--- MITgcm/doc/tag-index 2005/04/06 17:36:42 1.470 +++ MITgcm/doc/tag-index 2006/03/02 22:52:09 1.618 @@ -1,8 +1,464 @@ -$Header: /home/ubuntu/mnt/e9_copy/MITgcm/doc/tag-index,v 1.470 2005/04/06 17:36:42 jmc Exp $ +$Header: /home/ubuntu/mnt/e9_copy/MITgcm/doc/tag-index,v 1.618 2006/03/02 22:52:09 jmc Exp $ +$Name: $ Notes on tags used in MITgcmUV ============================== +o Apply mask on Fresh-Water flux (needed for SSH forcing). + update output.txt of exp. global_ocean_ebm & cpl_aim+ocn (affects cg2d residual) +o seaice: add runtime flags for turning angles (default to zero) +o Adding runtime parameter to exf/, ctrl/, to remove on-the-fly global mean + and trend from exf forcing and ctrl control adjustments +o fix variable aliasing in gad_calc_rhs that cannot be handled by TAF + (since checkpoint57x_post) +o change the default rotation period to 86164.s = the Earth rotation +o 1rst implementation of Implicit IGW using the 3-D solver (use3Dsolver=T) + and based on a reference stratification. Tested within hs94.cs-32x32x5. +o seaice advection: add code for choosing between the default (2nd order + central differences) and multiDim advection schemes provided by + pkg/generic_advdiff +o seaice: + - removed all references to SEAICE_GRID.h fields from + dynsolver, advect, diffus, lsr, without changing the results of lab_sea + (cubed-sphere configuration will change a little) + - grid computations in seaice_init are obsolete now. + - cleaned up code a little so that is easier to read (hopefully). + - added new (better?) discretizations of default advection and diffusion + (turn on with SEAICEuseFluxForm) + - replace 1 in 3d global fields by kSurface in growth.F + +checkpoint58a_post +o seaice: + - bug fix in advect.F +o shelfice: + - separate shelfice load anomaly from pload (breaks with time + dependent forcing), => introduce constant field shelficeLoadAnomaly. + Its default is 0., but it may be computed more cleverly from (unknown) + t- and s-profiles (tRef, sRef) and actual EOS. For now this has to be + done offline. A good approximation of the pressure load anomaly is + necessary to avoid large initial adjustment processes underneath + deep-reaching shelfice. + - small fix in ISOMIP shelfice_thermodynamics + - add more sophisticated thermodynamics of Hellmer (1989), this is + now the default + - give a few constants more intuitive names +o add code to balance EmPmP and Qnet at the end of do_ocean_physics. Useful + if bulk formulae are used in long integration (especially EmPmR). Turn + on with balanceEmPmR = .true. or balanceQnet = .true. in data, PARM01 + if balancePrintMean, the imbalance that is substracted is printed to + STDOUT. +o fix bug (typo) in obcs_apply_eta.F +o add a new package shelfice which enables us to model the circulation + underneath shelf-ice with draughts of hundreds of meters. + - works + - to do: + include improved thermodynamics + + check whether kSurfC (from model/inc/SURFACE.h) can be used + instead of new field kTopC + + can we use topoFile, Ro_surf and existing code in ini_depth.F + instead of new field R_shelfIce and new code in ini_depth.F + and ini_mask_etc.F? + + adjust vertical mixing schemes? +o seaice pkg: + - add a cpp-flag to include a simple formula for a salinity dependent + freezing point of sea water at the surface + - change the contents of SEAICE_TEST_ICE_STRESS_1 so that zonal and + meridional stresses are now different (and hopefully correct) +o AIM pkg: change threshold on large-scale condensation to conserve Heat. + update results of aim.5l_LatLon test ; fix title & units of AIM diagnostics + and change 3 diagnostics names (OSR,OSRCLR,KM -> TSR,TSRCLR,DRAG) +o pkg/diagnostics: add options and parameters for regional-statistics + diagnostics ; define regions by reading a region-mask from a file + (might add other options later) +o pkg/bulk_force: + - add option and parameters to use AIM surface-flux formulae. + - Change loading part: S/R BULKF_FIELDS_LOAD only take care of bulkf_fields ; + others forcing fields (defined in PARM05, parameter file "data") are loaded + from S/R