/[MITgcm]/MITgcm/model/inc/PARAMS.h
ViewVC logotype

Diff of /MITgcm/model/inc/PARAMS.h

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph | View Patch Patch

revision 1.111 by adcroft, Wed Jun 2 13:23:55 2004 UTC revision 1.127 by heimbach, Fri Sep 17 22:57:11 2004 UTC
# Line 1  Line 1 
1  C $Header$  C $Header$
2  C $Name$  C $Name$
3  C  C
4    
5  CBOP  CBOP
6  C    !ROUTINE: PARAMS.h  C     !ROUTINE: PARAMS.h
7  C    !INTERFACE:  C     !INTERFACE:
8  C    include PARAMS.h  C     #include PARAMS.h
9  C    !DESCRIPTION: \bv  
10  C     *==========================================================*  C     !DESCRIPTION:
11  C     | PARAMS.h                                                    C     Header file defining model "parameters".  The values from the
12  C     | o Header file defining model "parameters".                  C     model standard input file are stored into the variables held
13  C     *==========================================================*  C     here. Notes describing the parameters can also be found here.
14  C     | The values from the model standard input file are          
 C     | stored into the variables held here. Notes describing      
 C     | the parameters can also be found here.                      
 C     *==========================================================*  
 C     \ev  
15  CEOP  CEOP
16    
17  C     Macros for special grid options  C     Macros for special grid options
# Line 65  C     thetaClimFile   :: File containing Line 62  C     thetaClimFile   :: File containing
62  C                       in relaxation term -lambda(theta-theta*)  C                       in relaxation term -lambda(theta-theta*)
63  C     saltClimFile    :: File containing salt climataology used  C     saltClimFile    :: File containing salt climataology used
64  C                       in relaxation term -lambda(salt-salt*)  C                       in relaxation term -lambda(salt-salt*)
65  C     surfQfile       :: File containing surface heat flux  C     surfQfile       :: File containing surface heat flux, excluding SW
66  C     surfQswfile     :: File containing surface shortwave radiation  C                        (old version, kept for backward compatibility)
67    C     surfQnetFile    :: File containing surface net heat flux
68    C     surfQswFile     :: File containing surface shortwave radiation
69  C     dQdTfile        :: File containing thermal relaxation coefficient  C     dQdTfile        :: File containing thermal relaxation coefficient
70  C     EmPmRfile       :: File containing surface fresh water flux  C     EmPmRfile       :: File containing surface fresh water flux
71  C     pLoadFile       :: File containing pressure loading  C     pLoadFile       :: File containing pressure loading
# Line 74  C     buoyancyRelation :: Flag used to i Line 73  C     buoyancyRelation :: Flag used to i
73  C                        get buoyancy.  C                        get buoyancy.
74  C     eosType         :: choose the equation of state:  C     eosType         :: choose the equation of state:
75  C                        LINEAR, POLY3, UNESCO, JMD95Z, JMD95P, MDJWF, IDEALGAS  C                        LINEAR, POLY3, UNESCO, JMD95Z, JMD95P, MDJWF, IDEALGAS
76    C     the_run_name    :: string identifying the name of the model "run"
77        COMMON /PARM_C/ checkPtSuff,        COMMON /PARM_C/ checkPtSuff,
78       &                bathyFile, topoFile,       &                bathyFile, topoFile,
