1 |
C $Header$ |
C $Header$ |
2 |
|
C $Name$ |
3 |
C |
C |
4 |
C /==========================================================\ |
C /==========================================================\ |
5 |
C | PARAMS.h | |
C | PARAMS.h | |
47 |
C checkPtSuff - List of checkpoint file suffices |
C checkPtSuff - List of checkpoint file suffices |
48 |
C bathyFile - File containing bathymetry. If not defined bathymetry |
C bathyFile - File containing bathymetry. If not defined bathymetry |
49 |
C is taken from inline function. |
C is taken from inline function. |
50 |
|
C topoFile - File containing the topography of the surface (unit=m) |
51 |
|
C (mainly used for the atmosphere = ground height). |
52 |
C hydrogThetaFile - File containing initial hydrographic data for potential |
C hydrogThetaFile - File containing initial hydrographic data for potential |
53 |
C temperature. |
C temperature. |
54 |
C hydrogSaltFile - File containing initial hydrographic data for salinity. |
C hydrogSaltFile - File containing initial hydrographic data for salinity. |
59 |
C saltClimFile - File containing salt climataology used |
C saltClimFile - File containing salt climataology used |
60 |
C in relaxation term -lambda(salt-salt*) |
C in relaxation term -lambda(salt-salt*) |
61 |
C surfQfile - File containing surface heat flux |
C surfQfile - File containing surface heat flux |
62 |
|
C surfQswfile - File containing surface shortwave radiation |
63 |
|
C dQdTfile - File containing thermal relaxation coefficient |
64 |
C EmPmRfile - File containing surface fresh water flux |
C EmPmRfile - File containing surface fresh water flux |
65 |
C buoyancyRelation - Flag used to indicate which relation to use to |
C buoyancyRelation - Flag used to indicate which relation to use to |
66 |
C get buoyancy. |
C get buoyancy. |
67 |
COMMON /PARM_C/ checkPtSuff, |
COMMON /PARM_C/ checkPtSuff, |
68 |
& bathyFile, hydrogThetaFile, hydrogSaltFile, |
& bathyFile, topoFile, |
69 |
|
& hydrogThetaFile, hydrogSaltFile, |
70 |
& zonalWindFile, meridWindFile, thetaClimFile, |
& zonalWindFile, meridWindFile, thetaClimFile, |
71 |
& saltClimFile, buoyancyRelation, |
& saltClimFile, buoyancyRelation, |
72 |
& EmPmRfile, surfQfile, |
& EmPmRfile, surfQfile, surfQswfile, |
73 |
& uVelInitFile, vVelInitFile, pSurfInitFile |
& uVelInitFile, vVelInitFile, pSurfInitFile, |
74 |
|
& dQdTfile |
75 |
CHARACTER*(5) checkPtSuff(maxNoChkptLev) |
CHARACTER*(5) checkPtSuff(maxNoChkptLev) |
76 |
CHARACTER*(MAX_LEN_FNAM) bathyFile |
CHARACTER*(MAX_LEN_FNAM) bathyFile, topoFile |
77 |
CHARACTER*(MAX_LEN_FNAM) hydrogThetaFile |
CHARACTER*(MAX_LEN_FNAM) hydrogThetaFile |
78 |
CHARACTER*(MAX_LEN_FNAM) hydrogSaltFile |
CHARACTER*(MAX_LEN_FNAM) hydrogSaltFile |
79 |
CHARACTER*(MAX_LEN_FNAM) zonalWindFile |
CHARACTER*(MAX_LEN_FNAM) zonalWindFile |
81 |
CHARACTER*(MAX_LEN_FNAM) thetaClimFile |
CHARACTER*(MAX_LEN_FNAM) thetaClimFile |
82 |
CHARACTER*(MAX_LEN_FNAM) saltClimFile |
CHARACTER*(MAX_LEN_FNAM) saltClimFile |
83 |
