: Vertically constant reference density (Boussinesq) |
550 |
C rhoFacC :: normalized (by rhoConst) reference density at cell-Center |
C rhoFacC :: normalized (by rhoConst) reference density at cell-Center |
551 |
C rhoFacF :: normalized (by rhoConst) reference density at cell-interFace |
C rhoFacF :: normalized (by rhoConst) reference density at cell-interFace |
552 |
C rhoConstFresh :: Constant reference density for fresh water (rain) |
C rhoConstFresh :: Constant reference density for fresh water (rain) |
554 |
C tRef :: reference vertical profile for potential temperature |
C tRef :: reference vertical profile for potential temperature |
555 |
C sRef :: reference vertical profile for salinity/specific humidity |
C sRef :: reference vertical profile for salinity/specific humidity |
556 |
C phiRef :: reference potential (pressure/rho, geopotential) profile |
C phiRef :: reference potential (pressure/rho, geopotential) profile |
557 |
C dBdrRef :: vertical gradient of reference boyancy [(m/s/r)^2)]: |
C dBdrRef :: vertical gradient of reference buoyancy [(m/s/r)^2]: |
558 |
C :: z-coord: = N^2_ref = Brunt-Vaissala frequency [s^-2] |
C :: z-coord: = N^2_ref = Brunt-Vaissala frequency [s^-2] |
559 |
C :: p-coord: = -(d.alpha/dp)_ref [(m^2.s/kg)^2] |
C :: p-coord: = -(d.alpha/dp)_ref [(m^2.s/kg)^2] |
560 |
C rVel2wUnit :: units conversion factor (Non-Hydrostatic code), |
C rVel2wUnit :: units conversion factor (Non-Hydrostatic code), |
587 |
C momentum laterally ( m^2/s ) |
C momentum laterally ( m^2/s ) |
588 |
C viscAhW :: Eddy viscosity coeff. for mixing of vertical |
C viscAhW :: Eddy viscosity coeff. for mixing of vertical |
589 |
C momentum laterally, no effect for hydrostatic |
C momentum laterally, no effect for hydrostatic |
590 |
C model, defaults to viscAh if unset ( m^2/s ) |
C model, defaults to viscAhD if unset ( m^2/s ) |
591 |
C Not used if variable horiz. viscosity is used. |
C Not used if variable horiz. viscosity is used. |
592 |
C viscA4 :: Biharmonic viscosity coeff. for mixing of |
C viscA4 :: Biharmonic viscosity coeff. for mixing of |
593 |
C momentum laterally ( m^4/s ) |
C momentum laterally ( m^4/s ) |
594 |
C viscA4W :: Biharmonic viscosity coeff. for mixing of vertical |
C viscA4W :: Biharmonic viscosity coeff. for mixing of vertical |
595 |
C momentum laterally, no effect for hydrostatic |
C momentum laterally, no effect for hydrostatic |
596 |
C model, defaults to viscA4 if unset ( m^2/s ) |
C model, defaults to viscA4D if unset ( m^2/s ) |
597 |
C Not used if variable horiz. viscosity is used. |
C Not used if variable horiz. viscosity is used. |
598 |
C viscAhD :: Eddy viscosity coeff. for mixing of momentum laterally |
