/[MITgcm]/MITgcm/doc/tag-index
ViewVC logotype

Diff of /MITgcm/doc/tag-index

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph | View Patch Patch

revision 1.942 by dimitri, Fri Jan 18 01:38:33 2008 UTC revision 1.1061 by jmc, Thu Feb 5 01:39:48 2009 UTC
# Line 4  $Name$ Line 4  $Name$
4      Notes on tags used in MITgcmUV      Notes on tags used in MITgcmUV
5      ==============================      ==============================
6    
7    o pkg/mdsio & rw:
8     - add argument & option to S/R MDS_WRITEVEC_LOC (avoid Open/Close & write-meta)
9     - add simple interface S/R to MDS_WRITEVEC_LOC in pkg/rw: WRITE_GLVEC_RX.
10    o pkg/flt:
11     - replace FLT_INIT by 3-steps standard initialization S/R: readparms,
12       init_fixed & ini_varia.
13     - clean-up & simplify linear interpolation S/R:
14       move flt_bilinear.F -> flt_interp_linear.F ; add arg. myThid.
15     - fix some indices (mainly vertical index) ; add IMPLICIT NONE.
16     - more efficient I/O, using new options of MDS_WRITEVEC_LOC S/R.
17     - add vert. coordinate & horiz. indices to output files.
18     - change vertical position in initial condition, from index to depth [m].
19    o pkg/ggl90: a few modifications:
20     - fix bottom boundary condition, and interpolation of KappaE
21       near top and bottom
22     - use same set of viscosity/diffusivity for TKE/momnetum/tracer
23     - add smoothing option as in Blanke and Delecluse (1993) (--> ALLOW_GGL90_SMOOTH)
24     - add a few options for mixing-length upper limit (--> mxlMaxFlag)  
25    o rename thetaMin,phiMin -> xgOrigin,ygOrigin
26      (maintain temporary backward compatibility, until next checkpoint)
27    
28    checkpoint61h
29    o pkg/diagnostics with "periodic averaging diagnostics":
30      fix S/R DIAGNOSTICS_COUNT ; hack diagnostics_out.F to get NetCDF output.
31    o pkg/my82: add missing "_d 0" ; update output of exp. vermix.my82
32    o pkg/obcs: fix loop ranges for balancing code
33    o pkg/flt:
34     - improve criteria for finding which tile owns a float.
35     - fix FLT_EXCH for case without MPI ; apply cyclic BC + fix also the MPI case.
36    o Add well-mixed CO2 box in aim_v23 (which includes changes in pkg
37      aim_compon_interf, ocn_compon_interf, gchem, and dic to get coupling
38      with ocean biogeo)
39    o pkg/flt:
40     - do some cleaning and fix the restart ;
41     - add output.txt in flt_example/results to get this pkg tested.
42    o genmake2: add an EXTENDED_SRC option and flag.
43       for now, cannot be turned on on command line (only through genmake_local)
44    o pkg/mdsio: read/write vector:
45     - singleCpuIO: fix RL/RS in MDSWRITEVECTOR by calling new S/R MDS_BUFFERtoRL/RS
46     - singleCpuIO=F: fix arrType & filePrec & _BYTESWAPIO in both MDSREADVECTOR
47       & MDSWRITEVECTOR by calling new S/R MDS_RD/WR_VEC_RL/RS.
48     - affects gradient of test-exp "bottom_ctrl_5x5" (not due to _BYTESWAPIO)
49      (drop to 4 digits matching for grad). But this test does not look very
50      reliable (was already failling on eddy, fc5, at 6.digits). Update output.
51    
52    checkpoint61g
53    o pkg/flt:
54      - move FLT_CPPOPTIONS.h to FLT_OPTIONS.h (standard name)
55       + make OPTIONS file more standard.
56      - rename S/R MDSREADVECTOR_FLT to FLT_MDSREADVECTOR (to mach src file name)
57      - fix _BYTESWAPIO CPP-Flag
58      - standard reading of file-parameter "data.flt"
59      - fix argument list of S/R FLT_RESTART
60      still need to fix _BYTESWAPIO in pkg/mdsio/mdsio_writevector.F
61    o pkg/obcs: fix a CPP-flag, bug reported by Jeff Blundell
62    o gather_2d.F/scatter_2d.F: suppress vectorisation on NEC SX in respond to
63      a still unfixed compiler/optimization bug
64    
65    checkpoint61f
66    o pkg/seaice, LSR solver: fix bug in GLOBAL_MAX calls ;
67      update results of global_ocean.cs32x15.icedyn test.
