/[MITgcm]/MITgcm/doc/tag-index
ViewVC logotype

Diff of /MITgcm/doc/tag-index

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph | View Patch Patch

revision 1.1901 by jmc, Thu Jul 25 01:12:45 2013 UTC revision 1.2097 by mlosch, Fri Nov 28 14:19:20 2014 UTC
# Line 4  $Name$ Line 4  $Name$
4      Notes on tags used in MITgcmUV      Notes on tags used in MITgcmUV
5      ==============================      ==============================
6    
7    o pkg/autodiff
8      - add extra exchanges in addummy_in_steppging also for mnc output
9    o pkg/seaice:
10      - add extra exchanges before dumping adjoint fields in seaice_ad_dump.F
11        to avoid stripes in the adjoint output (similar to addummy_in_stepping.F)
12    o pkg/obcs:
13      - add option to specify domain-connected piece Id along OB though files
14        (for now, only used to diagnose PhiVel; default =1 -> global correction)
15      - modify obcs_diag_balance.F to process each connected-part separately;
16        exclude OB where Id = 0 but keep the full divergence there (-> constant
17        Psi along this portion of OB and all inflow derived from grad(Phi))
18      - add example of OB-conect files in verification/so_box_biogeo/input.
19    o pkg/diagnostics:
20      - improve treatment of Open-Boundaries in Velocity-Potential calculation:
21      a) use non zero matrix element across OB and solve for Phi 1 grid point
22         outside OB (i.e, where tracer OBCS are applied).
23      b) global imbalance of inFlow/outFlow across OB: instead of modifying
24         velocity across OB, spread it uniformly along the OB in the RHS.
25    
26    checkpoint65g (2014/11/19)
27    o pkg/diagnostcis:
28      - add preconditioner off-diagonal factor (diagCG_pcOffDFac) as run-time param
29    o pkg/my82,pp81,kl10:
30      - fix ALLOW_3D_DIFFKR implementation (previously had no effect): use 3-D
31        field diffKr as background diffusivity to set minimum diffusivity value.
32    o pkg/seaice:
33      - add new parameter SEAICEuseEVPrev (for revisited EVP by
34        Bouillon et al 2013)
35      - add SEAICE_evpAlpha/Beta to namelist
36      - modify seaice_evp code to able to use SEAICEuseEVPrev. These changes
37        involve trivial re-ordering of divisions/multiplications that should not
38        have any effects, but ... they do change the results of lab_sea.hb87 so
39        that only 2 digits of agreement remain, in line with the general
40        instability/fragility of the evp-code. For now, I do not care and just
41        update the verification experiment
42    o pkg/ctrl : add generic pre-processing (xx_genarr2d_preproc etc)
43      - remove xx_genarr2d_numsmooth etc
44      - use xx_genarr2d_preproc etc instead
45      - carry out smooth_correl2D at initialization stage rather than during
46        time stepping.
47      - get smoothOpNb from xx_gentim2d_preproc
48    o global_oce_cs32 :
49      - add test of generic ecco capabilities.
50    o pkg/exf/exf_getsurfacefluxes.F :
51      - add to tmpUE/tmpVN rather than re-initializing them (conventional behavior).
52    o pkg/ctrl,ecco :
53      - omit un-necessary arguments to ctrl_cost_gen.F unless ECCO_CTRL_DEPRECATED
54        is defined.
55    o pkg/seaice: add diagnostics for Delta (deformation parameter)
56    o model/src:
57      - when ALLOW_3D_DIFFKR is defined, add a Warning if any of the vertical
58        diffusivity (background) is specified but ignored.
59    o verification:
60      - in testreport, convert hostname to lower case for default output dir name
61    o model, pkg : add useCTRL, useECCO parameters (on/off run time switch).
62    o pkg/dic: add modifications from Hajoon:
63      - add iron sedimentation flux function of the flux of PO4 out of bottom layer
64      - light attenuation: add self-shading effect by climatological Chlorophyll
65        (read from file).
66    o pkg/seaice/seaice_preconditioner.F : fix cpp flags, so that code also
67        compiles when SEAICE_ALLOW_DYNAMICS is undefined
68    o global_oce_llc90,cs32 : ecco_v4 verification exps now use separate
69        AUTODIFF_OPTIONS.h, CTRL_OPTIONS.h, ECCO_OPTIONS.h rather than
70        ECCO_CPPOPTIONS.h (i.e. replacing the deprecated, circumvoluted,
71        approach where CPP_OPTIONS.h includes an omnipotent
72        ECCO_CPPOPTIONS.h that superseeds pkgs '_OPTIONS.h').
73    o pkg/ctrl/ctrl_map_ini_genarr.F : include GMREDI_OPTIONS.h where
74        ALLOW_3D_KAPGM, ALLOW_3D_KAPREDI (to be added later) belong.
75    o pkg/seaice/SEAICE_SIZE.h : replace ALLOW_AUTODIFF_TAMC with ALLOW_AUTODIFF
76        to avoid needing AUTODIFF_OPTIONS.h anytime SEAICE_SIZE.h is included
77        (it seems that THSICE_SIZE.h, PTRACERS_SIZE.h have the same issue...)
78    o model/src, pkg/smooth, profiles, salt_plume, seaice, exf, ecco, ctrl :
79      add ECCO_OPTIONS.h, AUTODIFF_OPTIONS.h, CTRL_OPTIONS.h when needed
80      - ECCO_OPTIONS.h is needed when including ecco_cost.h, ecco.h
81      - AUTODIFF_OPTIONS.h is needed when including tamc.h, tamc_keys.h
82      - CTRL_OPTIONS.h is needed when including ctrl.h, optim.h, etc
83    o pkg/ctrl,ecco,exf :
84      - remove variables associated with NON-generic costs,
85        unless ECCO_CTRL_DEPRECATED is defined.
86      - remove NON-generic NON-obcs controls,
87        unless ECCO_CTRL_DEPRECATED is defined.
88    o pkg/ctrl : added ctrl_local_params.h
89    o pkg/ecco : added ecco_local_params.h
90    o verification : added ECCO_CTRL_DEPRECATED to most as and oad
91        experiments, which will progressively be removed once the
92        experiments are revised to use only generic controls/costs.
93    
94    checkpoint65f (2014/10/13)
95    o pkg/ctrl, ecco, seaice : minor changes in headers
96    o global_oce_llc90,cs32 : ecco_v4 verification exps now test generic
97        cost function and control capabilities added since checkpoint65c.
98    o pkg/ctrl: regroup all obcs ctrl variables in CTRL_OBCS.h.
99    o pkg/ecco: increase modularity and improve logic
100      - ecco_toolbox.F (new) : basic operations that are often used,
101        including ecco_zero, ecco_cp, ecco_cprsrl, ecco_diffmsk,
102        ecco_addcost, ecco_add, ecco_div, ecco_readbar.
103      - cost_gencal.F (new) : determine filnames and records.
104      - cost_genread.F, cost_generic.F : condense code using ecco_toolbox.
105      - cost_generic.F : use spzeroloc rather than hard-coded -9999,
106        and exploit the above functions leading to more compact code.
107      - cost_genread.F : rm un-necessary arguments, re-arrange args order.
108      - ecco_check.F, ecco_readparms.F : bring logic up to date (using_tpj,
109        using_ers, using_gfo, using_mdt is now only defined within gencost)
110    o pkg/ecco: extend generic cost capabilities
111      - pkg/ecco : added 3D gencost (ALLOW_GENCOST3D), added gencost
112        capabilities via gencost_preproc (+ _c,_i,_r related params),
113        gencost_posproc (+ _c,_i,_r related params), gencost_nrecperiod,
114        gencost_outputlevel arguments to cost_generic
115      - pkg/ecco/cost_genread.F (new) : interface between cost_generic
116        and active_read, making room for gencost_preproc to take effect.
117        Added preproc code ('climmon') to replace GENERIC_BAR_MONTH.
118      - pkg/ecco/cost_generic.F :
119        compute and store misfit maks*(model-data) in localdif that is
120        then used in cost and for output, output misfit if outlev.GT.0
121      - pkg/ecco/cost_averagesfields.F : depend on gencost_barskip
122        rather gencost_barfile for deciding whether to write barfile
123      - pkg/ecco/ecco_cost_driver.F : extract call to cost_profiles from cost_hyd
124      - pkg/ecco/ecco_cost_init_fixed.F : extract gencost weights from
125        ecco_cost_weights, re-activate ecco_summary, determine gencost_barskip
126      - pkg/ecco/ecco_summary.F : report gencost variables
127      - pkg/ecco/cost_gencost_customize.F : treat case of scatterometer costs
128    o pkg/sea/SEAICE_OPTIONS.h : add ALLOW_COST_ICE, ALLOW_SEAICE_COST_SMR_AREA
129    o pkg/ecco: internal re-organization
130      - resolve un-necessary dependancies within pkg/ecco and to pkg/ctrl
131        (rm includes of optim.h and ctrl.h, replace optimcycle with eccoiter,
132        mv relevant variables definition from ecco_cost.h to ecco.h,
133        make sure gencost routines only include ecco.h)
134      - throughout : add missing CCP switches, rm unused variables,
135        and rm un-necessary CPP switches
136      - throughout gencost routines : replace modelstartdate with
137        gencost_startdate when needed
138      - cost_bp_read.F : use arguments, instead of common blocs
139        so that it can be used also by (new) cost_gencost_bpv4.F
140      - ecco_init_varia.F : initialize RHOsumGlob_0, VOLsumGlob_0
141      - ecco_phys.F : compute etanFull
142      - ecco_readparms.F : rename using_topex as using_tpj, add
143        bpv4-grace to gencost list, initialize added parameters
144      - ecco_summary.F : include SIZE.h needed for augmented ecco.h
145    
146    checkpoint65e (2014/09/28)
147    o pkg/obcs:
148      - replaced the just-added CPP options with run-time variables
149        (see pkg/obcs/OBCS_PARAMS.h for details)
150    o pkg/obcs:
151      - add additional CPP options for sponge boundary layers
152        (see pkg/obcs/OBCS_OPTIONS.h for details)
153    o pkg/atm_phys:
154      - implement simple (obliquity only, assuming circular planet orbit)
155        seasonal cycle for incoming insolation ; used when run-time parameter
156        "select_incSW" is set to 1 ; by default (=0), uses old unchanged formula.