CHARACTER*(MAX_LEN_FNAM) surfQfile |
CHARACTER*(MAX_LEN_FNAM) surfQfile |
84 |
|
CHARACTER*(MAX_LEN_FNAM) surfQswfile |
85 |
CHARACTER*(MAX_LEN_FNAM) EmPmRfile |
CHARACTER*(MAX_LEN_FNAM) EmPmRfile |
86 |
CHARACTER*(MAX_LEN_FNAM) buoyancyRelation |
CHARACTER*(MAX_LEN_FNAM) buoyancyRelation |
87 |
CHARACTER*(MAX_LEN_FNAM) uVelInitFile |
CHARACTER*(MAX_LEN_FNAM) uVelInitFile |
88 |
CHARACTER*(MAX_LEN_FNAM) vVelInitFile |
CHARACTER*(MAX_LEN_FNAM) vVelInitFile |
89 |
CHARACTER*(MAX_LEN_FNAM) pSurfInitFile |
CHARACTER*(MAX_LEN_FNAM) pSurfInitFile |
90 |
|
CHARACTER*(MAX_LEN_FNAM) dQdTfile |
91 |
|
|
92 |
C-- COMMON /PARM_I/ Integer valued parameters used by the model. |
C-- COMMON /PARM_I/ Integer valued parameters used by the model. |
93 |
C cg2dMaxIters - Maximum number of iterations in the |
C cg2dMaxIters - Maximum number of iterations in the |
106 |
C writeBinaryPrec - Precision used for writing binary files |
C writeBinaryPrec - Precision used for writing binary files |
107 |
C readBinaryPrec - Precision used for reading binary files |
C readBinaryPrec - Precision used for reading binary files |
108 |
C nCheckLev - Holds current checkpoint level |
C nCheckLev - Holds current checkpoint level |
109 |
C nShap - "Order" of shapiro filter to apply to |
C nonlinFreeSurf - option related to non-linear free surface |
110 |
C model prognositic fields. |
C =0 Linear free surface ; >0 Non-linear |
|
C nShap == 1 => del2 |
|
|
C nShap == 2 => del4 |
|
|
C nShap == 3 => del6 |
|
|
C etc... |
|
111 |
|
|
112 |
COMMON /PARM_I/ |
COMMON /PARM_I/ |
113 |
& cg2dMaxIters, |
& cg2dMaxIters, |
118 |
& numStepsPerPickup, |
& numStepsPerPickup, |
119 |
& writeStatePrec, nCheckLev, |
& writeStatePrec, nCheckLev, |
120 |
& writeBinaryPrec, readBinaryPrec, |
& writeBinaryPrec, readBinaryPrec, |
121 |
& nShap |
& nonlinFreeSurf, |
122 |
|
& zonal_filt_sinpow, zonal_filt_cospow, |
123 |
|
& tempAdvScheme, saltAdvScheme, tracerAdvScheme |
124 |
INTEGER cg2dMaxIters |
INTEGER cg2dMaxIters |
125 |
INTEGER cg2dChkResFreq |
INTEGER cg2dChkResFreq |
126 |
INTEGER cg3dMaxIters |
INTEGER cg3dMaxIters |
133 |
INTEGER writeBinaryPrec |
INTEGER writeBinaryPrec |
134 |
INTEGER readBinaryPrec |
INTEGER readBinaryPrec |
135 |
INTEGER nCheckLev |
INTEGER nCheckLev |
136 |
INTEGER nShap |
INTEGER nonlinFreeSurf |
137 |
|
INTEGER zonal_filt_sinpow |
138 |
|
INTEGER zonal_filt_cospow |
139 |
|
INTEGER tempAdvScheme |
140 |
|
INTEGER saltAdvScheme |
141 |
|
INTEGER tracerAdvScheme |
142 |
|
|
143 |
C-- COMMON /PARM_L/ Logical valued parameters used by the model. |
C-- COMMON /PARM_L/ Logical valued parameters used by the model. |
144 |
C usingCartesianGrid - If TRUE grid generation will be in a cartesian |
C usingCartesianGrid - If TRUE grid generation will be in a cartesian |
147 |
C spherical polar frame. |
C spherical polar frame. |
148 |
C no_slip_sides - Impose "no-slip" at lateral boundaries. |
C no_slip_sides - Impose "no-slip" at lateral boundaries. |
149 |
C no_slip_bottom- Impose "no-slip" at bottom boundary. |
