--- MITgcm/doc/tag-index 2005/07/31 00:03:27 1.528 +++ MITgcm/doc/tag-index 2006/06/22 19:39:21 1.685 @@ -1,9 +1,526 @@ -$Header: /home/ubuntu/mnt/e9_copy/MITgcm/doc/tag-index,v 1.528 2005/07/31 00:03:27 jmc Exp $ +$Header: /home/ubuntu/mnt/e9_copy/MITgcm/doc/tag-index,v 1.685 2006/06/22 19:39:21 baylor Exp $ $Name: $ Notes on tags used in MITgcmUV ============================== +o Pass variable viscosities (vertical and horizontal, e.g., KPP or Leith) + to W momentum equation in nonhydrostatic and quasihydrostatic runs. +o make exf_monitor & seaice_monitor independant of the main (dynamics) monitor. +o pkg/seaice: fix SEAICEuseEVPpickup parameter (put it in a commom block) +o generic_advdiff: DST advection S/R : use local copy of velocity to compute CFL + (problems ? with gradient check in bottom_ctrl_5x5 adjoint test) +o tracer advection: + - clean-up and simplify calc_common_factors.F + - make a local copy of velocity and pass it (as u,v,r_Trans) to DST tracer + advection subroutine (but still not used within DST advection S/R) +o rename pkg aim_ocn_coupler to atm_ocn_coupler (later on, will be used without aim) + +checkpoint58j_post +o new driver S/R: LOAD_FIELDS_DRIVER to load external forcing fields + from file (collects calls previously in FORWARD_STEP) +o move call to SEAICE_MODEL from FORWARD_STEP to DO_OCEANIC_PHYS +o adjoint store dir. adjusted accordingly +o genmake2 + replace target "ad_taf" by $(EXE_AD) ; add $(EXE_AD) to the make CLEAN list. + +checkpoint58i_post +o pkg/seaice: add parameter that allows to scale/turn off effect of seaice + on wind stress (SEAICEstressFactor defaults to 1.) +o Total number of Timers is finite (<=40): comment out 2 non-essential one + in the_main_loop.F to avoid Pb (e.g., when running fizhi test) +o vector_invariant: fix highOrderVorticity(=4.th.Order) advection + on CS-grid: no longer loosing mass. +o exf & curvilinear-grid: no longer modify longitude xC & xG. +o pkg/ggl90: fix sloppy output and fix a bug +o pkg/seaice: added SEAICEuseEVPpickup parameter + - Set to false in order to start EVP solver with + non-EVP pickup files when using SEAICEuseEVP + - fix sign error in diffusion in seaice_calc_rhs + +checkpoint58h_post +* Modifications for bottom topography control + o replace hFacC by _hFacC at various places + o replace ALLOW_HFACC_CONTROL by ALLOW_DEPTH_CONTROL + o add non-self-adjoint cg2d_nsa + o update autodiff support routines + o re-initialise hfac after ctrl_depth_ini + o works for 5x5 box, doesnt work for global_ocean.90x40x15 +* Adding verification for 5x5 box (4-layer) bottom topography control + +checkpoint58g_post +o pkg/diagnostics: implement "periodic averaging diagnostics" (e.g., + used for mean seasonal cycle, mean diurnal cycle); add an example + in verification/global_ocean.cs32x15/input.thsice/data.diagnostics +o pkg/ggl90: + - add parameter (minimum surface kinetic energy) + - fix bug (avoiding division by zero) +o couple pkg/thsice to pkg/seaice: + - modify advection in seaice to accomodate new scalar fields to be advected + - only muliDimAdection scheme work with seaice/thsice + - mapping of thsice-variables to seaice-variables, back and forth + - does not break the verification experiments, but does not give the + desired results either +o pkg/seaice + - make (default) second order advection a bit less confusing? + +checkpoint58f_post +o couple pkg/thsice and pkg/exf (as a preparation for coupling pkg/thsice + to pkg/seaice): + - new routines thsice_map_exf and thsice_get_exf provide the interface + - add an additional formal parameter to thsice_solve4temp +o pkg/exf: + - add new fields wspeed, snowprecip (to be able to couple to thsice) + - correct Stefan-Boltzmann constant + - new parameter for longwave surface emittance + - separate some stuff from exf_bulkformulae into new routines + exf_radiation, exf_wind + - add new parameters and constants: longwave emissivity for ocean, ice + and snow, evaporation parameters over ice + - decouple wind/stress computation from ALLOW_BULKFORMULA: always compute + either