C viscAhD :: Eddy viscosity coeff. for mixing of momentum laterally |
599 |
C (act on Divergence part) ( m^2/s ) |
C (act on Divergence part) ( m^2/s ) |
603 |
C (act on Divergence part) ( m^4/s ) |
C (act on Divergence part) ( m^4/s ) |
604 |
C viscA4Z :: Biharmonic viscosity coeff. for mixing of momentum laterally |
C viscA4Z :: Biharmonic viscosity coeff. for mixing of momentum laterally |
605 |
C (act on Vorticity part) ( m^4/s ) |
C (act on Vorticity part) ( m^4/s ) |
606 |
|
C smag3D_coeff :: Isotropic 3-D Smagorinsky coefficient (-) |
607 |
C viscC2leith :: Leith non-dimensional viscosity factor (grad(vort)) |
C viscC2leith :: Leith non-dimensional viscosity factor (grad(vort)) |
608 |
C viscC2leithD :: Modified Leith non-dimensional visc. factor (grad(div)) |
C viscC2leithD :: Modified Leith non-dimensional visc. factor (grad(div)) |
609 |
C viscC4leith :: Leith non-dimensional viscosity factor (grad(vort)) |
C viscC4leith :: Leith non-dimensional viscosity factor (grad(vort)) |
626 |
C viscA4GridMin:: in terms of non-dimensional grid-size dependent viscosity |
C viscA4GridMin:: in terms of non-dimensional grid-size dependent viscosity |
627 |
C diffKhT :: Laplacian diffusion coeff. for mixing of |
C diffKhT :: Laplacian diffusion coeff. for mixing of |
628 |
C heat laterally ( m^2/s ) |
C heat laterally ( m^2/s ) |
|
C diffKrNrT :: vertical profile of Laplacian diffusion coeff. |
|
|
C for mixing of heat vertically ( units of r^2/s ) |
|
629 |
C diffK4T :: Biharmonic diffusion coeff. for mixing of |
C diffK4T :: Biharmonic diffusion coeff. for mixing of |
630 |
C heat laterally ( m^4/s ) |
C heat laterally ( m^4/s ) |
631 |
|
C diffKrNrT :: vertical profile of Laplacian diffusion coeff. |
632 |
|
C for mixing of heat vertically ( units of r^2/s ) |
633 |
|
C diffKr4T :: vertical profile of Biharmonic diffusion coeff. |
634 |
|
C for mixing of heat vertically ( units of r^4/s ) |
635 |
C diffKhS :: Laplacian diffusion coeff. for mixing of |
C diffKhS :: Laplacian diffusion coeff. for mixing of |
636 |
C salt laterally ( m^2/s ) |
C salt laterally ( m^2/s ) |
|
C diffKrNrS :: vertical profile of Laplacian diffusion coeff. |
|
|
C for mixing of salt vertically ( units of r^2/s ), |
|
637 |
C diffK4S :: Biharmonic diffusion coeff. for mixing of |
C diffK4S :: Biharmonic diffusion coeff. for mixing of |
638 |
C salt laterally ( m^4/s ) |
C salt laterally ( m^4/s ) |
639 |
|
C diffKrNrS :: vertical profile of Laplacian diffusion coeff. |
640 |
|
C for mixing of salt vertically ( units of r^2/s ), |
641 |
|
C diffKr4S :: vertical profile of Biharmonic diffusion coeff. |
642 |
|
C for mixing of salt vertically ( units of r^4/s ) |
643 |