79       &                hydrogThetaFile, hydrogSaltFile,       &                hydrogThetaFile, hydrogSaltFile,
80       &                zonalWindFile, meridWindFile, thetaClimFile,       &                zonalWindFile, meridWindFile, thetaClimFile,
81       &                saltClimFile, buoyancyRelation,       &                saltClimFile, buoyancyRelation,
82       &                EmPmRfile, surfQfile, surfQswfile,       &                EmPmRfile, surfQfile, surfQnetFile, surfQswFile,
83       &                uVelInitFile, vVelInitFile, pSurfInitFile,       &                uVelInitFile, vVelInitFile, pSurfInitFile,
84       &                dQdTfile, ploadFile,       &                dQdTfile, ploadFile,
85       &                eosType, pickupSuff,       &                eosType, pickupSuff,
86       &                mdsioLocalDir       &                mdsioLocalDir,
87         &                the_run_name
88        CHARACTER*(5) checkPtSuff(maxNoChkptLev)        CHARACTER*(5) checkPtSuff(maxNoChkptLev)
89        CHARACTER*(MAX_LEN_FNAM) bathyFile, topoFile        CHARACTER*(MAX_LEN_FNAM) bathyFile, topoFile
90        CHARACTER*(MAX_LEN_FNAM) hydrogThetaFile        CHARACTER*(MAX_LEN_FNAM) hydrogThetaFile
# Line 93  C                        LINEAR, POLY3, Line 94  C                        LINEAR, POLY3,
94        CHARACTER*(MAX_LEN_FNAM) thetaClimFile        CHARACTER*(MAX_LEN_FNAM) thetaClimFile
95        CHARACTER*(MAX_LEN_FNAM) saltClimFile        CHARACTER*(MAX_LEN_FNAM) saltClimFile
96        CHARACTER*(MAX_LEN_FNAM) surfQfile        CHARACTER*(MAX_LEN_FNAM) surfQfile
97        CHARACTER*(MAX_LEN_FNAM) surfQswfile        CHARACTER*(MAX_LEN_FNAM) surfQnetFile
98          CHARACTER*(MAX_LEN_FNAM) surfQswFile
99        CHARACTER*(MAX_LEN_FNAM) EmPmRfile        CHARACTER*(MAX_LEN_FNAM) EmPmRfile
100        CHARACTER*(MAX_LEN_FNAM) buoyancyRelation        CHARACTER*(MAX_LEN_FNAM) buoyancyRelation
101        CHARACTER*(MAX_LEN_FNAM) uVelInitFile        CHARACTER*(MAX_LEN_FNAM) uVelInitFile
# Line 102  C                        LINEAR, POLY3, Line 104  C                        LINEAR, POLY3,
104        CHARACTER*(MAX_LEN_FNAM) dQdTfile        CHARACTER*(MAX_LEN_FNAM) dQdTfile
105        CHARACTER*(MAX_LEN_FNAM) ploadFile        CHARACTER*(MAX_LEN_FNAM) ploadFile
106        CHARACTER*(MAX_LEN_FNAM) mdsioLocalDir        CHARACTER*(MAX_LEN_FNAM) mdsioLocalDir
107          CHARACTER*(MAX_LEN_FNAM) the_run_name
108        CHARACTER*(6) eosType        CHARACTER*(6) eosType
109        CHARACTER*(10) pickupSuff        CHARACTER*(10) pickupSuff
110    
# Line 110  C     cg2dMaxIters        :: Maximum num Line 113  C     cg2dMaxIters        :: Maximum num
113  C                           two-dimensional con. grad solver.  C                           two-dimensional con. grad solver.
114  C     cg2dChkResFreq      :: Frequency with which to check residual  C     cg2dChkResFreq      :: Frequency with which to check residual
115  C                           in con. grad solver.  C                           in con. grad solver.
116    C     cg2dPreCondFreq     :: Frequency for updating cg2d preconditioner
117    C                            (non-linear free-surf.)
118  C     cg3dMaxIters        :: Maximum number of iterations in the  C     cg3dMaxIters        :: Maximum number of iterations in the
119  C                           three-dimensional con. grad solver.  C                           three-dimensional con. grad solver.