wind from stress or stress from wind +o pkg/thSIce: +- split thsice_step_fwd.F in 2 S/R: thsice_step_temp.F & thsice_step_fwd.F +- put i,j loops inside S/R: THSICE_ALBEDO, THSICE_SOLVE4TEMP, THSICE_EXTEND + and THSICE_CALC_THICKN +- for now, call to THSICE_GET_BULKF remains inside i,j loops. +- add CPP option: ALLOW_DBUG_THSICE and header file THSICE_DEBUG.h + to make debugging easier. +- affects results (@ truncation level) of global_ocean.cs32x15.thsice: update output +o pkg/bulk_force: + - clean-up comments and parameters ; + - add new Bulk-Formulae from Large and Yeager, 2004, NCAR/TN-460+STR ; +o fix bug in aim+thsice albedo: snow & ice thickness arguments were switched; + generate new output for test-experiment: aim.5l_cs.thSI +o results_ad : rename "output.txt_adm" to "output_adm.txt" and change + testreport accordingly + +checkpoint58e_post +o SEAICE_CGRID adjoint done +o R_STAR adjoint implemented. + * Seems to just work (based on global_ocean.90x40x15/code_ad_nlfs/ ) + * need to sort out init. of h0facc, etc. +o Make pkg/profile fully independent of ecco,cost, etc. stuff + to be able to use it in pure forward. + +checkpoint58d_post +o upgrade simple test-experiment to tutorial example: + step.1: duplicate the experiment and (step.2) will remove the old copy. + tutorial_barotropic_gyre <- copy of exp0 (R1:barotropic_gyre_in_a_box) + tutorial_baroclinic_gyre <- copy of exp1 (R1:baroclinic_gyre_on_a_sphere) + tutorial_global_oce_latlon <- empty for now (R1:global_ocean_circulation) + tutorial_global_oce_biogeo <- copy of dic_example + tutorial_deep_convection <- almost like exp5 (R1:nonhydrostatic_deep_convection) + tutorial_plume_on_slope <- copy of plume_on_slope + tutorial_tracer_adjsens <- copy of carbon (R1:tracer_adjoint_sensitivity) + tutorial_global_oce_optim <- empty for now (David ?) + tutorial_global_oce_in_p <- copy of global_ocean_pressure + some tutorials (R1) were already checked-in under tutorial_examples in release1_branch +o correct a sign problem in cost_scat.F +o obcs and ptracers: fix boundary conditions for advections schemes + with larger stencil +o thsice adjoint: start +o mom_vecinv: add ISOTROPIC_COS_SCALING flags to mom_vi_hdissip for + completeness +o mom_fluxform: fixing the mutual use of ISOTROPIC_COS_SCALING + and COSINEMETH_III, add comments in default CPP_OPTIONS.h +o ptracers adjoint: + * avoid extensive recomputatations + * fix missing re-init. of gptr (missed by TAF) +o obcs: add a flag (OBCSprintDiags, defaults is true) that allows + me to turn off the excessive output to STDOUT that this package produces +o move NH metric terms & 3.D Coriolis S/R to pkg/mom_common + and add those terms in Vector-Invariant formulation. +o in ctrl pkg, if ALLOW_CAL, use monthly mean controls + if the control period (xx_hfluxperiod etc) is 0 +o in profiles pkg, clean routines and fix details +o in ecco pkg, reading ssh data: + fix problem in case the model does not start at iter0=0 +o fix mnc-pickup/restart for ptracers +o new package prifiles: + code to compute profile-based cost by Gael Forget + (modifs in ecco, ctrl, autodiff) +o Benign bug fix in initialization (spotted by M. Mazloff) of + ctrl_set_globfld_xz.F ctrl_set_globfld_yz.F + +checkpoint58c_post +o adjoint: finish NLFS adjoint and provide reference output in + verification/global_ocean.90x40x15/results_ad_nlfs +o seaice: add an EVP solver following Hunke and Dukowicz (1997) and the + documentation of CICE. Turn on by defining SEAICE_ALLOW_EVP in + SEAICE_OPTIONS.h and SEAICEuseEVP=.true. in data.seaice. Works only + with SEAICE_CGRID defined. +o move calendarDumps from "data" to "data.cal" and clean-up the code + with a simple call to pkg/cal S/R: CAL_TIME2WRITE +o add useEXF & useCAL flags (for now, set in hard-coded way) +o add S/R to compute NH-metrics terms & Coriolis f' in vertical momentum + (were missing in NH mode, and wrong in quasihydrostatic mode). + waiting for Chris updated version of calc_gw to add those CALLs. +o fix bug in quasihydrostatic S/R ; + add a test for this option: global_ocean.90x40x15.qshyd +o new S/R "SET_PARMS": set parameters that might depend on the use of some pkgs. + (called from INITIALISE_FIXED, after INI_PARMS & PACKAGES_READPARAMS) +o add on/off flag useOffLine for package OFFLINE +o seaice: + - modify advection so that it works also on the C-grid + - extend loop ranges in seaice_lsr and seaice_dynsolver; fixes + problem in multi-tile runs with C-grid + - add flags for clipping ice velocities and/or masking solver forcing + - fix drag (ocean on ice) formulation and a bug that caused noise in the + C-grid solver + - added a few comments to seaice_diffusion.F + - separate C-grid and B-grid versions more cleanly (UVM and seaiceMaskU/V + are now exclusive) + - add a new ocean-ice stress coupling method (Hibler and Bryan, 1987) which + required re-ordering the code a little: + + make DAIRN global variable (defined in SEAICE) + + move computation of the viscosities eta and zeta into a new separate + routine (because I need to recompute them in seaice_ocean_stress.F) + +checkpoint58b_post +o AIM+thSIce: fix sign of Short-Wave through the Ice ; + update output.txt of exp. aim.5l_cs.thSI +o various mnc cleanups and improvements: + + shrink lookup tables by factor of ~4 + + better error reporting when running out of lookup space + + able to handle longer path/file names (up to 500 chars) +o adjoint: + - Another overhaul of store dirs. for NLFS to eliminate "hidden" recomputations. + - TBD: "hidden" mom_vecinv recomp. in dynamics +o change forcing_In_AB to affects both T,S forcing and Momentum forcing + (allow to differentiate between forcing components using new integer flags: + momForcingOutAB=1/0 & tracForcingOutAB=1/0) + and add new flag to put Dissipation tendency out of Adams-Bashforth. +o ecco + - enable trend removal from SSH anomaly obs. +o adjoint + - a fix for PmEpR when #undef EXACT_CONSERV + - fix of "hidden" recomp. in thermodynamics (no TAF warnings) + - try to fix "hidden" recomp. in forward_step for NLFS + (NLFS seems broken sometimes after I checked it in) +o seaice: + - add c-grid version of the dynamic solver: + + three new routines that are the c-grid substitute lsr, dynsolver + and ostres + + put a few fields that were local to dynsolver into global common + blocks, so that I can move the computation of stresses etc into + seaice_lsr (saves coding but may break the adjoint). + - replace more hardwired parameters by runtime parameters + - add ice masks that mask the rhs of the implicit solvers where there + is no ice (commented out in seaice_dynsolver, because i am not sure + if this works properly), eventually this should replace the clipping + of ice velocities in seaice_dynsolver to +/-40cm/s. +o remove the BUILD_INFO.h include from CPP_EEOPTIONS.h and explicitly + include it only where its needed +o move balancing of fluxes before the call of external_forcing_surf +o seaice: + - correct units of turning angles (now they are really in degrees) + - move computation of GWATX/Y out of main routine into dynsolver + - initialize GWATX/Y in seaice_init +o Apply mask on Fresh-Water flux (needed for SSH forcing). + update output.txt of exp. global_ocean_ebm & cpl_aim+ocn (affects cg2d residual) +o seaice: add runtime flags for turning angles (default to zero) +o Adding runtime parameter to exf/, ctrl/, to remove on-the-fly global mean + and trend from exf forcing and ctrl control adjustments +o fix variable aliasing in gad_calc_rhs that cannot be handled by TAF + (since checkpoint57x_post) +o change the default rotation period to 86164.s = the Earth rotation +o 1rst implementation of Implicit IGW using the 3-D solver (use3Dsolver=T) + and based on a reference stratification. Tested within hs94.cs-32x32x5. +o seaice advection: add code for choosing between the default (2nd order + central differences) and multiDim advection schemes provided by + pkg/generic_advdiff +o seaice: + - removed all references to SEAICE_GRID.h fields from + dynsolver, advect, diffus, lsr, without changing the results of lab_sea + (cubed-sphere configuration will