157    o pkg/exf, pkg/ecco, pkg/ctrl:
158      - add ctrlUseGen and .NOT.ctrlUseGen exclusive brackets
159      - activate gentim2d for xx_atemp,xx_aqh,xx_swdown,xx_lwdown,xx_precip
160      - implement gentim2d for xx_tauu, xx_tauv
161    o pkg/ctrl, pkg/ecco :
162      - fix and complement the generic controls implementation
163    o pkg/exf/exf_getclim.F, exf_getffields.F, exf_getsurfacefluxes.F,
164        pkg/shelfice/shelfice_thermodynamics.F,
165        verification/hs94.1x64x5/code_ad/ctrl_map_gentim2d.F,
166        verification/hs94.1x64x5/code_oad/ctrl_map_gentim2d.F :
167      - add weight in CTRL_GET_GEN calls
168    o pkg/ctrl :
169      - ctrl_get_gen.F : add weight as input parameter, and apply
170        it directly rather than using smooth_correl2Dw (to be retired).
171      - ctrl_map_gentim2d.F : add wgentim2d in CTRL_GET_GEN call
172    o pkg/ctrl :
173      - introduce run time switch ctrlUseGen (in ctrl.h, ctrl_check.F,
174        ctrl_init_variables.F, ctrl_readparms.F, ctrl_summary.F)
175      - re-activate ctrl_summary (call in ctrl_init.F)
176    o pkg/ctrl/ctrl_cost_gen.F :
177      - fix CCP brackets, remove un-necessary myiter, mytime
178    o pkg/ecco, pkg/ctrl :
179      - remove cost_genctrl.F (now pkg/ctrl/ctrl_cost_driver.F)
180      - remove cost_forcing_gen.F (now pkg/ctrl/ctrl_cost_gen2d.F)
181      - add ctrl_cost_driver.F (replaces pkg/ecco/cost_genctrl.F)
182      - add ctrl_cost_gen2d.F (replaces pkg/ecco/cost_forcing_gen.F)
183    
184    checkpoint65d (2014/09/15)
185    o pkg/ctrl/CTRL_GENARR.h, ctrl_readparms.F :
186      - add xx_genarr2d_bounds,xx_genarr3d_bounds,
187        xx_genarr2d_numsmooth, xx_genarr3d_numsmooth
188    o pkg/ctrl/ctrl_map_ini_genarr.F :
189      - remove compilation failure
190      - replace hard coded example
191      - use ctrl_map_ini_gen2D, 3D
192    o pkg/ctrl/ctrl_pack.F, ctrl_unpack.F :
193      - on/off switch based upon xx_genarr2d_weight,3d
194    o src/packages_init_variables.F :
195      - regroup pkg/estimation calls
196      - remove CTRL_MAP_INI, CTRL_MAP_INI_ECCO
197        (moved to ctrl_init_variables)
198    o cost/cost_init_varia.F :
199      - remove ecco_cost_init_varia
200        (moved to ecco_init_varia)
201    o ctrl/ctrl_init_variables.F :
202      - add CTRL_MAP_INI, CTRL_MAP_INI_ECCO
203      - add CTRL_MAP_INI_GENARR, SEAICE_CTRL_MAP_INI
204    o ctrl/ctrl_map_ini.F :
205      - remove ctrl_map_ini_genarr, seaice_ctrl_map_ini
206        (moved to ctrl_init_variables)
207    o ctrl/ctrl_map_ini_ecco.F :
208      - remove ECCO_PHYS (mv to ecco_init_varia)
209      - remove seaice_ctrl_map_ini (mv to ctrl_init_variables)
210    o ecco/ecco_ad_diff.list :
211      - add ecco_init_varia.f
212    o ecco/ecco_init_varia.F
213      - new routine
214    o pkg/streamice:
215      - move call to STREAMICE_INITIALIZE_PETSC from the_model_main.F
216        to streamice_init_fixed.F ; fix setting of STREAMICEisOn.
217      - from model/src, only call pkg/streamice routines if useStreamIce is TRUE.
218    o pkg/generic_advdiff:
219      - fix bug causing negatives in GAD_SMOLARKIEWICZ_HACK, introduced 8/8/2014.
220    o pkg/exf:
221      - exf_getffields.F : add xxg_atemp, xxg_aqh, xxg_swdown, xxg_lwdown,
222         xxg_precip capability
223      - exf_wind.F : no need for ALLOW_WSPEED_CONTROL cpp switch
224    o pkg/ctrl:
225      - ctrl_pack.F, ctrl_unpack.F : omit (un)packing of undefined xx_gentim2d
226    o model/src/load_fields_driver.F :
227      - move call to CTRL_MAP_GENTIM2D ahead of BULKF_FIELDS_LOAD, EXF_GETFORCING
228        so xx_gentim2d can be applied to e.g. exf fields in a timely manner.
229    o OpenAD verification experiments:
230      - Include explicitly AUTODIFF_OPTIONS.h, COST_OPTIONS.h, and CTRL_OPTIONS.h
231        in src files (to enable to skip the ECCO_CPPOPTIONS.h);
232        for now, only in pkgs used in OpenAD verification experiments.
233      - Change all except one (halfpipe_streamice) OpenAD experiments to use pkg
234        specific option file (AUTODIFF_OPTIONS.h, COST_OPTIONS.h & CTRL_OPTIONS.h)
235        instead of using ECCO_CPPOPTIONS.h (with all relevant options in it).
236        This applies to both TAF (*/code_ad/) and OpenAD (*/code_oad/) tests.
237    o OpenAD verification tests:
238      - finish removing ALLOW_AUTODIFF_OPENAD (replaced by ALLOW_OPENAD);
239      - finish replacing ALLOW_AUTODIFF_TAMC by ALLOW_AUTODIFF (except for
240        tape/storage which are specific to TAF/TAMC) in pkgs used in OpenAD exp.
241      - leave ALLOW_AUTODIFF_TAMC undef in OpenAD verification tests (*/code_oad/)
242        and remove local copy of "tamc.h" (needed only if ALLOW_AUTODIFF_TAMC).
243    o model/src & generic_advdiff:
244      - change hard-coded loop-range in S/R APPLY_FORCING_T/S to set T & S
245        forcing over 0:sNx+1, 0:sNy=1 (instead of just 1:sNx,1:sNy): Model
246        dynamics requires valid tracer forcing only over tile interior but, for
247        some diagnostics, may need to extend it over 1 point in tile halo region.
248      - in gad_calc_rhs.F, update calls to gmredi_x/ytransport to get valid
249        tendency over i,j_Min,Max range. This allows to simplfy i,j_Min,Max
250        setting in temp/salt/ptracer_integrate.F
251    o pkg/dic:
252      - multiply tracer tendencies by maskInC (if ussing OBCS) before updating
253        gchem tracers: this allows to skip the 2nd call to OBCS_APPLY_PTRACER
254        in gchem_forcing_sep.F
255    o pkg/autodiff & obcs:
256      - add storage of current OB values for U & V (was already done for T & S).
257    
258    checkpoint65c (2014/08/30)
259    o pkg/dic:
260      - take out of dic_atmos.F the initialisation part (corresponding to istate=0)
261        and move it to new S/R DIC_INI_ATMOS ; also simplify the dependencies for
262        AD compilers (but still a Pb with multi-threading and Ajoint dependencies).
263    o verification:
264      - new experiment testing OBCS and DIC pkgs, using params & output from
265        tutorial_global_oce_biogeo but limited to a sub-domain around Drake
266        passage: take OBCS from the last year of a 2 yrs simulation and initial
267        conditions from t=1.yr while keeping the same forcing.
268    o model/src:
269      - when allowFreezing=T, only reset below freezing initial Temp to Tfreezing
270        (at any k) if checkIniTemp is not set to FALSE (default checkIniTemp=T).
271    o pkg/diagnostics (Stats-Diags):
272      - re-write S/R DIAGSTATS_CALC (more similar to TARGET_NEC_SX part) to:
273        a) refine region where stats are computed, excluding where arrhFac=0 ;
274        b) fix missing interior mask (use with OBCS) in 3-D fields statistics;
275        c) extend regional stats over the region edges (for U or V pt location).
