/[MITgcm]/MITgcm/doc/tag-index
ViewVC logotype

Diff of /MITgcm/doc/tag-index

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph | View Patch Patch

revision 1.519 by heimbach, Thu Jul 28 14:35:47 2005 UTC revision 1.602 by jmc, Thu Jan 26 01:57:44 2006 UTC
# Line 4  $Name$ Line 4  $Name$
4      Notes on tags used in MITgcmUV      Notes on tags used in MITgcmUV
5      ==============================      ==============================
6    
7  o adding precip control xx_precip  o AIM pkg: change threshold on large-scale condensation to conserve Heat.
8  o moved ptracer ctrl index 17 -> 32     update results of aim.5l_LatLon test ; fix title & units of AIM diagnostics
9       and  change 3 diagnostics names (OSR,OSRCLR,KM -> TSR,TSRCLR,DRAG)
10    o pkg/diagnostics: add options and parameters for regional-statistics
11       diagnostics ; define regions by reading a region-mask from a file
12       (might add other options later)
13    o pkg/bulk_force:
14     - add option and parameters to use AIM surface-flux formulae.
15     - Change loading part: S/R BULKF_FIELDS_LOAD only take care of bulkf_fields ;
16       others forcing fields (defined in PARM05, parameter file "data") are loaded
17       from S/R EXTERNAL_FIELDS_LOAD, as usually (with useBulkforce = T or F).
18     - initialise all bulkf_fields in bulkf_init.F ; do in-lining of exf_bulkcdn.F
19     - use the right EXCH call for uwind,vwind (to work on CS-grid).
20     - re-arrange header files (move parameters from BULKF.h to BULKF_PARAMS.h)
21       and parameters (note: calcWindStress replaces .NOT.readwindstress).
22     - cleaner interface with pkg/thSIce (new S/R THSICE_GET_PRECIP).
23    
24    checkpoint58
25    o add "--embed-source" option to genmake2 which, when the supporting
26      tools can be compiled (as determined by genmake2) will turn on the
27      embed_files package which then embeds the entire MITgcm source code
28      (*.[fFhc] + Makefile) used for the build within the executable
29      - requested by CNH but off by default
30      - adds a paltry <9MB to the mitgcmuv executable in most cases
31      - only writes the output when useEMBEDSRC in eedata is true
32    o clean up 3-dim. relaxation codes:
33      * Fix I/O inconsistency in pkg/rbcs: replace precFloat32 by readBinaryPrec
34      * Remove 3-dim. relaxation code from pkg/exf (now use only pkg/rbcs)
35      * Thanks to Tom Haine for testing!
36    
37    checkpoint57z_post
38    o make CG3D solver compatible with Free-surface at k > 1 (p-coordinate):
39      affects output (@ truncation level) of exp. plume_on_slope ; updated.
40    o fix the pickup behavior for obcs in combination with ptracers
41    o fix a bug in ptracers_external_fields_load
42    o no AB-2 at the first iteration for Gw (consistent with Gu,Gv,Gt,Gs ...)
43      affects results of NH experiments (but all our NH tests have Gw[it=1]==0 !!)
44    o transfered surface NH pressure to eta field (if exactConserv).
45    o gmredi: fix bugs in slope tapering ldd97 (depthZ had the wrong sign)
46         and update lab_sea output.txt file.
47    o completing 3-dim. relaxation code: additional term
48         1/tau*( theta(i,j,k) - thetaStar(i,j,k) )
49      in S/R EXTERNAL_FORCING_T (file external_forcing.F)
50      * At compile time, in "EXF_OPTIONS.h" set
51          #define  ALLOW_CLIMTEMP_RELAXATION
52          #define  ALLOW_CLIMSALT_RELAXATION
53      * At runtime in "data", under &PARM03 set (e.g., units in seconds)
54          tauThetaClimRelax3Dim = 15552000.0,
55          tauSaltClimRelax3Dim  = 15552000.0,
56      * 3 cases:
57          1) Use a constant-in-time 3-dim. field
58          2) Provide 12 3-dim. fields corresponding to Jan., ... , Dec.
59          3) Real-time relax. to time-evolving prescribed field
60    o Adding Laplacian-type smoothness constraint on
61      initial and boundary (forcing) controls (ic, bc)
62      * enable at compile-time via
63        ALLOW_SMOOTH_IC_COST_CONTRIBUTION, ALLOW_SMOOTH_BC_COST_CONTRIBUTION
64      * enable at run-time via mult_smooth_ic = 1, mult_smooth_bc = 1
65      * Absolute scale somewhat unclear so far
66      * no area weighting was included since no other cost term does so far
67    
68    checkpoint57y_post
69    First step for a NLFS adjoint
70    o initially suppress rStar (new flag DISABLE_RSTAR_CODE)
71    o new init. routines for calc_r_star, calc_surf_dr
72    o still need to deal with ini_masks_etc
73    o testreport seemed happy
74    checkpoint57y_pre
75    
76    o obcs: always reset wVel & eta (to zero or prescribe it) at the OBs.