C no_slip_bottom- Impose "no-slip" at bottom boundary. |
150 |
|
C staggerTimeStep - enable a Stagger time stepping T,S Rho then U,V |
151 |
C momViscosity - Flag which turns momentum friction terms on and off. |
C momViscosity - Flag which turns momentum friction terms on and off. |
152 |
C momAdvection - Flag which turns advection of momentum on and off. |
C momAdvection - Flag which turns advection of momentum on and off. |
153 |
C momForcing - Flag which turns external forcing of momentum on |
C momForcing - Flag which turns external forcing of momentum on |
169 |
C and off. |
C and off. |
170 |
C saltForcing - Flag which turns external forcing of salinit on |
C saltForcing - Flag which turns external forcing of salinit on |
171 |
C and off. |
C and off. |
|
C implicitFreeSurface - Set to true to use implcit free surface |
|
172 |
C rigidLid - Set to true to use rigid lid |
C rigidLid - Set to true to use rigid lid |
173 |
|
C implicitFreeSurface - Set to true to use implcit free surface |
174 |
|
C exactConserv - Set to true to conserve exactly the total Volume |
175 |
|
C uniformLin_PhiSurf - Set to true to use a uniform Bo_surf in the |
176 |
|
C linear relation Phi_surf = Bo_surf*eta |
177 |
C momStepping - Turns momentum equation time-stepping off |
C momStepping - Turns momentum equation time-stepping off |
178 |
C tempStepping - Turns temperature equation time-stepping off |
C tempStepping - Turns temperature equation time-stepping off |
179 |
C saltStepping - Turns salinity equation time-stepping off |
C saltStepping - Turns salinity equation time-stepping off |
180 |
|
C tr1Stepping - Turns passive tracer 1 time-stepping on/off |
181 |
C useConstantF - Coriolis parameter set to f0 |
C useConstantF - Coriolis parameter set to f0 |
182 |
C useBetaPlaneF - Coriolis parameter set to f0 + beta.y |
C useBetaPlaneF - Coriolis parameter set to f0 + beta.y |
183 |
C useSphereF - Coriolis parameter set to 2.omega.sin(phi) |
C useSphereF - Coriolis parameter set to 2.omega.sin(phi) |
192 |
C coords. |
C coords. |
193 |
C usingZCoords - Set to indicate that we are working in height |
C usingZCoords - Set to indicate that we are working in height |
194 |
C coords. |
C coords. |
|
C openBoundaries - Using open-boundaries |
|
195 |
C nonHydrostatic - Using non-hydrostatic terms |
C nonHydrostatic - Using non-hydrostatic terms |
196 |
C globalFiles - Selects between "global" and "tiled" files |
C globalFiles - Selects between "global" and "tiled" files |
197 |
C allowFreezing - Allows water to freeze and form ice |
C allowFreezing - Allows water to freeze and form ice |
198 |
|
C groundAtK1 - put the surface(k=1) at the Lower Boundary (=ground) |
199 |
COMMON /PARM_L/ usingCartesianGrid, usingSphericalPolarGrid, |
COMMON /PARM_L/ usingCartesianGrid, usingSphericalPolarGrid, |
200 |
|
& usingCurvilinearGrid, |
201 |
& no_slip_sides,no_slip_bottom, |
& no_slip_sides,no_slip_bottom, |
202 |
|
& staggerTimeStep, |
203 |
& momViscosity, momAdvection, momForcing, useCoriolis, |
