1 |
C $Header: /u/gcmpack/MITgcm/model/inc/PARAMS.h,v 1.140 2004/12/09 09:01:07 mlosch Exp $ |
2 |
C $Name: $ |
3 |
C |
4 |
|
5 |
CBOP |
6 |
C !ROUTINE: PARAMS.h |
7 |
C !INTERFACE: |
8 |
C #include PARAMS.h |
9 |
|
10 |
C !DESCRIPTION: |
11 |
C Header file defining model "parameters". The values from the |
12 |
C model standard input file are stored into the variables held |
13 |
C here. Notes describing the parameters can also be found here. |
14 |
|
15 |
CEOP |
16 |
|
17 |
C Macros for special grid options |
18 |
#include "PARAMS_MACROS.h" |
19 |
|
20 |
C-- Contants |
21 |
C Useful physical values |
22 |
Real*8 PI |
23 |
PARAMETER ( PI = 3.14159265358979323844D0 ) |
24 |
Real*8 deg2rad |
25 |
PARAMETER ( deg2rad = 2.D0*PI/360.D0 ) |
26 |
|
27 |
C Symbolic values |
28 |
C precXXXX :: Used to indicate what precision to use for |
29 |
C dumping model state. |
30 |
INTEGER precFloat32 |
31 |
PARAMETER ( precFloat32 = 32 ) |
32 |
INTEGER precFloat64 |
33 |
PARAMETER ( precFloat64 = 64 ) |
34 |
C UNSET_xxx :: Used to indicate variables that have not been given a value |
35 |
Real*8 UNSET_FLOAT8 |
36 |
PARAMETER ( UNSET_FLOAT8 = 1.234567D5 ) |
37 |
Real*4 UNSET_FLOAT4 |
38 |
PARAMETER ( UNSET_FLOAT4 = 1.234567E5 ) |
39 |
_RL UNSET_RL |
40 |
PARAMETER ( UNSET_RL = 1.234567D5 ) |
41 |
_RS UNSET_RS |
42 |
PARAMETER ( UNSET_RS = 1.234567E5 ) |
43 |
INTEGER UNSET_I |
44 |
PARAMETER ( UNSET_I = 123456789 ) |
45 |
|
46 |
C Checkpoint data |
47 |
INTEGER maxNoChkptLev |
48 |
PARAMETER ( maxNoChkptLev = 2 ) |
49 |
|
50 |
C-- COMMON /PARM_C/ Character valued parameters used by the model. |
51 |
C checkPtSuff :: List of checkpoint file suffices |
52 |
C bathyFile :: File containing bathymetry. If not defined bathymetry |
53 |
C is taken from inline function. |
54 |
C topoFile :: File containing the topography of the surface (unit=m) |
55 |
C (mainly used for the atmosphere = ground height). |
56 |
C hydrogThetaFile :: File containing initial hydrographic data for potential |
57 |
C temperature. |
58 |
C hydrogSaltFile :: File containing initial hydrographic data for salinity. |
59 |
C zonalWindFile :: File containing zonal wind data |
60 |
C meridWindFile :: File containing meridional wind data |
61 |
C thetaClimFile :: File containing theta climataology used |
62 |
C in relaxation term -lambda(theta-theta*) |
63 |
C saltClimFile :: File containing salt climataology used |
64 |
C in relaxation term -lambda(salt-salt*) |
65 |
C surfQfile :: File containing surface heat flux, excluding SW |
66 |
C (old version, kept for backward compatibility) |
67 |
C surfQnetFile :: File containing surface net heat flux |
68 |
C surfQswFile :: File containing surface shortwave radiation |
69 |
C dQdTfile :: File containing thermal relaxation coefficient |
70 |
C EmPmRfile :: File containing surface fresh water flux |
71 |
C saltFluxFile :: File containing surface salt flux |
72 |
C pLoadFile :: File containing pressure loading |
73 |
C buoyancyRelation :: Flag used to indicate which relation to use to |
74 |
C get buoyancy. |
75 |
C eosType :: choose the equation of state: |
76 |
C LINEAR, POLY3, UNESCO, JMD95Z, JMD95P, MDJWF, IDEALGAS |
77 |
C the_run_name :: string identifying the name of the model "run" |
78 |
COMMON /PARM_C/ checkPtSuff, |
79 |
& bathyFile, topoFile, |
80 |
& hydrogThetaFile, hydrogSaltFile, |
81 |
& zonalWindFile, meridWindFile, thetaClimFile, |
82 |
& saltClimFile, buoyancyRelation, |
83 |
& EmPmRfile, saltFluxFile, |
84 |
& surfQfile, surfQnetFile, surfQswFile, |
85 |
& uVelInitFile, vVelInitFile, pSurfInitFile, |
86 |
& dQdTfile, ploadFile, |
87 |
& eosType, pickupSuff, |
88 |
& mdsioLocalDir, |
89 |
& the_run_name |
90 |
CHARACTER*(5) checkPtSuff(maxNoChkptLev) |
91 |
CHARACTER*(MAX_LEN_FNAM) bathyFile, topoFile |
92 |
CHARACTER*(MAX_LEN_FNAM) hydrogThetaFile |
93 |
CHARACTER*(MAX_LEN_FNAM) hydrogSaltFile |
94 |
CHARACTER*(MAX_LEN_FNAM) zonalWindFile |
95 |
CHARACTER*(MAX_LEN_FNAM) meridWindFile |
96 |
CHARACTER*(MAX_LEN_FNAM) thetaClimFile |
97 |
CHARACTER*(MAX_LEN_FNAM) saltClimFile |
98 |
CHARACTER*(MAX_LEN_FNAM) surfQfile |
99 |
CHARACTER*(MAX_LEN_FNAM) surfQnetFile |
100 |
CHARACTER*(MAX_LEN_FNAM) surfQswFile |
101 |
CHARACTER*(MAX_LEN_FNAM) EmPmRfile |
102 |
CHARACTER*(MAX_LEN_FNAM) saltFluxFile |