276    o pkg/gchem:
277      - add a (2nd) call to OBCS_APPLY_PTRACER in gchem_forcing_sep.F (needed since
278        pkg/dic is currently changing/updating ptracers values beyond the OB).
279    o verification (hs94):
280      - convert Held & Suarez external_forcing.F (from hs94.cs, with Sigma-coords
281        bits) to apply_forcing.F and undef USE_OLD_EXTERNAL_FORCING in experiments
282        hs94.cs-32x32x5 and tutorial_held_suarez_cs ; also use the same version of
283        apply_forcing.F in 2D hs94 (fwd, ad & oad) but keep LatLon hs94 unchanged.
284    o pkg/ptracers:
285      - implement Adams-Bashforth on pTracers (instead of on tracer tendency),
286        switched on by setting PTRACERS_doAB_onGpTr=F (default set to doAB_onGtGs)
287      - change exp4 secondary test (input.nlfs) to test AB on T & S & pTracer
288        with AB-2 code (so that it get tested).
289    o model/src:
290      - allow to apply Adams-Bashforth on Temp & Salt (instead of on gT,gS)
291        with AB-2 code (previously only available with AB-3 code).
292        Also move the code (call to ADAMS_BASHFORTH S/R) form thermodynamics.F
293        to temp/salt_integrate.F (since the 2nd part of gt/sNm1 update is done
294        there, by calling CYCLE_AB_TRACER).
295    o pkg/generic_advdiff:
296      - change Tracer argument (drop bi,bj indices) in S/R GAD_CALC_RHS,
297        GAD_C2_ADV_R, GAD_U3_ADV_R, GAD_C4_ADV_R, GAD_DIFF_R, GAD_BIHARM_R
298        + also in GMREDI_X/Y/RTRANSPORT ; and update corresponding calls in
299        S/R temp/salt/ptracers_integrate.F
300    o model/src & pkg/ptracers:
301      - remove common block variables gT,gS (in DYNVARS.h), except when
302         USE_OLD_EXTERNAL_FORCING is defined; update TAF storage accordingly.
303      - remove common block variable gPtr.
304    o model/src & pkgs:
305      - change gTracer (and/or tracer) argument (drop bi,bj indices) in S/R
306         ADAMS_BASHFORTH(2&3), CYCLE_(AB_)TRACER, FREESURF_RESCALE_G,
307         IMPLDIFF, SOLVE_TRIDIAGONAL & _PENTADIAGONAL, GAD_SOM_ADVECT,
308         GAD_ADVECTION, GAD_CALC_RHS, GAD_IMPLICIT_R, TIMEAVE_CUMUL_DIF_1T
309      + change accordingly all calling S/R.
310      - use local temperature/salinity/ptracer tendency array (without bi,bj)
311        in S/R temp/salt/ptracers_integrate.F
312    o pkg/seaice:
313      - move computation of stress contributions to rhsU/V in s/r seaice_lsr
314        to separate s/r seaice_lsr_rhsu/v in order to be able to re-use code
315      - make u/vIceC local variables if SEAICE_CGRID is defined only to be used
316        in seaice_lsr
317      - seaice_lsr.F: make local 4D arrays UXX, VYY, etc 2D
318        in s/r seaice_lsr_calc_coeffs
319    o pkg/mdsio:
320      - in MDS_READ/WRITE_FIELD, stop if file-name (+prefix) is too long
321        (e.g., > MAX_LEN_MBUF -90 ) or, in INI_MODEL_IO, if mdsioLocalDir is
322        too long (e.g., > MAX_LEN_FNAM/2 )
323    
324    checkpoint65b (2014/08/12)
325    o pkg/matrix:
326      - pass, as argument, updated tracer field to S/R MATRIX_STORE_TENDENCY_EXP
327    o model/src:
328      - fix initialisation of geothermalFile; compile geothermal-flux code in
329        natl_box verification experiment.
330    o model/src & pkg/down_slope:
331      - push the k loop inside S/R TIMESTEP_TRACER (now called outside the k loop).
332      - in dwnslp_apply.F, update tracer tendency instead of the future tracer
333        field and call S/R DWNSLP_APPLY before TIMESTEP_TRACER; this affects
334        results at machine truncation level: update output of experiments
335        global_ocean.90x40x15.dwnslp (FWD) and lab_sea.noseaicedyn (AD).
336    o pkg/diagnostics (Stats-Diags):
337      - do not cumulate the full volume when DIAGNOSTICS_FILL is
338        called with bibjFlg < 0 (no increment of the counter for 2D/3D diag);
339        This fix the mean statistics when DIAGNOSTICS_FILL is called multiple
340        times (but Min,Max and StD are still wrong).
341    o model/src:
342      - add geothermal flux forcing: read in ini_forcing.F as time-constant
343        field "geothermalFlux" applied in S/R APPLY_FORCING_T (apply_forcing.F)
344    o model/src:
345      - move CYCLE_TRACER calls from tracers_correction_step.F to temp/salt/ptracer
346        _integrate.F so that, when leaving S/R THERMODYANMICS, theta,salt and pTrac
347        arrays are already updated while adjustments (filters, conv.adjustment) are
348        still applied later, in S/R TRACERS_CORRECTION_STEP.
349    o model/src:
350      - store in common bloc array "rhoInSitu" the virtual potential temperature
351        anomaly that is used to compute geopotential: this make the atmos code
352        more similar to ocean code which already uses rhoInSitu in calc_phi_hyd.F
353    o pkg/seaice/seaice_lsr.F
354      - rename integer variable ilcall to ipass (that's what it is called
355        in the residual diagnostics
356      - change time stepping for NPSEUDOTIMESTEP > 2 (does not change the
357        default) for improved non-linear convergence of the first few steps
358      - adjust a few comments and add new ones to explain some of the store
359        directives
360    o pkg/generic_advdiff (& ptracers):
361      - re-work the code to check for valid advection scheme and for minimum
362        size of overlap (now stored in local common bloc in gad_advscheme.F)
363    o pkg/seaice: another attempt to make the adjoint work for sea ice dynamics
364      - re-initialize more variables in seaice_lsr: u/vIceC, u/vIceNm1
365      - add an auxilliary variable "bet" and fix store directives and keys in
366        seaice_lsr_tridiagu/v, this seems to do the trick (i.e. more or
367        less exact gradients in my tests); but there are still
368        recomputation warning (although gradients are sort of OK), when
369        SEAICE_LSR_VECTORIZE is not defined, so this flag and
370        SEAICE_LSR_VECTORIZE_ZEBRA are recommended for efficiency.
371      - update verification experiments lab_sea.
372      - change some comments in S/R seaice_calc_viscosities
373    o model/src:
374      - if staggerTimeStep=T, always apply exchange to velocity field in
375        do_stagger_fields_exchanges.F instead of in do_fields_blocking_exchanges.F
376        (independent of using multi-dim advection or not); no effect on FWD run
377        but affects AD results (at machine truncation level): update output of
378        experiment 1D_ocean_ice_column (ad: 12 digits), hs94.1x64x5 (ad,oad: 13.d)
379        and isomip (oad: 12.d).
380    o pkg/generic_advdiff:
381      - stop if doAB_onGtGs is set to FALSE but ignored
382      - refine warning related to stability of tracer time-stepping
383        regarding internal wave dynamics.
384      - setting of AdamsBashforth_T,S when doAB_onGtGs=F: remove condition
385        on staggerTimeStep & implicitIntGravWave (will now get a warning
386        if potentially unstable).
387    o pkg/kl10:
388      - add new pkg "kl10" for mixing due to internal wave breaking, from
389        http://www.sciencedirect.com/science/article/pii/S1463500310000144
390        (contribution from Jody Klymak), tested in verification experiment
391        verification/internal_wave/input.kl10/
392    o isomip experiment:
393      - test pkg/shelfice with Non-Lin Free-Surf in one of the FWD set-up
394        (input.htd) and update the output.
395    o cd_code experiments:
396      - use default cd_code options (#undef CD_CODE_NO_AB_MOMENTUM &
397        #undef CD_CODE_NO_AB_CORIOLIS) in experiments: cfc_example (fwd)
398        global_ocean.90x40x15 (ad & oad) and OpenAD (ad & oad) and
399        update the corresponding output.
400    o pkg/seaice:
401      - reduce the number of include files and store directives in
402        S/R seaice_lsr_tridiagu/v
403      - change the order of loops in one case in S/R seaice_lsr_tridiagv
404        (only for SEAICE_VECTORIZE_LSR_ZEBRA defined), which allows me to
405        get rid off one store directive (a TAF bug?)
406      - add one more instance of ifdef SEAICE_VECTORIZE_LSR_ZEBRA in
407        S/R seaice_lsr_tridiagv to change the loop range for consistency
408      - remove ilcall, m from parameter list of S/R seaice_lsr_tridiagu/v
409      - fix a bug that affects the JFNK solver: replace sNx/y by i/jMax in
410        S/R seaice_lsr_tridiagu/v (requires update of
411        offline_exf_seaice/input.dyn_jfnk)
412    
413    checkpoint65a (2014/07/27)
414    o model/src:
415      - Non-Lin Free-Surf in p/z coords: allows hFacW,S to be larger than
416        surrounding hFacC=1 @ edge of a step with different kSurfC on either side
417        (topo in p-coords, ice-shelf in z-coords); update output of experiments
418        tutorial_global_oce_in_p and isomip (both AD and OpenAD output).
