--- MITgcm/model/inc/PARAMS.h 2004/10/17 23:03:08 1.132 +++ MITgcm/model/inc/PARAMS.h 2005/09/20 21:01:30 1.166 @@ -1,4 +1,4 @@ -C $Header: /home/ubuntu/mnt/e9_copy/MITgcm/model/inc/PARAMS.h,v 1.132 2004/10/17 23:03:08 jmc Exp $ +C $Header: /home/ubuntu/mnt/e9_copy/MITgcm/model/inc/PARAMS.h,v 1.166 2005/09/20 21:01:30 baylor Exp $ C $Name: $ C @@ -49,6 +49,10 @@ C-- COMMON /PARM_C/ Character valued parameters used by the model. C checkPtSuff :: List of checkpoint file suffices +C delXFile :: File containing X-spacing grid definition (1.D array) +C delYFile :: File containing Y-spacing grid definition (1.D array) +C horizGridFile :: File containing horizontal-grid definition +C (only when using curvilinear_grid) C bathyFile :: File containing bathymetry. If not defined bathymetry C is taken from inline function. C topoFile :: File containing the topography of the surface (unit=m) @@ -68,24 +72,34 @@ C surfQswFile :: File containing surface shortwave radiation C dQdTfile :: File containing thermal relaxation coefficient C EmPmRfile :: File containing surface fresh water flux +C saltFluxFile :: File containing surface salt flux C pLoadFile :: File containing pressure loading +C eddyTauxFile :: File containing zonal Eddy stress data +C eddyTauyFile :: File containing meridional Eddy stress data C buoyancyRelation :: Flag used to indicate which relation to use to C get buoyancy. C eosType :: choose the equation of state: C LINEAR, POLY3, UNESCO, JMD95Z, JMD95P, MDJWF, IDEALGAS C the_run_name :: string identifying the name of the model "run" COMMON /PARM_C/ checkPtSuff, + & delXFile, delYFile, horizGridFile, & bathyFile, topoFile, & hydrogThetaFile, hydrogSaltFile, & zonalWindFile, meridWindFile, thetaClimFile, & saltClimFile, buoyancyRelation, - & EmPmRfile, surfQfile, surfQnetFile, surfQswFile, + & EmPmRfile, saltFluxFile, + & surfQfile, surfQnetFile, surfQswFile, + & lambdaThetaFile, lambdaSaltFile, & uVelInitFile, vVelInitFile, pSurfInitFile, & dQdTfile, ploadFile, + & eddyTauxFile, eddyTauyFile, & eosType, pickupSuff, & mdsioLocalDir, & the_run_name CHARACTER*(5) checkPtSuff(maxNoChkptLev) + CHARACTER*(MAX_LEN_FNAM) delXFile + CHARACTER*(MAX_LEN_FNAM) delYFile + CHARACTER*(MAX_LEN_FNAM) horizGridFile CHARACTER*(MAX_LEN_FNAM) bathyFile, topoFile CHARACTER*(MAX_LEN_FNAM) hydrogThetaFile CHARACTER*(MAX_LEN_FNAM) hydrogSaltFile @@ -97,12 +111,17 @@ CHARACTER*(MAX_LEN_FNAM) surfQnetFile CHARACTER*(MAX_LEN_FNAM) surfQswFile CHARACTER*(MAX_LEN_FNAM) EmPmRfile + CHARACTER*(MAX_LEN_FNAM) saltFluxFile CHARACTER*(MAX_LEN_FNAM) buoyancyRelation CHARACTER*(MAX_LEN_FNAM) uVelInitFile CHARACTER*(MAX_LEN_FNAM) vVelInitFile CHARACTER*(MAX_LEN_FNAM) pSurfInitFile CHARACTER*(MAX_LEN_FNAM) dQdTfile CHARACTER*(MAX_LEN_FNAM) ploadFile + CHARACTER*(MAX_LEN_FNAM) eddyTauxFile + CHARACTER*(MAX_LEN_FNAM) eddyTauyFile + CHARACTER*(MAX_LEN_FNAM) lambdaThetaFile + CHARACTER*(MAX_LEN_FNAM) lambdaSaltFile CHARACTER*(MAX_LEN_FNAM) mdsioLocalDir