C diffKrBL79surf :: T/S surface diffusivity (m^2/s) Bryan and Lewis, 1979 |
C diffKrBL79surf :: T/S surface diffusivity (m^2/s) Bryan and Lewis, 1979 |
644 |
C diffKrBL79deep :: T/S deep diffusivity (m^2/s) Bryan and Lewis, 1979 |
C diffKrBL79deep :: T/S deep diffusivity (m^2/s) Bryan and Lewis, 1979 |
645 |
C diffKrBL79scl :: depth scale for arctan fn (m) Bryan and Lewis, 1979 |
C diffKrBL79scl :: depth scale for arctan fn (m) Bryan and Lewis, 1979 |
659 |
C are referenced to this clock. ( s ) |
C are referenced to this clock. ( s ) |
660 |
C deltaTMom :: Timestep for momemtum equations ( s ) |
C deltaTMom :: Timestep for momemtum equations ( s ) |
661 |
C dTtracerLev :: Timestep for tracer equations ( s ), function of level k |
C dTtracerLev :: Timestep for tracer equations ( s ), function of level k |
662 |
C deltaTfreesurf :: Timestep for free-surface equation ( s ) |
C deltaTFreeSurf :: Timestep for free-surface equation ( s ) |
663 |
C freesurfFac :: Parameter to turn implicit free surface term on or off |
C freeSurfFac :: Parameter to turn implicit free surface term on or off |
664 |
C freesurfac = 1. uses implicit free surface |
C freeSurFac = 1. uses implicit free surface |
665 |
C freesurfac = 0. uses rigid lid |
C freeSurFac = 0. uses rigid lid |
666 |
C abEps :: Adams-Bashforth-2 stabilizing weight |
C abEps :: Adams-Bashforth-2 stabilizing weight |
667 |
C alph_AB :: Adams-Bashforth-3 primary factor |
C alph_AB :: Adams-Bashforth-3 primary factor |
668 |
C beta_AB :: Adams-Bashforth-3 secondary factor |
C beta_AB :: Adams-Bashforth-3 secondary factor |
687 |
C chkPtFreq :: Frequency of rolling check pointing ( s ). |
C chkPtFreq :: Frequency of rolling check pointing ( s ). |
688 |
C pChkPtFreq :: Frequency of permanent check pointing ( s ). |
C pChkPtFreq :: Frequency of permanent check pointing ( s ). |
689 |
C dumpFreq :: Frequency with which model state is written to |
C dumpFreq :: Frequency with which model state is written to |
690 |
C post-processing files ( s ). |
C post-processing files ( s ). |
691 |
C diagFreq :: Frequency with which model writes diagnostic output |
C diagFreq :: Frequency with which model writes diagnostic output |
692 |
C of intermediate quantities. |
C of intermediate quantities. |
693 |
C afFacMom :: Advection of momentum term tracer parameter |
C afFacMom :: Advection of momentum term tracer parameter |
694 |
C vfFacMom :: Momentum viscosity tracer parameter |
C vfFacMom :: Momentum viscosity tracer parameter |
695 |
C pfFacMom :: Momentum pressure forcing tracer parameter |
C pfFacMom :: Momentum pressure forcing tracer parameter |
738 |
C (affects myabs, mymin, mymax) |
C (affects myabs, mymin, mymax) |
739 |