77    o add new package rbcs (for relaxing ptracers at boundaries/depth/surface etc)
78    o add new offset feature to offline pkg (plus minor cleanup)
79    o cfc fixes for final year of integration
80    o clean up GCHEM_OPTIONS.h/DIC_OPTIONS.h (all options should
81      be in GCHEM_OPTIONS).
82    
83    checkpoint57x_post
84    o fix testreport Pb in multiple test experiment.
85    o cleanup our namelist syntax in verification:
86      - make it more F95 standards compliant (some work still needed)
87      - allows the vast majority of our tests to work with gfortran
88    o Non-Hydrostatic:
89     - put all NH variables (formerly in DYNVARS.h & GW.h) in NH_VARS.h
90     - fix exchange calls for CS-grid using the new EXCH_S3D_RL.
91    o Allow to apply AB on T,S rather than on AB(gT,gS):
92     - implemented within #ifdef ALLOW_ADAMSBASHFORTH_3
93     - use the same arrays (gtNm,gsNm) to hold tracer field at previous
94       time-steps (if AB(T,S)) and tendencies (if AB(gT,gS)).
95     - need a "clever" read_pickup to restart from the other AB formulation
96    o move local commom bloc /GlobalLo/ (used for singleCpuIO) in EESUPPORT.h
97    o remove some unused variables (reduces number of compiler warnings)
98    o adjoint
99      * Disable useVariableViscosity for adjoint for time being
100        (there are a number of extensive recomputations)
101      * Initialize certain variables needed for adjoint
102    
103    checkpoint57w_post
104    o pkg/mdsio: use MAX_LEN_FNAM (instead of hard coded 80) for file-names
105                 fix the singleCpuIO RS version of MDSWRITEFIELD
106       and add a WARNING if using globalFiles=T with multi-processors.
107    o write grid-file(s) in only one format (MDS or MNC): default=MNC (if
108      using MNC); can force MDS output by setting writegrid_mnc=F in data.mnc
109    o tracer advection scheme:
110      add DST-2 (=Lax-Wendroff) & 1rst order upwind schemes (the way to get
111       those 2 schemes before, changing GAD_FLUX_LIMITER.h + to recompile,
112       was not very convenient).
113      add implicit version for DST-3 & DST3_Flux_Limit vertical advection;  
114       (further tests needed for the implicit DST & Flux-Limiter schemes).
115    o PTRACERS: added namelist parameter PTRACERS_ref in analogy to tRef
116      and sRef for convenience, handy, when you want to initialize
117      ptracers in a large domain with a constant non-zero value. Also,
118      untangle ptracers_init.F a little.
119    
120    checkpoint57v_post
121    o change dome exp. to use variable viscosity in side-drag terms.
122    o remove all the files from the cfc_offline test since they are now
123      incorporated into tutorial_cfc_offline which has been producing
124      identical results for a few days of testing
125    o add new parameter: sideDragFactor to enable half-slip-side BC
126      and change side-drag S/R to use viscosity from mom_calc_visc
127      (can switch back by setting sideDragFactor=0.); affects results at
128      truncation level; regenerate output for exp.: global_ocean.cs32x10(x3),
129       global_ocean_ebm, global_ocean_pressure, matrix_example & MLAdjust(x5).
130    o vorticity & strain are now computed without masking, to account for
131      no-slip-side BC in variable viscosity calculation ; mask is applied
132      anyway later on, before computing advection/coriolis terms.
133    o modify exp4 to test new obcs support for reading from external files
134      and for passive tracers
135    o fix behavior of ptracers_monitor when monitor output is written to a
136      netcdf-file; still not independent of monitor.F (writes in the same
137      file).
138    o change default value of tRef (put a uniform, meaningful value for ocean
139      & atmos) and initialize sRef (was missing, as Martin mentioned).
140    o Redefine viscC?Leith*.  Change the coefficients of Leith viscosity
141      to be proportional to enstrophy dissipation length.  Thus,
142       viscC?leith?_new=pi*(viscC?leith?_old)^(1/3)
143      This is now consistent with Smagorinsky and with the manual.
144    
145    checkpoint57u_post
146    o OBCS and PTRACERS: add open boundary support for passive tracers
147      - either use homogenous (pseudo) v.Neumann conditions or prescribe
148        OB-values from file; this is not different from the way theta and salinity
149        are treated
150      - however, Orlanski-radiation conditions are not supported, and the model
151        will stop if you use pTracers and Orlanski at the same time.