CHARACTER*(MAX_LEN_FNAM) the_run_name CHARACTER*(6) eosType @@ -149,7 +168,6 @@ & nonlinFreeSurf, select_rStar, & tempAdvScheme, tempVertAdvScheme, & saltAdvScheme, saltVertAdvScheme, - & tracerAdvScheme, & debugLevel INTEGER cg2dMaxIters INTEGER cg2dChkResFreq @@ -168,7 +186,6 @@ INTEGER select_rStar INTEGER tempAdvScheme, tempVertAdvScheme INTEGER saltAdvScheme, saltVertAdvScheme - INTEGER tracerAdvScheme INTEGER debugLevel C @@ -198,14 +215,10 @@ C usingSphericalPolarMTerms :: If TRUE use spherical polar metric terms. C useNHMTerms :: If TRUE use non-hydrostatic metric terms. C useCoriolis :: Flag which turns the coriolis terms on and off. -C tempDiffusion :: Flag which turns diffusion of temperature on -C and off. C tempAdvection :: Flag which turns advection of temperature on C and off. C tempForcing :: Flag which turns external forcing of temperature on C and off. -C saltDiffusion :: Flag which turns diffusion of salinity on -C and off. C saltAdvection :: Flag which turns advection of salinity on C and off. C saltForcing :: Flag which turns external forcing of salinity on @@ -213,6 +226,12 @@ C useRealFreshWaterFlux :: if True (=Natural BCS), treats P+R-E flux C as a real Fresh Water (=> changes the Sea Level) C if F, converts P+R-E to salt flux (no SL effect) +C useFullLeith :: Set to true to use full Leith viscosity (may be unstable +C on irregular grids) +C useAnisotropicViscAGridMax :: Set to true to use Alistair's latest +C anisotropic length scale. It is used only for maximum viscosity +C calculations. Alistair recommends a value of viscA*GridMax=.25 +C useStrainTensionVisc:: Set to true to use Strain-Tension viscous terms C rigidLid :: Set to true to use rigid lid C implicitFreeSurface :: Set to true to use implcit free surface C exactConserv :: Set to true to conserve exactly the total Volume @@ -229,7 +248,8 @@ C useJamartMomAdv :: Use wet-point method for V.I. non-linear term C SadournyCoriolis :: use the enstrophy conserving scheme by Sadourny C upwindVorticity :: bias interpolation of vorticity in the Coriolis term -C highOrderVorticity :: use 3rd/4th order interp. of vorticity in Coriolis +C highOrderVorticity :: use 3rd/4th order interp. of vorticity (V.I., advection) +C upwindShear :: use 1rst order upwind interp. (V.I., vertical advection) C useAbsVorticity :: work with f+zeta in Coriolis terms C implicitDiffusion :: Turns implicit vertical diffusion on C implicitViscosity :: Turns implicit vertical viscosity on @@ -240,15 +260,20 @@ C useMultiDimAdvec :: True if multi-dim advection is used at least once C forcing_In_AB :: if False, put forcing (Temp,Salt,Tracers) contribution C out off Adams-Bashforth time stepping. +C startFromPickupAB2 :: with AB-3 code, start from an AB-2 pickup C doThetaClimRelax :: Set true if relaxation to temperature C climatology is required. C doSaltClimRelax :: Set true if relaxation to salinity C climatology is required. C periodicExternalForcing :: Set