EXTERNAL_FIELDS_LOAD, as usually (with useBulkforce = T or F). + - initialise all bulkf_fields in bulkf_init.F ; do in-lining of exf_bulkcdn.F + - use the right EXCH call for uwind,vwind (to work on CS-grid). + - re-arrange header files (move parameters from BULKF.h to BULKF_PARAMS.h) + and parameters (note: calcWindStress replaces .NOT.readwindstress). + - cleaner interface with pkg/thSIce (new S/R THSICE_GET_PRECIP). + +checkpoint58 +o add "--embed-source" option to genmake2 which, when the supporting + tools can be compiled (as determined by genmake2) will turn on the + embed_files package which then embeds the entire MITgcm source code + (*.[fFhc] + Makefile) used for the build within the executable + - requested by CNH but off by default + - adds a paltry <9MB to the mitgcmuv executable in most cases + - only writes the output when useEMBEDSRC in eedata is true +o clean up 3-dim. relaxation codes: + * Fix I/O inconsistency in pkg/rbcs: replace precFloat32 by readBinaryPrec + * Remove 3-dim. relaxation code from pkg/exf (now use only pkg/rbcs) + * Thanks to Tom Haine for testing! + +checkpoint57z_post +o make CG3D solver compatible with Free-surface at k > 1 (p-coordinate): + affects output (@ truncation level) of exp. plume_on_slope ; updated. +o fix the pickup behavior for obcs in combination with ptracers +o fix a bug in ptracers_external_fields_load +o no AB-2 at the first iteration for Gw (consistent with Gu,Gv,Gt,Gs ...) + affects results of NH experiments (but all our NH tests have Gw[it=1]==0 !!) +o transfered surface NH pressure to eta field (if exactConserv). +o gmredi: fix bugs in slope tapering ldd97 (depthZ had the wrong sign) + and update lab_sea output.txt file. +o completing 3-dim. relaxation code: additional term + 1/tau*( theta(i,j,k) - thetaStar(i,j,k) ) + in S/R EXTERNAL_FORCING_T (file external_forcing.F) + * At compile time, in "EXF_OPTIONS.h" set + #define ALLOW_CLIMTEMP_RELAXATION + #define ALLOW_CLIMSALT_RELAXATION + * At runtime in "data", under &PARM03 set (e.g., units in seconds) + tauThetaClimRelax3Dim = 15552000.0, + tauSaltClimRelax3Dim = 15552000.0, + * 3 cases: + 1) Use a constant-in-time 3-dim. field + 2) Provide 12 3-dim. fields corresponding to Jan., ... , Dec. + 3) Real-time relax. to time-evolving prescribed field +o Adding Laplacian-type smoothness constraint on + initial and boundary (forcing) controls (ic, bc) + * enable at compile-time via + ALLOW_SMOOTH_IC_COST_CONTRIBUTION, ALLOW_SMOOTH_BC_COST_CONTRIBUTION + * enable at run-time via mult_smooth_ic = 1, mult_smooth_bc = 1 + * Absolute scale somewhat unclear so far + * no area weighting was included since no other cost term does so far + +checkpoint57y_post +First step for a NLFS adjoint +o initially suppress rStar (new flag DISABLE_RSTAR_CODE) +o new init. routines for calc_r_star, calc_surf_dr +o still need to deal with ini_masks_etc +o testreport seemed happy +checkpoint57y_pre + +o obcs: always reset wVel & eta (to zero or prescribe it) at the OBs. +o add new package rbcs (for relaxing ptracers at boundaries/depth/surface etc) +o add new offset feature to offline pkg (plus minor cleanup) +o cfc fixes for final year of integration +o clean up GCHEM_OPTIONS.h/DIC_OPTIONS.h (all options should + be in GCHEM_OPTIONS). + +checkpoint57x_post +o fix testreport Pb in multiple test experiment. +o cleanup our namelist syntax in verification: + - make it more F95 standards compliant (some work still needed) + - allows the vast majority of our tests to work with gfortran +o Non-Hydrostatic: + - put all NH variables (formerly in DYNVARS.h & GW.h) in NH_VARS.h + - fix exchange calls for CS-grid using the new EXCH_S3D_RL. +o Allow to apply AB on T,S rather than on AB(gT,gS): + - implemented within #ifdef ALLOW_ADAMSBASHFORTH_3 + - use the same arrays (gtNm,gsNm) to hold tracer field at previous + time-steps (if AB(T,S)) and tendencies (if AB(gT,gS)). + - need a "clever" read_pickup to restart from the other AB formulation +o move local commom bloc /GlobalLo/ (used for singleCpuIO) in EESUPPORT.h +o remove some unused variables (reduces number