222 |
PARAMETER(debLevB=2) |
PARAMETER(debLevB=2) |
223 |
|
|
224 |
C-- COMMON /PARM_L/ Logical valued parameters used by the model. |
C-- COMMON /PARM_L/ Logical valued parameters used by the model. |
225 |
|
C- Coordinate + Grid params: |
226 |
|
C fluidIsAir :: Set to indicate that the fluid major constituent |
227 |
|
C is air |
228 |
|
C fluidIsWater :: Set to indicate that the fluid major constituent |
229 |
|
C is water |
230 |
|
C usingPCoords :: Set to indicate that we are working in a pressure |
231 |
|
C type coordinate (p or p*). |
232 |
|
C usingZCoords :: Set to indicate that we are working in a height |
233 |
|
C type coordinate (z or z*) |
234 |
|
C useDynP_inEos_Zc :: use the dynamical pressure in EOS (with Z-coord.) |
235 |
|
C this requires specific code for restart & exchange |
236 |
C usingCartesianGrid :: If TRUE grid generation will be in a cartesian |
C usingCartesianGrid :: If TRUE grid generation will be in a cartesian |
237 |
C coordinate frame. |
C coordinate frame. |
238 |
C usingSphericalPolarGrid :: If TRUE grid generation will be in a |
C usingSphericalPolarGrid :: If TRUE grid generation will be in a |
239 |
C spherical polar frame. |
C spherical polar frame. |
240 |
C usingCylindricalGrid :: If TRUE grid generation will be Cylindrical |
C rotateGrid :: rotate grid coordinates to geographical coordinates |
241 |
|
C according to Euler angles phiEuler, thetaEuler, psiEuler |
242 |
C usingCurvilinearGrid :: If TRUE, use a curvilinear grid (to be provided) |
C usingCurvilinearGrid :: If TRUE, use a curvilinear grid (to be provided) |
243 |
|
C usingCylindricalGrid :: If TRUE grid generation will be Cylindrical |
244 |
C deepAtmosphere :: deep model (drop the shallow-atmosphere approximation) |
C deepAtmosphere :: deep model (drop the shallow-atmosphere approximation) |
245 |
C no_slip_sides :: Impose "no-slip" at lateral boundaries. |
C setInterFDr :: set Interface depth (put cell-Center at the middle) |
246 |
|
C setCenterDr :: set cell-Center depth (put Interface at the middle) |
247 |
|
C- Momentum params: |
248 |
|
C no_slip_sides :: Impose "no-slip" at lateral boundaries. |
249 |
C no_slip_bottom :: Impose "no-slip" at bottom boundary. |
C no_slip_bottom :: Impose "no-slip" at bottom boundary. |
250 |
|
C useFullLeith :: Set to true to use full Leith viscosity(may be unstable |
251 |
|
C on irregular grids) |
252 |
|
C useStrainTensionVisc:: Set to true to use Strain-Tension viscous terms |
253 |
|
C useAreaViscLength :: Set to true to use old scaling for viscous lengths, |
254 |
|
C e.g., L2=Raz. May be preferable for cube sphere. |
255 |
C momViscosity :: Flag which turns momentum friction terms on and off. |
C momViscosity :: Flag which turns momentum friction terms on and off. |
256 |
C momAdvection :: Flag which turns advection of momentum on and off. |
C momAdvection :: Flag which turns advection of momentum on and off. |
257 |
C momForcing :: Flag which turns external forcing of momentum on |
C momForcing :: Flag which turns external forcing of momentum on |
258 |
C and off. |
C and off. |
259 |