change a little) + - grid computations in seaice_init are obsolete now. + - cleaned up code a little so that is easier to read (hopefully). + - added new (better?) discretizations of default advection and diffusion + (turn on with SEAICEuseFluxForm) + - replace 1 in 3d global fields by kSurface in growth.F + +checkpoint58a_post +o seaice: + - bug fix in advect.F +o shelfice: + - separate shelfice load anomaly from pload (breaks with time + dependent forcing), => introduce constant field shelficeLoadAnomaly. + Its default is 0., but it may be computed more cleverly from (unknown) + t- and s-profiles (tRef, sRef) and actual EOS. For now this has to be + done offline. A good approximation of the pressure load anomaly is + necessary to avoid large initial adjustment processes underneath + deep-reaching shelfice. + - small fix in ISOMIP shelfice_thermodynamics + - add more sophisticated thermodynamics of Hellmer (1989), this is + now the default + - give a few constants more intuitive names +o add code to balance EmPmP and Qnet at the end of do_ocean_physics. Useful + if bulk formulae are used in long integration (especially EmPmR). Turn + on with balanceEmPmR = .true. or balanceQnet = .true. in data, PARM01 + if balancePrintMean, the imbalance that is substracted is printed to + STDOUT. +o fix bug (typo) in obcs_apply_eta.F +o add a new package shelfice which enables us to model the circulation + underneath shelf-ice with draughts of hundreds of meters. + - works + - to do: + include improved thermodynamics + + check whether kSurfC (from model/inc/SURFACE.h) can be used + instead of new field kTopC + + can we use topoFile, Ro_surf and existing code in ini_depth.F + instead of new field R_shelfIce and new code in ini_depth.F + and ini_mask_etc.F? + + adjust vertical mixing schemes? +o seaice pkg: + - add a cpp-flag to include a simple formula for a salinity dependent + freezing point of sea water at the surface + - change the contents of SEAICE_TEST_ICE_STRESS_1 so that zonal and + meridional stresses are now different (and hopefully correct) +o AIM pkg: change threshold on large-scale condensation to conserve Heat. + update results of aim.5l_LatLon test ; fix title & units of AIM diagnostics + and change 3 diagnostics names (OSR,OSRCLR,KM -> TSR,TSRCLR,DRAG) +o pkg/diagnostics: add options and parameters for regional-statistics + diagnostics ; define regions by reading a region-mask from a file + (might add other options later) +o pkg/bulk_force: + - add option and parameters to use AIM surface-flux formulae. + - Change loading part: S/R BULKF_FIELDS_LOAD only take care of bulkf_fields ; + others forcing fields (defined in PARM05, parameter file "data") are loaded + from S/R EXTERNAL_FIELDS_LOAD, as usually (with useBulkforce = T or F). + - initialise all bulkf_fields in bulkf_init.F ; do in-lining of exf_bulkcdn.F + - use the right EXCH call for uwind,vwind (to work on CS-grid). + - re-arrange header files (move parameters from BULKF.h to BULKF_PARAMS.h) + and parameters (note: calcWindStress replaces .NOT.readwindstress). + - cleaner interface with pkg/thSIce (new S/R THSICE_GET_PRECIP). + +checkpoint58 +o add "--embed-source" option to genmake2 which, when the supporting + tools can be compiled (as determined by genmake2) will turn on the + embed_files package which then embeds the entire MITgcm source code + (*.[fFhc] + Makefile) used for the build within the executable + - requested by CNH but off by default + - adds a paltry <9MB to the mitgcmuv executable in most cases + - only writes the output when useEMBEDSRC in eedata is true +o clean up 3-dim. relaxation codes: + * Fix I/O inconsistency in pkg/rbcs: replace precFloat32 by readBinaryPrec + * Remove 3-dim. relaxation code from pkg/exf (now use only pkg/rbcs) + * Thanks to Tom Haine for testing! + +checkpoint57z_post +o make CG3D solver compatible with Free-surface at k > 1 (p-coordinate): + affects output (@ truncation level) of exp. plume_on_slope ; updated. +o fix the pickup behavior for obcs in combination with ptracers +o fix