152      - beefed up the rountine obcs_external_fields_load: now only those open
153        boundary values are overwritten with values from files for which there
154        are really files, otherwise the OB-fields remain untouched. This makes
155        it possible to use different OBs at different ends of the domain (as
156        with EXF)
157    o reduce number of exch calls in shap_filt (s2).
158    o CS-grid: fix divergence contribution to Leith viscosity. Affects (@
159      truncation level) 4/5 MLAdjust test results (11&12 digits match).
160    
161    checkpoint57t_post
162    o test biharmonic viscosity + no-slip with exp: global_ocean.cs32x15.viscA4
163    o finish adding brackets (coriolis S/R, vecinv) in multi-terms sum to get
164      same truncation, independent of the face number: affects affects several
165      test. exp.: Update global_ocean.cs32x15 (+.thsice) & MLAdjust (all 5).
166    o fix bug in mom_v_sidedrag (biharmonic viscosity was counted 2 times);
167      note that biharmonic viscosity + no-slip was not tested in any experiment.
168    o fix bug in non-linear free-surf side-drag ; generate new output for
169      global_ocean.cs32x15(+.thsice) & global_ocean_pressure.
170    o make mnc honor the writeBinaryPrec flag for most kinds of output
171    o eesupp: split EEPARAMS into EESIZE/EEPARAMS and add a vector global sum
172    o minor change in averaging W (mom_vi_?_vertshear.F) that affects truncation
173      error; update output from global_ocean.cs32x15(+.thsice) & MLAdjust (all 5).
174    o add brackets in multi-terms sum to get same truncation, independent of
175      the face number (manage to get exactly same value of gU,gV at the cs-edge)
176      affects several test. exp. Update global_ocean.cs32x15 (+.thsice).
177    o Clean, new version of mom_calc_visc.  Adds a new feature, viscAhRemax
178      and viscA4Remax, which allow one to limit the minimum viscosity by specifying
179      a maximum grid-scale Reynolds number.  Also, changes all length calculations
180      in the case of grid anisotropy to geometric mean of dx**2 and dy**2.
181      Suggested values of viscosity parameters found in mom_calc_visc.
182      Many new viscosity diagnostics available.
183    
184    checkpoint57s_post
185    o Add clearing-house for viscosity calculations, mom_calc_visc and
186      correct numerous bugs in LeithD and Smagorinsky discretizations.  
187      mom_calc_visc now allows for Smagorinsky, Leith and LeithD to be
188      used simultaneously, and to be used in mom_vecinv and mom_fluxform.
189      Mom_vecinv can be used with standard viscous calculation (mom_vi_hdissip.F)
190      and with Strain-Tension viscous term calculation (mom_hdissip.F).  
191      The Strain-Tension form is now called with useStrainTensonVisc=.true.
192      ViscAhStrain and viscAhTension are now retired.
193    o diagnostics "VISCAHD" & "VISCA4D" replace "VISCAH" & "VISCA4".
194    o In response to JMC's bug report, genmake2 now ignores any soft-links
195      that it finds in the *current* directory when searching for files.
196      Soft-links found in any other source directories will still work as
197      they did before.
198    o add HAVE_SETRLSTK define and useSETRLSTK flag (eedata) which calls
199      a C routine to unlimit the stack size
200    o mnc-ify pkg/aim snapshot vars
201    o mnc-ify pkg/land as requested by Daniel
202    o various changes to mnc including:
203      - all files use the new "BASENAME[[.ITER].{t|f}NUM].nc" format
204      - output can now be grouped so that all files within a group
205          change the ITER portion of their names in lock-step together
206      - can now read ("global") PER-FACE (in addition to PER-TILE) files
207          and works with both EXCH1 and EXCH2 (but needs more testing)
208      - writing works for all verification test cases w/ g77 on Linux
209    
210    checkpoint57r_post
211    o make MNC variable initialization happen earlier
212    o add diagnostics for (almost) each term of the momentum Eq.
213    o remove SST,SSS,UVEL_k2,VVEL_k2 diagnostics.
214    o move pkg timeave out of pkg-groups "oceanic" & "atmospheric" (pkg/pkg_groups)
215    o remove MINIMAL_TAVE_OUTPUT option ;
216      add "dumpInitAndLast" to replace "nodumps" (and MINIMAL_TAVE_OUTPUT).