68    o move getcon.F from model/src to pkg/fizhi.
69    o pkg/exf: add parameter for extrapolation of temp up to the surface
70       and option to prevent negative evap (in bulk_largeyeager04 only).
71    o Prather Advection scheme: fix tracer conservation for divergent flow
72      (e.g., when using NonLin Free-Surface).
73    o kpp: retire KPPmld diagnostics --> use MXLDEPTH instead
74    o gmredi (Visbeck-variable-K):
75     - add more parameters to Visbeck-variable-K.
76     - use a 5 points average for dSigmaR in Visbeck-K calculation
77       (more "homogenous": same stencil and same weights as in dSigmaH)
78     - update output of ideal_2D_oce experiment.
79    o fix CPP-flag REAL4_IS_SLOW, when _RS expands into real*4
80      (#undef REAL4_IS_SLOW)
81     - pkg/mnc/mnc_cw_cvars.F: write _RS-grid variable as netcdf-real*4
82       coordinate variable
83     - pkg/monitor/monitor.F: call mon_printstats_rs for _RS variables
84       (surface forcing fields), removes some of the functionality
85     - model/src/write_grid.F: write _RS variables as RS-netcdf variables
86     - model/src/diags_oceanic_surf_flux.F: fix a few diagnostics, but
87       probably not all: copy _RS surface flux fields to RL field before
88       calling DIAGNOSTICS_FILL
89     - model/inc/CPP_EEMACROS.h: make the _EXCH_*_RS macros expand into
90       real*4 (CALL EXCH_*_RS) versions.
91     - tested in 2 experiments: inverted_barometer & solid-body.cs-32x32x1
92       (generate new output).
93    
94    checkpoint61e
95    o gmredi (Visbeck-variable-K):
96      - fix the "OLD_VISBECK_CALC" option + move the #undef to GMREDI_OPTIONS.h
97      - change computation of Visbeck-K where Slope > Smax :        
98        now: N*min(Slope,Smax) (similar to OLD_VISBECK_CALC with gkw91 taperFct)
99        previously was: M*sqrt(min(Slope,Smax)) ; update ideal_2D_oce output.
100    o bottom-drag in P-coord.: change units of bottomDragLinear & bottomDragQuadratic
101      to be the same as with Z-coord. (i.e., m/s & no-units respectively).
102    o calc_viscosity: fix index range (was wrong for CD-Scheme & explicit Visc)
103    o pkg gmredi, linear & fm07 tapering: put an upper limit on Slope^2 so that Kwz
104      does not become too large (to avoid precision problems in implicit-diffusion
105      solver); update ideal_2D_oce output.
106    o pkg ggl90:
107      - in ggl90_cal.F: compute only one set of visc/diff, used to
108        step forward TKE/T/S/momentum
109      - default value of GGL90viscMax/GGL90diffMax larger and equal (to
110        have Prandlt =1)
111    o gmredi (fm07):
112      - add lower limit on Transition layer thickness + lower limit on 1/lambda
113      - allow to set few more params from data.gmredi
114    o pkg ggl90:
115          - add missing sqrt(2) factor in computation of mixing length
116            scale in ggl90_calc.F
117            (see Eq. (2.35) in Blanke and Delecluse, JPO, 1993)
118    
119    checkpoint61d
120    o adjoint modifs
121      - adapt to new field rhoInSitu
122      - allow to revert from StoreDynVars2D, StoreDynVars3D
123        to individual fields
124        (switches AUTODIFF_USE_OLDSTORE_2D, AUTODIFF_USE_OLDSTORE_3D)
125    o store 3-D (in-situ) density in commom block (DYNVARS.h)
126     - save 1 rho computation.
127     - no longer modify T & S inland when using down_slope pkg.
128    o gad_som : allow to switch to SOM advection for T & S without corresponding
129      pickup files (using new S/R: MDS_CHECK4FILE).