a bug in ptracers_external_fields_load +o no AB-2 at the first iteration for Gw (consistent with Gu,Gv,Gt,Gs ...) + affects results of NH experiments (but all our NH tests have Gw[it=1]==0 !!) +o transfered surface NH pressure to eta field (if exactConserv). +o gmredi: fix bugs in slope tapering ldd97 (depthZ had the wrong sign) + and update lab_sea output.txt file. +o completing 3-dim. relaxation code: additional term + 1/tau*( theta(i,j,k) - thetaStar(i,j,k) ) + in S/R EXTERNAL_FORCING_T (file external_forcing.F) + * At compile time, in "EXF_OPTIONS.h" set + #define ALLOW_CLIMTEMP_RELAXATION + #define ALLOW_CLIMSALT_RELAXATION + * At runtime in "data", under &PARM03 set (e.g., units in seconds) + tauThetaClimRelax3Dim = 15552000.0, + tauSaltClimRelax3Dim = 15552000.0, + * 3 cases: + 1) Use a constant-in-time 3-dim. field + 2) Provide 12 3-dim. fields corresponding to Jan., ... , Dec. + 3) Real-time relax. to time-evolving prescribed field +o Adding Laplacian-type smoothness constraint on + initial and boundary (forcing) controls (ic, bc) + * enable at compile-time via + ALLOW_SMOOTH_IC_COST_CONTRIBUTION, ALLOW_SMOOTH_BC_COST_CONTRIBUTION + * enable at run-time via mult_smooth_ic = 1, mult_smooth_bc = 1 + * Absolute scale somewhat unclear so far + * no area weighting was included since no other cost term does so far + +checkpoint57y_post +First step for a NLFS adjoint +o initially suppress rStar (new flag DISABLE_RSTAR_CODE) +o new init. routines for calc_r_star, calc_surf_dr +o still need to deal with ini_masks_etc +o testreport seemed happy +checkpoint57y_pre + +o obcs: always reset wVel & eta (to zero or prescribe it) at the OBs. +o add new package rbcs (for relaxing ptracers at boundaries/depth/surface etc) +o add new offset feature to offline pkg (plus minor cleanup) +o cfc fixes for final year of integration +o clean up GCHEM_OPTIONS.h/DIC_OPTIONS.h (all options should + be in GCHEM_OPTIONS). + +checkpoint57x_post +o fix testreport Pb in multiple test experiment. +o cleanup our namelist syntax in verification: + - make it more F95 standards compliant (some work still needed) + - allows the vast majority of our tests to work with gfortran +o Non-Hydrostatic: + - put all NH variables (formerly in DYNVARS.h & GW.h) in NH_VARS.h + - fix exchange calls for CS-grid using the new EXCH_S3D_RL. +o Allow to apply AB on T,S rather than on AB(gT,gS): + - implemented within #ifdef ALLOW_ADAMSBASHFORTH_3 + - use the same arrays (gtNm,gsNm) to hold tracer field at previous + time-steps (if AB(T,S)) and tendencies (if AB(gT,gS)). + - need a "clever" read_pickup to restart from the other AB formulation +o move local commom bloc /GlobalLo/ (used for singleCpuIO) in EESUPPORT.h +o remove some unused variables (reduces number of compiler warnings) +o adjoint + * Disable useVariableViscosity for adjoint for time being + (there are a number of extensive recomputations) + * Initialize certain variables needed for adjoint + +checkpoint57w_post +o pkg/mdsio: use MAX_LEN_FNAM (instead of hard coded 80) for file-names + fix the singleCpuIO RS version of MDSWRITEFIELD + and add a WARNING if using globalFiles=T with multi-processors. +o write grid-file(s) in only one format (MDS or MNC): default=MNC (if + using MNC); can force MDS output by setting writegrid_mnc=F in data.mnc +o tracer advection scheme: + add DST-2 (=Lax-Wendroff) & 1rst order upwind schemes (the way to get + those 2 schemes before, changing GAD_FLUX_LIMITER.h + to recompile, + was not very convenient). + add implicit version for DST-3 & DST3_Flux_Limit vertical advection; + (further tests needed for the implicit DST & Flux-Limiter schemes). +o PTRACERS: added namelist parameter PTRACERS_ref in analogy to tRef + and sRef for convenience, handy, when you want to initialize + ptracers in a large domain with a constant non-zero value. Also, + untangle ptracers_init.F a little. + +checkpoint57v_post +o change dome exp. to use variable viscosity in side-drag terms. +o remove all the files from the cfc_offline test since they are now + incorporated