& momViscosity, momAdvection, momForcing, useCoriolis, |
204 |
& momPressureForcing,tempDiffusion, tempAdvection, tempForcing, |
& momPressureForcing, vectorInvariantMomentum, |
205 |
|
& tempDiffusion, tempAdvection, tempForcing, |
206 |
& saltDiffusion, saltAdvection, saltForcing, |
& saltDiffusion, saltAdvection, saltForcing, |
207 |
& implicitFreeSurface, rigidLid, |
& rigidLid, implicitFreeSurface, exactConserv, uniformLin_PhiSurf, |
208 |
& momStepping, tempStepping, saltStepping, |
& momStepping, tempStepping, saltStepping, tr1Stepping, |
209 |
& metricTerms, usingSphericalPolarMTerms, |
& metricTerms, usingSphericalPolarMTerms, |
210 |
& useConstantF, useBetaPlaneF, useSphereF, |
& useConstantF, useBetaPlaneF, useSphereF, |
211 |
& implicitDiffusion, implicitViscosity, |
& implicitDiffusion, implicitViscosity, |
212 |
& doThetaClimRelax, doSaltClimRelax, |
& doThetaClimRelax, doSaltClimRelax, doTr1ClimRelax, |
213 |
& periodicExternalForcing, usingPCoords, usingZCoords, |
& periodicExternalForcing, usingPCoords, usingZCoords, |
214 |
& openBoundaries, nonHydrostatic, globalFiles, |
& nonHydrostatic, globalFiles, |
215 |
& allowFreezing |
& allowFreezing, groundAtK1, |
216 |
|
& usePickupBeforeC35, debugMode, |
217 |
|
& readPickupWithTracer, writePickupWithTracer |
218 |
LOGICAL usingCartesianGrid |
LOGICAL usingCartesianGrid |
219 |
LOGICAL usingSphericalPolarGrid |
LOGICAL usingSphericalPolarGrid |
220 |
|
LOGICAL usingCurvilinearGrid |
221 |
LOGICAL usingSphericalPolarMTerms |
LOGICAL usingSphericalPolarMTerms |
222 |
LOGICAL no_slip_sides |
LOGICAL no_slip_sides |
223 |
LOGICAL no_slip_bottom |
LOGICAL no_slip_bottom |
224 |
|
LOGICAL staggerTimeStep |
225 |
LOGICAL momViscosity |
LOGICAL momViscosity |
226 |
LOGICAL momAdvection |
LOGICAL momAdvection |
227 |
LOGICAL momForcing |
LOGICAL momForcing |
228 |
LOGICAL momPressureForcing |
LOGICAL momPressureForcing |
229 |
LOGICAL useCoriolis |
LOGICAL useCoriolis |
230 |
|
LOGICAL vectorInvariantMomentum |
231 |
LOGICAL tempDiffusion |
LOGICAL tempDiffusion |
232 |
LOGICAL tempAdvection |
LOGICAL tempAdvection |
233 |
LOGICAL tempForcing |
LOGICAL tempForcing |
234 |
LOGICAL saltDiffusion |
LOGICAL saltDiffusion |
235 |
LOGICAL saltAdvection |
LOGICAL saltAdvection |
236 |
LOGICAL saltForcing |
LOGICAL saltForcing |
|
LOGICAL implicitFreeSurface |
|
237 |
LOGICAL rigidLid |
LOGICAL rigidLid |
238 |
|
LOGICAL implicitFreeSurface |
239 |
|
LOGICAL exactConserv |
240 |
|
LOGICAL uniformLin_PhiSurf |
241 |
LOGICAL momStepping |
LOGICAL momStepping |
242 |
LOGICAL tempStepping |
LOGICAL tempStepping |
243 |
LOGICAL saltStepping |
LOGICAL saltStepping |
244 |
|
LOGICAL tr1Stepping |
245 |
LOGICAL metricTerms |
LOGICAL metricTerms |
246 |
LOGICAL useConstantF |
LOGICAL useConstantF |
247 |
LOGICAL useBetaPlaneF |
LOGICAL useBetaPlaneF |
250 |
LOGICAL implicitViscosity |
LOGICAL implicitViscosity |
251 |
LOGICAL doThetaClimRelax |
LOGICAL doThetaClimRelax |
252 |
LOGICAL doSaltClimRelax |