120  C     cg3dChkResFreq      :: Frequency with which to check residual  C     cg3dChkResFreq      :: Frequency with which to check residual
# Line 126  C     nonlinFreeSurf      :: option rela Line 131  C     nonlinFreeSurf      :: option rela
131  C                           =0 Linear free surface ; >0 Non-linear  C                           =0 Linear free surface ; >0 Non-linear
132  C     select_rStar        :: option related to r* vertical coordinate  C     select_rStar        :: option related to r* vertical coordinate
133  C                           =0 (default) use r coord. ; > 0 use r*  C                           =0 (default) use r coord. ; > 0 use r*
134    C     tempAdvScheme       :: Temp. Horiz.Advection scheme selector
135    C     tempVertAdvScheme   :: Temp. Vert. Advection scheme selector
136    C     saltAdvScheme       :: Salt. Horiz.advection scheme selector
137    C     saltVertAdvScheme   :: Salt. Vert. Advection scheme selector
138    C     debugLevel          :: debug level selector: higher -> more writing
139    
140        COMMON /PARM_I/        COMMON /PARM_I/
141       &        cg2dMaxIters,       &        cg2dMaxIters,
142       &        cg2dChkResFreq,       &        cg2dChkResFreq, cg2dPreCondFreq,
143       &        cg3dMaxIters,       &        cg3dMaxIters,
144       &        cg3dChkResFreq,       &        cg3dChkResFreq,
145       &        nIter0, nTimeSteps, nEndIter,       &        nIter0, nTimeSteps, nEndIter,
# Line 137  C                           =0 (default) Line 147  C                           =0 (default)
147       &        writeStatePrec, nCheckLev,       &        writeStatePrec, nCheckLev,
148       &        writeBinaryPrec, readBinaryPrec,       &        writeBinaryPrec, readBinaryPrec,
149       &        nonlinFreeSurf, select_rStar,       &        nonlinFreeSurf, select_rStar,
150       &        tempAdvScheme, saltAdvScheme, tracerAdvScheme,       &        tempAdvScheme, tempVertAdvScheme,
151         &        saltAdvScheme, saltVertAdvScheme,
152         &        tracerAdvScheme,
153       &        debugLevel       &        debugLevel
154        INTEGER cg2dMaxIters        INTEGER cg2dMaxIters
155        INTEGER cg2dChkResFreq        INTEGER cg2dChkResFreq
156          INTEGER cg2dPreCondFreq
157        INTEGER cg3dMaxIters        INTEGER cg3dMaxIters
158        INTEGER cg3dChkResFreq        INTEGER cg3dChkResFreq
159        INTEGER nIter0        INTEGER nIter0
# Line 153  C                           =0 (default) Line 166  C                           =0 (default)
166        INTEGER nCheckLev        INTEGER nCheckLev
167        INTEGER nonlinFreeSurf        INTEGER nonlinFreeSurf
168        INTEGER select_rStar        INTEGER select_rStar
169        INTEGER tempAdvScheme        INTEGER tempAdvScheme, tempVertAdvScheme
170        INTEGER saltAdvScheme        INTEGER saltAdvScheme, saltVertAdvScheme
171        INTEGER tracerAdvScheme        INTEGER tracerAdvScheme
172        INTEGER debugLevel        INTEGER debugLevel
173    
# Line 171  C     usingCartesianGrid :: If TRUE grid Line 184  C     usingCartesianGrid :: If TRUE grid
184  C                          coordinate frame.  C                          coordinate frame.
185  C     usingSphericalPolarGrid :: If TRUE grid generation will be in a  C     usingSphericalPolarGrid :: If TRUE grid generation will be in a
186  C                               spherical polar frame.  C                               spherical polar frame.
187    C     usingCylindricalGrid :: If TRUE grid generation will be Cylindrical
188  C     no_slip_sides :: Impose "no-slip" at lateral boundaries.  C     no_slip_sides :: Impose "no-slip" at lateral boundaries.
189  C     no_slip_bottom :: Impose "no-slip" at bottom boundary.  C     no_slip_bottom :: Impose "no-slip" at bottom boundary.
190  C     staggerTimeStep :: enable a Stagger time stepping T,S Rho then U,V  C     staggerTimeStep :: enable a Stagger time stepping T,S Rho then U,V
# Line 207  C                           linear relat Line 221  C                           linear relat
221  C     momStepping   :: Turns momentum equation time-stepping off  C     momStepping   :: Turns momentum equation time-stepping off
222  C     tempStepping  :: Turns temperature equation time-stepping off  C     tempStepping  :: Turns temperature equation time-stepping off
223  C     saltStepping  :: Turns salinity equation time-stepping off  C     saltStepping  :: Turns salinity equation time-stepping off
 C     tr1Stepping   :: Turns passive tracer 1 time-stepping on/off  
224  C     useConstantF  :: Coriolis parameter set to f0  C     useConstantF  :: Coriolis parameter set to f0
225  C     useBetaPlaneF :: Coriolis parameter set to f0 + beta.y  C     useBetaPlaneF :: Coriolis parameter set to f0 + beta.y
226  C     useSphereF    :: Coriolis parameter set to 2.omega.sin(phi)  C     useSphereF    :: Coriolis parameter set to 2.omega.sin(phi)
227  C     useCDscheme   :: use CD-scheme to calculate Coriolis terms.  C     useCDscheme   :: use CD-scheme to calculate Coriolis terms.