C momPressureForcing :: Flag which turns pressure term in momentum equation |
C momPressureForcing :: Flag which turns pressure term in momentum equation |
260 |
C on and off. |
C on and off. |
261 |
C metricTerms :: Flag which turns metric terms on or off. |
C metricTerms :: Flag which turns metric terms on or off. |
262 |
C useNHMTerms :: If TRUE use non-hydrostatic metric terms. |
C useNHMTerms :: If TRUE use non-hydrostatic metric terms. |
263 |
C useCoriolis :: Flag which turns the coriolis terms on and off. |
C useCoriolis :: Flag which turns the coriolis terms on and off. |
264 |
C tempAdvection :: Flag which turns advection of temperature on |
C use3dCoriolis :: Turns the 3-D coriolis terms (in Omega.cos Phi) on - off |
265 |
C and off. |
C useConstantF :: Coriolis parameter set to f0 |
266 |
C tempForcing :: Flag which turns external forcing of temperature on |
C useBetaPlaneF :: Coriolis parameter set to f0 + beta.y |
267 |
C and off. |
C useSphereF :: Coriolis parameter set to 2.omega.sin(phi) |
268 |
C saltAdvection :: Flag which turns advection of salinity on |
C useCDscheme :: use CD-scheme to calculate Coriolis terms. |
269 |
C and off. |
C vectorInvariantMomentum :: use Vector-Invariant form (mom_vecinv package) |
270 |
C saltForcing :: Flag which turns external forcing of salinity on |
C (default = F = use mom_fluxform package) |
271 |
C and off. |
C useJamartWetPoints :: Use wet-point method for Coriolis (Jamart & Ozer 1986) |
272 |
|
C useJamartMomAdv :: Use wet-point method for V.I. non-linear term |
273 |
|
C upwindVorticity :: bias interpolation of vorticity in the Coriolis term |
274 |
|
C highOrderVorticity :: use 3rd/4th order interp. of vorticity (V.I., advection) |
275 |
|
C useAbsVorticity :: work with f+zeta in Coriolis terms |
276 |
|
C upwindShear :: use 1rst order upwind interp. (V.I., vertical advection) |
277 |
|
C momStepping :: Turns momentum equation time-stepping off |
278 |
|
C- Temp. & Salt params: |
279 |
|
C tempStepping :: Turns temperature equation time-stepping off |
280 |
|
C saltStepping :: Turns salinity equation time-stepping off |
281 |
|
C tempAdvection :: Flag which turns advection of temperature on and off. |
282 |
|
C tempIsActiveTr :: Pot.Temp. is a dynamically active tracer |
283 |
|
C tempForcing :: Flag which turns external forcing of temperature on |
284 |
|
C and off. |
285 |
|
C saltAdvection :: Flag which turns advection of salinity on and off. |
286 |
|
C saltIsActiveTr :: Salinity is a dynamically active tracer |
287 |
|
C saltForcing :: Flag which turns external forcing of salinity on |
288 |
|
C and off. |
289 |
C useRealFreshWaterFlux :: if True (=Natural BCS), treats P+R-E flux |
C useRealFreshWaterFlux :: if True (=Natural BCS), treats P+R-E flux |
290 |
C as a real Fresh Water (=> changes the Sea Level) |
C as a real Fresh Water (=> changes the Sea Level) |
291 |
C if F, converts P+R-E to salt flux (no SL effect) |
C if F, converts P+R-E to salt flux (no SL effect) |
292 |
C useFullLeith :: Set to true to use full Leith viscosity(may be unstable |
C- Time-stepping params: |
|
C on irregular grids) |
|
|