LOGICAL doSaltClimRelax |
253 |
|
LOGICAL doTr1ClimRelax |
254 |
LOGICAL periodicExternalForcing |
LOGICAL periodicExternalForcing |
255 |
LOGICAL usingPCoords |
LOGICAL usingPCoords |
256 |
LOGICAL usingZCoords |
LOGICAL usingZCoords |
|
LOGICAL openBoundaries |
|
257 |
LOGICAL nonHydrostatic |
LOGICAL nonHydrostatic |
258 |
LOGICAL globalFiles |
LOGICAL globalFiles |
259 |
LOGICAL allowFreezing |
LOGICAL allowFreezing |
260 |
|
LOGICAL groundAtK1 |
261 |
|
LOGICAL usePickupBeforeC35 |
262 |
|
LOGICAL debugMode |
263 |
|
LOGICAL readPickupWithTracer |
264 |
|
LOGICAL writePickupWithTracer |
265 |
|
|
266 |
C-- COMMON /PARM_R/ "Real" valued parameters used by the model. |
C-- COMMON /PARM_R/ "Real" valued parameters used by the model. |
267 |
C cg2dTargetResidual |
C gg2dTargetResidual |
268 |
C - Target residual for cg2d solver. |
C - Target residual for cg2d solver; no unit (RHS normalisation) |
269 |
|
C cg2dTargetResWunit |
270 |
|
C - Target residual for cg2d solver; W unit (No RHS normalisation) |
271 |
C cg3dTargetResidual |
C cg3dTargetResidual |
272 |
C - Target residual for cg3d solver. |
C - Target residual for cg3d solver. |
273 |
C cg2dpcOffDFac - Averaging weight for preconditioner off-diagonal. |
C cg2dpcOffDFac - Averaging weight for preconditioner off-diagonal. |
347 |
C freesurfFac - Parameter to turn implicit free surface term on or off |
C freesurfFac - Parameter to turn implicit free surface term on or off |
348 |
C freesurfac = 1. uses implicit free surface |
C freesurfac = 1. uses implicit free surface |
349 |
C freesurfac = 0. uses rigid lid |
C freesurfac = 0. uses rigid lid |
350 |
|
C implicSurfPress - parameter of the Crank-Nickelson time stepping : |
351 |
|
C Implicit part of Surface Pressure Gradient ( 0-1 ) |
352 |
|
C implicDiv2Dflow - parameter of the Crank-Nickelson time stepping : |
353 |
|
C Implicit part of barotropic flow Divergence ( 0-1 ) |
354 |
C hFacMin - Minimum fraction size of a cell (affects hFacC etc...) |
C hFacMin - Minimum fraction size of a cell (affects hFacC etc...) |
355 |
C hFacMinDz - Minimum dimesional size of a cell (affects hFacC etc..., m) |
C hFacMinDz - Minimum dimesional size of a cell (affects hFacC etc..., m) |
356 |
C hFacMinDp - Minimum dimesional size of a cell (affects hFacC etc..., Pa) |
C hFacMinDp - Minimum dimesional size of a cell (affects hFacC etc..., Pa) |
357 |
C hFacMinDr - Minimum dimesional size of a cell (affects hFacC etc..., units of r) |
C hFacMinDr - Minimum dimesional size of a cell (affects hFacC etc..., units of r) |
358 |
|
C hFacInf - Threshold (inf and sup) for fraction size of surface cell |
359 |
|
C hFacSup that control vanishing and creating levels |
360 |
C tauCD - CD scheme coupling timescale ( 1/s ) |
C tauCD - CD scheme coupling timescale ( 1/s ) |
361 |
C rCD - CD scheme normalised coupling parameter ( 0-1 ) |
C rCD - CD scheme normalised coupling parameter ( 0-1 ) |
|
C GMmaxslope - max. slope allowed in GM/Redi tensor |
|
|