103 |
CHARACTER*(MAX_LEN_FNAM) buoyancyRelation |
104 |
CHARACTER*(MAX_LEN_FNAM) uVelInitFile |
105 |
CHARACTER*(MAX_LEN_FNAM) vVelInitFile |
106 |
CHARACTER*(MAX_LEN_FNAM) pSurfInitFile |
107 |
CHARACTER*(MAX_LEN_FNAM) dQdTfile |
108 |
CHARACTER*(MAX_LEN_FNAM) ploadFile |
109 |
CHARACTER*(MAX_LEN_FNAM) mdsioLocalDir |
110 |
CHARACTER*(MAX_LEN_FNAM) the_run_name |
111 |
CHARACTER*(6) eosType |
112 |
CHARACTER*(10) pickupSuff |
113 |
|
114 |
C-- COMMON /PARM_I/ Integer valued parameters used by the model. |
115 |
C cg2dMaxIters :: Maximum number of iterations in the |
116 |
C two-dimensional con. grad solver. |
117 |
C cg2dChkResFreq :: Frequency with which to check residual |
118 |
C in con. grad solver. |
119 |
C cg2dPreCondFreq :: Frequency for updating cg2d preconditioner |
120 |
C (non-linear free-surf.) |
121 |
C cg3dMaxIters :: Maximum number of iterations in the |
122 |
C three-dimensional con. grad solver. |
123 |
C cg3dChkResFreq :: Frequency with which to check residual |
124 |
C in con. grad solver. |
125 |
C nIter0 :: Start time-step number of for this run |
126 |
C nTimeSteps :: Number of timesteps to execute |
127 |
C numStepsPerPickup :: For offline setup. Frequency of pickup |
128 |
C of flow fields. |
129 |
C writeStatePrec :: Precision used for writing model state. |
130 |
C writeBinaryPrec :: Precision used for writing binary files |
131 |
C readBinaryPrec :: Precision used for reading binary files |
132 |
C nCheckLev :: Holds current checkpoint level |
133 |
C nonlinFreeSurf :: option related to non-linear free surface |
134 |
C =0 Linear free surface ; >0 Non-linear |
135 |
C select_rStar :: option related to r* vertical coordinate |
136 |
C =0 (default) use r coord. ; > 0 use r* |
137 |
C tempAdvScheme :: Temp. Horiz.Advection scheme selector |
138 |
C tempVertAdvScheme :: Temp. Vert. Advection scheme selector |
139 |
C saltAdvScheme :: Salt. Horiz.advection scheme selector |
140 |
C saltVertAdvScheme :: Salt. Vert. Advection scheme selector |
141 |
C debugLevel :: debug level selector: higher -> more writing |
142 |
|
143 |
COMMON /PARM_I/ |
144 |
& cg2dMaxIters, |
145 |
& cg2dChkResFreq, cg2dPreCondFreq, |
146 |
& cg3dMaxIters, |
147 |
& cg3dChkResFreq, |
148 |
& nIter0, nTimeSteps, nEndIter, |
149 |
& numStepsPerPickup, |
150 |
& writeStatePrec, nCheckLev, |
151 |
& writeBinaryPrec, readBinaryPrec, |
152 |
& nonlinFreeSurf, select_rStar, |
153 |
& tempAdvScheme, tempVertAdvScheme, |
154 |
& saltAdvScheme, saltVertAdvScheme, |
155 |
& debugLevel |
156 |
INTEGER cg2dMaxIters |
157 |
INTEGER cg2dChkResFreq |
158 |
INTEGER cg2dPreCondFreq |
159 |
INTEGER cg3dMaxIters |
160 |
INTEGER cg3dChkResFreq |
161 |
INTEGER nIter0 |
162 |
INTEGER nTimeSteps |
163 |
INTEGER nEndIter |
164 |
INTEGER numStepsPerPickup |
165 |
INTEGER writeStatePrec |
166 |
INTEGER writeBinaryPrec |
167 |
INTEGER readBinaryPrec |
168 |
INTEGER nCheckLev |
169 |
INTEGER nonlinFreeSurf |
170 |
INTEGER select_rStar |
171 |
INTEGER tempAdvScheme, tempVertAdvScheme |
172 |
INTEGER saltAdvScheme, saltVertAdvScheme |
173 |
INTEGER debugLevel |
174 |
|
175 |
C |
176 |
INTEGER debLevZero |
177 |
PARAMETER(debLevZero=0) |
178 |
INTEGER debLevA |
179 |
PARAMETER(debLevA=1) |
180 |
INTEGER debLevB |
181 |
PARAMETER(debLevB=2) |
182 |
|
183 |
C-- COMMON /PARM_L/ Logical valued parameters used by the model. |
184 |
C usingCartesianGrid :: If TRUE grid generation will be in a cartesian |
185 |
C coordinate frame. |
186 |
C usingSphericalPolarGrid :: If TRUE grid generation will be in a |
187 |
C spherical polar frame. |
188 |
C usingCylindricalGrid :: If TRUE grid generation will be Cylindrical |
189 |
C no_slip_sides :: Impose "no-slip" at lateral boundaries. |
190 |
C no_slip_bottom :: Impose "no-slip" at bottom boundary. |
191 |
C staggerTimeStep :: enable a Stagger time stepping T,S Rho then U,V |
192 |
C momViscosity :: Flag which turns momentum friction terms on and off. |
193 |
C momAdvection :: Flag which turns advection of momentum on and off. |
194 |
C momForcing :: Flag which turns external forcing of momentum on |
195 |
C and off. |
196 |
C momPressureForcing :: Flag which turns pressure term in momentum equation |
197 |
C on and off. |
198 |
C metricTerms :: Flag which turns metric terms on or off. |