C useAreaViscLength :: Set to true to use old scaling for viscous |
|
|
C lengths, e.g., L2=Raz. May be preferable for cube sphere. |
|
|
C useStrainTensionVisc:: Set to true to use Strain-Tension viscous terms |
|
293 |
C rigidLid :: Set to true to use rigid lid |
C rigidLid :: Set to true to use rigid lid |
294 |
C implicitFreeSurface :: Set to true to use implicit free surface |
C implicitFreeSurface :: Set to true to use implicit free surface |
295 |
C exactConserv :: Set to true to conserve exactly the total Volume |
C exactConserv :: Set to true to conserve exactly the total Volume |
296 |
C linFSConserveTr :: Set to true to correct source/sink of tracer |
C linFSConserveTr :: Set to true to correct source/sink of tracer |
297 |
C at the surface due to Linear Free Surface |
C at the surface due to Linear Free Surface |
298 |
C uniformLin_PhiSurf :: Set to true to use a uniform Bo_surf in the |
C uniformLin_PhiSurf :: Set to true to use a uniform Bo_surf in the |
299 |
C linear relation Phi_surf = Bo_surf*eta |
C linear relation Phi_surf = Bo_surf*eta |
300 |
C use3Dsolver :: set to true to use 3-D pressure solver |
C quasiHydrostatic :: Using non-hydrostatic terms in hydrostatic algorithm |
301 |
|
C nonHydrostatic :: Using non-hydrostatic algorithm |
302 |
|
C use3Dsolver :: set to true to use 3-D pressure solver |
303 |
C implicitIntGravWave :: treat Internal Gravity Wave implicitly |
C implicitIntGravWave :: treat Internal Gravity Wave implicitly |
304 |
C staggerTimeStep :: enable a Stagger time stepping T,S Rho then U,V |
C staggerTimeStep :: enable a Stagger time stepping U,V (& W) then T,S |
|
C momStepping :: Turns momentum equation time-stepping off |
|
|
C tempStepping :: Turns temperature equation time-stepping off |
|
|
C saltStepping :: Turns salinity equation time-stepping off |
|
|
C useConstantF :: Coriolis parameter set to f0 |
|
|
C useBetaPlaneF :: Coriolis parameter set to f0 + beta.y |
|
|
C useSphereF :: Coriolis parameter set to 2.omega.sin(phi) |
|
|
C use3dCoriolis :: Turns the 3-D coriolis terms (in Omega.cos Phi) on - off |
|
|
C useCDscheme :: use CD-scheme to calculate Coriolis terms. |
|
|
C useJamartWetPoints :: Use wet-point method for Coriolis (Jamart and Ozer, 1986) |
|
|
C useJamartMomAdv :: Use wet-point method for V.I. non-linear term |
|
|
C upwindVorticity :: bias interpolation of vorticity in the Coriolis term |
|
|
C highOrderVorticity :: use 3rd/4th order interp. of vorticity (V.I., advection) |
|
|
C upwindShear :: use 1rst order upwind interp. (V.I., vertical advection) |
|
|
C useAbsVorticity :: work with f+zeta in Coriolis terms |
|
305 |
C implicitDiffusion :: Turns implicit vertical diffusion on |
C implicitDiffusion :: Turns implicit vertical diffusion on |
306 |
C implicitViscosity :: Turns implicit vertical viscosity on |
C implicitViscosity :: Turns implicit vertical viscosity on |
307 |
C tempImplVertAdv :: Turns on implicit vertical advection for Temperature |
C tempImplVertAdv :: Turns on implicit vertical advection for Temperature |
313 |
C out off Adams-Bashforth time stepping. |