130    o keep removing _BEGIN/_END_MASTER between MDSIO S/R call
131      (for useSingleCpuIO to work in multi-threaded)
132    o pkg/shelfice:
133     - disentangle parameters: retire shelfIceFile in data/PARM05 and substitute
134       with SHELFICEtopoFile in data.shelfice
135     - move code for reading ice shelf topography and modifying hFacC into separate
136       subroutines of the shelfice package
137     - separate initialisation of "fixed" and "variable" variables
138     - kTopC is not (yet) replaced by kSurfC, although this is possible
139    o fix broken diagnostic SIatmFW and changed the units from m/s to kg/m^2/s
140    o add initialisation of deepFac if using Pcoords (new S/R set_grid_factors)
141      and rename:
142      ini_phiref.F          --> set_ref_state.F  (+ set anelastic factors)
143      ini_reference_state.F --> load_ref_files.F (- set anelastic factors)
144    o change FIND_RHO_SCALAR : return rho (instead of rho - rhoConst)
145    
146    checkpoint61c
147    o add option ALLOW_ADDFLUID and run-time selector "selectAddFluid"
148      to add mass source/sink of fluid in the interior (3-D generalisation
149      of oceanic real-fresh water flux).
150    o pkg/monitor: fix recip_dr argument in mon_advcflw2 call (-> advcfl_W_hf_max)
151    o vermix test experiment: switch from LINEAR EOS to MDJWF (not tested before)
152    o new pkg: down_slope
153      density-driven downsloping flow parameterisation (Tellus, 1999, 412-430).
154      - presently, modify T & S inland (dwnslp_calc_rho.F).
155        can be avoided if rho was stored in common bloc and used in calc_phi_hyd.
156      - implementation for ocean in P-coords not tested.
157      - add secondary test to global_ocean.90x40x15 (input.dwnslp) to check this pkg.
158    o move kSurfC,kSurfW & kSurfS from SURFACE.h to GRID.h (next to kLowC)
159      (to facilitate conversion of oceanic pkg to p-coordinate).
160    o change FIND_RHO to FIND_RHO_2D :
161      pass arguments tFld & sFld as local (tile) 2D-arrays ; +fix EOS_CHECK.
162    o new pkg: cheapaml
163    
164    checkpoint61b
165    o exch2:
166      change index bounds in rx2_cube exchanges (new S/R: EXCH2_GET_UV_BOUNDS)
167      - no longer depend on the order sequence (N,S,E,W).
168      - 3rd exchange no longer needed (tested with 24 tiles).
169      - same modif to hand-written adjoint S/R (global_ocean.cs32x15: zero diff)
170      - exch_UV_A-grid readily available (but not yet tested).
171      comment out 3rd exch call and remove copy of V to U at SE & NE face-corners
172      (both are no longer needed) in exch_uv: no effect in forward run; but
173       get truncation error differences with adjoint exch.
174    o exch2:
175     - change index-bounds storage (moved from target to local tile,
176       more intuitive this way) ; rename/remove some variables.
177     - change utils/exch2/matlab-topology-generator & code_mods accordingly.
178    
179    checkpoint61a
180    o exch2/matlab-topology-generator:
181      fix bug in index bounds for N-S internal exchange (hard to tell if this
182      had any effect on the solution).
183    o pkg/mnc: small fix in mnc_handle_err: make sure that length of msgbuf
184      is exceeded
185    o testreport: modify syntax of awk, so that it works also with
186      awk, and not only with nawk and gawk
187    
188    checkpoint61
189    o autodiff
190      Change default for TAF usage by removing argument '-nonew_arg'
191      This changes TAF subroutine argument list (ordering of active var.)
192      Omission of this flag leads to incompatibility w.r.t. TAMC
193      To restore TAMC-compatibility, need following modifs:
194      * use adoptfile tools/adjoint_options/adjoint_tamc_compatibility
195      * use CPP option #define AUTODIFF_TAMC_COMPATIBILITY
196      Tested TAF version is 1.9.22
197      N.B.: exch2 hand-written adjoint code currently not TAMC compatible
198    
199    checkpoint60
200    --->>> This is the last checkpoint for which generating the adjoint
201    --->>> is done via the TAMC-compatibility TAF-flag "-nonewarg"
202    --->>> by default.
203    --->>> Future checkpoints will ommit this flag by default.
204    o pkg/generic_advdiff, os7mp: simplify and avoid division by zero.
205    o pkg/grdchk: Add gradient check to etan0 perturbations.
206    o pkg/exf: read ice area from file (#ifdef ALLOW_ICE_AREAMASK).
207    o pkg/autodiff: more flexibility in zeroadj.
208      model/src: modifying do_oceanic_phys.F accordingly.
209    o pkg/ctrl: Bounds for (kapgm,kapredi,eddypsi) parameter estimation.