199 |
C usingSphericalPolarMTerms :: If TRUE use spherical polar metric terms. |
200 |
C useNHMTerms :: If TRUE use non-hydrostatic metric terms. |
201 |
C useCoriolis :: Flag which turns the coriolis terms on and off. |
202 |
C tempAdvection :: Flag which turns advection of temperature on |
203 |
C and off. |
204 |
C tempForcing :: Flag which turns external forcing of temperature on |
205 |
C and off. |
206 |
C saltAdvection :: Flag which turns advection of salinity on |
207 |
C and off. |
208 |
C saltForcing :: Flag which turns external forcing of salinity on |
209 |
C and off. |
210 |
C useRealFreshWaterFlux :: if True (=Natural BCS), treats P+R-E flux |
211 |
C as a real Fresh Water (=> changes the Sea Level) |
212 |
C if F, converts P+R-E to salt flux (no SL effect) |
213 |
C rigidLid :: Set to true to use rigid lid |
214 |
C implicitFreeSurface :: Set to true to use implcit free surface |
215 |
C exactConserv :: Set to true to conserve exactly the total Volume |
216 |
C uniformLin_PhiSurf :: Set to true to use a uniform Bo_surf in the |
217 |
C linear relation Phi_surf = Bo_surf*eta |
218 |
C momStepping :: Turns momentum equation time-stepping off |
219 |
C tempStepping :: Turns temperature equation time-stepping off |
220 |
C saltStepping :: Turns salinity equation time-stepping off |
221 |
C useConstantF :: Coriolis parameter set to f0 |
222 |
C useBetaPlaneF :: Coriolis parameter set to f0 + beta.y |
223 |
C useSphereF :: Coriolis parameter set to 2.omega.sin(phi) |
224 |
C useCDscheme :: use CD-scheme to calculate Coriolis terms. |
225 |
C useJamartWetPoints :: Use wet-point method for Coriolis (Jamart and Ozer, 1986) |
226 |
C useJamartMomAdv :: Use wet-point method for V.I. non-linear term |
227 |
C SadournyCoriolis :: use the enstrophy conserving scheme by Sadourny |
228 |
C upwindVorticity :: bias interpolation of vorticity in the Coriolis term |
229 |
C highOrderVorticity :: use 3rd/4th order interp. of vorticity in Coriolis |
230 |
C useAbsVorticity :: work with f+zeta in Coriolis terms |
231 |
C implicitDiffusion :: Turns implicit vertical diffusion on |
232 |
C implicitViscosity :: Turns implicit vertical viscosity on |
233 |
C tempImplVertAdv :: Turns on implicit vertical advection for Temperature |
234 |
C saltImplVertAdv :: Turns on implicit vertical advection for Salinity |
235 |
C momImplVertAdv :: Turns on implicit vertical advection for Momentum |
236 |
C multiDimAdvection :: Flag that enable multi-dimension advection |
237 |
C useMultiDimAdvec :: True if multi-dim advection is used at least once |
238 |
C forcing_In_AB :: if False, put forcing (Temp,Salt,Tracers) contribution |
239 |
C out off Adams-Bashforth time stepping. |
240 |
C doThetaClimRelax :: Set true if relaxation to temperature |
241 |
C climatology is required. |
242 |
C doSaltClimRelax :: Set true if relaxation to salinity |
243 |
C climatology is required. |
244 |
C periodicExternalForcing :: Set true if forcing is time-dependant |
245 |
C usingPCoords :: Set to indicate that we are working in a pressure |
246 |
C type coordinate (p or p*). |
247 |
C usingZCoords :: Set to indicate that we are working in a height |
248 |
C type coordinate (z or z*) |
249 |
C fluidIsAir :: Set to indicate that the fluid major constituent |
250 |
C is air |
251 |
C fluidIsWater :: Set to indicate that the fluid major constituent |
252 |
C is water |
253 |
C useDynP_inEos_Zc :: use the dynamical pressure in EOS (with Z-coord.) |
254 |
C this requires specific code for restart & exchange |
255 |
C setCenterDr :: set cell Center depth and put Interface at the middle |
256 |
C nonHydrostatic :: Using non-hydrostatic terms |
257 |
C quasiHydrostatic :: Using non-hydrostatic terms in hydrostatic algorithm |
258 |
C globalFiles :: Selects between "global" and "tiled" files |
259 |
C useSingleCpuIO :: On SGI platforms, option globalFiles is either |
260 |
C slow (f77) or does not work (f90). When |
261 |
C useSingleCpuIO is set, mdsio_writefield.F |
262 |
C outputs from master mpi process only. |
263 |
C allowFreezing :: Allows surface water to freeze and form ice |
264 |
C useOldFreezing :: use the old version (before checkpoint52a_pre, 2003-11-12) |
265 |