true if forcing is time-dependant -C usingPCoords :: Set to indicate that we are working in pressure -C coords. (jmc: is it still used ?) -C usingZCoords :: Set to indicate that we are working in height -C coords. (jmc: is it still used ?) +C usingPCoords :: Set to indicate that we are working in a pressure +C type coordinate (p or p*). +C usingZCoords :: Set to indicate that we are working in a height +C type coordinate (z or z*) +C fluidIsAir :: Set to indicate that the fluid major constituent +C is air +C fluidIsWater :: Set to indicate that the fluid major constituent +C is water C useDynP_inEos_Zc :: use the dynamical pressure in EOS (with Z-coord.) C this requires specific code for restart & exchange C setCenterDr :: set cell Center depth and put Interface at the middle @@ -261,22 +286,28 @@ C outputs from master mpi process only. C allowFreezing :: Allows surface water to freeze and form ice C useOldFreezing :: use the old version (before checkpoint52a_pre, 2003-11-12) -C groundAtK1 :: put the surface(k=1) at the Lower Boundary (=ground) C pickup_write_mdsio :: use mdsio to write pickups C pickup_read_mdsio :: use mdsio to read pickups C pickup_write_immed :: echo the pickup immediately (for conversion) C timeave_mdsio :: use mdsio for timeave output C snapshot_mdsio :: use mdsio for "snapshot" (dumpfreq/diagfreq) output C monitor_stdio :: use stdio for monitor output +C calendarDumps :: When set, approximate months (30-31 days) and years (360-372 days) +C for parameters chkPtFreq, pChkPtFreq, taveFreq, SEAICE_taveFreq, +C KPP_taveFreq, and freq in pkg/diagnostics are converted to exact +C calendar months and years. Requires pkg/cal. +C dumpInitAndLast :: dumps model state to files at Initial (nIter0) +C & Last iteration, in addition multiple of dumpFreq iter. COMMON /PARM_L/ usingCartesianGrid, usingSphericalPolarGrid, & usingCurvilinearGrid, usingCylindricalGrid, & no_slip_sides,no_slip_bottom, & staggerTimeStep, & momViscosity, momAdvection, momForcing, useCoriolis, & momPressureForcing, vectorInvariantMomentum, - & tempDiffusion, tempAdvection, tempForcing, - & saltDiffusion, saltAdvection, saltForcing, + & tempAdvection, tempForcing, + & saltAdvection, saltForcing, & useRealFreshWaterFlux, + & useFullLeith, useAnisotropicViscAGridMax, useStrainTensionVisc, & rigidLid, implicitFreeSurface, exactConserv, uniformLin_PhiSurf, & momStepping, tempStepping, saltStepping, & metricTerms, usingSphericalPolarMTerms, useNHMTerms, @@ -284,21 +315,22 @@ & useCDscheme, & useEnergyConservingCoriolis, useJamartWetPoints, useJamartMomAdv, & SadournyCoriolis, upwindVorticity, highOrderVorticity, - & useAbsVorticity, + & useAbsVorticity, upwindShear, & implicitDiffusion, implicitViscosity, & tempImplVertAdv, saltImplVertAdv, momImplVertAdv, & multiDimAdvection, useMultiDimAdvec, forcing_In_AB, & doThetaClimRelax, doSaltClimRelax, doTr1ClimRelax, & periodicExternalForcing, + & fluidIsAir, fluidIsWater, & usingPCoords