C out off Adams-Bashforth time stepping. |
314 |
C doAB_onGtGs :: if the Adams-Bashforth time stepping is used, always |
C doAB_onGtGs :: if the Adams-Bashforth time stepping is used, always |
315 |
C apply AB on tracer tendencies (rather than on Tracer) |
C apply AB on tracer tendencies (rather than on Tracer) |
316 |
C pickupStrictlyMatch :: check and stop if pickup-file do not stricly match |
C- Other forcing params - |
317 |
C startFromPickupAB2 :: with AB-3 code, start from an AB-2 pickup |
C balanceEmPmR :: substract global mean of EmPmR at every time step |
318 |
C usePickupBeforeC54 :: start from old-pickup files, generated with code from |
C balanceQnet :: substract global mean of Qnet at every time step |
319 |
C before checkpoint-54a, Jul 06, 2004. |
C balancePrintMean:: print substracted global means to STDOUT |
320 |
C doThetaClimRelax :: Set true if relaxation to temperature |
C doThetaClimRelax :: Set true if relaxation to temperature |
321 |
C climatology is required. |
C climatology is required. |
322 |
C doSaltClimRelax :: Set true if relaxation to salinity |
C doSaltClimRelax :: Set true if relaxation to salinity |
323 |
C climatology is required. |
C climatology is required. |
324 |
|
C allowFreezing :: Allows surface water to freeze and form ice |
325 |
|
C useOldFreezing :: use the old version (before checkpoint52a_pre, 2003-11-12) |
326 |
C periodicExternalForcing :: Set true if forcing is time-dependant |
C periodicExternalForcing :: Set true if forcing is time-dependant |
327 |
C usingPCoords :: Set to indicate that we are working in a pressure |
C- I/O parameters - |
|
C type coordinate (p or p*). |
|
|
C usingZCoords :: Set to indicate that we are working in a height |
|
|
C type coordinate (z or z*) |
|
|
C fluidIsAir :: Set to indicate that the fluid major constituent |
|
|
C is air |
|
|
C fluidIsWater :: Set to indicate that the fluid major constituent |
|
|
C is water |
|
|
C useDynP_inEos_Zc :: use the dynamical pressure in EOS (with Z-coord.) |
|
|
C this requires specific code for restart & exchange |
|
|
C setInterFDr :: set Interface depth (put cell-Center at the middle) |
|
|
C setCenterDr :: set cell-Center depth (put Interface at the middle) |
|
|
C nonHydrostatic :: Using non-hydrostatic terms |
|
|
C quasiHydrostatic :: Using non-hydrostatic terms in hydrostatic algorithm |
|
328 |
C globalFiles :: Selects between "global" and "tiled" files |
C globalFiles :: Selects between "global" and "tiled" files |
329 |
C useSingleCpuIO :: On SGI platforms, option globalFiles is either |
C useSingleCpuIO :: On SGI platforms, option globalFiles is either |
330 |
C slow (f77) or does not work (f90). When |
C slow (f77) or does not work (f90). When |
331 |
C useSingleCpuIO is set, mdsio_writefield.F |
C useSingleCpuIO is set, mdsio_writefield.F |
332 |
C outputs from master mpi process only. |
C outputs from master mpi process only. |
333 |
C allowFreezing :: Allows surface water to freeze and form ice |
C pickupStrictlyMatch :: check and stop if pickup-file do not stricly match |
334 |
C useOldFreezing :: use the old version (before checkpoint52a_pre, 2003-11-12) |