C groundAtK1 :: put the surface(k=1) at the Lower Boundary (=ground) |
266 |
C pickup_write_mdsio :: use mdsio to write pickups |
267 |
C pickup_read_mdsio :: use mdsio to read pickups |
268 |
C pickup_write_immed :: echo the pickup immediately (for conversion) |
269 |
C timeave_mdsio :: use mdsio for timeave output |
270 |
C snapshot_mdsio :: use mdsio for "snapshot" (dumpfreq/diagfreq) output |
271 |
C monitor_stdio :: use stdio for monitor output |
272 |
COMMON /PARM_L/ usingCartesianGrid, usingSphericalPolarGrid, |
273 |
& usingCurvilinearGrid, usingCylindricalGrid, |
274 |
& no_slip_sides,no_slip_bottom, |
275 |
& staggerTimeStep, |
276 |
& momViscosity, momAdvection, momForcing, useCoriolis, |
277 |
& momPressureForcing, vectorInvariantMomentum, |
278 |
& tempAdvection, tempForcing, |
279 |
& saltAdvection, saltForcing, |
280 |
& useRealFreshWaterFlux, |
281 |
& rigidLid, implicitFreeSurface, exactConserv, uniformLin_PhiSurf, |
282 |
& momStepping, tempStepping, saltStepping, |
283 |
& metricTerms, usingSphericalPolarMTerms, useNHMTerms, |
284 |
& useConstantF, useBetaPlaneF, useSphereF, |
285 |
& useCDscheme, |
286 |
& useEnergyConservingCoriolis, useJamartWetPoints, useJamartMomAdv, |
287 |
& SadournyCoriolis, upwindVorticity, highOrderVorticity, |
288 |
& useAbsVorticity, |
289 |
& implicitDiffusion, implicitViscosity, |
290 |
& tempImplVertAdv, saltImplVertAdv, momImplVertAdv, |
291 |
& multiDimAdvection, useMultiDimAdvec, forcing_In_AB, |
292 |
& doThetaClimRelax, doSaltClimRelax, doTr1ClimRelax, |
293 |
& periodicExternalForcing, |
294 |
& fluidIsAir, fluidIsWater, |
295 |
& usingPCoords, usingZCoords, useDynP_inEos_Zc, setCenterDr, |
296 |
& nonHydrostatic, quasiHydrostatic, globalFiles, useSingleCpuIO, |
297 |
& allowFreezing, useOldFreezing, groundAtK1, |
298 |
& usePickupBeforeC35, usePickupBeforeC54, debugMode, |
299 |
& readPickupWithTracer, writePickupWithTracer, |
300 |
& pickup_read_mdsio, pickup_write_mdsio, pickup_write_immed, |
301 |
& timeave_mdsio, snapshot_mdsio, monitor_stdio, |
302 |
& outputTypesInclusive |
303 |
|
304 |
LOGICAL usingCartesianGrid |
305 |
LOGICAL usingSphericalPolarGrid |
306 |
LOGICAL usingCylindricalGrid |
307 |
LOGICAL usingCurvilinearGrid |
308 |
LOGICAL usingSphericalPolarMTerms |
309 |
LOGICAL useNHMTerms |
310 |
LOGICAL no_slip_sides |
311 |
LOGICAL no_slip_bottom |
312 |
LOGICAL staggerTimeStep |
313 |
LOGICAL momViscosity |
314 |
LOGICAL momAdvection |
315 |
LOGICAL momForcing |
316 |
LOGICAL momPressureForcing |
317 |
LOGICAL useCoriolis |
318 |
LOGICAL vectorInvariantMomentum |
319 |
LOGICAL tempAdvection |
320 |
LOGICAL tempForcing |
321 |
LOGICAL saltAdvection |
322 |
LOGICAL saltForcing |
323 |
LOGICAL useRealFreshWaterFlux |
324 |
LOGICAL rigidLid |
325 |
LOGICAL implicitFreeSurface |
326 |
LOGICAL exactConserv |
327 |
LOGICAL uniformLin_PhiSurf |
328 |
LOGICAL momStepping |
329 |
LOGICAL tempStepping |
330 |
LOGICAL saltStepping |
331 |
LOGICAL metricTerms |
332 |
LOGICAL useConstantF |
333 |
LOGICAL useBetaPlaneF |
334 |
LOGICAL useSphereF |
335 |
LOGICAL useCDscheme |
336 |
LOGICAL useEnergyConservingCoriolis |
337 |
LOGICAL useJamartWetPoints |
338 |
LOGICAL useJamartMomAdv |
339 |
LOGICAL SadournyCoriolis |
340 |
LOGICAL upwindVorticity |
341 |
LOGICAL highOrderVorticity |
342 |
LOGICAL useAbsVorticity |
343 |
LOGICAL implicitDiffusion |
344 |
LOGICAL implicitViscosity |
345 |
LOGICAL tempImplVertAdv |
346 |
LOGICAL saltImplVertAdv |
347 |
LOGICAL momImplVertAdv |
348 |
LOGICAL multiDimAdvection |
349 |
LOGICAL useMultiDimAdvec |
350 |
LOGICAL forcing_In_AB |
351 |
LOGICAL doThetaClimRelax |
352 |
LOGICAL doSaltClimRelax |
353 |
LOGICAL doTr1ClimRelax |
354 |
LOGICAL periodicExternalForcing |
355 |
LOGICAL fluidIsAir |
356 |
LOGICAL fluidIsWater |
357 |
LOGICAL usingPCoords |
358 |
LOGICAL usingZCoords |
359 |
LOGICAL useDynP_inEos_Zc |
360 |
LOGICAL setCenterDr |
361 |
LOGICAL nonHydrostatic |
362 |
LOGICAL quasiHydrostatic |
363 |
LOGICAL globalFiles |
364 |
LOGICAL useSingleCpuIO |
365 |
LOGICAL allowFreezing |
366 |
LOGICAL useOldFreezing |
367 |
LOGICAL groundAtK1 |
368 |
LOGICAL usePickupBeforeC35 |
369 |
LOGICAL usePickupBeforeC54 |
370 |
LOGICAL debugMode |
371 |
LOGICAL readPickupWithTracer |
372 |
LOGICAL writePickupWithTracer |
373 |