, usingZCoords, useDynP_inEos_Zc, setCenterDr, & nonHydrostatic, quasiHydrostatic, globalFiles, useSingleCpuIO, - & allowFreezing, useOldFreezing, groundAtK1, - & usePickupBeforeC35, usePickupBeforeC54, debugMode, - & readPickupWithTracer, writePickupWithTracer, + & allowFreezing, useOldFreezing, + & usePickupBeforeC35, usePickupBeforeC54, startFromPickupAB2, & pickup_read_mdsio, pickup_write_mdsio, pickup_write_immed, & timeave_mdsio, snapshot_mdsio, monitor_stdio, - & timeave_ioinc, snapshot_ioinc, monitor_ioinc, - & pickup_write_ioinc + & outputTypesInclusive, dumpInitAndLast, debugMode, + & inAdMode, inAdTrue, inAdFalse, inAdExact, + & calendarDumps LOGICAL usingCartesianGrid LOGICAL usingSphericalPolarGrid @@ -315,13 +347,14 @@ LOGICAL momPressureForcing LOGICAL useCoriolis LOGICAL vectorInvariantMomentum - LOGICAL tempDiffusion LOGICAL tempAdvection LOGICAL tempForcing - LOGICAL saltDiffusion LOGICAL saltAdvection LOGICAL saltForcing LOGICAL useRealFreshWaterFlux + LOGICAL useFullLeith + LOGICAL useAnisotropicViscAGridMax + LOGICAL useStrainTensionVisc LOGICAL rigidLid LOGICAL implicitFreeSurface LOGICAL exactConserv @@ -341,6 +374,7 @@ LOGICAL upwindVorticity LOGICAL highOrderVorticity LOGICAL useAbsVorticity + LOGICAL upwindShear LOGICAL implicitDiffusion LOGICAL implicitViscosity LOGICAL tempImplVertAdv @@ -353,6 +387,8 @@ LOGICAL doSaltClimRelax LOGICAL doTr1ClimRelax LOGICAL periodicExternalForcing + LOGICAL fluidIsAir + LOGICAL fluidIsWater LOGICAL usingPCoords LOGICAL usingZCoords LOGICAL useDynP_inEos_Zc @@ -363,17 +399,17 @@ LOGICAL useSingleCpuIO LOGICAL allowFreezing LOGICAL useOldFreezing - LOGICAL groundAtK1 LOGICAL usePickupBeforeC35 LOGICAL usePickupBeforeC54 + LOGICAL startFromPickupAB2 + LOGICAL dumpInitAndLast LOGICAL debugMode - LOGICAL readPickupWithTracer - LOGICAL writePickupWithTracer LOGICAL pickup_read_mdsio, pickup_write_mdsio LOGICAL pickup_write_immed LOGICAL timeave_mdsio, snapshot_mdsio, monitor_stdio - LOGICAL timeave_ioinc, snapshot_ioinc, monitor_ioinc - LOGICAL pickup_write_ioinc + LOGICAL outputTypesInclusive + LOGICAL inAdMode, inAdTrue, inAdFalse, inAdExact + LOGICAL calendarDumps C-- COMMON /PARM_R/ "Real" valued parameters used by the model. C cg2dTargetResidual @@ -408,7 +444,6 @@ C rhoConstFresh :: Constant reference density for fresh water (rain) C tRef :: reference vertical profile for potential temperature C sRef :: reference vertical profile for salinity/specific humidity -C startTime :: Start time for model ( s ) C phiMin :: Latitude of southern most cell face. C thetaMin :: Longitude of western most cell face (this C is an "inert" parameter but it is included @@ -429,14 +464,37 @@ C momentum vertically ( units of r^2/s ) C viscA4 :: Biharmonic viscosity coeff. for mixing of C momentum laterally ( m^4/s ) -C viscC2leith :: Leith non-dimensional viscosity factor +C viscA4W :: Biharmonic viscosity coeff. for mixing of vertical +C momentum laterally, no effect