419    o model/src:
420      - collect momentum forcing tendency into local 2-D array (passed as argument
421        to apply_forcing S/R); this simplifies mom. Forcing diagnostics and CD_CODE
422        parts in timestep.F (without CD_CODE_NO_AB_MOMENTUM defined = the default);
423        affects results at machine truncation level (e.g., if using OBCS_SPONGE).
424      - collect T & S forcing tendency into local 2-D array (passed as argument to
425        apply_forcing S/R); add 3-D diagnostics for temp & salt forcing tendency.
426        affects results at machine truncation level (e.g., ocean: if using
427        SHORTWAVE_HEATING ; atmos: if using FrictionHeating or (atm_Rq<>0) moist
428        correction due to vertical advection).
429      - update output of experiments: fizhi-cs-32x32x40 (13 digits),
430        global_ocean.cs32x15 (fwd: icedyn, seaice, thsice, all 3 @ 11d; adm & tml:
431        seaice_dynmix & thsice, fwd grd @ 3 & 8), hs94.1x64x5 (ad grd @ 13),
432        obcs_ctrl (ad & fwd grd @ 12 & 7).
433    o pkg/ptracers & diagnostics:
434      - use ptracers (short) name (instead of long one) to make ptracers diagnostics
435        title (to avoid some unexpected truncation); sort out ptracers diags units.
436      - collect ptracer forcing tendency into local 2-D array (passed as argument
437        to apply_forcing S/R); add 3-D diagnostics for ptracers forcing tendency.
438    
439    checkpoint65 (2014/07/18)
440    o pkg/fizhi:
441      - add parenthesis around fizhi tendencies in fizhi_tendency_apply.F: this
442        affects results at machine truncation level. Update output of experiments
443        fizhi-cs-32x32x40 (12 digits for cg2d) & fizhi-cs-aqualev20 (13 digits).
444    o pkg/seaice: more clean up
445      - rename TAF common block tapes to be more consistent and remove
446        unnecessary duplicates
447      - add store directives to remove more recomputations, but use smaller
448        tapes (and adjust keys) when SEAICE_LSR_ADJOINT_ITER is undefined.
449        The idea behind this flag is to reduce the memory footprint when the
450        adjoint of the LSR is not required. As of now, defining the flag
451        SEAICE_LSR_ADJOINT_ITER increases 4 common block tapes for 2D field by
452        a factor of SOLV_MAX_FIXED (=500 by default in SEAICE_SIZE.h).
453        For experiment offline_exf_seaice, this means on a linux box with gfortran
454        nearly a factor of 10 (but keep in mind there is mostly seaice code in
455        this experiment):
456        > size mitgcmuv_ad
457        text    data        bss     dec        hex
458        5100659 1216  220458952  225560827  d71c8fb
459        5339425 1200 1868783272 1874123897 6fb4dc79 (SEAICE_LSR_ADJOINT_ITER)
460        but only a moderate increase of 36% for global_ocean.cs32x15:
461        text    data        bss     dec        hex
462        6695027 1648 1014578664 1021275339 3cdf6ccb
463        6695203 1648 1382505320 1389202171 52cd8afb (SEAICE_LSR_ADJOINT_ITER)
464      - note: there are still recomputations in global_ocean.cs32x15 and
465        offline_exf_seaice and the gradient agreement changes (gets a
466        little worse) for global_ocean.cs32x15 (-> update output_adm.seaice.txt)
467      - in general, the AD gradients still are wrong
468    o OpenAD
469      - clean up code_oad/ directories somewhat by moving files
470        dontCompile, dontTransform, keepOriginal to OAD_support/
471    o model/src:
472      - using MOM fluxform and Non-Lin Free-Surf with momDissip_In_AB=F
473        (not currently tested): add dissipation terms before NLFS rescaling of
474        tendencies (previously done after).
475    o pkg/diagnostics:
476      - write stats-diags in ascii file with more digits (same as in monitor).
477    o pkg/down_slope:
478      - drop the bi,bj dimension of argument recip_hFac in S/R DWNSLP_APPLY; with
479        NLFS (not tested), use new recip_hFac value in order to conserve tracer.
480    o model/src:
481      - new file "apply_forcing.F" containing all the code previously in
482        external_forcing.F, but with new argument list: pass, as new argument,
483        the current level tendency array to update (instead of a direct update
484        of the common bloc array). Change the corresponding calls.
485      - add CPP option USE_OLD_EXTERNAL_FORCING (default is undef) to use
486        EXTERNAL_FORCING_U,V,T,S subroutines (for backward compatibility).
487    o pkg/seaice/seaice_lsr, a little bit of clean up
488      - rearrange some code blocks, so that now all calculations for
489        setting up the right-hand-sides done within one single block
490        (I find that easier to read and understand)
491      - rearrange freedrift-code to reduce the number of ifdefs
492      - adjust some indentations and comments
493    
494    checkpoint64z (2014/07/10)
495    o model/src and several pkgs:
496      - change argument list of all S/R called from external_forcing.F and
497        called from ptracers_forcing.F (renamed to ptracers_apply_forcing.F)
498        to pass, as argument, the current level tendency array to update
499        (instead of a direct update of the common bloc array).
500      - change also (in the same way) argument list of PTRACERS_APPLY_FORCING;
501      - rename taueddy_external_forcing.f to taueddy_tendency_apply.F
502    o pkg/seaice/seaice_lsr.F
503      - always initialize local arrays in seaice_lsr_tridiagu/v
504      - add more local tapes to seaice_lsr_tridiagu/v
505      - move storing u/vice(:,:,bi,bj) out of seaice_lsr_tridiagu/v, but
506        keep it in bi/bj loop; this seems to be essential
507      - gradients are still wrong but only by 4-7 orders of magnitude
508        instead of 15 orders of magnitude, lab_sea improves a little
509    o pkg/seaice
510      - (pkg/autodiff) remove storing/restoring of seaiceMaskU/V that
511        generates unnecessary code in seaice_lsr_ad
512      - add more store directives in seaice_lsr to avoid unnecessary code
513        in seaice_lsr_ad
514      - exclude some residual computations in seaice_lsr when
515        ALLOW_AUTODIFF_TAMC is defined in order to avoid unnecessary code
516        in seaice_lsr_ad
517      - add more storing, a new tape (model/src/the_main_loop.F) and
518        another key for SEAICE_LSR_VECTORIZE_ZEBRA (the local keys ilockey
519        and klockey should be checked by a specialist)
520      - modify ( define SEAICE_VECTORIZE_LSR and SEAICE_LSR_ADJOINT_ITER )
521        and update lab_sea after previous changes in pkg/seaice below
522    o pkg/autodiff:
523      - introduce useSmoothCorrel2DinAdMode, SEAICEapproxLevInAd, and
524        viscFacInAd : run time parameters allowing for adjoint switches
525        note : logic for useSmoothCorrel2DinAdMode is in ctrl_readparms.F
526    o pkg/ecco:
527      - introduce cost_gencost_boxmean.F that computes a box mean
528        temperature (for use in adjoint sensitivity studies).
529    o model/src/set_defaults.F : initialize viscFacAdj to 1.
530    o pkg/mom_common/mom_calc_visc.F:
531      - ifdef ALLOW_AUTODIFF then include viscFacAdj factor.
532    o pkg/seaice/seaice_summary.F:
533      - statement for SEAICEadjMODE now in autodiff_readparms.F
534    o pkg/seaice:
535      - remove some store directives and add new ones in an effort to get
536        finally rid off the recomputation warnings. This is successful
537        when SEAICE_VECTORIZE_LSR ***and*** SEAICE_LSR_ADJOINT_ITER are
538        defined (i.e. no extensive recomputation warnings left), but there
539        are still too many recomputations on the solver iteration level
540      - define SEAICE_VECTORISZE_LSR in offline_exf_seaice/code_ad/SEAICE_OPTIONS.h
541      - move definition of MPSEUDOTIMESTEPS into TAMC-block in
542        SEAICE_SIZE.h
543      - add a store directive in S/R seaice_calc_viscosities
544    o pkg/seaice (ITD code):
545      - fix definition of Hlimit for multi-threaded case
546      - use double precision arithmetic to compute Hlimit: this affects results;
547        update output of experiment seaice_itd.
548    o replace content of verification/seaice_itd
549      - instead of a 1D column use the configuration of offline_exf_seaice
550        to test the ice thickness distribution code with ridging
551      - this is a first shot at this experiment
552      - change of some defaults of ridging parameters SEAICEhStar (from
553        100 to 25) and SEAICEmuRidging (from 5 to 3) in seaice_readparms.F
554        and lot of new comments.
555    
556    checkpoint64y (2014/06/20)
557    o pkg/seaice/seaice_reg_ridge.F:
558      - modify the regularization of very small volumes of ice; only check
559        total volume HEFF, and do not apply correction to individual ice
560        classes because that leads to funny patterns in the heat and fw-fluxes
561        into the ocean. Adjust seaice_itd/results/output.txt
562      - replace nITD by SEAICE_multDim in loop-ranges
563    o pkg/exf:
564      - add code to process the case field period = -12. with UV interpolation.