C startFromPickupAB2 :: with AB-3 code, start from an AB-2 pickup |
335 |
|
C usePickupBeforeC54 :: start from old-pickup files, generated with code from |
336 |
|
C before checkpoint-54a, Jul 06, 2004. |
337 |
C pickup_write_mdsio :: use mdsio to write pickups |
C pickup_write_mdsio :: use mdsio to write pickups |
338 |
C pickup_read_mdsio :: use mdsio to read pickups |
C pickup_read_mdsio :: use mdsio to read pickups |
339 |
C pickup_write_immed :: echo the pickup immediately (for conversion) |
C pickup_write_immed :: echo the pickup immediately (for conversion) |
343 |
C monitor_stdio :: use stdio for monitor output |
C monitor_stdio :: use stdio for monitor output |
344 |
C dumpInitAndLast :: dumps model state to files at Initial (nIter0) |
C dumpInitAndLast :: dumps model state to files at Initial (nIter0) |
345 |
C & Last iteration, in addition multiple of dumpFreq iter. |
C & Last iteration, in addition multiple of dumpFreq iter. |
|
C balanceEmPmR :: substract global mean of EmPmR at every time step |
|
|
C balanceQnet :: substract global mean of Qnet at every time step |
|
|
C balancePrintMean:: print substracted global means to STDOUT |
|
|
C rotateGrid :: rotate grid coordinates to geographical coordinates |
|
|
C according to Euler angles phiEuler, thetaEuler, psiEuler |
|
346 |
|
|
347 |
COMMON /PARM_L/ usingCartesianGrid, usingSphericalPolarGrid, |
COMMON /PARM_L/ |
348 |
|
& fluidIsAir, fluidIsWater, |
349 |
|
& usingPCoords, usingZCoords, useDynP_inEos_Zc, |
350 |
|
& usingCartesianGrid, usingSphericalPolarGrid, rotateGrid, |
351 |
& usingCurvilinearGrid, usingCylindricalGrid, |
& usingCurvilinearGrid, usingCylindricalGrid, |
352 |
& deepAtmosphere, setInterFDr, setCenterDr, |
& deepAtmosphere, setInterFDr, setCenterDr, |
353 |
& no_slip_sides,no_slip_bottom, |
& no_slip_sides, no_slip_bottom, |
354 |
& momViscosity, momAdvection, momForcing, useCoriolis, |
& useFullLeith, useStrainTensionVisc, useAreaViscLength, |
355 |
& momPressureForcing, vectorInvariantMomentum, |
& momViscosity, momAdvection, momForcing, |
356 |
& tempAdvection, tempForcing, |
& momPressureForcing, metricTerms, useNHMTerms, |
357 |
& saltAdvection, saltForcing, |
& useCoriolis, use3dCoriolis, |
358 |
|
& useConstantF, useBetaPlaneF, useSphereF, |
359 |
|
& useCDscheme, vectorInvariantMomentum, |
360 |
|
& useEnergyConservingCoriolis, useJamartWetPoints, useJamartMomAdv, |
361 |
|
& upwindVorticity, highOrderVorticity, |
362 |
|
& useAbsVorticity, upwindShear, |
363 |
|
& momStepping, tempStepping, saltStepping, |
364 |
|
& tempAdvection, tempIsActiveTr, tempForcing, |
365 |
|
& saltAdvection, saltIsActiveTr, saltForcing, |
366 |
& useRealFreshWaterFlux, |
& useRealFreshWaterFlux, |
|
& useFullLeith, useStrainTensionVisc, |
|
|
& useAreaViscLength, |
|
367 |
& rigidLid, implicitFreeSurface, exactConserv, linFSConserveTr, |
& rigidLid, implicitFreeSurface, exactConserv, linFSConserveTr, |
368 |
& uniformLin_PhiSurf, |
& uniformLin_PhiSurf, |
369 |
|
& quasiHydrostatic, nonHydrostatic, |
370 |
& use3Dsolver, implicitIntGravWave, staggerTimeStep, |