LOGICAL pickup_read_mdsio, pickup_write_mdsio |
374 |
LOGICAL pickup_write_immed |
375 |
LOGICAL timeave_mdsio, snapshot_mdsio, monitor_stdio |
376 |
LOGICAL outputTypesInclusive |
377 |
|
378 |
C-- COMMON /PARM_R/ "Real" valued parameters used by the model. |
379 |
C cg2dTargetResidual |
380 |
C :: Target residual for cg2d solver; no unit (RHS normalisation) |
381 |
C cg2dTargetResWunit |
382 |
C :: Target residual for cg2d solver; W unit (No RHS normalisation) |
383 |
C cg3dTargetResidual |
384 |
C :: Target residual for cg3d solver. |
385 |
C cg2dpcOffDFac :: Averaging weight for preconditioner off-diagonal. |
386 |
C Note. 20th May 1998 |
387 |
C I made a weird discovery! In the model paper we argue |
388 |
C for the form of the preconditioner used here ( see |
389 |
C A Finite-volume, Incompressible Navier-Stokes Model |
390 |
C ...., Marshall et. al ). The algebra gives a simple |
391 |
C 0.5 factor for the averaging of ac and aCw to get a |
392 |
C symmettric pre-conditioner. By using a factor of 0.51 |
393 |
C i.e. scaling the off-diagonal terms in the |
394 |
C preconditioner down slightly I managed to get the |
395 |
C number of iterations for convergence in a test case to |
396 |
C drop form 192 -> 134! Need to investigate this further! |
397 |
C For now I have introduced a parameter cg2dpcOffDFac which |
398 |
C defaults to 0.51 but can be set at runtime. |
399 |
C delR :: Vertical grid spacing ( units of r ). |
400 |
C delRc :: Vertical grid spacing between cell centers (r unit). |
401 |
C delX :: Separation between cell faces (m) or (deg), depending |
402 |
C delY on input flags. |
403 |
C gravity :: Accel. due to gravity ( m/s^2 ) |
404 |
C recip_gravity and its inverse |
405 |
C gBaro :: Accel. due to gravity used in barotropic equation ( m/s^2 ) |
406 |
C rhoNil :: Reference density for the linear equation of state |
407 |
C rhoConst :: Vertically constant reference density |
408 |
C rhoConstFresh :: Constant reference density for fresh water (rain) |
409 |
C tRef :: reference vertical profile for potential temperature |
410 |
C sRef :: reference vertical profile for salinity/specific humidity |
411 |
C startTime :: Start time for model ( s ) |
412 |
C phiMin :: Latitude of southern most cell face. |
413 |
C thetaMin :: Longitude of western most cell face (this |
414 |
C is an "inert" parameter but it is included |
415 |
C to make geographical references simple.) |
416 |
C rSphere :: Radius of sphere for a spherical polar grid ( m ). |
417 |
C recip_RSphere :: Reciprocal radius of sphere ( m ). |
418 |
C f0 :: Reference coriolis parameter ( 1/s ) |
419 |
C ( Southern edge f for beta plane ) |
420 |
C beta :: df/dy ( s^-1.m^-1 ) |
421 |
C omega :: Angular velocity ( rad/s ) |
422 |
C rotationPeriod :: Rotation period (s) (= 2.pi/omega) |
423 |
C viscAh :: Eddy viscosity coeff. for mixing of |
424 |
C momentum laterally ( m^2/s ) |
425 |
C viscAhW :: Eddy viscosity coeff. for mixing of vertical |
426 |
C momentum laterally, no effect for hydrostatic |
427 |
C model, defaults to viscAh if unset ( m^2/s ) |
428 |
C viscAr :: Eddy viscosity coeff. for mixing of |
429 |
C momentum vertically ( units of r^2/s ) |
430 |
C viscA4 :: Biharmonic viscosity coeff. for mixing of |
431 |
C momentum laterally ( m^4/s ) |
432 |
C viscA4W :: Biharmonic viscosity coeff. for mixing of vertical |
433 |
C momentum laterally, no effect for hydrostatic |
434 |
C model, defaults to viscA4 if unset ( m^2/s ) |
435 |
C viscAhD :: Eddy viscosity coeff. for mixing of momentum laterally |
436 |
C (act on Divergence part) ( m^2/s ) |
437 |
C viscAhZ :: Eddy viscosity coeff. for mixing of momentum laterally |
438 |
C (act on Vorticity part) ( m^2/s ) |
439 |
C viscA4D :: Biharmonic viscosity coeff. for mixing of momentum laterally |
440 |
C (act on Divergence part) ( m^4/s ) |
441 |
C viscA4Z :: Biharmonic viscosity coeff. for mixing of momentum laterally |
442 |
C (act on Vorticity part) ( m^4/s ) |
443 |
C viscC2leith :: Leith non-dimensional viscosity factor |
444 |
C viscAhMax :: Maximum eddy viscosity coeff. for mixing of |
445 |
C momentum laterally ( m^2/s ) |
446 |
C viscA4Max :: Maximum biharmonic viscosity coeff. for mixing of |
447 |
C momentum laterally ( m^4/s ) |
448 |