565      - move debug print (formerly active when exf_verbose=T) from EXF_getFFieldRec
566        into S/R that calls it (i.e., exf_set_gen.F, exf_set_uv.F & obcs_exf_load.F)
567    o verification/global_with_exf:
568      - switch all fields period to -12. (was previously untested) in input/data.exf
569        (but keep secondary test ".yearly" unchanged); update the reference output.
570    o pkg/cal:
571      - new calendar type "noLeapYear" for 365 days calendar without any leap year.
572    o pkg/exf:
573      - new integer parameter "exf_debugLev" (default set to main model debugLevel)
574        to replace logical switch "exf_verbose"
575      - report in STDOUT when loading a new record (if exf_debugLev >= 3)
576    o pkg/sbo:
577      - update from Katherine Quinn: evaluate mass directly from density and SSH
578        (budget using Finite Volume method) instead of from bottom pressure.
579      - allow testreport to collect few selected SBO output ; tested in exp.
580        global_ocean.90x40x15 (after updating the results, to include SBO output).
581      - fix some multi-threading issues (in output part).
582    o model/src & most packages:
583      - always call {PKG}_READPARMS even if corresponding use{PKG}=F;
584      - in {PKG}_READPARMS, in case use{PKG}=F: add a call to new S/R
585        PACKAGES_UNUSED_MSG to print a weak warning when parameter file
586        "data.{pkg}" exist ; and leave the S/R (return) just after.
587      - more standard LAND pkg interface (land_init_fixed.F, land_check.F).
588        + call LAND_READPARMS from packages_readparms.F
589    o pkg/seaice:
590      - remove code that resets useThSice in S/R seaice_readparms and
591        replace it by a warning in S/R seaice_check
592      - remove parameter MULTDIM, replace with nITD and runtime
593        parameter SEAICE_multDim (still hard-wired to nITD if
594        SEAICE_ITD is defined)
595    
596    checkpoint64x (2014/05/24)
597    o verification/lab_sea:
598      - update adjoint and TLM output following changes to pkg/salt_plume
599      - un-do the update after putting back local recip_Cp in few places.
600    o pkg/salt_plume: modifications by An Nguyen:
601      - add capability to do brine rejection (salt-plume) as function of
602        volume+tracers (instead of only salinity tracer).
603      - conserve volume by exchanging volume from each kLev to above to
604        accommodate in-coming brine volume
605      - store surface and klev exchanged fraction + volume in 4 new 3-d arrays
606      - switch KPP surf buoyancy due to brine forcing to 3-d
607        (3 more 3-d arrays, 2 for SPforcing[T,S], 1 for boplume)
608      - add salt_plume_volfrac, salt_plume_apply, salt_plume_tendency_apply_t
609      - unrelatedly, also add ad-hoc capability to vary salt_plume scheme
610        in East/West Arctic.
611    o pkg/sbo:
612      - incorporate modifications from Katherine Quinn to enable the use of sbo
613        pkg in ECCO-v4 set-up ; remove SBO-TimeAve output ; add monitor-like
614        output for future testreport verification (unfinished).
615    o pkg/atm_phys:
616      - change diagnostics (AtPh_Trf & AtPh_Qrf) of DARGAN_BETTSMILLER S/R:
617        skip the reseting of t_ref & q_ref to initial t & q ; this preserve the
618        output of S/R CAPECALCNEW (Parcel temp & q) for diagnostics.
619    o pkg/seaice
620      seaice_calc_ice_strength.F: modify expression to avoid divisions
621        (affects truncation)
622      seaice_do_ridging.F: clean up the insectarium
623      - fix a bug that was compensated by areaScaling (-> remove areaScaling code)
624      - added SEAICEsnowFracRidge to redistributed snow (2nd bug)
625      - set closing/openingRate to zero where no extra iteration is need (3rd bug)
626      - add some debugging information and error messages (warnings)
627    o model/src: modifications relatd to atmosphere p*:
628      - Switch to more accurate p* coordinate slope term (calc_grad_phi_hyd.F)
629      - With p* or Sigma-P, use constant reference Pot.Temp (thetaConst) instead
630        of vertical profile tRef in geopotential background and anomaly.
631      - Acount for true p* correction in theta <-> T conversion in pkg/aim_v23
632        and pkg/atm_phys.
633      - Update FWD output of experiments: aim.5l_cs (x2), fizhi-cs-32x32x40,
634        fizhi-cs-aqualev20, fizhi-gridalt-hs, tutorial_held_suarez_cs, cpl_aim+ocn.
635    o pkg/seaice: fix a bug in seaice_prepare_ridging.F, forgot a sqrt
636    o pkg/ptracers: compute ptracer source/sink due to linear free surface.
637        not used right now, but can be used in BGC packages to fix conservation.
638    o pkg/dic, pkg/gchem: move tracer_meanarea to gchem, so it can be used by
639        other packages too.
640    o pkg/seaice/seaice_calc_ice_strength.F: replace SEAICE_rhoSnow by
641        SEAICE_rhoIce in the Rothrock (1975)-type strength calculations (bug fix)
642    o model/src:
643      - since we have several heat capacity (even in model/src), define "recip_Cp"
644        as local variable (no longer in common block) to avoid any confusion.
645      - add thetaConst in PARAMS.h (to be used with pStar or sigma-P coords).
646    o pkg/exf:
647      - from Jeff Scott: add option (#define EXF_CALC_ATMRHO) to calculate local
648        air density as function of air Temp, Humidity and atm pressure.
649    
650    checkpoint64w (2014/05/02)
651    o verification:
652      - update output_adm.txt files for experiment global_ocean.cs32x15 (seaice &
653        seaice_dynmix) and lab_sea (primary test & noseaicedyn): moving/changing
654        code from seaice_growth.F & seaice_advdiff.F to new ridging routines
655        seaice_reg_ridge.F seaice_do_ridging.F affects AD gradient
656        (down to 8-7 matching digits for global_ocean and 5-6 for lab_sea).
657    o model/src: for atmosphere in p* coords:
658      - store factor rStarFacC**atm_kappa (= pStarFacK) in common block
659      - implement more accurate p* coordinate slope term (in calc_grad_phi_hyd.F),
660        but not yet activated.
661    o pkg/seaice: fix restart problem for ITD with new ice strength parameterisation:
662      - move computation of opnWtrFrac = 1-AREA to before computing ice strength
663      - this changes the results (but not for any verification experiment, because
664        none tests this), but avoids having an extra field in the restart files
665    o pkg/seaice: remove global variable TICE (not needed)
666      - replace by TICES or local variable where necessary (cost_seaice_test,
667        seaice_diagnostics_state)
668      - move copying TICE to TICES from seaice_check_pickup to seaice_read_pickup
669      - use specific read/write routines for reading and writing individual leves
670        of a multilevel field
671    o pkg/ctrl & model/inc:
672      - move additional anomaly fields of control vars (related to options:
673         ALLOW_KAPGM_CONTROL, ALLOW_KAPREDI_CONTROL and ALLOW_BOTTOMDRAG_CONTROL)
674        from DYNVARS.h into new header file: CTRL_FIELDS.h
675    o pkg/seaice: some small modifications to the ridging code
676      - make fw2ObyRidge a global variable and add the freshwater flux to
677        seaice_growth
678      - pass actual thickness from seaice_prepare_ridging, so that it is
679        computed only in one place and compute it in the same way as in
680        seaice_growth
681      - initialise more fields in seaice_do_ridging that where cause floating
682        point exceptions over land
683    o pkg/seaice: preparations for ridging code and first real ridging code
684      - move most of "PART 1" of S/R seaice_growth into a new and separate
685        S/R seaice_reg_ridge that will both regularize the state variable after
686        advection call the actual ridging routine;
687      - requires to make 5 fields global fields: d_HEFFbyNEG,d_HSNWbyNEG,
688        d_AREAbyRLX,d_HEFFbyRLX,saltFluxAdjust;
689      - remove ridging code from seaice_advdiff
690      - clean up remaining part 1 of seaice_growth in an attempt to make it
691        more readable (this is probably subjective)
692      - call seaice_itd_redist once in the initialisation phase to have the initial
693        conditions in the correct category
694      - finally: add new ridging routine for ITD code
695    
696    checkpoint64v (2014/04/11)
697    o pkg/ecco:
698      - add runtime parameters mdt[start,end]date[1,2]
699      - rename variable "tpmean" as "mdt" and "topexmeanfile" as "mdtdatfile"
700    o pkg/seaice:
701      - make deltaC a global variable, so that it can be used in ridging code
702      - first step towards ridging: introduce new routines that compute
703        ice strength based on ridging parameters
704      - add diagnostic for HSNOWITD
705      - add opnWtrFrac as a global variable (required for ridging scheme)
706    o pkg/salt_plume + pkg/seaice/seaice_growth.F
707      - add SALT_PLUME_IN_LEADS flag to activate pkg/salt_plume only when ice
708        AREA exceeds a threshold (code contributed by I.Fenty in 2011)
709    o verification/hs94.1x64x5:
710      - leave ALLOW_AUTODIFF_TAMC undefined in code_oad/AUTODIFF_OPTIONS.h
711      - do not use ECCO_CPPOPTIONS.h anymore for TAF & OpenAD Adjoint tests.