C nh_Am2 :: scales the non-hydrostatic terms and changes internal scales |
C nh_Am2 :: scales the non-hydrostatic terms and changes internal scales |
740 |
C (i.e. allows convection at different Rayleigh numbers) |
C (i.e. allows convection at different Rayleigh numbers) |
741 |
|
C tCylIn :: Temperature of the cylinder inner boundary |
742 |
|
C tCylOut :: Temperature of the cylinder outer boundary |
743 |
C phiEuler :: Euler angle, rotation about original z-axis |
C phiEuler :: Euler angle, rotation about original z-axis |
744 |
C thetaEuler :: Euler angle, rotation about new x-axis |
C thetaEuler :: Euler angle, rotation about new x-axis |
745 |
C psiEuler :: Euler angle, rotation about new z-axis |
C psiEuler :: Euler angle, rotation about new z-axis |
746 |
COMMON /PARM_R/ cg2dTargetResidual, cg2dTargetResWunit, |
COMMON /PARM_R/ cg2dTargetResidual, cg2dTargetResWunit, |
747 |
& cg2dpcOffDFac, cg3dTargetResidual, |
& cg2dpcOffDFac, cg3dTargetResidual, |
748 |
& delR, delRc, delX, delY, xgOrigin, ygOrigin, |
& delR, delRc, xgOrigin, ygOrigin, |
749 |
& deltaT, deltaTmom, dTtracerLev, deltaTfreesurf, deltaTClock, |
& deltaT, deltaTMom, dTtracerLev, deltaTFreeSurf, deltaTClock, |
750 |
& abEps, alph_AB, beta_AB, |
& abEps, alph_AB, beta_AB, |
751 |
& rSphere, recip_rSphere, radius_fromHorizGrid, |
& rSphere, recip_rSphere, radius_fromHorizGrid, |
752 |
& f0, beta, fPrime, omega, rotationPeriod, |
& f0, beta, fPrime, omega, rotationPeriod, |
753 |
& viscFacAdj, viscAh, viscAhW, viscAhMax, |
& viscFacAdj, viscAh, viscAhW, smag3D_coeff, |
754 |
& viscAhGrid, viscAhGridMax, viscAhGridMin, |
& viscAhMax, viscAhGrid, viscAhGridMax, viscAhGridMin, |
755 |
& viscC2leith, viscC2leithD, |
& viscC2leith, viscC2leithD, |
756 |
& viscC2smag, viscC4smag, |
& viscC2smag, viscC4smag, |
757 |
& viscAhD, viscAhZ, viscA4D, viscA4Z, |
& viscAhD, viscAhZ, viscA4D, viscA4Z, |
759 |
& viscA4Grid, viscA4GridMax, viscA4GridMin, |
& viscA4Grid, viscA4GridMax, viscA4GridMin, |
760 |
& viscAhReMax, viscA4ReMax, |
& viscAhReMax, viscA4ReMax, |
761 |
& viscC4leith, viscC4leithD, viscArNr, |
& viscC4leith, viscC4leithD, viscArNr, |
762 |
& diffKhT, diffK4T, diffKrNrT, |
& diffKhT, diffK4T, diffKrNrT, diffKr4T, |
763 |
& diffKhS, diffK4S, diffKrNrS, |
& diffKhS, diffK4S, diffKrNrS, diffKr4S, |
764 |
& diffKrBL79surf, diffKrBL79deep, diffKrBL79scl, diffKrBL79Ho, |
& diffKrBL79surf, diffKrBL79deep, diffKrBL79scl, diffKrBL79Ho, |
765 |
& BL79LatVary, |
& BL79LatVary, |
766 |
& diffKrBLEQsurf, diffKrBLEQdeep, diffKrBLEQscl, diffKrBLEQHo, |
& diffKrBLEQsurf, diffKrBLEQdeep, diffKrBLEQscl, diffKrBLEQHo, |
768 |
& freeSurfFac, implicSurfPress, implicDiv2Dflow, implicitNHPress, |
& freeSurfFac, implicSurfPress, implicDiv2Dflow, implicitNHPress, |