210    o model/src and pkg/gmredi: GMREDI_WITH_STABLE_ADJOINT CPP option
211      special setup of gmredi for which the adjoint is stable
212      enough for parameter optimization.
213    o bridging the gap between eddy stress and GM.
214      -> eddyTau is replaced with eddyPsi (eddyTau = f x rho0 x eddyPsi)
215          along with a change in CPP option (now ALLOW_EDDYPSI).
216      -> when using GM w/ GM_AdvForm:
217          The total eddy streamfunction (Psi = eddyPsi + K x Slope)
218          is applied either in the tracer Eq. or in momentum Eq.
219          depending on data.gmredi (intro. GM_InMomAsStress).
220      -> ALLOW_EDDYPSI_CONTROL for estimation purpose.
221      The key modifications are in model/src/taueddy_external_forcing.F
222      pkg/gmredi/gmredi_calc_*F pkg/gmredi/gmredi_*transport.F
223    
224    checkpoint59r
225    o new S/R (pkg/mdsio/mdsio_facef_read.F) reading of sNx+1 x sNy+1 array
226      from per-face file (take S/R READSYMTILE_RS out of ini_curvilinear_grid.F);
227      fix option to read coriolis(@ cell-corner) from files with CS-grid.
228    o pkg/mnc: add some attributes to standard 1D-coordinate variables
229    o pkg/diagnostics: enforce missing_value attribute for scalar variables at
230      mass points, when using mnc for output
231      - add runtime parameter (missing_value, missing_value_int) to override
232        default (which is the value of getcon('UNDEF'))
233    o pkg/mnc: prepare mnc for the actual use of missing values with the
234      diagnostics package: small fix in mnc_cw_readwrite.template and more
235      initialisation of never used fields
236      - replace mnc_common.h and mnc_id_header.h with corresponding upper case
237      versions
238    o pkg/thsice/thsice_ini_vars.F added default initial values so that
239      thermodynamics sea ice solver does not blow up when some initial fields
240      are missing.
241    o move from external_forcing_surf.F to ini_forcing.F
242      the p-coord. hack consisting in using pLoad to set phi0surf ;
243      update output of tutorial_global_oce_in_p (affected @ truncation level).
244    o Freshen up a bit hs94.1x64x5, notably:
245      remove rotationPeriod and tRef=5*0. (adjoint only), and add
246      exactConserv=.TRUE.
247    o pkg/generic_advdiff:
248      change option GAD_ALLOW_SOM_ADVECT to GAD_ALLOW_TS_SOM_ADV which only
249      applies to files where Temperature & Salinity 2nd Order moments are used.
250    o pkg/ptracers: add second-order moment advection schemes (80 and 81);
251      this uses a dynamically allocated internal state data structure
252      (#define PTRACERS_ALLOW_DYN_STATE in PTRACERS_OPTIONS.h)
253      and requires a fortran 90 compiler
254    
255    checkpoint59q
256    o pkg/mom_vecinv: Add energy & enstrophy conserving scheme (selectVortScheme=3)
257       (from Sadourny, described by Burridge & Haseler, ECMWF Rep.4, 1977)
258    o Refresh tutorial_global_oce_biogeo, notably:
259      - change bathymetry (put back seamounts in ACC, use hFacs)
260      - change EOS (POLY3 --> JMD95Z)
261      - use Bryan-Lewis vertical diffusivity
262      - use multidimensional advection
263      - remove old virtual virtual in dic pkg, now done through ptracer pkg
264      - change a couple of parameters in dic pkg
265    o pkg/ctrl: change formula in adctrl_bound.F and add a parameter to ctrl_map_ini_gen.F
266    o pkg/obcs: change default to OBCSfixTopo = .true.,
267      - set OBCSfixTopo=.false. in exp4/input/data.obcs to reproduce old result
268      - replace "debugMode" with "debugLevel .GE. debLevB"
269    o implementation of TAF directives for gchem,cfc,dic
270    o remove "exp5" (replaced by tutorial_deep_convection).
271    o pkg/obcs: add code to fix topography gradients normal to open boundaries;
272      this requires computing the index fields OB_Jn/Js/Ie/Iw in obcs_readparms;
273      the code can be turned on by setting OBCSfixTopo = .true. in data.obcs
274      --> changes results in exp4, seaice_obcs
275    o tutorial_deep_convection :
276      update the set-up and increase resolution and domain size ; start
277      from pseudo initial conditions = output at t=120mn in order to see
278      something happening when running testreport.