712    o autodiff:
713      - Start to include explicitly AUTODIFF_OPTIONS.h, COST_OPTIONS.h,
714        and CTRL_OPTIONS.h in src files (to enable to skip the ECCO_CPPOPTIONS.h)
715        For now, only in pkgs used in verification/hs94.1x64x5.
716      - Replace ALLOW_AUTODIFF_TAMC by ALLOW_AUTODIFF (except for tape/storage
717        which are specific to TAF/TAMC).
718      - Replace ALLOW_AUTODIFF_OPENAD by ALLOW_OPENAD:
719        since ALLOW_OPENAD is defined in PACKAGES_CONFIG.h (any time pkg/openad
720        is compiled), this simplifies/reduces which *_OPTIONS.h file to include.
721      - OpenAD: change Makefile to generate the appropriate AD_CONFIG.h when
722        building mitgcmuv_ad (make adAll).
723    o pkg/ecco:
724      - cost_gencost_seaicev4.F:
725         reformulate proxy cost as function of sst and local param SEAICE_freeze
726         change cost names from siv4-[sst,vol] to siv4-[deconc,exconc]
727      - add stop statement if old names siv4-[sst,vol] are used
728      - add snapshots + cost reports for atmospheric longwave
729      - remove factor 0.1 in front of wtau[u,v]
730      - replace never used flag ALLOW_TMI_COST_CONTRIBUTION with
731         ALLOW_TMI_SST_COST_CONTRIBUTION
732    o pkg/atm_phys:
733      - add some diagnostics for Short-wave and for convection S/R.
734    o pkg/seaice/seaice_growth:
735      - fix a bug in the lateral melt parameterization for SEAICE_ITD
736        in seaice_growth; tempFrz needs to be computed inside the i/j-loop
737      - rearrange loop order for better vector code in the same code block
738      - rewrite the floeDiameter formula to have fewer divisions
739      -  (miraculously) none of this changes the results of seaice_itd
740    o pkg/smooth:
741      - move param smooth2Ddiffnbt to pkg/ecco
742    o pkg/salt_plume:
743      - salt_plume_frac.F:
744         clean up local param names
745         reformulate (1-frac) to frac; original 1-frac was based on swfrac code
746    o pkg/rw:
747      - add RS version of S/R READ_MFLDS_LEV.
748    o pkg/streamice:
749      - fix the restart test by writing/reading pickup_streamice files.
750    o pkg/seaice:
751      - refine checks for jfnk-related parameters
752      - comment out if statement with SEAICEuseIMEX parameter as long as there
753        is no IMEX code to avoid confusion and surprises
754    
755    checkpoint64u (2014/03/07)
756    o verification/MLAdjust:
757      - rename secondary test suffix:
758         1.leith  -> A4FlxF  + switch to flux-form & add side-drag
759         0.leithD -> AhFlxF  + switch to flux-form
760         0.smag   -> AhVrDv  (use Vorticity-Div. visc form) + add side-drag
761         0.leith  -> AhStTn  (use Strain-Tension visc form) + add side-drag
762    o pkg/mom_vecinv:
763      - remove unused arguments from S/R MOM_VI_HDISSIP & MOM_HDISSIP (as it used
764        to be before mom_calc_visc.F)
765      - skip the call to MOM_CALC_TENSION & MOM_CALC_STRAIN if not needed.
766      - add 2nd copy of vort3 & strain that knows about lateral BC (free/no slip):
767        this is simpler for the adjoint and for diagnostics.
768    o model/src + pkg/momentum:
769      - add input files for  2-D additional Western and Southern cell-edge wall
770         (e.g., to add "thin-wall" where it is =1).
771      - fix sideDrag option for thin-walls with Non-Lin Free-Surf
772        using 2nd hFacZ that is computed from initial (fix domain) hFac
773      - known limitations of thin wall implementation: not yet coded for sigma
774        coords; not working with CD-scheme neither.
775    o pkg/seaice:
776      - rename recently introduced parameters from (wrong name) AB to
777        BDF (backward difference time discretisation)
778      - retire runtime parameters SEAICEuseAB2, SEAICE_abEps
779    o tools/adjoint_options:
780      - remove setting of "OPENAD=true" (now set by command line "genmake2 -oad")
781    
782    checkpoint64t (2014/02/01)
783    o pkg/ecco
784      - add compile flag ALLOW_GENCOST_TIMEVARY_WEIGHT in ECCO_OPTIONS.h and
785        runtime logical flag gencost_timevaryweight to read daily sea-ice sigma
786      - replace hard-coded record number and period which only work for monthly
787        with read-in runtime param that works for other periods (month,day,year)
788    o pkg/thsice
789      - corrected store directive fixes thsice adjoint gradient checks
790    o genmake2 & testreport:
791      - add genmake2 option "-oad" to generate a Makefile for OpenAD built and
792        in this case, use tools/adjoint_options/adjoint_oad as default AD optfile.
793        Update testreport accordingly. No need to set "export OPENAD=true"
794        in adjoint_options/adjoint_oad anymore (will be removed later).
795    o pkg/shelfice:
796      - put T & S shelfice forcing into model surfaceForcing_T,_S (for now,
797        only if SHELFICEboundaryLayer=F); Change model/src/external_forcing.F
798        so that surface forcing applies to k=kSurf if using pkg/shelfice.
799    o pkg/ctrl, pkg/grdchk, pkg/ecco:
800      - Changes to make GENARR more modular (i.e. invisible if not used)
801    o model/src/temp_integrate.F and salt_integrate.F
802      - re-include store directives that were removed on Dec 27th.
803    o model/src/external_forcing_surf.F
804      - add storage directives for EmPmR and PmEpR to avoid recomputation of
805        seaice_model in the adjoint that is problematic when seaice_model is
806        turned off in the adjoint. The resolved issue dated back to July when
807        EXTERNAL_FORCING_SURF call was moved.
808        Update global_ocean.cs32x15/*/output_adm.seaice_dynmix.txt accordingly.
809    o pkg/exf/exf_check.F
810      - fix a small bug again (originally found by Wentao Liu, now found again)
811      - streamline error output
812    o pkg/streamice and aim_v23:
813      - replace a few "_EXCH_XY_RL (" with "_EXCH_XY_RL(", so that
814        Apple's /usr/bin/cpp knows what to do:
815        Apple LLVM version 5.0 (clang-500.2.79) (based on LLVM 3.3svn)
816        Target: x86_64-apple-darwin13.0.0
817    
818    checkpoint64s (2014/01/05)
819    o tools/adjoint_options:
820      - switch to fastopt.net TAF server (instead of default fastopt.de) for
821        AD optfiles adjoint_diva & adjoint_f95 (similar to adjoint_default).
822    o model/src:
823      - remove some unnecessary TAF storage directives in forward_step.F and
824        in dynamics.F (note: not always removed by TAF, e.g., double storage
825        of kappaRU,kappaRV in former version of dynamics.F).
826    o model/src & pkg/ptracers:
827      - call directly GAD_IMPLICIT_R & IMPLDIFF + DWNSLP_APPLY from temp_integrate.F
828        salt_integrate.F and ptracers_integrate.F (instead of from thermodynamics.F)
829        and remove ptracers_dwnslp_apply.F & ptracers_implicit.F
830      - call MATRIX_STORE_TENDENCY_EXP for each tracer (in ptracers_integrate.F)
831      - add fZon & fMer as output argument of S/R GAD_CALC_RHS.
832      - update TAF AD-output of experiments global_ocean.90x40x15 (13 for AD-grad).
833    o useSingleCpuInput separates single-CPU input from single-CPU output;
834        for now only implemented for in exf_interp_read.F
835    o verification/advect_xy:
836      - fix missing EXCH call in local version of ini_salt.F and update output.
837    o momentum diagnostics:
838      - fix which deltaT is used in Total-Tendency diagnostics.
839      - fix typo in diagnostics for momentum tendency from AB.
840    o pkg/seaice/seaice_lsr.F: fix an initialisation bug for the
841        SEAICE_VECTORIZE_LSR_ZEBRA option that lead to NaNs on a NEC-SX8
842    
843    checkpoint64r (2013/12/08)
844    o verification/*/results:
845      - Update reference output of experiments that were passing with just 13 digits
846         (make it easier to detect future changes in results)
847    o model/src & pkg/ptracers:
848      - move calls to GAD_ADVECTION (Multi-Dim advection) from thermodynamics.F to
849        inside temp_integrate.F and salt_integrate.F and from ptracers_advection.F
850        to inside ptracers_integrate.F ; remove ptracers_advection.F
851    o coupling interface pkgs:
852        [atm_compon_interf, ocn_compon_interf & atm_ocn_coupler]
853      - change the config check to test the agreement of Ocean Depth
854        with ATM land/sea mask (instead of ATM orography);
855      - send to coupler the number of coupler time-steps to do for this run:
856        this allows to check for consistency and don't need anymore to be
857        specified in parameter file "data";
858      in coupler:
859      - check consistency of RunOff map versus Ocean Depth and ATM land/sea mask.
860      - improve report to log-file of config setting (pass log-file unit to few S/R)
861    o pkg/compon_communic:
862      - add coupling send/receive for non-tiled integer vector;
863      - add S/R to check and stop if any proc has an error (similar to
864        eesupp/src/stop_if_error.F but single thread and across Comm_World).