769 |
& hFacMin, hFacMinDz, hFacInf, hFacSup, |
& hFacMin, hFacMinDz, hFacInf, hFacSup, |
770 |
& gravity, recip_gravity, gBaro, |
& gravity, recip_gravity, gBaro, |
771 |
& rhonil, recip_rhonil, rhoConst, recip_rhoConst, |
& rhoNil, rhoConst, recip_rhoConst, |
772 |
& rhoFacC, recip_rhoFacC, rhoFacF, recip_rhoFacF, |
& rhoFacC, recip_rhoFacC, rhoFacF, recip_rhoFacF, |
773 |
& rhoConstFresh, rho1Ref, tRef, sRef, phiRef, dBdrRef, |
& rhoConstFresh, rho1Ref, tRef, sRef, phiRef, dBdrRef, |
774 |
& rVel2wUnit, wUnit2rVel, mass2rUnit, rUnit2mass, |
& rVel2wUnit, wUnit2rVel, mass2rUnit, rUnit2mass, |
794 |
_RL cg2dpcOffDFac |
_RL cg2dpcOffDFac |
795 |
_RL delR(Nr) |
_RL delR(Nr) |
796 |
_RL delRc(Nr+1) |
_RL delRc(Nr+1) |
|
_RL delX(Nx) |
|
|
_RL delY(Ny) |
|
797 |
_RL xgOrigin |
_RL xgOrigin |
798 |
_RL ygOrigin |
_RL ygOrigin |
799 |
_RL deltaT |
_RL deltaT |
800 |
_RL deltaTClock |
_RL deltaTClock |
801 |
_RL deltaTmom |
_RL deltaTMom |
802 |
_RL dTtracerLev(Nr) |
_RL dTtracerLev(Nr) |
803 |
_RL deltaTfreesurf |
_RL deltaTFreeSurf |
804 |
_RL abEps, alph_AB, beta_AB |
_RL abEps, alph_AB, beta_AB |
805 |
_RL rSphere |
_RL rSphere |
806 |
_RL recip_rSphere |
_RL recip_rSphere |
826 |
_RL viscAhW |
_RL viscAhW |
827 |
_RL viscAhD |
_RL viscAhD |
828 |
_RL viscAhZ |
_RL viscAhZ |
829 |
|
_RL smag3D_coeff |
830 |
_RL viscAhMax |
_RL viscAhMax |
831 |
_RL viscAhReMax |
_RL viscAhReMax |
832 |
_RL viscAhGrid, viscAhGridMax, viscAhGridMin |
_RL viscAhGrid, viscAhGridMax, viscAhGridMin |
844 |
_RL viscC4leithD |
_RL viscC4leithD |
845 |
_RL viscC4smag |
_RL viscC4smag |
846 |
_RL diffKhT |
_RL diffKhT |
|
_RL diffKrNrT(Nr) |
|
847 |
_RL diffK4T |
_RL diffK4T |
848 |
|
_RL diffKrNrT(Nr) |
849 |
|
_RL diffKr4T(Nr) |
850 |
_RL diffKhS |
_RL diffKhS |
|
_RL diffKrNrS(Nr) |
|
851 |
_RL diffK4S |
_RL diffK4S |
852 |
|
_RL diffKrNrS(Nr) |
853 |
|
_RL diffKr4S(Nr) |
854 |
_RL diffKrBL79surf |
_RL diffKrBL79surf |
855 |
_RL diffKrBL79deep |
_RL diffKrBL79deep |
856 |
_RL diffKrBL79scl |
_RL diffKrBL79scl |
864 |
_RL gravity |
_RL gravity |
865 |
_RL recip_gravity |
_RL recip_gravity |
866 |
_RL gBaro |
_RL gBaro |
867 |
_RL rhonil, recip_rhonil |
_RL rhoNil |
868 |
_RL rhoConst, recip_rhoConst |
_RL rhoConst, recip_rhoConst |
869 |
_RL rhoFacC(Nr), recip_rhoFacC(Nr) |
_RL rhoFacC(Nr), recip_rhoFacC(Nr) |
870 |
_RL rhoFacF(Nr+1), recip_rhoFacF(Nr+1) |
_RL rhoFacF(Nr+1), recip_rhoFacF(Nr+1) |
917 |
_RL bottomDragQuadratic |
_RL bottomDragQuadratic |
918 |
_RL smoothAbsFuncRange |
_RL smoothAbsFuncRange |
919 |
_RL nh_Am2 |
_RL nh_Am2 |
920 |
_RL tCylIn |
_RL tCylIn, tCylOut |
|
_RL tCylOut |
|
921 |
_RL phiEuler, thetaEuler, psiEuler |
