/[MITgcm]/MITgcm/doc/tag-index

Diff of /MITgcm/doc/tag-index

Parent Directory | Revision Log | View Revision Graph Revision Graph | View Patch Patch

-revision 1.1321 by dimitri,
Wed Oct 27 05:48:33 2010 UTC
+revision 1.1918 by jmc,
Mon Aug 26 13:03:07 2013 UTC
 Line 4 
 $Name$
      Notes on tags used in MITgcmUV
      ==============================
+ checkpoint64n (2013/08/26)
+ o verification/halfpipe_streamice:
+   - change to matrix construction; update both Fwd & AD output.
+ o verification/tutorial_tracer_adjsens:
+   - OpenAD test: switch to vector-invariant momentum since fluxform with
+     rStar causes problems with OpenAD; update output.
+ o tools:
+   - genmake2: define a common prefix for all temp-file names ; move them
+     to local /tmp disk (but would be easy to move them back);
+   - xmakedepend: apply the same switch for temp-files.
+ o pkg/offline:
+   - changes for use with rStar (NLFS): assume that we continue to provide
+     UVELMASS/hFacW_ini & VVELMASS/hFacS_ini (hFacWi,S_ini as written in grid
+     output files) and apply r* scaling at each time-step (function of the time
+     varying Eta field); use normal pickup files (needed for restart with NLFS).
+ o adjoint with OpenAD:
+   - move OpenAD-specific files from verification/OpenAD/code_oad_all to a new
+     package openad.  This package has to be compiled for all runs with OpenAD
+     instead of specifying code_oad_all as a modification directory.
+   - link the fortran templates from tools/OAD_support to the build directory
+     for preprocessing to avoid conflicts between different setups compiled
+     simultaneously and simplify cleanup.
+ o pkg/exf:
+   - in exf_getforcing.F: comment out most of the EXCH calls (fields used by
+     main model or other pkgs are exchanged in EXF_MAPFIELDS).
+ o model/src:
+   - do_stagger_fields_exchanges.F: skip EXCH calls when using pkg/offline
+     (similar to do_fields_blocking_exchanges.F).
+ o tools/genmake2:
+   - remove TAF output src code just before calling staf (when not doing a fresh
+     built, will stop if things go wrong with staf).
+   - fix target "adobj" (left from TAF version-2 transition)
+ o pkg/diagnostics:
+   - add a parameter to track the status of pkg/diagnostics activation;
+     this replace/extend the use of logical param "settingDiags" (to check
+     when adding diag to the list) to also check any DIAGNOSTICS_[]FILL* call.
+     New S/R to print error message and stop when pkgStatus is not right.
+   - to try: add a warning when "data.diagnostics" exist but useDiagnostics=F.
+ checkpoint64m (2013/08/13)
+ o model/inc:
+   - move FCORI_MACROS.h from PARAMS(_MACROS).h to GRID_MACROS.h (left from
+yrs ago modif when Coriolis arrays were moved from PARAMS.h to GRID.h)
+ o pkg/kpp & aim_v23:
+   - only call DIAGNOSTICS_FILL when useDiagnostics=TRUE.
+ o pkg/seaice:
+   - restore (last time on 2011/12/24) ability to compile pkg/seaice with
+     undefined pkg/exf ALLOW_ATM_TEMP or ALLOW_RUNOFF CPP-options.
+   - only call DIAGNOSTICS_FILL when useDiagnostics=TRUE.
+ o eesupp/src:
+   - fix check for overlap-size argument (myOLn.GT.MAX_OLY_EXCH)
+     in exch1_rx[_ad].template (thanks to Francois Lefeuvre report).
+ o switch to TAF version-2:
+   - add flow directives to "freeze" naming convention for ad-routines that
+     are used in I/O routines of adjoint state and associated common blocks
+     that are used in adcommon.h (backward compatible with version-1)
+   - update all ad-optfiles (in tools/adjoint_options + few local to some
+     verification exp) to switch to latest TAF version (currently 2.5.5);
+     merge "*_mpi" adoptfiles into the corresponding non-mpi (but commented
+     out except for diva).
+   - the major change with TAF version-2 is that both the differentiated
+     routines and the forward routines (new) are returned as part of the TAF
+     output source code. Update genmake2 accordingly.
+   - new output for AD experiment tutorial_global_oce_biogeo (better AD gradient
+     with version-2 when compared to TLM or FWD gradient); other experiments
+     output show minor changes (machine truncation level); update the few AD &
+     TLM output with 12 matching digits only (some prior to version-2 switch).