228  C     useJamartWetPoints :: Use wet-point method for Coriolis (Jamart and Ozer, 1986)  C     useJamartWetPoints :: Use wet-point method for Coriolis (Jamart and Ozer, 1986)
229    C     useJamartMomAdv :: Use wet-point method for V.I. non-linear term
230  C     SadournyCoriolis :: use the enstrophy conserving scheme by Sadourny  C     SadournyCoriolis :: use the enstrophy conserving scheme by Sadourny
231  C     upwindVorticity :: bias interpolation of vorticity in the Coriolis term  C     upwindVorticity :: bias interpolation of vorticity in the Coriolis term
232  C     highOrderVorticity :: use 3rd/4th order interp. of vorticity in Coriolis  C     highOrderVorticity :: use 3rd/4th order interp. of vorticity in Coriolis
# Line 223  C     tempImplVertAdv :: Turns on implic Line 237  C     tempImplVertAdv :: Turns on implic
237  C     saltImplVertAdv :: Turns on implicit vertical advection for Salinity  C     saltImplVertAdv :: Turns on implicit vertical advection for Salinity
238  C     momImplVertAdv  :: Turns on implicit vertical advection for Momentum  C     momImplVertAdv  :: Turns on implicit vertical advection for Momentum
239  C     multiDimAdvection :: Flag that enable multi-dimension advection  C     multiDimAdvection :: Flag that enable multi-dimension advection
240    C     useMultiDimAdvec  :: True if multi-dim advection is used at least once
241  C     forcing_In_AB :: if False, put forcing (Temp,Salt,Tracers) contribution  C     forcing_In_AB :: if False, put forcing (Temp,Salt,Tracers) contribution
242  C                      out off Adams-Bashforth time stepping.  C                      out off Adams-Bashforth time stepping.
243  C     doThetaClimRelax :: Set true if relaxation to temperature  C     doThetaClimRelax :: Set true if relaxation to temperature
# Line 247  C                       outputs from mas Line 262  C                       outputs from mas
262  C     allowFreezing  :: Allows surface water to freeze and form ice  C     allowFreezing  :: Allows surface water to freeze and form ice
263  C     useOldFreezing :: use the old version (before checkpoint52a_pre, 2003-11-12)  C     useOldFreezing :: use the old version (before checkpoint52a_pre, 2003-11-12)
264  C     groundAtK1  :: put the surface(k=1) at the Lower Boundary (=ground)  C     groundAtK1  :: put the surface(k=1) at the Lower Boundary (=ground)
265    C     pickup_write_mdsio :: use mdsio to write pickups
266    C     pickup_read_mdsio  :: use mdsio to read  pickups
267    C     pickup_write_immed :: echo the pickup immediately (for conversion)
268    C     timeave_mdsio      :: use mdsio for timeave output
269    C     snapshot_mdsio     :: use mdsio for "snapshot" (dumpfreq/diagfreq) output
270    C     monitor_stdio      :: use stdio for monitor output
271        COMMON /PARM_L/ usingCartesianGrid, usingSphericalPolarGrid,        COMMON /PARM_L/ usingCartesianGrid, usingSphericalPolarGrid,
272       & usingCurvilinearGrid,       & usingCurvilinearGrid, usingCylindricalGrid,
273       & no_slip_sides,no_slip_bottom,       & no_slip_sides,no_slip_bottom,
274       & staggerTimeStep,       & staggerTimeStep,
275       & momViscosity, momAdvection, momForcing, useCoriolis,       & momViscosity, momAdvection, momForcing, useCoriolis,
# Line 257  C     groundAtK1  :: put the surface(k=1 Line 278  C     groundAtK1  :: put the surface(k=1
278       & saltDiffusion, saltAdvection, saltForcing,       & saltDiffusion, saltAdvection, saltForcing,
279       & useRealFreshWaterFlux,       & useRealFreshWaterFlux,
280       & rigidLid, implicitFreeSurface, exactConserv, uniformLin_PhiSurf,       & rigidLid, implicitFreeSurface, exactConserv, uniformLin_PhiSurf,
281       & momStepping, tempStepping, saltStepping, tr1Stepping,       & momStepping, tempStepping, saltStepping,
282       & metricTerms, usingSphericalPolarMTerms, useNHMTerms,       & metricTerms, usingSphericalPolarMTerms, useNHMTerms,
283       & useConstantF, useBetaPlaneF, useSphereF,       & useConstantF, useBetaPlaneF, useSphereF,
284       & useCDscheme,       & useCDscheme,
285       & useEnergyConservingCoriolis, useJamartWetPoints,       & useEnergyConservingCoriolis, useJamartWetPoints, useJamartMomAdv,