& use3Dsolver, implicitIntGravWave, staggerTimeStep, |
|
& momStepping, tempStepping, saltStepping, |
|
|
& metricTerms, useNHMTerms, |
|
|
& useConstantF, useBetaPlaneF, useSphereF, use3dCoriolis, |
|
|
& useCDscheme, |
|
|
& useEnergyConservingCoriolis, useJamartWetPoints, useJamartMomAdv, |
|
|
& upwindVorticity, highOrderVorticity, |
|
|
& useAbsVorticity, upwindShear, |
|
371 |
& implicitDiffusion, implicitViscosity, |
& implicitDiffusion, implicitViscosity, |
372 |
& tempImplVertAdv, saltImplVertAdv, momImplVertAdv, |
& tempImplVertAdv, saltImplVertAdv, momImplVertAdv, |
373 |
& multiDimAdvection, useMultiDimAdvec, |
& multiDimAdvection, useMultiDimAdvec, |
374 |
& momDissip_In_AB, doAB_onGtGs, |
& momDissip_In_AB, doAB_onGtGs, |
375 |
& doThetaClimRelax, doSaltClimRelax, doTr1ClimRelax, |
& balanceEmPmR, balanceQnet, balancePrintMean, |
376 |
& periodicExternalForcing, |
& doThetaClimRelax, doSaltClimRelax, |
|
& fluidIsAir, fluidIsWater, |
|
|
& usingPCoords, usingZCoords, useDynP_inEos_Zc, |
|
|
& nonHydrostatic, quasiHydrostatic, globalFiles, useSingleCpuIO, |
|
377 |
& allowFreezing, useOldFreezing, |
& allowFreezing, useOldFreezing, |
378 |
|
& periodicExternalForcing, |
379 |
|
& globalFiles, useSingleCpuIO, |
380 |
& pickupStrictlyMatch, usePickupBeforeC54, startFromPickupAB2, |
& pickupStrictlyMatch, usePickupBeforeC54, startFromPickupAB2, |
381 |
& pickup_read_mdsio, pickup_write_mdsio, pickup_write_immed, |
& pickup_read_mdsio, pickup_write_mdsio, pickup_write_immed, |
382 |
& writePickupAtEnd, |
& writePickupAtEnd, |
383 |
& timeave_mdsio, snapshot_mdsio, monitor_stdio, |
& timeave_mdsio, snapshot_mdsio, monitor_stdio, |
384 |
& outputTypesInclusive, dumpInitAndLast, debugMode, |
& outputTypesInclusive, dumpInitAndLast, debugMode, |
385 |
& inAdMode, inAdTrue, inAdFalse, inAdExact, |
& inAdMode, inAdTrue, inAdFalse, inAdExact |
|
& balanceEmPmR, balanceQnet, balancePrintMean, |
|
|
& rotateGrid |
|
386 |
|
|
387 |
|
LOGICAL fluidIsAir |
388 |
|
LOGICAL fluidIsWater |
389 |
|
LOGICAL usingPCoords |
390 |
|
LOGICAL usingZCoords |
391 |
|
LOGICAL useDynP_inEos_Zc |
392 |
LOGICAL usingCartesianGrid |
LOGICAL usingCartesianGrid |
393 |
LOGICAL usingSphericalPolarGrid |
LOGICAL usingSphericalPolarGrid, rotateGrid |
394 |
LOGICAL usingCylindricalGrid |
LOGICAL usingCylindricalGrid |
395 |
LOGICAL usingCurvilinearGrid |
LOGICAL usingCurvilinearGrid |
396 |
LOGICAL deepAtmosphere |
LOGICAL deepAtmosphere |
418 |
LOGICAL exactConserv |
LOGICAL exactConserv |
419 |
LOGICAL linFSConserveTr |
LOGICAL linFSConserveTr |
420 |
LOGICAL uniformLin_PhiSurf |
LOGICAL uniformLin_PhiSurf |
421 |
|
LOGICAL quasiHydrostatic |
422 |
|
LOGICAL nonHydrostatic |
423 |
LOGICAL use3Dsolver |
LOGICAL use3Dsolver |
424 |
LOGICAL implicitIntGravWave |
LOGICAL implicitIntGravWave |
425 |
LOGICAL staggerTimeStep |
LOGICAL staggerTimeStep |
448 |
LOGICAL useMultiDimAdvec |
LOGICAL useMultiDimAdvec |
449 |
LOGICAL momDissip_In_AB |
LOGICAL momDissip_In_AB |
450 |
LOGICAL doAB_onGtGs |
LOGICAL doAB_onGtGs |
451 |
|
LOGICAL balanceEmPmR |
452 |
|
LOGICAL balanceQnet |