for hydrostatic +C model, defaults to viscA4 if unset ( m^2/s ) +C viscAhD :: Eddy viscosity coeff. for mixing of momentum laterally +C (act on Divergence part) ( m^2/s ) +C viscAhZ :: Eddy viscosity coeff. for mixing of momentum laterally +C (act on Vorticity part) ( m^2/s ) +C viscA4D :: Biharmonic viscosity coeff. for mixing of momentum laterally +C (act on Divergence part) ( m^4/s ) +C viscA4Z :: Biharmonic viscosity coeff. for mixing of momentum laterally +C (act on Vorticity part) ( m^4/s ) +C viscC2leith :: Leith non-dimensional viscosity factor (grad(vort)) +C viscC2leithD :: Modified Leith non-dimensional visc. factor (grad(div)) +C viscC2smag :: Smagorinsky non-dimensional viscosity factor (harmonic) +C viscC4smag :: Smagorinsky non-dimensional viscosity factor (biharmonic) C viscAhMax :: Maximum eddy viscosity coeff. for mixing of -C momentum laterally ( m^2/s ) +C momentum laterally ( m^2/s ) +C viscAhReMax :: Maximum gridscale Reynolds number for eddy viscosity +C coeff. for mixing of momentum laterally (non-dim) +C viscAhGridMax:: maximum and minimum harmonic viscosity coefficients ... +C viscAhGridMin:: in terms of non-dimensional grid-size dependent visc. C viscA4Max :: Maximum biharmonic viscosity coeff. for mixing of C momentum laterally ( m^4/s ) +C viscA4ReMax :: Maximum Gridscale Reynolds number for +C biharmonic viscosity coeff. momentum laterally (non-dim) C viscAhGrid:: non-dimensional grid-size dependent viscosity C viscA4Grid:: non-dimensional grid-size dependent bi-harmonic viscosity -C viscC4leith :: Leith non-dimensional viscosity factor +C viscA4GridMax:: maximum and minimum biharmonic viscosity coefficients ... +C viscA4GridMin:: in terms of non-dimensional grid-size dependent viscosity +C viscC4leith :: Leith non-dimensional viscosity factor (grad(vort)) +C viscC4leithD :: Modified Leith non-dimensional viscosity factor (grad(div)) C diffKhT :: Laplacian diffusion coeff. for mixing of C heat laterally ( m^2/s ) C diffKrNrT :: vertical profile of Laplacian diffusion coeff. @@ -461,11 +519,14 @@ C Frequency of checkpointing and dumping of the model state C are referenced to this clock. ( s ) C deltaTMom :: Timestep for momemtum equations ( s ) -C deltaTtracer :: Timestep for tracer equations ( s ) +C dTtracerLev :: Timestep for tracer equations ( s ), function of level k C deltaTfreesurf :: Timestep for free-surface equation ( s ) C freesurfFac :: Parameter to turn implicit free surface term on or off C freesurfac = 1. uses implicit free surface C freesurfac = 0. uses rigid lid +C abEps :: Adams-Bashforth-2 stabilizing weight +C alph_AB :: Adams-Bashforth-3 primary factor +C beta_AB :: Adams-Bashforth-3 secondary factor C implicSurfPress :: parameter of the Crank-Nickelson time stepping : C Implicit part of Surface Pressure Gradient ( 0-1 ) C implicDiv2Dflow :: parameter of the Crank-Nickelson time stepping : @@ -478,6 +539,7 @@ C hFacSup that control vanishing and creating