+ checkpoint64l (2013/08/05)
+ o model/src:
+   - in dynamics.F, skip the call to CALC_VISCOSITY if momViscosity=F
+   - main_do_loop.F: no longer includes additional (AUTODIFF) header files
+     when using TAF but only if using OpenAD.
+ o pkg/mom_common+fluxform+vecinv:
+   - always set horiz. viscosity arrays to background value before calling
+     MOM_CALC_VISC (in MOM_FLUXFORM & MOM_VECINV) and call S/R MOM_CALC_VISC
+     only when using variable horiz. viscosity (useVariableVisc=T);
+   - simplify mom_vecinv.F (only 1 block for momViscosity).
+ o pkg/mom_common: variable horiz. viscosity in NH code
+   - move horiz-viscosity 3-D arrays viscAh_W & viscA4_W (used in calc_gw.F)
+     from model/inc/NH_VARS.h to pkg/mom_common/MOM_VISC.h
+   - store in common block (in MOM_VISC.h) logical parameters: useHarmonicVisc,
+     useBiharmonicVisc & useVariableVisc.
+   - fix old bug (already in 1rst implementation of variable horizontal viscosity
+     in calc_gw.F, version 1.27, 2006/06/20):
+     horizontal bi-harmonic viscosity in gW was missing when wiscA4W=0
+     even if variable bi-harmonic viscosity (e.g., viscA4Grid) was non-zero.
+   - change background horiz viscosity in vertical momentum (gW) to always be
+     viscAhW,viscA4W (instead of switching to viscAhD, viscA4D when using
+     any type of variable viscosity, e.g., viscAh/4Grid)
+   - change default value of viscAhW,viscA4W to viscAhD,viscA4D (instead of
+     viscAh,viscA4) which default to viscAh,viscA4 :  this avoid missing
+     horiz. viscosity in W eq when just setting viscAhD/Z,viscA4D/Z (since
+     default viscAh,viscA4 is zero).
+ o model/src:
+   - extend length of drC & recip_drC from Nr to Nr+1.
+ o Divided Adjoint (DIVA) with MPI:
+   - genmake2: do not create local ./mpi_headers dir when no file to copy into.
+   - remove option ALLOW_DIVIDED_ADJOINT_MPI (replaced by ALLOW_DIVIDED_ADJOINT
+     and ALLOW_USE_MPI) from model/src code and from ECCO_CPPOPTIONS.h.
+ checkpoint64k (2013/07/23)
+ o tools/OAD_support:
+   - avoid the need for file "oadtempflile" in insertTemplateDir.bash
+     and remove it from genmake2.
+ o tools/build_options:
+   - remove MPI_HEADER_FILES_INC setting (no longer used) and comment out
+     MPI_HEADER_FILES list (let genmake2 find the missing headers)
+ o verification/halfpipe_streamice:
+   - change to driving stress formulation; update both Fwd & AD output.
+ o tools/genmake2 and Divided Adjoint with MPI:
+   - remove default setting of MPIINCLUDEDIR from $MPIHOME (always been broken);
+   - only create local ./mpi_headers dir if using MPI and MPIINCLUDEDIR is set;
+   - add new variable (LOCAL_MPI_HEADERS, replace MPI_HEADER_FILES_INC) in
+     Makefile, which is set by genmake2, and check which mpi-headers are needed.
+     Note: need to update adjoint_options/adjoint_diva_mpi accordingly.
+   - update target "CLEAN" (to also remove ./mpi_headers/ dir).
+ o testreport:
+   - changes for Divided Adjoint Run: when file "run_ADM_DIVA" is present,
+     perform additional runs (number of additional runs is "add_DIVA_runs" taken
+     from file run_ADM_DIVA ; should match "nchklev_3" in file "code_ad/tamc.h").
+ o verification/lab_sea (AD test):
+   - change to test Divided Adjoint Run in this set-up (both standard AD test
+     and 2 secondary AD test: noseaice + noseaicedyn); drop the evp AD test.
+ o pkg atm_ & ocn_compon_interf:
+   - remove cpl_earlyExpImpCall=F option (was mainly a hack added for the old
+     staggerTimeStep implementation) and disable (retired) corresponding
+     parameter.
+ o pkg/offline:
+   - comment out unused field-array: ICEM, ConvectCount, hflx[01], icem[01];
+   - add S/R OFFLINE_CHECK to print offline parameter summary
+     and stop if loading a file that is not used;
+   - enable to calculate GMRedi tensor, KPP mixing and convective index
+     when the corresponding file(s) is/are not specified (but pkg is used).