C GMlength - Length to use in Visbeck et al. formula for K (m) |
|
|
C GMalpha - alpha to use in Visbeck et al. formula for K |
|
|
C GMdepth - Depth over which to integrate Richardson # (Visbeck et al.) |
|
|
C GMkbackground - background value of GM/Redi diffusion coefficient ( m^2/s ) |
|
|
C GMmaxval - max. value of KapGM allowed in GM/Redi scheme ( m^2/s ) |
|
362 |
C startTime - Starting time for this integration ( s ). |
C startTime - Starting time for this integration ( s ). |
363 |
C endTime - Ending time for this integration ( s ). |
C endTime - Ending time for this integration ( s ). |
364 |
C chkPtFreq - Frequency of rolling check pointing ( s ). |
C chkPtFreq - Frequency of rolling check pointing ( s ). |
365 |
C pChkPtFreq - Frequency of permanent check pointing ( s ). |
C pChkPtFreq - Frequency of permanent check pointing ( s ). |
366 |
C dumpFreq - Frequency with which model state is written to |
C dumpFreq - Frequency with which model state is written to |
367 |
C post-processing files ( s ). |
C post-processing files ( s ). |
368 |
|
C diagFreq - Frequency with which model writes diagnostic output |
369 |
|
C of intermediate quantities. |
370 |
C afFacMom - Advection of momentum term tracer parameter |
C afFacMom - Advection of momentum term tracer parameter |
371 |
C vfFacMom - Momentum viscosity tracer parameter |
C vfFacMom - Momentum viscosity tracer parameter |
372 |
C pfFacMom - Momentum pressure forcing tracer parameter |
C pfFacMom - Momentum pressure forcing tracer parameter |
391 |
C ( g*rho if horiz in m and vertical in Pa ). |
C ( g*rho if horiz in m and vertical in Pa ). |
392 |
C latFFTFiltLo - Low latitude for FFT filtering of latitude |
C latFFTFiltLo - Low latitude for FFT filtering of latitude |
393 |
C circles ( see filter*.F ) |
C circles ( see filter*.F ) |
394 |
COMMON /PARM_R/ cg2dTargetResidual, cg2dpcOffDFac, |
C Ro_SeaLevel - standard position of Sea-Level in "R" coordinate, used as |
395 |
& cg3dTargetResidual, |
C starting value (k=1) for vertical coordinate (rf(1)=Ro_SeaLevel) |
396 |
|
C bottomDragLinear - Drag coefficient built in to core dynamics |
397 |
|
C " Quadratic ( linear: 1/s, quadratic: 1/m ) |
398 |
|
COMMON /PARM_R/ cg2dTargetResidual, cg2dTargetResWunit, |
399 |
|
& cg2dpcOffDFac, cg3dTargetResidual, |
400 |
& delP, delZ, delR, delX, delY, |
& delP, delZ, delR, delX, delY, |
401 |
& deltaT,deltaTmom, deltaTtracer, deltaTClock,abeps, startTime, |
& deltaT,deltaTmom, deltaTtracer, deltaTClock,abeps, startTime, |
402 |
& phiMin, thetaMin, rSphere, recip_RSphere, f0, fCori, beta, |
& phiMin, thetaMin, rSphere, recip_RSphere, f0, beta, |
403 |
& viscAh, viscAz, viscA4, viscAr, |
& fCori, fCoriG, |
404 |
|
& viscAh, viscAz, viscA4, viscAr, viscAstrain, viscAtension, |
405 |
& diffKhT, diffKzT, diffK4T, diffKrT, |
& diffKhT, diffKzT, diffK4T, diffKrT, |
406 |
& diffKhS, diffKzS, diffK4S, diffKrS, |
& diffKhS, diffKzS, diffK4S, diffKrS, |
407 |
& delT, tauCD, rCD, freeSurfFac, hFacMin, hFacMinDz, |