of compiler warnings) +o adjoint + * Disable useVariableViscosity for adjoint for time being + (there are a number of extensive recomputations) + * Initialize certain variables needed for adjoint + +checkpoint57w_post +o pkg/mdsio: use MAX_LEN_FNAM (instead of hard coded 80) for file-names + fix the singleCpuIO RS version of MDSWRITEFIELD + and add a WARNING if using globalFiles=T with multi-processors. +o write grid-file(s) in only one format (MDS or MNC): default=MNC (if + using MNC); can force MDS output by setting writegrid_mnc=F in data.mnc +o tracer advection scheme: + add DST-2 (=Lax-Wendroff) & 1rst order upwind schemes (the way to get + those 2 schemes before, changing GAD_FLUX_LIMITER.h + to recompile, + was not very convenient). + add implicit version for DST-3 & DST3_Flux_Limit vertical advection; + (further tests needed for the implicit DST & Flux-Limiter schemes). +o PTRACERS: added namelist parameter PTRACERS_ref in analogy to tRef + and sRef for convenience, handy, when you want to initialize + ptracers in a large domain with a constant non-zero value. Also, + untangle ptracers_init.F a little. + +checkpoint57v_post +o change dome exp. to use variable viscosity in side-drag terms. +o remove all the files from the cfc_offline test since they are now + incorporated into tutorial_cfc_offline which has been producing + identical results for a few days of testing +o add new parameter: sideDragFactor to enable half-slip-side BC + and change side-drag S/R to use viscosity from mom_calc_visc + (can switch back by setting sideDragFactor=0.); affects results at + truncation level; regenerate output for exp.: global_ocean.cs32x10(x3), + global_ocean_ebm, global_ocean_pressure, matrix_example & MLAdjust(x5). +o vorticity & strain are now computed without masking, to account for + no-slip-side BC in variable viscosity calculation ; mask is applied + anyway later on, before computing advection/coriolis terms. +o modify exp4 to test new obcs support for reading from external files + and for passive tracers +o fix behavior of ptracers_monitor when monitor output is written to a + netcdf-file; still not independent of monitor.F (writes in the same + file). +o change default value of tRef (put a uniform, meaningful value for ocean + & atmos) and initialize sRef (was missing, as Martin mentioned). +o Redefine viscC?Leith*. Change the coefficients of Leith viscosity + to be proportional to enstrophy dissipation length. Thus, + viscC?leith?_new=pi*(viscC?leith?_old)^(1/3) + This is now consistent with Smagorinsky and with the manual. + +checkpoint57u_post +o OBCS and PTRACERS: add open boundary support for passive tracers + - either use homogenous (pseudo) v.Neumann conditions or prescribe + OB-values from file; this is not different from the way theta and salinity + are treated + - however, Orlanski-radiation conditions are not supported, and the model + will stop if you use pTracers and Orlanski at the same time. + - beefed up the rountine obcs_external_fields_load: now only those open + boundary values are overwritten with values from files for which there + are really files, otherwise the OB-fields remain untouched. This makes + it possible to use different OBs at different ends of the domain (as + with EXF) +o reduce number of exch calls in shap_filt (s2). +o CS-grid: fix divergence contribution to Leith viscosity. Affects (@ + truncation level) 4/5 MLAdjust test results (11&12 digits match). + +checkpoint57t_post +o test biharmonic viscosity + no-slip with exp: global_ocean.cs32x15.viscA4 +o finish adding brackets (coriolis S/R, vecinv) in multi-terms sum to get + same truncation, independent of the face number: affects affects several + test. exp.: Update global_ocean.cs32x15 (+.thsice) & MLAdjust (all 5). +o fix bug in mom_v_sidedrag (biharmonic viscosity was counted 2 times); + note that biharmonic viscosity + no-slip was not tested in any experiment. +o fix bug in non-linear free-surf side-drag ; generate new output for + global_ocean.cs32x15(+.thsice) & global_ocean_pressure. +o make mnc honor the writeBinaryPrec flag for most kinds of output +o eesupp: split EEPARAMS into EESIZE/EEPARAMS and add a vector global sum +o minor change in averaging W (mom_vi_?