279    o pkg/seaice: add os7mp as an advection scheme
280                  add check for advection schemes
281                  add a flag for restoring T and S underneath sea ice
282    o pkg/my82: add netcdf-support and diagnostics
283    o thsice pkg:
284      - Now hsMax limits snow height by turning it into ice following
285        flooding scheme (and now conserving energy)
286      - Slight rewriting of the formula in thsice_calc_thick.F
287      - Parameter rhowi eliminated to be replaced by floodFac = (rhosw-rhoi)/rhos
288      --> changes results of global_ocean.cs32x15.icedyn and global_ocean.cs32x15.thsice
289    
290    checkpoint59p
291    o gchem / dic / cfc :
292      - add useDIC, useCFC , read from "data.gchem" (& hold in GCHEM.h);
293      - add new parameter files: "data.dic" & "data.cfc" ;
294      - various re-arrangement in initialisation & header file ;
295      - fix tutorial_global_oce_biogeo for multi-threaded test.
296    o pkg/dic: test for "pickup_dic" file when restarting ;
297      if no pickup-file, can restart with a re-initialised pH (same as it did
298      before) providing pickupStrictlyMatch is set to False.
299    o change argument list of S/R PTRACERS_WRITE_PICKUP & MYPACKAGE_WRITE_PICKUP
300      + fix call to S/R GGL90_WRITE_PICKUP & DIC_WRITE_PICKUP
301    o add a "warning" (to Error msg file) when an Active Tracer is not using AB-2
302      and staggerTimeStep is off (needed for stability of Internal-wave dynamics).
303    o move out of PARAMS.h & data the last pieces of old-ptracer code: tauTr1ClimRelax,
304     & lambdaTr1ClimRelax ; put those 2 params in PTRACERS_PARAMS.h & data.ptracers
305       (note: not clear to me what lambdaTr1ClimRelax is still used for ...)
306    o pkg/mom_vecinv: - new parameter "selectVortScheme" to select which
307       scheme to use for vorticty-term ;
308     - compute upwindVorticity=T case within mom_vi_u/v_coriolis_c4.F
309       (with default selectVortScheme, return to original discretisation)
310     - remove weird combination (e.g.: upwindVorticity & highOrderVorticity)
311    o pkg/seaice: add a line to the summary to indicate grid type (B/C)
312    o in mom_calc_visc, fix average value of viscAh_W & viscA4_W next to the
313      bottom ; only used with variable horizontal viscosity and non-hydrostatic.
314      also fix diagnostics VISCAHW & VISCA4W.
315    
316    checkpoint59o
317    o dome/code/obcs_calc.F: avoid division by zero (detected using gfortran).
318    o change the loop ordering in most gad_*_adv_x.F to improve vectorization:
319      move a few statemens out the main loop into separate loops
320    o pkg/shelfice:
321      - sort out freshwater flux; convert freshwater fluxes to mass fluxes
322        (kg/m^2/s), does not break tests, because in verification/isomip,
323        rhoConstFresh=rhoConst (by accident)
324      - rearrange computation of tLoc, sLoc, pLoc to make code more efficient
325      - move S/R find_rho_scalar, pkg/ecco/sw_ptmp.F, pkg/ecco/sw_adtg.F into
326        new file model/src/seawater.F, so that they are available for all pkgs.
327      - convert potential temperature into in-situ temperature. This changes the
328        isomip tests => update tests
329    o add a flag writePickupAtEnd (default=true) to be able to suppress
330      writing a pickup at the last timestep
331    o tools/mpack-1.6 :
332      - disable automake (not working) and autoconf (not needed).
333      - update to version 1.6.4 which fix MD5 code on some 64 bits platforms
334        also cleaner with much less compilation warnings.
335    o pkg/profiles:
336      rename profiles_interp_mean_genericgrid as profiles_interp_mean_gg
337      (for "less than 32 characters name" compiler requirement)
338    o pkg/obcs and pkg/exf: added capability to specify seaice open boundary
339      conditions that have a different sampling frequency than S/T/U/V obcs
340    o pkg/diagnostics (stats-diags):
341      - fix global Min/Max in case 1 processor get only empty tiles
342    o genmake2: replace (4 times)
343         make genmake_tc_1.o >> genmake_warnings 2>&1
344      with
345         COMM="$CC $CFLAGS -c genmake_tc_1.c"
346         echo $COMM >> genmake_warnings
347         $COMM >> genmake_warnings 2>&1
348      to make genmake2 always see the value of CC as specified in the optfile.