C viscAhGrid:: non-dimensional grid-size dependent viscosity |
449 |
C viscA4Grid:: non-dimensional grid-size dependent bi-harmonic viscosity |
450 |
C viscA4GridMax:: maximum and minimum biharmonic viscosity coefficients ... |
451 |
C viscA4GridMin:: in terms of non-dimensional grid-size dependent viscosity |
452 |
C viscC4leith :: Leith non-dimensional viscosity factor |
453 |
C diffKhT :: Laplacian diffusion coeff. for mixing of |
454 |
C heat laterally ( m^2/s ) |
455 |
C diffKrNrT :: vertical profile of Laplacian diffusion coeff. |
456 |
C for mixing of heat vertically ( units of r^2/s ) |
457 |
C diffK4T :: Biharmonic diffusion coeff. for mixing of |
458 |
C heat laterally ( m^4/s ) |
459 |
C diffKhS :: Laplacian diffusion coeff. for mixing of |
460 |
C salt laterally ( m^2/s ) |
461 |
C diffKrNrS :: vertical profile of Laplacian diffusion coeff. |
462 |
C for mixing of salt vertically ( units of r^2/s ), |
463 |
C diffK4S :: Biharmonic diffusion coeff. for mixing of |
464 |
C salt laterally ( m^4/s ) |
465 |
C diffKrBL79surf :: T/S surface diffusivity (m^2/s) Bryan and Lewis, 1979 |
466 |
C diffKrBL79deep :: T/S deep diffusivity (m^2/s) Bryan and Lewis, 1979 |
467 |
C diffKrBL79scl :: depth scale for arctan fn (m) Bryan and Lewis, 1979 |
468 |
C diffKrBL79Ho :: depth offset for arctan fn (m) Bryan and Lewis, 1979 |
469 |
C deltaT :: Default timestep ( s ) |
470 |
C deltaTClock :: Timestep used as model "clock". This determines the |
471 |
C IO frequencies and is used in tagging output. It can |
472 |
C be totally different to the dynamical time. Typically |
473 |
C it will be the deep-water timestep for accelerated runs. |
474 |
C Frequency of checkpointing and dumping of the model state |
475 |
C are referenced to this clock. ( s ) |
476 |
C deltaTMom :: Timestep for momemtum equations ( s ) |
477 |
C dTtracerLev :: Timestep for tracer equations ( s ), function of level k |
478 |
C deltaTfreesurf :: Timestep for free-surface equation ( s ) |
479 |
C freesurfFac :: Parameter to turn implicit free surface term on or off |
480 |
C freesurfac = 1. uses implicit free surface |
481 |
C freesurfac = 0. uses rigid lid |
482 |
C implicSurfPress :: parameter of the Crank-Nickelson time stepping : |
483 |
C Implicit part of Surface Pressure Gradient ( 0-1 ) |
484 |
C implicDiv2Dflow :: parameter of the Crank-Nickelson time stepping : |
485 |
C Implicit part of barotropic flow Divergence ( 0-1 ) |
486 |
C hFacMin :: Minimum fraction size of a cell (affects hFacC etc...) |
487 |
C hFacMinDz :: Minimum dimesional size of a cell (affects hFacC etc..., m) |
488 |
C hFacMinDp :: Minimum dimesional size of a cell (affects hFacC etc..., Pa) |
489 |
C hFacMinDr :: Minimum dimesional size of a cell (affects hFacC etc..., units of r) |
490 |
C hFacInf :: Threshold (inf and sup) for fraction size of surface cell |
491 |
C hFacSup that control vanishing and creating levels |
492 |
C tauCD :: CD scheme coupling timescale ( 1/s ) |
493 |
C rCD :: CD scheme normalised coupling parameter ( 0-1 ) |
494 |
C startTime :: Starting time for this integration ( s ). |
495 |
C endTime :: Ending time for this integration ( s ). |
496 |
C chkPtFreq :: Frequency of rolling check pointing ( s ). |
497 |
C pChkPtFreq :: Frequency of permanent check pointing ( s ). |
498 |
C dumpFreq :: Frequency with which model state is written to |
499 |
C post-processing files ( s ). |
500 |
C diagFreq :: Frequency with which model writes diagnostic output |
501 |
C of intermediate quantities. |
502 |
C afFacMom :: Advection of momentum term tracer parameter |
503 |
C vfFacMom :: Momentum viscosity tracer parameter |
504 |
C pfFacMom :: Momentum pressure forcing tracer parameter |
505 |
C cfFacMom :: Coriolis term tracer parameter |
506 |
C foFacMom :: Momentum forcing tracer parameter |
507 |
C mtFacMom :: Metric terms tracer parameter |
508 |
C cosPower :: Power of cosine of latitude to multiply viscosity |
509 |
C cAdjFreq :: Frequency of convective adjustment |
510 |
C |
511 |
C taveFreq :: Frequency with which time-averaged model state |
512 |
C is written to post-processing files ( s ). |
513 |
C tave_lastIter :: (for state variable only) fraction of the last time |
514 |
C step (of each taveFreq period) put in the time average. |
515 |