286       & SadournyCoriolis, upwindVorticity, highOrderVorticity,       & SadournyCoriolis, upwindVorticity, highOrderVorticity,
287       & useAbsVorticity,       & useAbsVorticity,
288       & implicitDiffusion, implicitViscosity,       & implicitDiffusion, implicitViscosity,
289       & tempImplVertAdv, saltImplVertAdv, momImplVertAdv,       & tempImplVertAdv, saltImplVertAdv, momImplVertAdv,
290       & multiDimAdvection, forcing_In_AB,       & multiDimAdvection, useMultiDimAdvec, forcing_In_AB,
291       & doThetaClimRelax, doSaltClimRelax, doTr1ClimRelax,       & doThetaClimRelax, doSaltClimRelax, doTr1ClimRelax,
292       & periodicExternalForcing,       & periodicExternalForcing,
293       & usingPCoords, usingZCoords, useDynP_inEos_Zc, setCenterDr,       & usingPCoords, usingZCoords, useDynP_inEos_Zc, setCenterDr,
294       & nonHydrostatic, quasiHydrostatic, globalFiles, useSingleCpuIO,       & nonHydrostatic, quasiHydrostatic, globalFiles, useSingleCpuIO,
295       & allowFreezing, useOldFreezing, groundAtK1,       & allowFreezing, useOldFreezing, groundAtK1,
296       & usePickupBeforeC35, debugMode,       & usePickupBeforeC35, usePickupBeforeC54, debugMode,
297       & readPickupWithTracer, writePickupWithTracer       & readPickupWithTracer, writePickupWithTracer,
298         & pickup_read_mdsio, pickup_write_mdsio, pickup_write_immed,
299         & timeave_mdsio, snapshot_mdsio, monitor_stdio
300        LOGICAL usingCartesianGrid        LOGICAL usingCartesianGrid
301        LOGICAL usingSphericalPolarGrid        LOGICAL usingSphericalPolarGrid
302          LOGICAL usingCylindricalGrid
303        LOGICAL usingCurvilinearGrid        LOGICAL usingCurvilinearGrid
304        LOGICAL usingSphericalPolarMTerms        LOGICAL usingSphericalPolarMTerms
305        LOGICAL useNHMTerms        LOGICAL useNHMTerms
# Line 302  C     groundAtK1  :: put the surface(k=1 Line 326  C     groundAtK1  :: put the surface(k=1
326        LOGICAL momStepping        LOGICAL momStepping
327        LOGICAL tempStepping        LOGICAL tempStepping
328        LOGICAL saltStepping        LOGICAL saltStepping
       LOGICAL tr1Stepping  
329        LOGICAL metricTerms        LOGICAL metricTerms
330        LOGICAL useConstantF        LOGICAL useConstantF
331        LOGICAL useBetaPlaneF        LOGICAL useBetaPlaneF
# Line 310  C     groundAtK1  :: put the surface(k=1 Line 333  C     groundAtK1  :: put the surface(k=1
333        LOGICAL useCDscheme        LOGICAL useCDscheme
334        LOGICAL useEnergyConservingCoriolis        LOGICAL useEnergyConservingCoriolis
335        LOGICAL useJamartWetPoints        LOGICAL useJamartWetPoints
336          LOGICAL useJamartMomAdv
337        LOGICAL SadournyCoriolis        LOGICAL SadournyCoriolis
338        LOGICAL upwindVorticity        LOGICAL upwindVorticity
339        LOGICAL highOrderVorticity        LOGICAL highOrderVorticity
# Line 320  C     groundAtK1  :: put the surface(k=1 Line 344  C     groundAtK1  :: put the surface(k=1
344        LOGICAL saltImplVertAdv        LOGICAL saltImplVertAdv
345        LOGICAL momImplVertAdv        LOGICAL momImplVertAdv
346        LOGICAL multiDimAdvection        LOGICAL multiDimAdvection
347          LOGICAL useMultiDimAdvec
348        LOGICAL forcing_In_AB        LOGICAL forcing_In_AB
349        LOGICAL doThetaClimRelax        LOGICAL doThetaClimRelax
350        LOGICAL doSaltClimRelax        LOGICAL doSaltClimRelax
# Line 337  C     groundAtK1  :: put the surface(k=1 Line 362  C     groundAtK1  :: put the surface(k=1
362        LOGICAL useOldFreezing        LOGICAL useOldFreezing
363        LOGICAL groundAtK1        LOGICAL groundAtK1
364        LOGICAL usePickupBeforeC35        LOGICAL usePickupBeforeC35
365          LOGICAL usePickupBeforeC54
366        LOGICAL debugMode        LOGICAL debugMode
367        LOGICAL readPickupWithTracer        LOGICAL readPickupWithTracer
368        LOGICAL writePickupWithTracer        LOGICAL writePickupWithTracer
369          LOGICAL pickup_read_mdsio, pickup_write_mdsio
370          LOGICAL pickup_write_immed
371          LOGICAL timeave_mdsio, snapshot_mdsio, monitor_stdio
372    
373  C--   COMMON /PARM_R/ "Real" valued parameters used by the model.  C--   COMMON /PARM_R/ "Real" valued parameters used by the model.