_vertshear.F) that affects truncation + error; update output from global_ocean.cs32x15(+.thsice) & MLAdjust (all 5). +o add brackets in multi-terms sum to get same truncation, independent of + the face number (manage to get exactly same value of gU,gV at the cs-edge) + affects several test. exp. Update global_ocean.cs32x15 (+.thsice). +o Clean, new version of mom_calc_visc. Adds a new feature, viscAhRemax + and viscA4Remax, which allow one to limit the minimum viscosity by specifying + a maximum grid-scale Reynolds number. Also, changes all length calculations + in the case of grid anisotropy to geometric mean of dx**2 and dy**2. + Suggested values of viscosity parameters found in mom_calc_visc. + Many new viscosity diagnostics available. + +checkpoint57s_post +o Add clearing-house for viscosity calculations, mom_calc_visc and + correct numerous bugs in LeithD and Smagorinsky discretizations. + mom_calc_visc now allows for Smagorinsky, Leith and LeithD to be + used simultaneously, and to be used in mom_vecinv and mom_fluxform. + Mom_vecinv can be used with standard viscous calculation (mom_vi_hdissip.F) + and with Strain-Tension viscous term calculation (mom_hdissip.F). + The Strain-Tension form is now called with useStrainTensonVisc=.true. + ViscAhStrain and viscAhTension are now retired. +o diagnostics "VISCAHD" & "VISCA4D" replace "VISCAH" & "VISCA4". +o In response to JMC's bug report, genmake2 now ignores any soft-links + that it finds in the *current* directory when searching for files. + Soft-links found in any other source directories will still work as + they did before. +o add HAVE_SETRLSTK define and useSETRLSTK flag (eedata) which calls + a C routine to unlimit the stack size +o mnc-ify pkg/aim snapshot vars +o mnc-ify pkg/land as requested by Daniel +o various changes to mnc including: + - all files use the new "BASENAME[[.ITER].{t|f}NUM].nc" format + - output can now be grouped so that all files within a group + change the ITER portion of their names in lock-step together + - can now read ("global") PER-FACE (in addition to PER-TILE) files + and works with both EXCH1 and EXCH2 (but needs more testing) + - writing works for all verification test cases w/ g77 on Linux + +checkpoint57r_post +o make MNC variable initialization happen earlier +o add diagnostics for (almost) each term of the momentum Eq. +o remove SST,SSS,UVEL_k2,VVEL_k2 diagnostics. +o move pkg timeave out of pkg-groups "oceanic" & "atmospheric" (pkg/pkg_groups) +o remove MINIMAL_TAVE_OUTPUT option ; + add "dumpInitAndLast" to replace "nodumps" (and MINIMAL_TAVE_OUTPUT). +o move some basic S/R (used elsewhere in the code) from pkg/mdsio to eesupp/src + allows to compile without pkg/mdsio (& test successfully hs94.1x64x5) +o add MNC output for adjoint of EXF (adexf), SEAICE (adseaice) +o add time-dependent SST, SSS control +o cost terms in ecco/ modularized (new cost_generic.F) +o cost_averages routines are modularized (new cost_averagesgeneric.F) +o new infrastructure for seaice model vs. obs misfits in seaice/ + * driver from the_main_loop.F is seaice_cost_driver.F + * first term is AREA vs. SMR observation misfit (ALLOW_SEAICE_COST_SMR_AREA) + * gradient check in Exp. 6a of natl_box_adjoint/ +o natl_box_adjoint input_seaice for Lab. Sea now available online via wget + (see README file) + +checkpoint57q_post +o fix initialisation Pb in calc_gw (get NANs in exp5 with g77) +o fix annoying months-old bug in mnc/mdsio output for seaice pkg + - bug was reported by Jean-Michel and Ian Fenty +o fix initialization Pb in AIM-Ocean coupled model (aim_sice2aim.F) + update exp. cpl_aim+ocn output. +o Implement 4-level checkpointing: AUTODIFF_4_LEVEL_CHECKPOINT + Needed for high-res. runs with large global files + to be able to limit tapelev size +o Changed some tests for adjoint: + * carbon/ now tests AUTODIFF_2_LEVEL_CHECKPOINT + * natl_box_adjoint/code_bulk/ tests AUTODIFF_4_LEVEL_CHECKPOINT + * global_ocean.90x40x15/ back to