C (fraction for 1rst iter = 1 - tave_lastIter) |
516 |
C tauThetaClimRelax :: Relaxation to climatology time scale ( s ). |
517 |
C lambdaThetaClimRelax :: Inverse time scale for relaxation ( 1/s ). |
518 |
C tauSaltClimRelax :: Relaxation to climatology time scale ( s ). |
519 |
C lambdaSaltClimRelax :: Inverse time scale for relaxation ( 1/s ). |
520 |
C latBandClimRelax :: latitude band where Relaxation to Clim. is applied, |
521 |
C i.e. where |yC| <= latBandClimRelax |
522 |
C externForcingPeriod :: Is the period of which forcing varies (eg. 1 month) |
523 |
C externForcingCycle :: Is the repeat time of the forcing (eg. 1 year) |
524 |
C (note: externForcingCycle must be an integer |
525 |
C number times externForcingPeriod) |
526 |
C convertFW2Salt :: salinity, used to convert Fresh-Water Flux to Salt Flux |
527 |
C (use model surface (local) value if set to -1) |
528 |
C temp_EvPrRn :: temperature of Rain & Evap. |
529 |
C salt_EvPrRn :: salinity of Rain & Evap. |
530 |
C (notes: a) tracer content of Rain/Evap only used if both |
531 |
C NonLin_FrSurf & useRealFreshWater are set. |
532 |
C b) use model surface (local) value if set to UNSET_RL) |
533 |
C horiVertRatio :: Ratio on units in vertical to units in horizontal. |
534 |
C recip_horiVertRatio ( 1 if horiz in m and vertical in m ). |
535 |
C ( g*rho if horiz in m and vertical in Pa ). |
536 |
C Ro_SeaLevel :: standard position of Sea-Level in "R" coordinate, used as |
537 |
C starting value (k=1) for vertical coordinate (rf(1)=Ro_SeaLevel) |
538 |
C bottomDragLinear :: Drag coefficient built in to core dynamics |
539 |
C --"-"-- Quadratic ( linear: 1/s, quadratic: 1/m ) |
540 |
COMMON /PARM_R/ cg2dTargetResidual, cg2dTargetResWunit, |
541 |
& cg2dpcOffDFac, cg3dTargetResidual, |
542 |
& delR, delRc, delX, delY, |
543 |
& deltaT, deltaTmom, dTtracerLev, deltaTfreesurf, deltaTClock, |
544 |
& abeps, startTime, |
545 |
& phiMin, thetaMin, rSphere, recip_RSphere, f0, beta, |
546 |
& fCori, fCoriG, fCoriCos, |
547 |
& viscAh, viscAhW, viscAhMax, viscAhGrid, viscC2leith, |
548 |
& viscAhD, viscAhZ, viscA4D, viscA4Z, |
549 |
& viscA4, viscA4W, |
550 |
& viscA4Max, viscA4Grid, viscA4GridMax, viscA4GridMin, |
551 |
& viscC4leith, viscAr, viscAstrain, viscAtension, |
552 |
& diffKhT, diffK4T, diffKrNrT, |
553 |
& diffKhS, diffK4S, diffKrNrS, |
554 |
& diffKrBL79surf, diffKrBL79deep, diffKrBL79scl, diffKrBL79Ho, |
555 |
& delT, tauCD, rCD, freeSurfFac, implicSurfPress, implicDiv2Dflow, |
556 |
& hFacMin, hFacMinDz, hFacInf, hFacSup, |
557 |
& gravity, recip_Gravity, gBaro, rhonil, recip_rhonil, |
558 |
& recip_rhoConst, rhoConst, |
559 |
& rhoConstFresh, convertEmP2rUnit, tRef, sRef, |
560 |
& endTime, chkPtFreq, pchkPtFreq, dumpFreq, adjDumpFreq, |
561 |
& diagFreq, taveFreq, tave_lastIter, monitorFreq, |
562 |
& afFacMom, vfFacMom, pfFacMom, cfFacMom, foFacMom, mtFacMom, |
563 |
& cosPower, cAdjFreq, omega, rotationPeriod, |
564 |
& tauThetaClimRelax, lambdaThetaClimRelax, |
565 |
& tauSaltClimRelax, lambdaSaltClimRelax, |
566 |
& tauTr1ClimRelax, lambdaTr1ClimRelax, latBandClimRelax, |
567 |
& externForcingCycle, externForcingPeriod, |
568 |
& convertFW2Salt, temp_EvPrRn, salt_EvPrRn, |
569 |
& hFacMinDr, hFacMinDp, |
570 |
& horiVertRatio, recip_horiVertRatio, |
571 |
& ivdc_kappa, Ro_SeaLevel, |
572 |
& bottomDragLinear,bottomDragQuadratic, |
573 |
& tCyl |
574 |
|
575 |
_RL cg2dTargetResidual |
576 |
_RL cg2dTargetResWunit |
577 |
_RL cg3dTargetResidual |
578 |
_RL cg2dpcOffDFac |
579 |
_RL delR(Nr) |
580 |
_RL delRc(Nr+1) |
581 |
_RL delX(Nx) |
582 |
_RL delY(Ny) |
583 |
_RL deltaT |
584 |
_RL deltaTClock |
585 |
_RL deltaTmom |
586 |
_RL dTtracerLev(Nr) |
587 |
_RL deltaTfreesurf |
588 |
_RL abeps |
589 |
_RL phiMin |
590 |
_RL thetaMin |
591 |
_RL rSphere |
592 |
_RL recip_RSphere |
593 |
_RL f0 |
594 |
_RL freeSurfFac |
595 |
_RL implicSurfPress |
596 |
_RL implicDiv2Dflow |
597 |
_RL hFacMin |
598 |
_RL hFacMinDz |
599 |
_RL hFacMinDp |
600 |
_RL hFacMinDr |
601 |
_RL hFacInf |
602 |
_RL hFacSup |
603 |
_RL beta |
604 |
_RL viscAh |
605 |
_RL viscAhW |
606 |
_RL viscAhD |
607 |
_RL viscAhZ |
608 |
_RL viscAhMax |
609 |
_RL viscAhGrid |
610 |
_RL viscC2leith |
611 |
_RL viscAstrain |
612 |
_RL viscAtension |
613 |