453 |
|
LOGICAL balancePrintMean |
454 |
LOGICAL doThetaClimRelax |
LOGICAL doThetaClimRelax |
455 |
LOGICAL doSaltClimRelax |
LOGICAL doSaltClimRelax |
456 |
LOGICAL doTr1ClimRelax |
LOGICAL allowFreezing |
457 |
|
LOGICAL useOldFreezing |
458 |
LOGICAL periodicExternalForcing |
LOGICAL periodicExternalForcing |
|
LOGICAL fluidIsAir |
|
|
LOGICAL fluidIsWater |
|
|
LOGICAL usingPCoords |
|
|
LOGICAL usingZCoords |
|
|
LOGICAL useDynP_inEos_Zc |
|
|
LOGICAL nonHydrostatic |
|
|
LOGICAL quasiHydrostatic |
|
459 |
LOGICAL globalFiles |
LOGICAL globalFiles |
460 |
LOGICAL useSingleCpuIO |
LOGICAL useSingleCpuIO |
|
LOGICAL allowFreezing |
|
|
LOGICAL useOldFreezing |
|
461 |
LOGICAL pickupStrictlyMatch |
LOGICAL pickupStrictlyMatch |
462 |
LOGICAL usePickupBeforeC54 |
LOGICAL usePickupBeforeC54 |
463 |
LOGICAL startFromPickupAB2 |
LOGICAL startFromPickupAB2 |
|
LOGICAL dumpInitAndLast |
|
|
LOGICAL debugMode |
|
464 |
LOGICAL pickup_read_mdsio, pickup_write_mdsio |
LOGICAL pickup_read_mdsio, pickup_write_mdsio |
465 |
LOGICAL pickup_write_immed, writePickupAtEnd |
LOGICAL pickup_write_immed, writePickupAtEnd |
466 |
LOGICAL timeave_mdsio, snapshot_mdsio, monitor_stdio |
LOGICAL timeave_mdsio, snapshot_mdsio, monitor_stdio |
467 |
LOGICAL outputTypesInclusive |
LOGICAL outputTypesInclusive |
468 |
|
LOGICAL dumpInitAndLast |
469 |
|
LOGICAL debugMode |
470 |
LOGICAL inAdMode, inAdTrue, inAdFalse, inAdExact |
LOGICAL inAdMode, inAdTrue, inAdFalse, inAdExact |
471 |
|
|
|
LOGICAL balanceEmPmR |
|
|
LOGICAL balanceQnet |
|
|
LOGICAL balancePrintMean |
|
|
|
|
|
LOGICAL rotateGrid |
|
|
|
|
472 |
C-- COMMON /PARM_R/ "Real" valued parameters used by the model. |
C-- COMMON /PARM_R/ "Real" valued parameters used by the model. |
473 |
C cg2dTargetResidual |
C cg2dTargetResidual |
474 |
C :: Target residual for cg2d solver; no unit (RHS normalisation) |
C :: Target residual for cg2d solver; no unit (RHS normalisation) |
712 |
& diagFreq, taveFreq, tave_lastIter, monitorFreq, adjMonitorFreq, |
& diagFreq, taveFreq, tave_lastIter, monitorFreq, adjMonitorFreq, |
713 |
& afFacMom, vfFacMom, pfFacMom, cfFacMom, foFacMom, mtFacMom, |
& afFacMom, vfFacMom, pfFacMom, cfFacMom, foFacMom, mtFacMom, |
714 |
& cosPower, cAdjFreq, omega, rotationPeriod, |
& cosPower, cAdjFreq, omega, rotationPeriod, |
715 |
& tauThetaClimRelax, tauSaltClimRelax, |
& tauThetaClimRelax, tauSaltClimRelax, latBandClimRelax, |
|
& tauTr1ClimRelax, lambdaTr1ClimRelax, latBandClimRelax, |
|
716 |
& externForcingCycle, externForcingPeriod, |
& externForcingCycle, externForcingPeriod, |
717 |
& convertFW2Salt, temp_EvPrRn, salt_EvPrRn, |
& convertFW2Salt, temp_EvPrRn, salt_EvPrRn, |
718 |
& hFacMinDr, hFacMinDp, |
& hFacMinDr, hFacMinDp, |
828 |
_RL rotationPeriod |
_RL rotationPeriod |
829 |
_RL tauThetaClimRelax |
_RL tauThetaClimRelax |
830 |
_RL tauSaltClimRelax |
_RL tauSaltClimRelax |
|
_RL tauTr1ClimRelax |
|
|
_RL lambdaTr1ClimRelax |
|
831 |
_RL latBandClimRelax |
_RL latBandClimRelax |
832 |
_RL externForcingCycle |
_RL externForcingCycle |
833 |
_RL externForcingPeriod |
_RL externForcingPeriod |