default 3-level checkpointing +o Modifications to enable scripted COMMON to MODULE conversion + * verification/OpenAD/code/ has necessary scripts and description; + * converts, compiles and runs successfully; + +checkpoint57p_post +o reading of delXfile & delYfile moved from ini_parms.F to ini_grid.F +o move ${PKG}_MNC_INIT from ${PKG}_READ_PARAMS to ${PKG}_INIT_FIXED + (already the case for some pkgs, including recent MNC_init, e.g. thsice) +o call CALC_GW from DYNAMICS (instead of from FORWARD_STEP) +o Dissipation & phiHyd gradient are always added to gU,gV in timestep.F + (was already the case for dissipation with mom_vecinv, + and also the case for grad.PhiHyd when staggered-timeStep) + This will allow to put dissipation out-off the AB time-stepping. + Unfortunately, affects truncation error. Update output of exp. that "fails" + (cg2d matching number) and leave the others for later: front_relax(10), + global_ocean_pressure(10),ideal_2D_oce(10),internal_wave(9),lab_sea(12), + matrix_example(7!),natl_box(12),plume_on_slope(11),vermix(12x3,11x2). + +checkpoint57o_post +o fix MNC/MDSIO flags in PTRACERS so that (1) it works, and + (2) its ready to be documented during the 20050801 DocFest +o MNC-ify the gmredi package -- tested and works w/ and w/o mnc + for ideal_2D_oce and lab_sea on linux_ia32_g77 +o set to #undef CTRL_SET_OLD_MAXCVARS_30 + in global1x1_tot/code_seaice_adj to access indices 32, 33 + (worth another tag) + +checkpoint57n_post +o adding precip control xx_precip 32 +o adding swflux control xx_swflux 33 +o Replacing 10 forcing penalty cost routines by 1 generic. +o Implementing partitioning in time-mean and variable adjustment + for atmos. state. +o Time-mean constant error is now read in data.ecco (instead of hard-coded) +o in natl_box_adjoint: + * updated exp 1 to 10 + (but does not have time-mean vs. variable split results yet) +o updated global1x1/*_seaice_adj/ + to incorporate latest changes +o enable useSingleCpuIO for mdsio vector routines + (applies in particular to tapelev I/O) +o removed inefficient K-loop in all active_file*control*.F + +checkpoint57m_post +o re-arrange exp. adjustment.cs-32x32x1 (adjust_nlfs.cs-32x32x1 merge into) + and advect_cs (use EXCH-2 and standard cs-32 grid files). +o pkg/exch2: filling of face-corner halo regions is optional + (ifdef W2_FILL_NULL_REGIONS) and is turned off by default. + +checkpoint57l_post + tag before updating tutorials (pre-release-2) +o add cos & sin of grid-direction orientation angle (curvilinear grid only, + for output and interpolation of input fields onto model grid) +o fix radius in mom_v_metric_cylinder.F (wrong by dy/2). + Affects results of exp. rotating_tank ; update output.txt. +o pkg/diagnostics: 2 new S/R to fill a diagnostics using a scaling factor + and taking the square quantity and/or using a fraction-weight field. +o fix aim_diagnostics_init.F mate numbers. +o add mnc output capability to diagnostics/diagstat and update + our cvsignore files for the ACSII output generated + +checkpoint57k_post +o lab_sea now uses diagnostics package and provides a suite of + new EXF diagnostics output. + +checkpoint57j_post +o exf + * bug fix in exf_bulkformulae for psimh (spotted by Eliyahu Biton): + Bracket missing in eqn. for psimh (eqn. 7 of Large & Pond, 1982); + terms -2*ATAN(x) + pi/2 were added to both stable and unstable case. + * extended diagnostics output + - now includes all EXF variables + - hs, hl moved to common block + - separate S/R for diagnostics, called after ctrl vector is added + - name changed for EXFsw -> EXFswnet, EXFlw -> EXFlwnet + - EXFqnet contains true Qnet (i.e. includes qsw) + * updated verif. lab_sea, global_with_exf + * Rearranging hflux (exf_mapfields -> exf_getforcing) + to ensure that diagnostics sees a true EXFqnet +o add matlab scripts for CS-grid vectors (in utils/cs_grid) +o diagnostics pkg: change pointers so that 1 diagnostic can be used + several times with different frequencies. +o mnc-ify the thsice package as requested by Daniel Enderton + - the monitor--MNC output needs work + - many attributes need to be