217    o move some basic S/R (used elsewhere in the code) from pkg/mdsio to eesupp/src
218      allows to compile without pkg/mdsio (& test successfully hs94.1x64x5)
219    o add MNC output for adjoint of EXF (adexf), SEAICE (adseaice)
220    o add time-dependent SST, SSS control
221    o cost terms in ecco/ modularized (new cost_generic.F)
222    o cost_averages routines are modularized (new cost_averagesgeneric.F)
223    o new infrastructure for seaice model vs. obs misfits in seaice/
224      * driver from the_main_loop.F is seaice_cost_driver.F
225      * first term is AREA vs. SMR observation misfit (ALLOW_SEAICE_COST_SMR_AREA)
226      * gradient check in Exp. 6a of natl_box_adjoint/
227    o natl_box_adjoint input_seaice for Lab. Sea now available online via wget
228      (see README file)
229    
230    checkpoint57q_post
231    o fix initialisation Pb in calc_gw (get NANs in exp5 with g77)
232    o fix annoying months-old bug in mnc/mdsio output for seaice pkg
233      - bug was reported by Jean-Michel and Ian Fenty
234    o fix initialization Pb in AIM-Ocean coupled model (aim_sice2aim.F)
235      update exp. cpl_aim+ocn output.
236    o Implement 4-level checkpointing: AUTODIFF_4_LEVEL_CHECKPOINT
237      Needed for high-res. runs with large global files
238      to be able to limit tapelev size
239    o Changed some tests for adjoint:
240      * carbon/ now tests AUTODIFF_2_LEVEL_CHECKPOINT
241      * natl_box_adjoint/code_bulk/ tests AUTODIFF_4_LEVEL_CHECKPOINT
242      * global_ocean.90x40x15/ back to default 3-level checkpointing
243    o Modifications to enable scripted COMMON to MODULE conversion
244      * verification/OpenAD/code/ has necessary scripts and description;
245      * converts, compiles and runs successfully;
246    
247    checkpoint57p_post
248    o reading of delXfile & delYfile moved from ini_parms.F to ini_grid.F
249    o move ${PKG}_MNC_INIT from ${PKG}_READ_PARAMS to ${PKG}_INIT_FIXED
250      (already the case for some pkgs, including recent MNC_init, e.g. thsice)
251    o call CALC_GW from DYNAMICS (instead of from FORWARD_STEP)
252    o Dissipation & phiHyd gradient are always added to gU,gV in timestep.F
253      (was already the case for dissipation with mom_vecinv,
254       and also the case for grad.PhiHyd when staggered-timeStep)
255      This will allow to put dissipation out-off the AB time-stepping.
256     Unfortunately, affects truncation error. Update output of exp. that "fails"
257      (cg2d matching number) and leave the others for later: front_relax(10),
258      global_ocean_pressure(10),ideal_2D_oce(10),internal_wave(9),lab_sea(12),
259      matrix_example(7!),natl_box(12),plume_on_slope(11),vermix(12x3,11x2).
260    
261    checkpoint57o_post
262    o fix MNC/MDSIO flags in PTRACERS so that (1) it works, and
263      (2) its ready to be documented during the 20050801 DocFest
264    o MNC-ify the gmredi package -- tested and works w/ and w/o mnc
265      for ideal_2D_oce and lab_sea on linux_ia32_g77
266    o set to #undef CTRL_SET_OLD_MAXCVARS_30
267      in global1x1_tot/code_seaice_adj to access indices 32, 33
268      (worth another tag)
269    
270    checkpoint57n_post
271    o adding precip control xx_precip 32
272    o adding swflux control xx_swflux 33
273    o Replacing 10 forcing penalty cost routines by 1 generic.
274    o Implementing partitioning in time-mean and variable adjustment
275      for atmos. state.
276    o Time-mean constant error is now read in data.ecco (instead of hard-coded)
277  o in natl_box_adjoint:  o in natl_box_adjoint:
278    * updated: results_bulk/    * updated exp 1 to 10
279    * not yet updated: results/, results_seaice/      (but does not have time-mean vs. variable split results yet)
280    o updated global1x1/*_seaice_adj/
281      to incorporate latest changes
282    o enable useSingleCpuIO for mdsio vector routines
283      (applies in particular to tapelev I/O)
284    o removed inefficient K-loop in all active_file*control*.F
285    
286  checkpoint57m_post  checkpoint57m_post
287  o re-arrange exp. adjustment.cs-32x32x1 (adjust_nlfs.cs-32x32x1 merge into)  o re-arrange exp. adjustment.cs-32x32x1 (adjust_nlfs.cs-32x32x1 merge into)

Legend:
Removed from v.1.519  
changed lines
  Added in v.1.602

  ViewVC Help
Powered by ViewVC 1.1.22