into tutorial_cfc_offline which has been producing + identical results for a few days of testing +o add new parameter: sideDragFactor to enable half-slip-side BC + and change side-drag S/R to use viscosity from mom_calc_visc + (can switch back by setting sideDragFactor=0.); affects results at + truncation level; regenerate output for exp.: global_ocean.cs32x10(x3), + global_ocean_ebm, global_ocean_pressure, matrix_example & MLAdjust(x5). +o vorticity & strain are now computed without masking, to account for + no-slip-side BC in variable viscosity calculation ; mask is applied + anyway later on, before computing advection/coriolis terms. +o modify exp4 to test new obcs support for reading from external files + and for passive tracers +o fix behavior of ptracers_monitor when monitor output is written to a + netcdf-file; still not independent of monitor.F (writes in the same + file). +o change default value of tRef (put a uniform, meaningful value for ocean + & atmos) and initialize sRef (was missing, as Martin mentioned). +o Redefine viscC?Leith*. Change the coefficients of Leith viscosity + to be proportional to enstrophy dissipation length. Thus, + viscC?leith?_new=pi*(viscC?leith?_old)^(1/3) + This is now consistent with Smagorinsky and with the manual. + +checkpoint57u_post +o OBCS and PTRACERS: add open boundary support for passive tracers + - either use homogenous (pseudo) v.Neumann conditions or prescribe + OB-values from file; this is not different from the way theta and salinity + are treated + - however, Orlanski-radiation conditions are not supported, and the model + will stop if you use pTracers and Orlanski at the same time. + - beefed up the rountine obcs_external_fields_load: now only those open + boundary values are overwritten with values from files for which there + are really files, otherwise the OB-fields remain untouched. This makes + it possible to use different OBs at different ends of the domain (as + with EXF) +o reduce number of exch calls in shap_filt (s2). +o CS-grid: fix divergence contribution to Leith viscosity. Affects (@ + truncation level) 4/5 MLAdjust test results (11&12 digits match). + +checkpoint57t_post +o test biharmonic viscosity + no-slip with exp: global_ocean.cs32x15.viscA4 +o finish adding brackets (coriolis S/R, vecinv) in multi-terms sum to get + same truncation, independent of the face number: affects affects several + test. exp.: Update global_ocean.cs32x15 (+.thsice) & MLAdjust (all 5). +o fix bug in mom_v_sidedrag (biharmonic viscosity was counted 2 times); + note that biharmonic viscosity + no-slip was not tested in any experiment. +o fix bug in non-linear free-surf side-drag ; generate new output for + global_ocean.cs32x15(+.thsice) & global_ocean_pressure. +o make mnc honor the writeBinaryPrec flag for most kinds of output +o eesupp: split EEPARAMS into EESIZE/EEPARAMS and add a vector global sum +o minor change in averaging W (mom_vi_?_vertshear.F) that affects truncation + error; update output from global_ocean.cs32x15(+.thsice) & MLAdjust (all 5). +o add brackets in multi-terms sum to get same truncation, independent of + the face number (manage to get exactly same value of gU,gV at the cs-edge) + affects several test. exp. Update global_ocean.cs32x15 (+.thsice). +o Clean, new version of mom_calc_visc. Adds a new feature, viscAhRemax + and viscA4Remax, which allow one to limit the minimum viscosity by specifying + a maximum grid-scale Reynolds number. Also, changes all length calculations + in the case of grid anisotropy to geometric mean of dx**2 and dy**2. + Suggested values of viscosity parameters found in mom_calc_visc. + Many new viscosity diagnostics available. + +checkpoint57s_post +o Add clearing-house for viscosity calculations, mom_calc_visc and + correct numerous bugs in LeithD and Smagorinsky discretizations. + mom_calc_visc now allows for Smagorinsky, Leith and LeithD to be + used simultaneously, and to be used in mom_vecinv and mom_fluxform. + Mom_vecinv can be used with standard viscous calculation (mom_vi_hdissip.F) + and