levels C tauCD :: CD scheme coupling timescale ( 1/s ) C rCD :: CD scheme normalised coupling parameter ( 0-1 ) +C baseTime :: model base time (time origin) = time @ iteration zero C startTime :: Starting time for this integration ( s ). C endTime :: Ending time for this integration ( s ). C chkPtFreq :: Frequency of rolling check pointing ( s ). @@ -501,9 +563,7 @@ C step (of each taveFreq period) put in the time average. C (fraction for 1rst iter = 1 - tave_lastIter) C tauThetaClimRelax :: Relaxation to climatology time scale ( s ). -C lambdaThetaClimRelax :: Inverse time scale for relaxation ( 1/s ). C tauSaltClimRelax :: Relaxation to climatology time scale ( s ). -C lambdaSaltClimRelax :: Inverse time scale for relaxation ( 1/s ). C latBandClimRelax :: latitude band where Relaxation to Clim. is applied, C i.e. where |yC| <= latBandClimRelax C externForcingPeriod :: Is the period of which forcing varies (eg. 1 month) @@ -514,7 +574,6 @@ C (use model surface (local) value if set to -1) C temp_EvPrRn :: temperature of Rain & Evap. C salt_EvPrRn :: salinity of Rain & Evap. -C trac_EvPrRn :: tracer concentration in Rain & Evap. C (notes: a) tracer content of Rain/Evap only used if both C NonLin_FrSurf & useRealFreshWater are set. C b) use model surface (local) value if set to UNSET_RL) @@ -528,13 +587,18 @@ COMMON /PARM_R/ cg2dTargetResidual, cg2dTargetResWunit, & cg2dpcOffDFac, cg3dTargetResidual, & delR, delRc, delX, delY, - & deltaT, deltaTmom, deltaTtracer, deltaTfreesurf, deltaTClock, - & abeps, startTime, + & deltaT, deltaTmom, dTtracerLev, deltaTfreesurf, deltaTClock, + & abEps, alph_AB, beta_AB, & phiMin, thetaMin, rSphere, recip_RSphere, f0, beta, - & fCori, fCoriG, fCoriCos, - & viscAh, viscAhW, viscAhMax, viscAhGrid, viscC2leith, - & viscA4, viscA4Max, viscA4Grid, viscC4leith, - & viscAr, viscAstrain, viscAtension, + & viscAh, viscAhW, viscAhMax, + & viscAhGrid, viscAhGridMax, viscAhGridMin, + & viscC2leith, viscC2leithD, + & viscC2smag, viscC4smag, + & viscAhD, viscAhZ, viscA4D, viscA4Z, + & viscA4, viscA4W, + & viscA4Max, viscA4Grid, viscA4GridMax, viscA4GridMin, + & viscAhRemax, viscA4Remax, + & viscC4leith, viscC4leithD, viscAr, & diffKhT, diffK4T, diffKrNrT, & diffKhS, diffK4S, diffKrNrS, & diffKrBL79surf, diffKrBL79deep, diffKrBL79scl, diffKrBL79Ho, @@ -543,21 +607,23 @@ & gravity, recip_Gravity, gBaro, rhonil, recip_rhonil, & recip_rhoConst, rhoConst, & rhoConstFresh, convertEmP2rUnit, tRef, sRef, - & endTime, chkPtFreq, pchkPtFreq, dumpFreq, adjDumpFreq, - & diagFreq, taveFreq, tave_lastIter, monitorFreq, + & baseTime, startTime, endTime, + & chkPtFreq, pchkPtFreq, dumpFreq, adjDumpFreq, + & diagFreq, taveFreq, tave_lastIter, monitorFreq, adjMonitorFreq, & afFacMom, vfFacMom, pfFacMom, cfFacMom, foFacMom, mtFacMom, & cosPower, cAdjFreq, omega, rotationPeriod, - & tauThetaClimRelax, lambdaThetaClimRelax, - & tauSaltClimRelax, lambdaSaltClimRelax, + & tauThetaClimRelax, + & tauSaltClimRelax, & tauTr1ClimRelax, lambdaTr1ClimRelax, latBandClimRelax, & externForcingCycle, externForcingPeriod, - & convertFW2Salt, temp_EvPrRn, salt_EvPrRn, trac_EvPrRn, + & convertFW2Salt, temp_EvPrRn, salt_EvPrRn, & hFacMinDr, hFacMinDp, & horiVertRatio, recip_horiVertRatio, & ivdc_kappa, Ro_SeaLevel, - & bottomDragLinear,bottomDragQuadratic, - & tCyl + & bottomDragLinear,bottomDragQuadratic,nh_Am2, + & tCylIn, tCylOut + _RL nh_Am2 _RL cg2dTargetResidual _RL cg2dTargetResWunit _RL cg3dTargetResidual @@ -569,9 +635,9 @@ _RL deltaT _RL deltaTClock _RL deltaTmom - _RL deltaTtracer + _RL dTtracerLev(Nr) _RL deltaTfreesurf - _RL abeps + _RL abEps, alph_AB, beta_AB _RL phiMin _RL thetaMin _RL rSphere @@ -589,16 +655,27 @@ _RL beta _RL viscAh _RL viscAhW + _RL viscAhD + _RL viscAhZ _RL viscAhMax + _RL viscAhReMax _RL viscAhGrid + _RL viscAhGridMax + _RL viscAhGridMin _RL viscC2leith - _RL viscAstrain - _RL viscAtension + _RL viscC2leithD + _RL viscC2smag + _RL viscC4smag _RL viscAr _RL viscA4 + _RL viscA4W + _RL viscA4D + _RL viscA4Z _RL viscA4Max - _RL viscA4Grid + _RL viscA4ReMax + _RL viscA4Grid, viscA4GridMax, viscA4GridMin _RL viscC4leith + _RL viscC4leithD _RL diffKhT _RL diffKrNrT(Nr) _RL diffK4T @@ -623,9 +700,7 @@ _RL convertEmP2rUnit _RL tRef(Nr) _RL sRef(Nr) - _RS fCori(1-OLx:sNx+OLx,1-OLy:sNy+OLy,nSx,nSy) - _RS fCoriG(1-OLx:sNx+OLx,1-OLy:sNy+OLy,nSx,nSy) - _RS fCoriCos(1-OLx:sNx+OLx,1-OLy:sNy+OLy,nSx,nSy) + _RL baseTime _RL startTime _RL endTime _RL chkPtFreq @@ -636,6 +711,7 @@ _RL taveFreq _RL tave_lastIter _RL monitorFreq + _RL adjMonitorFreq _RL afFacMom _RL vfFacMom _RL pfFacMom @@ -647,9 +723,7 @@ _RL omega _RL rotationPeriod _RL tauThetaClimRelax - _RL lambdaThetaClimRelax _RL tauSaltClimRelax - _RL lambdaSaltClimRelax _RL tauTr1ClimRelax _RL lambdaTr1ClimRelax _RL latBandClimRelax @@ -658,14 +732,14 @@ _RL convertFW2Salt _RL temp_EvPrRn _RL salt_EvPrRn - _RL trac_EvPrRn _RL horiVertRatio _RL recip_horiVertRatio _RL ivdc_kappa _RL Ro_SeaLevel _RL bottomDragLinear _RL bottomDragQuadratic - _RL tCyl + _RL tCylIn + _RL tCylOut C-- COMMON /PARM_A/ Thermodynamics constants ? COMMON /PARM_A/ HeatCapacity_Cp,recip_Cp @@ -708,6 +782,7 @@ LOGICAL useZONAL_FILT LOGICAL useFLT LOGICAL usePTRACERS + LOGICAL useGCHEM LOGICAL useSBO LOGICAL useSEAICE LOGICAL useBulkForce @@ -717,12 +792,16 @@ LOGICAL usediagnostics LOGICAL useEBM LOGICAL useMNC + LOGICAL useMATRIX + LOGICAL useRunClock COMMON /PARM_PACKAGES/ & useKPP, useGMRedi, useOBCS, useAIM, useLand, useECCO, & useSHAP_FILT, useZONAL_FILT, useGrdchk, useFLT, - & usePTRACERS, useSBO, useSEAICE, useThSIce, useBulkForce, - & usefizhi, usegridalt, usediagnostics, useEBM, useMNC, - & usePP81, useMY82, useOPPS, useGGL90 + & usePTRACERS, useGCHEM, + & useSBO, useSEAICE, useThSIce, useBulkForce, + & usefizhi, usegridalt, usediagnostics, useEBM, useMNC, + & usePP81, useMY82, useOPPS, useGGL90, useMATRIX, + & useRunClock CEH3 ;;; Local Variables: *** CEH3 ;;; mode:fortran ***