& delT, tauCD, rCD, freeSurfFac, implicSurfPress, implicDiv2Dflow, |
408 |
& GMmaxslope,GMlength,GMalpha,GMdepth,GMkbackground,GMmaxval, |
& hFacMin, hFacMinDz, hFacInf, hFacSup, |
409 |
& gravity, recip_Gravity, gBaro, rhonil, recip_rhonil, |
& gravity, recip_Gravity, gBaro, rhonil, recip_rhonil, |
410 |
& recip_rhoConst, rhoConst, tRef, sRef, |
& recip_rhoConst, rhoConst, tRef, sRef, |
411 |
& endTime, chkPtFreq, pchkPtFreq, dumpFreq, taveFreq, |
& endTime, chkPtFreq, pchkPtFreq, dumpFreq, |
412 |
|
& diagFreq, taveFreq, monitorFreq, |
413 |
& afFacMom, vfFacMom, pfFacMom, cfFacMom, foFacMom, mtFacMom, |
& afFacMom, vfFacMom, pfFacMom, cfFacMom, foFacMom, mtFacMom, |
414 |
& cosPower, |
& cosPower, cAdjFreq, omega, |
415 |
& cAdjFreq, omega, tauThetaClimRelax, lambdaThetaClimRelax, |
& tauThetaClimRelax, lambdaThetaClimRelax, |
416 |
& tauSaltClimRelax, lambdaSaltClimRelax, |
& tauSaltClimRelax, lambdaSaltClimRelax, |
417 |
|
& tauTr1ClimRelax, lambdaTr1ClimRelax, |
418 |
& externForcingCycle, externForcingPeriod, |
& externForcingCycle, externForcingPeriod, |
419 |
& viscAp, diffKpT, diffKpS, hFacMinDr, hFacMinDp, |
& viscAp, diffKpT, diffKpS, hFacMinDr, hFacMinDp, |
420 |
& theta_S, specVol_S, horiVertRatio, recip_horiVertRatio, |
& theta_S, specVol_S, horiVertRatio, recip_horiVertRatio, |
421 |
& latFFTFiltLo, ivdc_kappa |
& latFFTFiltLo, ivdc_kappa, Ro_SeaLevel, zonal_filt_lat, |
422 |
|
& bottomDragLinear,bottomDragQuadratic |
423 |
|
|
424 |
_RL cg2dTargetResidual |
_RL cg2dTargetResidual |
425 |
|
_RL cg2dTargetResWunit |
426 |
_RL cg3dTargetResidual |
_RL cg3dTargetResidual |
427 |
_RL cg2dpcOffDFac |
_RL cg2dpcOffDFac |
428 |
_RL delZ(Nr) |
_RL delZ(Nr) |
441 |
_RL recip_RSphere |
_RL recip_RSphere |
442 |
_RL f0 |
_RL f0 |
443 |
_RL freeSurfFac |
_RL freeSurfFac |
444 |
|
_RL implicSurfPress |
445 |
|
_RL implicDiv2Dflow |
446 |
_RL hFacMin |
_RL hFacMin |
447 |
_RL hFacMinDz |
_RL hFacMinDz |
448 |
_RL hFacMinDp |
_RL hFacMinDp |
449 |
_RL hFacMinDr |
_RL hFacMinDr |
450 |
|
_RL hFacInf |
451 |
|
_RL hFacSup |
452 |
_RL beta |
_RL beta |
453 |
_RL viscAh |
_RL viscAh |
454 |
|
_RL viscAstrain |
455 |
|
_RL viscAtension |
456 |
_RL viscAz |
_RL viscAz |
457 |
_RL viscAp |
_RL viscAp |
458 |
_RL viscAr |
_RL viscAr |
470 |
_RL delt |
_RL delt |
471 |
_RL tauCD |
_RL tauCD |
472 |
_RL rCD |
_RL rCD |
|
_RL GMmaxslope |
|
|
_RL GMlength |
|
|
_RL GMalpha |
|
|
_RL GMdepth |
|
|
_RL GMkbackground |
|
|
_RL GMmaxval |
|
473 |
_RL gravity |
_RL gravity |
474 |
_RL recip_gravity |
_RL recip_gravity |
475 |
_RL gBaro |
_RL gBaro |
481 |
_RL tRef(Nr) |
_RL tRef(Nr) |
482 |
_RL theta_S(Nr) |
_RL theta_S(Nr) |
483 |
_RL sRef(Nr) |
_RL sRef(Nr) |
484 |
_RS Fcori(1-OLx:sNx+OLx,1-OLy:sNy+OLy,nSx,nSy) |
_RS fCori(1-OLx:sNx+OLx,1-OLy:sNy+OLy,nSx,nSy) |
485 |
|
_RS fCoriG(1-OLx:sNx+OLx,1-OLy:sNy+OLy,nSx,nSy) |
486 |
_RL startTime |
_RL startTime |
487 |
_RL endTime |
_RL endTime |
488 |
_RL chkPtFreq |
_RL chkPtFreq |
489 |
_RL pChkPtFreq |
_RL pChkPtFreq |
490 |
_RL dumpFreq |
_RL dumpFreq |