+   - comment out resetting of monitorFreq (to endTime) since it still useful
+     for monitoring CFL numbers and checking offline fields.
+ o OpenAD:
+   - do not define OAD_DEBUG (in tools/adjoint_options/adjoint_oad) to get
+     smaller standard output) and generate new (smaller) output (on baudelaire
+     using gfortran with -ieee) for exp. tutorial_tracer_adjsens
+ o model/src:
+   - call EXTERNAL_FORCING_SURF outside bi,bj loops (in do_oceanic_phys.F),
+     (where external_forcing_adjust was called) and change list of arguments;
+   - merge external_forcing_adjust.F into external_forcing_surf.F
+   - put surface relaxation of SST & SSS in new S/R (forcing_surf_relax.F)
+     which also contains balancing surface relaxation (ALLOW_BALANCE_RELAX,
+     previously in file "balance_relax.F", now removed); remove corresponding
+     arrays in FFIELDS.h.
+   - EXTERNAL_FORCING_SURF is now called when using pkg/offline; implement
+     a hack for getting back surfaceForcingS (loaded from file) when using
+     ALLOW_OLD_VIRTUALFLUX (pkg/dic, in DIC_OPTIONS.h) in offline set-up.
+   - update output of AD test experiment global_ocean.cs32x15.seaice_dynmix
+     (was getting only 11 digits for AD-grad, due to different truncation
+      error in AD code).
+ checkpoint64j (2013/07/04)
+ o pkg/offline:
+   - to enable the use of other features with pkg offline (e.g., obcs),
+     also call S/R DO_OCEANIC_PHYS in offline run - more modifs to come.
+   - comment out "allowFreezing" (now active) in 2 offline testing exp.
+ o pkg/exf ALLOW_RUNOFTEMP
+   - fix sign and make compatible with temp_EvPrRn .NE. UNSET_RL
+   - ahdded RUNOFTEMP test to verification/global_ocean.cs32x15/input.seaice
+   - changes verification/global_ocean.cs32x15/results/output.seaice.txt
+ o pkg/atm_phys:
+   - allows to add some damping on uVel,vVel (strength only function of k).
+ o verification, ad-tests:
+   - reduce length of the simulation for AD test: global_ocean.cs32x15.seaice,
+     global_ocean_ebm and offline_exf_seaice.thsice.
+ o verification/halfpipe_streamice:
+   - found a bug in s/r pkg/streamice/streamice_advect_thickness which caused
+     flux input boundary conditions to be ignored; a fix for this bug changed
+     verification results for forward test.
+   - add adjoint test.
+ o pkg/ptracers:
+   - allow to restart without SOM pickup (resetting SOM to zero).
+ o pkg/gmredi:
+   - New parameterisation for the calculation of K and (GM_PsiX,GM_PsiY) added.
+   - It uses mixing length theory and suppression by steering level effects to
+     calculate a diffusivity used in the Redi tensor (see Bates et al., submitted
+     to JPO, for more details).
+   - It also uses the diffusivity to calculate an eddy induced streamfunction
+     based on a PV closure (rather than a buoyancy closure as in GM).
+   - New files added to pkg/gmredi:
+     gmredi_k3d.F calculates the diffusivity for the Redi tensor and the eddy
+       induced overturning streamfunction (called from gmredi_calc_tensor)
+     gmredi_calc_eigs.F calculates the eigenvalues and eigenvectors required
+       for use in gmredi_k3d
+     gmredi_calc_urms.F calculates the the rms eddy velocity used to calculate
+       the eddy diffusivity
+ checkpoint64i (2013/06/18)
+ o pkg/cheapaml:
+   - take src files from MITgcm_contrib/verification_other/offline_cheapaml/code
+     that enable the use of seaice (pkg/thsice thermo & pkg/seaice dynamics)
+     with pkg/cheapaml.