with Strain-Tension viscous term calculation (mom_hdissip.F). + The Strain-Tension form is now called with useStrainTensonVisc=.true. + ViscAhStrain and viscAhTension are now retired. +o diagnostics "VISCAHD" & "VISCA4D" replace "VISCAH" & "VISCA4". +o In response to JMC's bug report, genmake2 now ignores any soft-links + that it finds in the *current* directory when searching for files. + Soft-links found in any other source directories will still work as + they did before. +o add HAVE_SETRLSTK define and useSETRLSTK flag (eedata) which calls + a C routine to unlimit the stack size +o mnc-ify pkg/aim snapshot vars +o mnc-ify pkg/land as requested by Daniel +o various changes to mnc including: + - all files use the new "BASENAME[[.ITER].{t|f}NUM].nc" format + - output can now be grouped so that all files within a group + change the ITER portion of their names in lock-step together + - can now read ("global") PER-FACE (in addition to PER-TILE) files + and works with both EXCH1 and EXCH2 (but needs more testing) + - writing works for all verification test cases w/ g77 on Linux + +checkpoint57r_post +o make MNC variable initialization happen earlier +o add diagnostics for (almost) each term of the momentum Eq. +o remove SST,SSS,UVEL_k2,VVEL_k2 diagnostics. +o move pkg timeave out of pkg-groups "oceanic" & "atmospheric" (pkg/pkg_groups) +o remove MINIMAL_TAVE_OUTPUT option ; + add "dumpInitAndLast" to replace "nodumps" (and MINIMAL_TAVE_OUTPUT). +o move some basic S/R (used elsewhere in the code) from pkg/mdsio to eesupp/src + allows to compile without pkg/mdsio (& test successfully hs94.1x64x5) +o add MNC output for adjoint of EXF (adexf), SEAICE (adseaice) +o add time-dependent SST, SSS control +o cost terms in ecco/ modularized (new cost_generic.F) +o cost_averages routines are modularized (new cost_averagesgeneric.F) +o new infrastructure for seaice model vs. obs misfits in seaice/ + * driver from the_main_loop.F is seaice_cost_driver.F + * first term is AREA vs. SMR observation misfit (ALLOW_SEAICE_COST_SMR_AREA) + * gradient check in Exp. 6a of natl_box_adjoint/ +o natl_box_adjoint input_seaice for Lab. Sea now available online via wget + (see README file) + +checkpoint57q_post +o fix initialisation Pb in calc_gw (get NANs in exp5 with g77) +o fix annoying months-old bug in mnc/mdsio output for seaice pkg + - bug was reported by Jean-Michel and Ian Fenty +o fix initialization Pb in AIM-Ocean coupled model (aim_sice2aim.F) + update exp. cpl_aim+ocn output. +o Implement 4-level checkpointing: AUTODIFF_4_LEVEL_CHECKPOINT + Needed for high-res. runs with large global files + to be able to limit tapelev size +o Changed some tests for adjoint: + * carbon/ now tests AUTODIFF_2_LEVEL_CHECKPOINT + * natl_box_adjoint/code_bulk/ tests AUTODIFF_4_LEVEL_CHECKPOINT + * global_ocean.90x40x15/ back to default 3-level checkpointing +o Modifications to enable scripted COMMON to MODULE conversion + * verification/OpenAD/code/ has necessary scripts and description; + * converts, compiles and runs successfully; + +checkpoint57p_post +o reading of delXfile & delYfile moved from ini_parms.F to ini_grid.F +o move ${PKG}_MNC_INIT from ${PKG}_READ_PARAMS to ${PKG}_INIT_FIXED + (already the case for some pkgs, including recent MNC_init, e.g. thsice) +o call CALC_GW from DYNAMICS (instead of from FORWARD_STEP) o Dissipation & phiHyd gradient are always added to gU,gV in timestep.F (was already the case for dissipation with mom_vecinv, and also the case for grad.PhiHyd when staggered-timeStep) @@ -12,9 +529,6 @@ (cg2d matching number) and leave the others for later: front_relax(10), global_ocean_pressure(10),ideal_2D_oce(10),internal_wave(9),lab_sea(12), matrix_example(7!),natl_box(12),plume_on_slope(11),vermix(12x3,11x2). -o move ${PKG}_MNC_INIT from ${PKG}_READ_PARAMS to ${PKG}_INIT_FIXED - (already the case for some pkgs, including recent MNC_init, e.g. thsice) -o call CALC_GW from DYNAMICS (instead of from FORWARD_STEP) checkpoint57o_post o fix MNC/MDSIO flags in PTRACERS so that (1) it works, and