491 |
|
_RL diagFreq |
492 |
_RL taveFreq |
_RL taveFreq |
493 |
|
_RL monitorFreq |
494 |
_RL afFacMom |
_RL afFacMom |
495 |
_RL vfFacMom |
_RL vfFacMom |
496 |
_RL pfFacMom |
_RL pfFacMom |
504 |
_RL lambdaThetaClimRelax |
_RL lambdaThetaClimRelax |
505 |
_RL tauSaltClimRelax |
_RL tauSaltClimRelax |
506 |
_RL lambdaSaltClimRelax |
_RL lambdaSaltClimRelax |
507 |
|
_RL tauTr1ClimRelax |
508 |
|
_RL lambdaTr1ClimRelax |
509 |
_RL externForcingCycle |
_RL externForcingCycle |
510 |
_RL externForcingPeriod |
_RL externForcingPeriod |
511 |
_RL horiVertRatio |
_RL horiVertRatio |
512 |
_RL recip_horiVertRatio |
_RL recip_horiVertRatio |
513 |
_RL latFFTFiltLo |
_RL latFFTFiltLo |
514 |
_RL ivdc_kappa |
_RL ivdc_kappa |
515 |
|
_RL Ro_SeaLevel |
516 |
|
_RL zonal_filt_lat |
517 |
|
_RL bottomDragLinear |
518 |
|
_RL bottomDragQuadratic |
519 |
|
|
520 |
COMMON /PARM_A/ HeatCapacity_Cp,recip_Cp, |
COMMON /PARM_A/ HeatCapacity_Cp,recip_Cp, |
521 |
& Lamba_theta |
& Lamba_theta |
534 |
_RL sBeta |
_RL sBeta |
535 |
character*(6) eosType |
character*(6) eosType |
536 |
|
|
537 |
C These are input arrays (of integers) that contain the *absolute* |
C Atmospheric physical parameters (Ideal Gas EOS, ...) |
538 |
C computational index of an open-boundary (OB) point. |
C atm_po - standard reference pressure |
539 |
C A zero (0) element means there is no corresponding OB in that column/row. |
C atm_cp - specific heat (Cp) of the (dry) air at constant pressure |
540 |
C The computational coordinate refers to "tracer" cells. |
C atm_kappa - kappa = R/Cp (R: constant of Ideal Gas EOS) |
541 |
C For a northern/southern OB, the OB V point is to the south/north. |
C Integr_GeoPot - option to select the way we integrate the geopotential |
542 |
C For an eastern/western OB, the OB U point is to the west/east. |
C (still a subject of discussions ...) |
543 |
C eg. |
COMMON /PARM_ATM/ atm_cp, atm_kappa, atm_po, |
544 |
C OB_Jnorth(3)=34 means that: |
& Integr_GeoPot |
545 |
C T( 3 ,34) is a an OB point |
_RL atm_cp, atm_kappa, atm_po |
546 |
C U(3:4,34) is a an OB point |
INTEGER Integr_GeoPot |
547 |
C V( 4 ,34) is a an OB point |
|
548 |
C while |
C Logical flags for selecting packages |
549 |
C OB_Jsouth(3)=1 means that: |
LOGICAL useKPP |
550 |
C T( 3 ,1) is a an OB point |
LOGICAL useGMRedi |
551 |
C U(3:4,1) is a an OB point |
LOGICAL useOBCS |
552 |
C V( 4 ,2) is a an OB point |
LOGICAL useAIM |
553 |
C |
LOGICAL useGrdchk |
554 |
C For convenience, negative values for Jnorth/Ieast refer to |
LOGICAL useECCO |
555 |
C points relative to the Northern/Eastern edges of the model |
LOGICAL useSHAP_FILT |
556 |
C eg. OB_Jnorth(3)=-1 means that the point (3,Ny-1) is a northern O-B. |
COMMON /PARM_PACKAGES/ |
557 |
C |
& useKPP, useGMRedi, useOBCS, useAIM, useECCO, |
558 |
COMMON /PARM_OB/ |
& useSHAP_FILT, useGrdchk |
559 |
& OB_Jnorth,OB_Jsouth,OB_Ieast,OB_Iwest |
|
|
INTEGER OB_Jnorth(Nx) |
|
|
INTEGER OB_Jsouth(Nx) |
|
|
INTEGER OB_Ieast(Ny) |
|
|
INTEGER OB_Iwest(Ny) |
|