865    o pkg/exch2:
866      - in exch2*_get_rx[1,2]: use new list "W2_tileIndex" to replace search
867        through list of all tiles my proc owns.
868    o model/src:
869      - AUTODIFF only: in calc_adv_flow.F, recompute rTransKp (instead of copying
870        from rTrans) to simplify dependencies (no need to store rTrans anymore in
871        calling S/R); this affects AD results at machine truncation level:
872        update AD-output (TAF) of experiments: 1D_ocean_ice_column,
873        bottom_ctrl_5x5 & obcs_ctrl (12 digits for AD grad, same FWD grad).
874    o tools/build_options:
875      - simplify Warnings options (-ieee & -devel cases) in linux_amd64_gfortran
876    o coupling interface pkgs:
877        [compon_communic, atm_compon_interf & ocn_compon_interf]
878      - move declaration of local array "ibuf" out of header file "CPLR_SIG.h"
879        to each S/R that needs it; remove un-used variables.
880      - change component tile registration (cpl_register.F in both compon_interf
881        and mitcomponent_tile_register.F) to pass the full list of tiles
882        information (including bi,bj) in 1 vector (instead of in a bi,bj matrix).
883      - with pkg/exch2: adopt the same convention used for I/O to define mapping
884        towards coupler global array (unless W2_useE2ioLayOut=F):
885         a) can now use different tiling between atm & ocn comp.
886         b) no needs to modify the run-Off map when changing tiling (was needed
887            even if using the same tiling between atm & ocn).
888         c) will allow to run with blank-tiles in 1 component (e.g., for ocean
889            full land tiles); not yet tested.
890      - check for valid mapping from comp. tile to coupler global array
891      - improve report of tile registration results to log file.
892    o pkg/exch2:
893      - in eesupp/src/eeboot.F: move call to W2_EEBOOT before Coupler
894        tile-registration (CPL_REGISTER);
895      - activate (un-comment) definition and setting of "W2_tileIndex" list to
896        store the local bi,bj indices of each tile;
897      - also print bi,bj in local report to log file;
898      - fix pkg/debug/debug_cs_corner_uv.F for the case nSy > 1 (left from
899        Jun 2009 modif of pkg/exch2).
900    o testing on baudelaire:
901      - run 2 tests at a time: no significant slow down (since enough cpu) and
902        get the full set of test done earlier
903      - switch the ifort test to "-devel" ; run the OpenAD test everyday.
904    o model/src/thermodynamics.F and routines called from it:
905      - pkg/gmredi: gmredi_residual_flow.F (replacing gmredi_calc_uvflow.F &
906        gmredi_calc_wflow.F) to update eulerian velocity (input) into residual
907        velocity (outp) by adding bolus velocity.
908      - model/src: calc_adv_flow.F (replacing calc_common_factors.F) to compute
909        mass transport from velocity + lateral grid cell area
910      - rename calc_gt.F to temp_integrate.F (includes call to TIMESTEP_TRACER)
911      - rename calc_gs.F to salt_integrate.F (includes call to TIMESTEP_TRACER)
912     in thermodynamics.F
913      - remove k from thermodynamics.F and move it to temp_integrate.F
914        salt_integrate.F and ptracers_integrate.F (now done inside the tracer
915        loop).
916      - compute locally (in thermodynamics.F) 3-D velocity field that is used to
917        advect tracers; pass it as argument to GAD_ADVECTION, GAD_SOM_ADVECT,
918        PTRACERS_ADVECTION, TEMP_INTEGRATE, SALT_INTEGRATE, PTRACERS_INTEGRATE,
919        GAD_IMPLICIT_R and PTRACERS_IMPLICIT
920      - update AD-output (TAF & OAD) of experiments: 1D_ocean_ice_column,
921        global_ocean.90x40x15, tutorial_global_oce_biogeo and
922        tutorial_tracer_adjsens (+ TLM output).
923    o tools/OAD_support and (verification/*/) code_oad:
924      - OAD_support/cb2mGetModules.csh: add PACKAGES_CONFIG.h in header file to
925        module conversion ; remove unneeded CPP_EEOPTIONS.h.
926      - code_oad/CPP_OPTIONS.h: remove PACKAGES_CONFIG.h and use a more standard
927        version (closer to model/inc/CPP_OPTIONS.h).
928    o model/src:
929      - remove parameter "useOldFreezing" from PARAMS.h and push it to the
930        retired list of parameters (routine FREEZE has been replace by surface
931        freezing (10.yrs ago) and by pkg/frazil (interior freezing).
932    o pkg/gmredi:
933      - add option (GM_CALC_TRANSP_FROM_VEL) to compute transport directly from
934        velocity (same scheme but affects machine truncation) for GM_AdvForm.
935      - update output of FWD experiments: front_relax.bvp,
936        global_ocean.90x40x15.dwnslp, global_ocean.cs32x15 and ideal_2D_oce.
937    
938    checkpoint64q (2013/11/17)
939    o verification:
940      - generate new output on baudelaire (gfortran, -ieee) for OpenAD experiments
941        tutorial_global_oce_biogeo and global_ocean.90x40x15.
942      - generate new output (growth & melt) for seaice_itd experiment after
943        updating the input pickup_seaice files (previously wrong).
944    o pkg/cost:
945      - define a "final cost function" for each tile, and use GLOBAL_SUM_TILE_RL
946        (instead of _GLOBAL_SUM_RL) to get the final cost from all procs & threads:
947        o this fixes global-sum value if multi-threads (since GLOBAL_SUM_RL
948          cannot be applied to var in common block).
949        o allows to get results independent of tile-per-proc setting (if using
950          slower GLOBAL_SUM_SEND_RECV option).
951      - update accordingly: seaice_cost_final.F, shelfice_cost_final.F,
952        thsice_cost_final.F and ecco_cost_final.F (this one affects lab_sea
953        forward gradients: update output).
954      - update */code_oad/externalDummies.F by adding dummy GLOBAL_SUM_TILE_RL
955        S/R and, for most exp., also comment out GLOBAL_SUM_R8.
956    o pkg/mom_common:
957      - move to pkg/mom_common and model/src (previously in tutorial_deep_convection
958        code) 2nd version of isotropic 3-D Smagorinsky code interface: strain and
959        viscosity are locally declared in dynmics.F and pass as argument to CALC_GW;
960        ensure that all field value that are used are set.
961    o tutorial_deep_convection (smag3d):
962      - add missing scaling in mom_calc_smag_3d.F;
963      - set smag3D_coeff in input.smag3d such that results do not change.
964    o pkg/dic:
965      - change dic_cost.F to compute cost on each tile first and then apply
966        GLOBAL_SUM_TILE_RL: this affects forward gradient of AD experiments
967        tutorial_dic_adjoffline & tutorial_global_oce_biogeo; update output.
968      - remove kLev argument and use GLOBAL_SUM_TILE_RL in tracer_meanarea.
969    o eesupp/src & pkg/mdsio:
970      - remove gather/scatter_vector.F (from eesupp) and mdsio_read/writevector.F
971        (from pkg/mdsio) since they are no longer used for tape IO.
972      - move simple C subroutine "setdir.c" from pkg/compon_communic to eesupp/src
973        (+ keep a copy in pkg/atm_ocn_coupler).
974    o verification/isomip:
975      - split domain in 8 squared tiles (instead of just 2) for FWD, AD & OAD tests.
976    o tools/build_options:
977      - optfile linux_amd64_ifort11, fast (no ieee) case:
978        to get a working restart for all experiments, add "-fp-model source"
979        to FOPTIM (also remove "-opt-streaming-stores auto" <- this is the default).
980    
981    checkpoint64p (2013/10/20)
982    o pkg/autodiff:
983      - adread_adwrite.F: when type and length do not match ALLOW_AUTODIFF_WHTAPEIO
984        criteria, return to simple (default) tape IO format.
985    o pkg/mdsio (+ eesupp/src):
986      - rewrite/simplify tape-IO S/R (new S/R MDS_READ/WRITE_TAPE replace
987        previous MDSREAD/WRITEVECTOR) with 2 array argument from each type (R4/R8);
988      - fix globalFile and singleCpuIO options using simpler global mapping.
989      - new pairs of scatter/gather vector S/R (one for each type, generated from
990        template) corresponding to simpler global mapping.
991      - adread_write.F: switch to new S/R (but leave old calls commented) and write
992        to globalFile when parameter globalFiles is set to True.
993      - switch on useSingleCpuIO in AD experiments: global_ocean.90x40x15 & isomip.
994    o pkg/autodiff:
995      - adread_adwrite.F: add a hack for RS arrays (when RS=real*4);
996        with ALLOW_AUTODIFF_WHTAPEIO defined, since corresponding (real*4) is
997        missing, just add a STOP if array type do not match.
998    o pkg/exf:
999      - to allow to use seaice-fraction from pkg/exf in other pkgs than pkg/seaice:
1000         rename CPP option EXF_ALLOW_SEAICE_RELAX to EXF_SEAICE_FRACTION
1001         and rename array obsSIce to exf_iceFraction.
1002    o tutorial_deep_convection:
1003      - add 1rst version of isotropic 3-D Smagorinsky code (from Louis-Philippe),
1004        for now all in this exp. code dir.