+ o utils/python: add subpackage for cubed sphere function, first example is
+     simple cs.pcol to plot 2D fields on a map
+ o pkg/streamice:
+   - This is a new package in MITgcm, which solves dynamic equations for ice
+      sheets and ice streams
+   - At the moment it is independent of atmosphere/ocean dynamics, or any
+     other physical packages in MITgcm, even ShelfIce (although it is anticipat-
+     ed that this will change)
+   - There is a new verification exercise that tests it, halfpipe_streamice,
+     evolves a 40x80 km ice stream/ice shelf (at coarse resolution) in a
+     rectangular embayment
+   - halfpipe_streamice is forward-only for now, will have TAF test soon
+   - for questions, email dgoldber@mit.edu
+ o pkg/thsice:
+   - fix filling of snow-precip diagnostic (SIsnwPrc) (left from the removing
+     of snowPrc from common bloc, on May 2nd, thsice_step_fwd.F revision 1.40);
+   - remove diagnostics 'SI_FrcFx' ( now identical to 'SI_Fract' with new
+      call sequence: ice-Thermo(thsice),ice-Dyn,ice-Advect );
+   - allow precip from pkg/cheapaml to make snow over seaice.
+ o pkg/cfc:
+   - move in separated header file (CFC_ATMOS.h) time-serie arrays of Atmos CFC
+   - remove atmos CFC 2-D arrays from common bloc (now local variables)
+   - change some hard-coded constant to run time parameter for reading and
+     and interpolating atmospheric CFC ; keep same default as previously.
+   - more flexible reading of Atmos CFC (number of records no longer hard-coded)
+   - put arguments in standard order: myTime, myIter, myThid
+   - use standard S/R GET_PERIODIC_INTERVAL for time interpolation of
+     atmospheric CFC ; fix for the case myIter < PTRACERS_iter0.
+   - fix calculation of surf tendencys for partial-cell and/or Non-Lin Free-Surf
+   - new routine to print summary of CFC params and check for consistency.
+ o pkg/seaice: add uice/vice to the parameter list of s/r seaice_advdiff,
+   similar to thsice_advdiff.
+   Note that for the B-grid case the routine parameters uc/vc are overwritten.
+ o pkg/cfc:
+   - change time interpolation for atmospheric CFC-11 (now same as for CFC-12);
+     update output (CFC-11) of experiment cfc_example and tutorial_cfc_offline.
+   - fix interpolation of atmphspheric CFC between Sorthern and Northern
+     hemisphere value.
+ o pkg/seaice:
+   - allow to use seaice dynamics without pkg/exf (e.g., using pkg/cheapaml)
+ o pkg/seaice: add Adams-Bashforth2 time discretization for ice dynamics;
+               so far only for JFNK-solver, turn on with SEAICEuseAB2 = .TRUE.
+   - requires an additional time level that is stored in the pickup
+   - you can start with AB2 from a pickup without this time level with
+     pickupStrictlyMatch = .false.
+ checkpoint64h (2013/05/26)
+ o pkg/cheapaml:
+   - replace one ()**.5 with SQRT + use temp var "cdu = tau/Du" (coare3_flux);
+     affect machine truncation (but exp cheapAML_box still pass with 13 digits).
+   - consistent treatment of uWind,vWind location: assume everywhere in
+     pkg/cheapaml that they are on C-grid (@ uVel,vVel location)
+     (Note: was already the case for Tair,Qair advection);
+     add option (INCONSISTENT_WIND_LOCATION) to recover old results.
+   - compute diabatic forcing only in the interior (excluding overlap regions)
+   - fill in array "Qsw" (for short-wave heating);
+   - add diagnostic for precip ; fill-in diagnostics for cheapAML state vars
+     before any update (consistent with MITgcm state var diagnostics);
+   - cheapaml_fields_load.F & cheapaml_init_varia.F : only fill outer edges if
+     non periodic ; + adjusted for uWind,vWind (C-grid).
+ o pkg/seaice:
+   - remove dependence of pkg/seaice versus pkg/exf (file: pkg/pkg_depend) and
+     add explicitly pkg/exf in experiments that currently use pkg/seaice.
+   - allows to compile pkg/seaice without pkg/exf.
+ o tools/OAD_support:
+   - use a local copy (ourRWCPinBd) to ensure index ourRWCP stays within bounds
+     of array "ourStepOf" in function rvNextAction (revolve.F90).
+ o pkg/aim_compon_interf renamed to pkg/atm_compon_interf
+   - change pkg name (to be used with other atmospheric physics pkg)
+     but by-pass CVS when making the new pkg so that we keep the CVS history.
+ o pkg/offline:
+   - call OFFLINE_FIELDS_LOAD from pkg/offline/offline_init_varia.F
+     (previously called from pkg/dic_surfforcing_init.F)
+ o model/src:
+   - re-order sequence of calls within packages_init_variables.F, using
+     standard order, except for:
+      DIAGNOSTICS_INIT_VARIA and OFFLINE_INIT_VARIA (called @ the top),
+      CTRL_MAP_INI and OBCS_INIT_VARIABLES (called @ the bottom)
+ o new pkg: atm_phys
+   - add entry point and source code (previously in contrib
+       verification_other/atm_gray/code_gray/) for new pkg "atm_phys"
+     (atmospheric physics pkg from P. O'Gorman and T. Schneider, JCl, 2008).