added (most are currently blank) +o mnc-ify theaim_v23 package as requested by Daniel Enderton + - many attributes need to be added (most are currently blank) +o remove "groundAtK1" & "rkFac" (replaced by usingPCoords & -rkSign) +o add Sadourny like discretization to the 4th.O vorticity advection scheme +o fix bug in rStar code (calc_r_star.F) when used with topo/bathy. + update output.txt from: aim.5l_cs (& .thSI), cpl_aim+ocn, + fizhi-gridalt-hs and global_ocean.cs32x15 (& .thsice). +o fix few little things to avoid floating error with -ftrapuv (ifort v9) + (ini_spherical_polar_grid.F, calc_r_star.F, monitor/mon_surfcor.F) + +checkpoint57i_post +o Diagnostics package was changed: diagnostic allocation is now deactivated + by setting an empty file name in the namelist (used to be by setting 0 frequency) +o momentum advection (VI form) options: activate 4th.O vorticity Coriolis ; + add 1rst Order upwind vertical Shear. +o add a quick fix for A/B checkpointing in OFFLINE mode +o add IGNORE_TIME define and -ignore_time option to genmake2 as an + end-run around the C/Fortran linking horror in eesup/src/timers.F +o added pkg/runclock: allows user to terminate run based on wall clock +o added non-hydrostatic scaling parameter: nh_am2 +o pkg/my82: futile attempt to make results compiler-independent by adding + some "_d 0", etc. no effect. +o for mnc output, fill the 'T' coordinate var with myTime and create a + separate 'iter' variable for iteration count +o pkg/diagnostics: + add new capability: output of Global/Regional & per-level statistics ; + tested against monitor output (including land & thSIce) on various exp. +o make seaice-pkg I/O type flags (MNC/MDS) more standard. + +checkpoint57h_done + tag after changing user customized files (DIAGNOSTICS_SIZE.h, + data.diagnostics, data.gchem, data.ptracers) is done. + +o pkg/diagnostics: prepare for Global/Regional statistics. + add 2nd namelist in data.diagnostics and update DIAGNOSTICS_SIZE.h +o remove "baseTime" (no used) from arg. list of DIFF_BASE_MULTIPLE + and rename it: DIFFERENT_MULTIPLE + +checkpoint57h_post +o move tIter0 from data.gchem to PTRACERS_Iter0 in data.ptracers +o pkg/diagnostics: change output frequency, now in seconds (instead + of Nb of iterations). This requires to change data.diagnostics. +checkpoint57h_pre + +o in mnc, let the user create the output dir if both mnc_outdir_date + and mnc_outdir_num are false +o add fflags() to pkg/diagnostics which allows one to specify, on a + per-file basis, the file precision [default behavior is unchanged] +o added diagnostics to pkg/kpp, including computation of mixed layer + depth based on a temperature/density criterion +o updated verification/natl_box to test the new pkg/kpp diagnostics +o bugs fixed (with useAbsVorticity=T & with useJamartMomAdv=T) +o test AB-3 code with 4th.Order advection scheme (advect_xy/input.ab3_c4) +o fix mnc flags in pkg/seaice so that they are "owned" by seaice, + not mnc -- this mistake was found by JMC and is now corrected + +checkpoint57g_post +o add Adams-Bashforth 3rd Order time stepping: + - default remains AB-2 (#undef ALLOW_ADAMSBASHFORTH_3) + - not yet implemented with NH, CD_Scheme, pTracers, MNC_pickup ... +checkpoint57g_pre + +o make lambda[Theta,Salt]ClimRelax spatially varying + (default remains spatially uniform constant based on tau) +o added new control variables + * init. uVel, vVel, etanN + * lambda[Theta,Salt]ClimRelax +o separate masks used for ctrl_pack/unpack 'from write_grid' output + (suggested by G. Forget) + +checkpoint57f_post +o add parameter "baseTime" = model base time = time at iteration zero + new function DIFF_BASE_MULTIPLE (replace DIFFERENT_MULTIPLE) to + account for baseTime shift +o move Coriolis arrays from PARAMS.h to GRID.h checkpoint57f_pre o mnc-ifying the seaice package @@ -26,7 +482,7 @@ checkpoint57e_post o Adding eddy stress controls a la Ferreira et al. -checkpoint57e_pre +checkpoint57e_pre (actually was tagged: eckpoint57e_pre) o fizhi pkg: fix AtoC and CtoA when called with same input & output array update output.txt of exp. fizhi-gridalt-hs