1005      - add secondary test using Smag-3D viscosity (keep very low backgroud visc for
1006        testing) and flux-limter advection scheme for Temp. (no explicit diffusion).
1007    o eesupp/src:
1008      - added SINGLE_DISK_IO option because reading of parameter files on
1009        very large number of processors did not work with existing set-up
1010    
1011    checkpoint64o (2013/09/25)
1012    o pkg/atm_phys & atm_compon_interf:
1013      - allows for coupling of gray-atmosphere (atm_phys) with ocean.
1014    o tools/build_options:
1015      - switch from "-fPIC" to "-mcmodel=medium" in optfiles: linux_amd64_gfortran
1016        & linux_amd64_ifort11 and in linux_amd64_g77 & linux_amd64_open64 also
1017        remove CPP setting (was identical to genmake2 default).
1018    o pkg/gmredi & model/src: Some updating and work done on the residual model.
1019      - created new file model/src/calc_eddy_stress.F to calculate the eddy stress.
1020      - fixed up the calculation of the eddy stress and how it is added to the
1021        external forcing via taueddy_external_forcing.F
1022      - at the moment, it is very experimental and only works with the variable eddy
1023        diffusivity calculated in gmredi_k3d.F
1024    o pkg/seaice/seaice_check.F: add a check to catch the case of specifying
1025        lw/swfluxfile instead of lw/swdownfile in data.exf together with pkg/seaice
1026    o testreport (& tools/do_tst_2+2):
1027      - for MPI test, set default COMMAND to 'mpirun -v -np TR_NPROC ./{executable}'
1028    o tools/build_options: linux_amd64_gfortran & linux_amd64_ifort11:
1029      - remove CPP='cpp -traditional -P' (this is genmake2 default)
1030      - add switch (for big setups) to use 'medium' memory-model (but leave it
1031        commented out for now). Note: needed with FC 19 to compile big setups.
1032    o pkg/atm_compon_interf:
1033      - regroup per field origin (model & pkgs) the coupling storage routines
1034         (which accumalate in time each coupling field)
1035      - move bi,bj loops inside atm_store_my_data.F and store also wind-stress;
1036        update accordingly + simplify aim_do_physics.F
1037    
1038    checkpoint64n (2013/08/26)
1039    o pkg/bbl:
1040      - update formulation to reduce dispersion of tracer properties in bbl
1041      - replaced horizontal and vertical transport parameters with velocities
1042      - changes results for verification/global_with_exf.yearly
1043    o verification/halfpipe_streamice:
1044      - change to matrix construction; update both Fwd & AD output.
1045    o verification/tutorial_tracer_adjsens:
1046      - OpenAD test: switch to vector-invariant momentum since fluxform with
1047        rStar causes problems with OpenAD; update output.
1048    o tools:
1049      - genmake2: define a common prefix for all temp-file names ; move them
1050        to local /tmp disk (but would be easy to move them back);
1051      - xmakedepend: apply the same switch for temp-files.
1052    o pkg/offline:
1053      - changes for use with rStar (NLFS): assume that we continue to provide
1054        UVELMASS/hFacW_ini & VVELMASS/hFacS_ini (hFacWi,S_ini as written in grid
1055        output files) and apply r* scaling at each time-step (function of the time
1056        varying Eta field); use normal pickup files (needed for restart with NLFS).
1057    o adjoint with OpenAD:
1058      - move OpenAD-specific files from verification/OpenAD/code_oad_all to a new
1059        package openad.  This package has to be compiled for all runs with OpenAD
1060        instead of specifying code_oad_all as a modification directory.
1061      - link the fortran templates from tools/OAD_support to the build directory
1062        for preprocessing to avoid conflicts between different setups compiled
1063        simultaneously and simplify cleanup.
1064    o pkg/exf:
1065      - in exf_getforcing.F: comment out most of the EXCH calls (fields used by
1066        main model or other pkgs are exchanged in EXF_MAPFIELDS).
1067    o model/src:
1068      - do_stagger_fields_exchanges.F: skip EXCH calls when using pkg/offline
1069        (similar to do_fields_blocking_exchanges.F).
1070    o tools/genmake2:
1071      - remove TAF output src code just before calling staf (when not doing a fresh
1072        built, will stop if things go wrong with staf).
1073      - fix target "adobj" (left from TAF version-2 transition)
1074    o pkg/diagnostics:
1075      - add a parameter to track the status of pkg/diagnostics activation;
1076        this replace/extend the use of logical param "settingDiags" (to check
1077        when adding diag to the list) to also check any DIAGNOSTICS_[]FILL* call.
1078        New S/R to print error message and stop when pkgStatus is not right.
1079      - to try: add a warning when "data.diagnostics" exist but useDiagnostics=F.
1080    
1081    checkpoint64m (2013/08/13)
1082    o model/inc:
1083      - move FCORI_MACROS.h from PARAMS(_MACROS).h to GRID_MACROS.h (left from
1084        8 yrs ago modif when Coriolis arrays were moved from PARAMS.h to GRID.h)
1085    o pkg/kpp & aim_v23:
1086      - only call DIAGNOSTICS_FILL when useDiagnostics=TRUE.
1087    o pkg/seaice:
1088      - restore (last time on 2011/12/24) ability to compile pkg/seaice with
1089        undefined pkg/exf ALLOW_ATM_TEMP or ALLOW_RUNOFF CPP-options.
1090      - only call DIAGNOSTICS_FILL when useDiagnostics=TRUE.
1091    o eesupp/src:
1092      - fix check for overlap-size argument (myOLn.GT.MAX_OLY_EXCH)
1093        in exch1_rx[_ad].template (thanks to Francois Lefeuvre report).
1094    o switch to TAF version-2:
1095      - add flow directives to "freeze" naming convention for ad-routines that
1096        are used in I/O routines of adjoint state and associated common blocks
1097        that are used in adcommon.h (backward compatible with version-1)
1098      - update all ad-optfiles (in tools/adjoint_options + few local to some
1099        verification exp) to switch to latest TAF version (currently 2.5.5);
1100        merge "*_mpi" adoptfiles into the corresponding non-mpi (but commented
1101        out except for diva).
1102      - the major change with TAF version-2 is that both the differentiated
1103        routines and the forward routines (new) are returned as part of the TAF
1104        output source code. Update genmake2 accordingly.
1105      - new output for AD experiment tutorial_global_oce_biogeo (better AD gradient
1106        with version-2 when compared to TLM or FWD gradient); other experiments
1107        output show minor changes (machine truncation level); update the few AD &
1108        TLM output with 12 matching digits only (some prior to version-2 switch).
1109    
1110    checkpoint64l (2013/08/05)
1111    o model/src:
1112      - in dynamics.F, skip the call to CALC_VISCOSITY if momViscosity=F
1113      - main_do_loop.F: no longer includes additional (AUTODIFF) header files
1114        when using TAF but only if using OpenAD.
1115    o pkg/mom_common+fluxform+vecinv:
1116      - always set horiz. viscosity arrays to background value before calling
1117        MOM_CALC_VISC (in MOM_FLUXFORM & MOM_VECINV) and call S/R MOM_CALC_VISC
1118        only when using variable horiz. viscosity (useVariableVisc=T);
1119      - simplify mom_vecinv.F (only 1 block for momViscosity).
1120    o pkg/mom_common: variable horiz. viscosity in NH code
1121      - move horiz-viscosity 3-D arrays viscAh_W & viscA4_W (used in calc_gw.F)
1122        from model/inc/NH_VARS.h to pkg/mom_common/MOM_VISC.h
1123      - store in common block (in MOM_VISC.h) logical parameters: useHarmonicVisc,
1124        useBiharmonicVisc & useVariableVisc.
1125      - fix old bug (already in 1rst implementation of variable horizontal viscosity
1126        in calc_gw.F, version 1.27, 2006/06/20):
1127        horizontal bi-harmonic viscosity in gW was missing when wiscA4W=0
1128        even if variable bi-harmonic viscosity (e.g., viscA4Grid) was non-zero.
1129      - change background horiz viscosity in vertical momentum (gW) to always be
1130        viscAhW,viscA4W (instead of switching to viscAhD, viscA4D when using
1131        any type of variable viscosity, e.g., viscAh/4Grid)
1132      - change default value of viscAhW,viscA4W to viscAhD,viscA4D (instead of
1133        viscAh,viscA4) which default to viscAh,viscA4 :  this avoid missing
1134        horiz. viscosity in W eq when just setting viscAhD/Z,viscA4D/Z (since
1135        default viscAh,viscA4 is zero).
1136    o model/src:
1137      - extend length of drC & recip_drC from Nr to Nr+1.
1138  o Divided Adjoint (DIVA) with MPI:  o Divided Adjoint (DIVA) with MPI:
1139    - genmake2: do not create local ./mpi_headers dir when no file to copy into.    - genmake2: do not create local ./mpi_headers dir when no file to copy into.
1140    - remove option ALLOW_DIVIDED_ADJOINT_MPI (replaced by ALLOW_DIVIDED_ADJOINT    - remove option ALLOW_DIVIDED_ADJOINT_MPI (replaced by ALLOW_DIVIDED_ADJOINT
Legend:
Removed from v.1.1901  
changed lines
  Added in v.1.2097
  ViewVC Help
Powered by ViewVC 1.1.22