+   - re-order sequence of calls within packages_readparms.F,
+      packages_init_fixed.F and packages_write_pickup.F
+     (but skip packages_init_variables.F because of TAF issues).
+   - update contrib/*/atm_gray/ experiment.
+ o pkg/seaice (ITD code):
+   - simplify and fix the writing of pickup-files for ITD case
+ o pkg/seaice (ITD code):
+   - introduce floe size dependent lateral melt for ITD case;
+   - cleaning (avoid division by zero, change to f77 syntax, remove tabs)
+   - update seaice_itd experiment main output.
+ o pkg/thsice:
+   - remove snowPrc from common block THSICE_FLUX, in THSICE_VARS.h and
+     declared it locally (without bi,bj) in thsice_main.F & aim_do_physics.F;
+     changed accordingly pkg/atm2d.
+ checkpoint64g (2013/05/01)
+ o pkg/exf ALLOW_RUNOFTEMP
+   - if defined,  river and glacier runoff temperature can be read-in from
+     runoftempfile; runoftempfile needs to have same format as runofffile
+ o pkg/thsice (& pkg/bulk_force):
+   - In case Energy-Reference-Level (ERL) is used (temp_EvPrRn=0), account
+     for energy content of Precip + RunOff & Evap (like with pkg/exf).
+   - change computation domain to always be the interior (without overlap).
+   - fix bug (wrong overlap) when using EXF and stressReduction > 0.
+ o verification/tutorial_global_oce_biogeo:
+   - add preliminary OpenAD setup (still has problems)
+ o pkg/seaice:
+   - turn some parameters for choosing the convergence criterion of
+     the inexact Newton method (JFNK) into runtime parameters for convenience
+   - clean up seaice_calc_viscosities.F: remove/retire two options for
+     SEAICetaZmethod (1,2), introduce area weighting for method 3; this changes
+     the results of lab_sea/input because a division has been replaced by
+     a multiplication with the reciprocal (sumNorm)
+   - modify offline_exf_seaice/input.dyn_jfnk/data.seaice to improve
+     convergence of solver (changes results, of course), and to test some
+     new features
+ o model/src:
+   - remove unused (since Aug 2006) S/R SET_WRITE_GLOBAL_PICKUP and its call.
+   - remove unused forcing field "dQdT" and associated parameter "dQdTFile".
+   - move forcing adjustment (balancing surface forcing) in specific S/R
+     where might also be applied exchanges (if needed) to forcing arrays.
+ o pkg/shelfice:
+   - allow to specify the Ice-Shelf mass per unit area (instead of
+     shelficeLoadAnomaly) and do the conversion from one to the other
+   - move loading from file of shelficeLoadAnomaly from SHELFICE_INIT_VARIA
+     to SHELFICE_INIT_FIXED: (a) avoid some TAF recompution issues and
+     (b) will be loaded in time (before calling INI_PRESSURE) in case it is
+     needed in phi0surf for initial pressure calculation when useDynP_inEos_Zc
+   - update isomip experiment forward output (get machine truncation error
+     from conversion shelficeLoadAnomaly -> shelficeMass -> shelficeLoadAnomaly)
+ o verification/offline_exf_seaice:
+   revise data.seaice in input.thermo and input_ad and update results accordingly
+     HO = 0.2, SEAICE_areaLossFormula = 2,
+     SEAICE_growMeltByConv = .TRUE.,
+     SEAICE_doOpenWaterMelt = .TRUE.,
+   Improve consistency with input.thsice and fix the spurious 500m ice corners
+ o verification/global_ocean.cs32x15:
+   - set Energy Reference Level to liq. water @ 0 degC: temp_EvPrRn=0.,
+     in icedyn (thsice+seaice-dyn) test and update output.
+ o verification/offline_exf_seaice:
+   - adjust list of tested variables (with testreport) and update
+     standard test output with better slection of monitored fields.
+ o pkg/cd_code:
+   - swtich off Adams-Bashforth on the 1rst iteration. Update output of
+     experiment lab_sea.hb87
+ o tools/genmake2:
+   - change default makedepend from the system default to tools/xmakedepend:
+     When no makedepend is specified, select tools/xmakedepend it the test pass,
+     otherwise select the system default (if exist and pass the test) or
+     try to build cyrus-makedepend ; stop if none of the 3 works.