349    o generic_advdiff: - prather advection scheme (SOM) coded for CS-grid.
350      - add diagnostics for 1srt & 2nd Order moments and sub-grid variance.
351      - modify verification advect_cs test to test SOM-advection on CS-grid.
352    o pkg/ctrl:
353      - Rewrite of ctrl_map_ini_ecco.F,
354        introducing a generic routine (ctrl_map_ini_gen.F).
355      - Modification of ctrl_bound/adctrl_bound handling control vector bounds.
356    
357    checkpoint59n
358    o pkg/diagnostics: for large number of diagnostics, store diagnostic mate
359      number in dedicate array "hdiag":
360      - new version of S/R DIAGNOSTICS_ADD2LIST : DIAGNOSTICS_ADDTOLIST
361        with 1 more argument (mate number); modify old version DIAGNOSTICS_ADD2LIST.
362      - many small changes (integer format) for large number of diagnostics
363      - start to use DIAGNOSTICS_ADDTOLIST (necessary for diagnostics with
364        a counter mate) in pkg diagnostics, ptracers, thsice & aim_v23.
365    o add parameter rotateGrid and Euler angles EulerPhi/Theta/Psi. For
366      usingSphericalGrid, this allows to define the rotated grid coordinates
367      via phiMin/thetaMin/dxSpacing/dySpacing, etc., but then re-compute the
368      geographical coordinates according to the inverse of the rotation defined
369      by the Euler angles, so that Coriolis parameter and online-interpolation by
370      exf works with the geographical coordinates on XC/YC/XG/YG.
371      Naturally, this feature does not work with all packages, so some
372      combinations are prohibited in config_summary (flt, flt_zonal, ecco,
373      profiles), because there the coordinates are assumed to be regular
374      spherical grid coordinates.
375    o pkg/gmredi,ctrl,ecco,autodiff,grdchk and model/src,inc:
376      - introduce isopycnal diffusion coefficient control.
377    o tools/adjoint_options:
378      - additional control vector components.
379    o pkg/mnc: have mnc create marginally meaning full coordinate variables
380      (that is the grid indices) if usingCurvilinearGrid and NOT EXCH2
381    o pkg/mypackage:
382      - add example of read/write pickup for state-var ;
383      - add entry points to the main code for state-vars diags & write-pickup.
384    o pkg/exf: rewrite of exf_getffieldrec.F to properly deal with year
385      transitions for useExfYearlyFields
386      - add new subroutine that determines the file to read from for
387        use*YearlyFields = .TRUE. and .FALSE.
388      - add a verification experiment to global_with_exf that tests
389        useExfYearlyFields with USE_EXF_INTERPOLATION defined
390    o pkg/obcs/exf: add useOBCSYearlyFields (=.FALSE.) to obcs with exf in
391      analogy to useExfYearlyFields; rearrange obcs_prescribe_read: two new
392      subroutines (which could be generated from a template, because they are
393      almost identical), for now they are included in obcs_prescribe_read.F for
394      simplicity
395    o pkg/exf:
396      - add a little more diagnostic to exf_interp_read (in analogy to
397        mds_read_field, can be turned off with debugLevel < debugLevA=1)
398      - improve vectorizability of exf_interp for TARGET_NEC_SX, makes code
399        ugly but fast by unrolling short inner loops, inserting a unroll=8
400        directive in routine lagran, and splitting a loop and making do while the
401        outermost loop (the latter requires the intoduction of index arrays)
402  o pkg/obcs: replace obcs_apply_area/heff/hsalt/hsnow with obcs_apply_seaice  o pkg/obcs: replace obcs_apply_area/heff/hsalt/hsnow with obcs_apply_seaice
403  o pkg/seaice: moved DIFFERENT_MULTIPLE from seaice_model to seaice_dynsolver  o pkg/seaice: moved DIFFERENT_MULTIPLE from seaice_model to seaice_dynsolver
404    http://forge.csail.mit.edu/pipermail/mitgcm-devel/2008-January/003173.html    http://forge.csail.mit.edu/pipermail/mitgcm-devel/2008-January/003173.html

Legend:
Removed from v.1.942  
changed lines
  Added in v.1.1061

  ViewVC Help
Powered by ViewVC 1.1.22