_RL viscAr |
614 |
_RL viscA4 |
615 |
_RL viscA4W |
616 |
_RL viscA4D |
617 |
_RL viscA4Z |
618 |
_RL viscA4Max |
619 |
_RL viscA4Grid, viscA4GridMax, viscA4GridMin |
620 |
_RL viscC4leith |
621 |
_RL diffKhT |
622 |
_RL diffKrNrT(Nr) |
623 |
_RL diffK4T |
624 |
_RL diffKhS |
625 |
_RL diffKrNrS(Nr) |
626 |
_RL diffK4S |
627 |
_RL diffKrBL79surf |
628 |
_RL diffKrBL79deep |
629 |
_RL diffKrBL79scl |
630 |
_RL diffKrBL79Ho |
631 |
_RL delt |
632 |
_RL tauCD |
633 |
_RL rCD |
634 |
_RL gravity |
635 |
_RL recip_gravity |
636 |
_RL gBaro |
637 |
_RL rhonil |
638 |
_RL recip_rhonil |
639 |
_RL rhoConst |
640 |
_RL recip_rhoConst |
641 |
_RL rhoConstFresh |
642 |
_RL convertEmP2rUnit |
643 |
_RL tRef(Nr) |
644 |
_RL sRef(Nr) |
645 |
_RS fCori(1-OLx:sNx+OLx,1-OLy:sNy+OLy,nSx,nSy) |
646 |
_RS fCoriG(1-OLx:sNx+OLx,1-OLy:sNy+OLy,nSx,nSy) |
647 |
_RS fCoriCos(1-OLx:sNx+OLx,1-OLy:sNy+OLy,nSx,nSy) |
648 |
_RL startTime |
649 |
_RL endTime |
650 |
_RL chkPtFreq |
651 |
_RL pChkPtFreq |
652 |
_RL dumpFreq |
653 |
_RL adjDumpFreq |
654 |
_RL diagFreq |
655 |
_RL taveFreq |
656 |
_RL tave_lastIter |
657 |
_RL monitorFreq |
658 |
_RL afFacMom |
659 |
_RL vfFacMom |
660 |
_RL pfFacMom |
661 |
_RL cfFacMom |
662 |
_RL foFacMom |
663 |
_RL mTFacMom |
664 |
_RL cosPower |
665 |
_RL cAdjFreq |
666 |
_RL omega |
667 |
_RL rotationPeriod |
668 |
_RL tauThetaClimRelax |
669 |
_RL lambdaThetaClimRelax |
670 |
_RL tauSaltClimRelax |
671 |
_RL lambdaSaltClimRelax |
672 |
_RL tauTr1ClimRelax |
673 |
_RL lambdaTr1ClimRelax |
674 |
_RL latBandClimRelax |
675 |
_RL externForcingCycle |
676 |
_RL externForcingPeriod |
677 |
_RL convertFW2Salt |
678 |
_RL temp_EvPrRn |
679 |
_RL salt_EvPrRn |
680 |
_RL horiVertRatio |
681 |
_RL recip_horiVertRatio |
682 |
_RL ivdc_kappa |
683 |
_RL Ro_SeaLevel |
684 |
_RL bottomDragLinear |
685 |
_RL bottomDragQuadratic |
686 |
_RL tCyl |
687 |
|
688 |
C-- COMMON /PARM_A/ Thermodynamics constants ? |
689 |
COMMON /PARM_A/ HeatCapacity_Cp,recip_Cp |
690 |
_RL HeatCapacity_Cp |
691 |
_RL recip_Cp |
692 |
|
693 |
C-- COMMON /PARM_ATM/ Atmospheric physical parameters (Ideal Gas EOS, ...) |
694 |
C celsius2K :: convert centigrade (Celsius) degree to Kelvin |
695 |
C atm_Po :: standard reference pressure |
696 |
C atm_Cp :: specific heat (Cp) of the (dry) air at constant pressure |
697 |
C atm_Rd :: gas constant for dry air |
698 |
C atm_kappa :: kappa = R/Cp (R: constant of Ideal Gas EOS) |
699 |
C atm_Rq :: water vapour specific volume anomaly relative to dry air |
700 |
C (e.g. typical value = (29/18 -1) 10^-3 with q [g/kg]) |
701 |
C integr_GeoPot :: option to select the way we integrate the geopotential |
702 |
C (still a subject of discussions ...) |
703 |
C selectFindRoSurf :: select the way surf. ref. pressure (=Ro_surf) is |
704 |
C derived from the orography. Implemented: 0,1 (see INI_P_GROUND) |
705 |
COMMON /PARM_ATM/ |
706 |
& celsius2K, |
707 |
& atm_Cp, atm_Rd, atm_kappa, atm_Rq, atm_Po, |
708 |
& integr_GeoPot, selectFindRoSurf |
709 |
_RL celsius2K |
710 |
_RL atm_Po, atm_Cp, atm_Rd, atm_kappa, atm_Rq |
711 |
INTEGER integr_GeoPot, selectFindRoSurf |
712 |
|
713 |
C Logical flags for selecting packages |
714 |
LOGICAL useOPPS |
715 |
LOGICAL usePP81 |
716 |
LOGICAL useMY82 |
717 |
LOGICAL useGGL90 |
718 |
LOGICAL useKPP |
719 |
LOGICAL useGMRedi |
720 |
LOGICAL useOBCS |
721 |
LOGICAL useAIM |
722 |
LOGICAL useLand |
723 |
LOGICAL useGrdchk |
724 |
LOGICAL useECCO |
725 |
LOGICAL useSHAP_FILT |
726 |
LOGICAL useZONAL_FILT |
727 |
LOGICAL useFLT |
728 |
LOGICAL usePTRACERS |
729 |
LOGICAL useGCHEM |
730 |
LOGICAL useSBO |
731 |
LOGICAL useSEAICE |
732 |
LOGICAL useBulkForce |
733 |
LOGICAL useThSIce |
734 |
LOGICAL usefizhi |
735 |
LOGICAL usegridalt |
736 |
LOGICAL usediagnostics |
737 |
LOGICAL useEBM |
738 |
LOGICAL useMNC |
739 |
COMMON /PARM_PACKAGES/ |
740 |
& useKPP, useGMRedi, useOBCS, useAIM, useLand, useECCO, |
741 |
& useSHAP_FILT, useZONAL_FILT, useGrdchk, useFLT, |
742 |
& usePTRACERS, useGCHEM, |
743 |
& useSBO, useSEAICE, useThSIce, useBulkForce, |
744 |
& usefizhi, usegridalt, usediagnostics, useEBM, useMNC, |
745 |
& usePP81, useMY82, useOPPS, useGGL90 |
746 |
|
747 |
CEH3 ;;; Local Variables: *** |
748 |
CEH3 ;;; mode:fortran *** |
749 |
CEH3 ;;; End: *** |