374  C     gg2dTargetResidual  C     cg2dTargetResidual
375  C          :: Target residual for cg2d solver; no unit (RHS normalisation)  C          :: Target residual for cg2d solver; no unit (RHS normalisation)
376  C     cg2dTargetResWunit  C     cg2dTargetResWunit
377  C          :: Target residual for cg2d solver; W unit (No RHS normalisation)  C          :: Target residual for cg2d solver; W unit (No RHS normalisation)
# Line 410  C     diffKrS   :: Laplacian diffusion c Line 439  C     diffKrS   :: Laplacian diffusion c
439  C                 salt vertically ( units of r^2/s )  C                 salt vertically ( units of r^2/s )
440  C     diffK4S   :: Biharmonic diffusion coeff. for mixing of  C     diffK4S   :: Biharmonic diffusion coeff. for mixing of
441  C                 salt laterally ( m^4/s )  C                 salt laterally ( m^4/s )
442    C     diffKrBL79surf :: T/S surface diffusivity (m^2/s) Bryan and Lewis, 1979
443    C     diffKrBL79deep :: T/S deep diffusivity (m^2/s) Bryan and Lewis, 1979
444    C     diffKrBL79scl  :: depth scale for arctan fn (m) Bryan and Lewis, 1979
445    C     diffKrBL79Ho   :: depth offset for arctan fn (m) Bryan and Lewis, 1979
446  C     deltaT    :: Default timestep ( s )  C     deltaT    :: Default timestep ( s )
447  C     deltaTClock  :: Timestep used as model "clock". This determines the  C     deltaTClock  :: Timestep used as model "clock". This determines the
448  C                    IO frequencies and is used in tagging output. It can  C                    IO frequencies and is used in tagging output. It can
# Line 494  C      --"-"--  Quadratic  ( linear: 1/s Line 527  C      --"-"--  Quadratic  ( linear: 1/s
527       & viscAr, viscAstrain, viscAtension,       & viscAr, viscAstrain, viscAtension,
528       & diffKhT, diffK4T, diffKrT,       & diffKhT, diffK4T, diffKrT,
529       & diffKhS, diffK4S, diffKrS,       & diffKhS, diffK4S, diffKrS,
530         & diffKrBL79surf, diffKrBL79deep, diffKrBL79scl, diffKrBL79Ho,
531       & delT, tauCD, rCD, freeSurfFac, implicSurfPress, implicDiv2Dflow,       & delT, tauCD, rCD, freeSurfFac, implicSurfPress, implicDiv2Dflow,
532       & hFacMin, hFacMinDz, hFacInf, hFacSup,       & hFacMin, hFacMinDz, hFacInf, hFacSup,
533       & gravity, recip_Gravity, gBaro, rhonil, recip_rhonil,       & gravity, recip_Gravity, gBaro, rhonil, recip_rhonil,
# Line 511  C      --"-"--  Quadratic  ( linear: 1/s Line 545  C      --"-"--  Quadratic  ( linear: 1/s
545       & hFacMinDr, hFacMinDp,       & hFacMinDr, hFacMinDp,
546       & horiVertRatio, recip_horiVertRatio,       & horiVertRatio, recip_horiVertRatio,
547       & ivdc_kappa, Ro_SeaLevel,       & ivdc_kappa, Ro_SeaLevel,
548       & bottomDragLinear,bottomDragQuadratic       & bottomDragLinear,bottomDragQuadratic,
549         & tCyl
550    
551        _RL cg2dTargetResidual        _RL cg2dTargetResidual
552        _RL cg2dTargetResWunit        _RL cg2dTargetResWunit