_RL phiEuler, thetaEuler, psiEuler |
922 |
|
|
923 |
C-- COMMON /PARM_A/ Thermodynamics constants ? |
C-- COMMON /PARM_A/ Thermodynamics constants ? |
957 |
LOGICAL useKPP |
LOGICAL useKPP |
958 |
LOGICAL useGMRedi |
LOGICAL useGMRedi |
959 |
LOGICAL useDOWN_SLOPE |
LOGICAL useDOWN_SLOPE |
960 |
|
LOGICAL useBBL |
961 |
LOGICAL useCAL |
LOGICAL useCAL |
962 |
LOGICAL useEXF |
LOGICAL useEXF |
963 |
LOGICAL useBulkForce |
LOGICAL useBulkForce |
965 |
LOGICAL useCheapAML |
LOGICAL useCheapAML |
966 |
LOGICAL useGrdchk |
LOGICAL useGrdchk |
967 |
LOGICAL useSMOOTH |
LOGICAL useSMOOTH |
968 |
|
LOGICAL usePROFILES |
969 |
LOGICAL useECCO |
LOGICAL useECCO |
970 |
LOGICAL useSBO |
LOGICAL useSBO |
971 |
LOGICAL useFLT |
LOGICAL useFLT |
974 |
LOGICAL useRBCS |
LOGICAL useRBCS |
975 |
LOGICAL useOffLine |
LOGICAL useOffLine |
976 |
LOGICAL useMATRIX |
LOGICAL useMATRIX |
977 |
|
LOGICAL useFRAZIL |
978 |
LOGICAL useSEAICE |
LOGICAL useSEAICE |
979 |
LOGICAL useSALT_PLUME |
LOGICAL useSALT_PLUME |
980 |
LOGICAL useShelfIce |
LOGICAL useShelfIce |
981 |
|
LOGICAL useStreamIce |
982 |
LOGICAL useICEFRONT |
LOGICAL useICEFRONT |
983 |
LOGICAL useThSIce |
LOGICAL useThSIce |
984 |
|
LOGICAL useLand |
985 |
LOGICAL useATM2d |
LOGICAL useATM2d |
986 |
LOGICAL useAIM |
LOGICAL useAIM |
987 |
LOGICAL useLand |
LOGICAL useAtm_Phys |
988 |
LOGICAL useFizhi |
LOGICAL useFizhi |
989 |
LOGICAL useGridAlt |
LOGICAL useGridAlt |
990 |
LOGICAL useDiagnostics |
LOGICAL useDiagnostics |
997 |
COMMON /PARM_PACKAGES/ |
COMMON /PARM_PACKAGES/ |
998 |
& useGAD, useOBCS, useSHAP_FILT, useZONAL_FILT, |
& useGAD, useOBCS, useSHAP_FILT, useZONAL_FILT, |
999 |
& useOPPS, usePP81, useMY82, useGGL90, useKPP, |
& useOPPS, usePP81, useMY82, useGGL90, useKPP, |
1000 |
& useGMRedi, useDOWN_SLOPE, |
& useGMRedi, useBBL, useDOWN_SLOPE, |
1001 |
& useCAL, useEXF, useBulkForce, useEBM, useCheapAML, |
& useCAL, useEXF, useBulkForce, useEBM, useCheapAML, |
1002 |
& useGrdchk, useSMOOTH, useECCO, useSBO, useFLT, |
& useGrdchk,useSMOOTH,usePROFILES,useECCO,useSBO, useFLT, |
1003 |
& usePTRACERS, useGCHEM, useRBCS, useOffLine, useMATRIX, |
& usePTRACERS, useGCHEM, useRBCS, useOffLine, useMATRIX, |
1004 |
& useSEAICE, useSALT_PLUME, useShelfIce, |
& useFRAZIL, useSEAICE, useSALT_PLUME, useShelfIce, |
1005 |
& useICEFRONT, useThSIce, |
& useStreamIce, useICEFRONT, useThSIce, useLand, |
1006 |
& useATM2D, useAIM, useLand, useFizhi, useGridAlt, |
& useATM2D, useAIM, useAtm_Phys, useFizhi, useGridAlt, |
1007 |
& useDiagnostics, useREGRID, useLayers, useMNC, |
& useDiagnostics, useREGRID, useLayers, useMNC, |
1008 |
& useRunClock, useEMBED_FILES, |
& useRunClock, useEMBED_FILES, |
1009 |
& useMYPACKAGE |
& useMYPACKAGE |