# Line 559  C      --"-"--  Quadratic  ( linear: 1/s Line 594  C      --"-"--  Quadratic  ( linear: 1/s
594        _RL diffKhS        _RL diffKhS
595        _RL diffKrS        _RL diffKrS
596        _RL diffK4S        _RL diffK4S
597          _RL diffKrBL79surf
598          _RL diffKrBL79deep
599          _RL diffKrBL79scl
600          _RL diffKrBL79Ho
601        _RL delt        _RL delt
602        _RL tauCD        _RL tauCD
603        _RL rCD        _RL rCD
# Line 615  C      --"-"--  Quadratic  ( linear: 1/s Line 654  C      --"-"--  Quadratic  ( linear: 1/s
654        _RL Ro_SeaLevel        _RL Ro_SeaLevel
655        _RL bottomDragLinear        _RL bottomDragLinear
656        _RL bottomDragQuadratic        _RL bottomDragQuadratic
657          _RL tCyl
658    
659  C--   COMMON /PARM_A/ Thermodynamics constants ?  C--   COMMON /PARM_A/ Thermodynamics constants ?
660        COMMON /PARM_A/ HeatCapacity_Cp,recip_Cp        COMMON /PARM_A/ HeatCapacity_Cp,recip_Cp
# Line 642  C             derived from the orography Line 682  C             derived from the orography
682        INTEGER integr_GeoPot, selectFindRoSurf        INTEGER integr_GeoPot, selectFindRoSurf
683    
684  C Logical flags for selecting packages  C Logical flags for selecting packages
685          LOGICAL useOPPS
686          LOGICAL usePP81
687          LOGICAL useMY82
688          LOGICAL useGGL90
689        LOGICAL useKPP        LOGICAL useKPP
690        LOGICAL useGMRedi        LOGICAL useGMRedi
691        LOGICAL useOBCS        LOGICAL useOBCS
# Line 665  C Logical flags for selecting packages Line 709  C Logical flags for selecting packages
709       &        useKPP, useGMRedi, useOBCS, useAIM, useLand, useECCO,       &        useKPP, useGMRedi, useOBCS, useAIM, useLand, useECCO,
710       &        useSHAP_FILT, useZONAL_FILT, useGrdchk, useFLT,       &        useSHAP_FILT, useZONAL_FILT, useGrdchk, useFLT,
711       &        usePTRACERS,  useSBO, useSEAICE, useThSIce, useBulkForce,       &        usePTRACERS,  useSBO, useSEAICE, useThSIce, useBulkForce,
712       &        usefizhi,  usegridalt, usediagnostics, useEBM       &        usefizhi,  usegridalt, usediagnostics, useEBM,
713         &        usePP81, useMY82, useOPPS, useGGL90
 C     Run-time flags for early-initialization of MNC  
       LOGICAL  
      &     useMNC,  
      &     mnc_use_indir, mnc_use_outdir, mnc_outdir_date,  
      &     mnc_echo_gvtypes, mnc_pickup_write, mnc_pickup_read,  
      &     mnc_use_for_mon  
       CHARACTER*(MAX_LEN_FNAM) mnc_outdir_str  
       CHARACTER*(MAX_LEN_FNAM) mnc_indir_str  
       COMMON /PARM_MNC/  
      &     useMNC,  
      &     mnc_use_indir, mnc_use_outdir, mnc_outdir_date,  
      &     mnc_echo_gvtypes, mnc_pickup_write, mnc_pickup_read,  
      &     mnc_outdir_str, mnc_indir_str,  
      &     mnc_use_for_mon  
   
714    
715  CEH3 ;;; Local Variables: ***  CEH3 ;;; Local Variables: ***
716  CEH3 ;;; mode:fortran ***  CEH3 ;;; mode:fortran ***
Legend:
Removed from v.1.111  
changed lines
  Added in v.1.127
  ViewVC Help
Powered by ViewVC 1.1.22