+ o pkg/exf & pkg/thsice:
+   - In case Energy-Reference-Level (ERL) is used (temp_EvPrRn=0), account
+     for energy content of Precip + RunOff & Evap. Assumes:
+) Rain has same temp as Air.
+) Snow has no heat capacity (consistent with seaice & thsice pkgs)
+) Run-Off comes at the temp of surface water (with same Cp)
+) Evap over ocean is released to the Atmos @ surf-temp (=SST); should be
+     put directly into Latent Heat flux & should use water-vapor heat capacity.
+) Evap over snow/seaice (pkg/thsice) assumes constant Lf+Lv (consistent
+     with snow having no Cp) => water vapor is released to Atmos @ 0^oC (=ERL).
+ o pkg/seaice: simplify the use of CPP flags in JFNK-related files
+     (compile when SEAICE_ALLOW_JFNK is defined)
+ o pkg/thsice:
+   - fix oceanic flux diagnostics & timeave (left from new sequence of calls
+     implementation): move THSICE_AVE call after the advection (called directly
+     from thsice_do_advect.F).
+ o verification/global_ocean.90x40x15 and OpenAD:
+   New experiment for OpenAD is identical to the one in input_ad except that
+     multiDimAdvection=.FALSE.,
+   There is still an issue with this.
+ o pkg/thsice:
+   - account for ice velocity (ocean relative velocity) in turbulent heat flux
+     at the base of the ice; update output of global_ocean.cs32x15 (icedyn)
+     and offline_exf_seaice (main test).
+ checkpoint64f (2013/03/31)
+ o verification/OpenAD:
+   - new (smaller, without OAD_DEBUG) output_oadm.txt generated using gfortran.
+ o verification/isomip, pkg/shelfice and OpenAD:
+   - add OpenAD setup to this exp and make shelfice package work with OpenAD
+ o verification/tutorial_global_oce_biogeo:
+   - update AD and TLM output after turning off ALLOW_FE (in DIC_OPTIONS.h)
+ o verification/offline_exf_seaice:
+   - replace adjoint experiment (now similar to fwd input.thermo/ setup).
+ o verification/tutorial_tracer_adjsens, pkg/ptracers and OpenAD:
+   - add OpenAD setup to this exp and make ptracers package work with OpenAD
+ o pkg/seaice/seaice_evp.F:
+    mask the asymmetric contribution of the ice-ocean stress (when
+    the turningAngle is non-zero) over open water to avoid stripes
+    in the EVP-solutions after many EVP-substeps. This does not change
+    the verification experiment (because turningAngle=0 in that experiment),
+    but will affect other EVP solutions with turningAngle.ne.0
+ o verification, AD & TLM output:
+   - new TAF version 2.3.10 (previously 2.3.8) add more parenthesis in multiple
+     additions and multiplications which affect results at machine truncation
+     level. Update few AD output (1D_ocean_ice_column, bottom_ctrl_5x5,
+     lab_sea.noseaicedyn & offline_exf_seaice) and TLM output
+     (1D_ocean_ice_column & tutorial_tracer_adjsens.som81) which had only 12
+     digits of matching.
+ o pkg/seaice:
+    modify lsr-algorithm so that it vectorizes AND converges by using a
+    "zebra" method: split vector loop into two with step size 2; this
+    solves a general convergence problem for the JFNK solver on a vector
+    computer. It has the potential to even improve convergence for
+    non-vector machines, but it does change the results so it is turned
+    off by default. To turn on define CPP-flags SEAICE_VECTORIZE_LSR and
+    SEAICE_VECTORIZE_LSR_ZEBRA in SEAICE_OPTIONS.h
+ checkpoint64e (2013/03/05)
+ o pkg/ecco and several verification experiments:
+    Remove special versions of the_model_main.F, the_main_loop.F, forward_step.F
+    from ecco package, and revert to unified routine in model/src/
+    Adjust verification experiments accordingly, especially gloal_oce_llc90
+    Should conclude long-standing work by Gael to reconsile the_main_loop with
+    ECCO and will enable OpenAD's revolve loop in ECCO setup.
+ o pkg/generic_advdiff:
+   - implement compressible flow method for multi-dim advection (similar to
+     gad_som_advect.F); add new option "GAD_MULTIDIM_COMPRESSIBLE" (since
+     TAF generates many recomputations) to use it; no yet coded with implicit
+     vertical advection.
+   - change experiment advect_cs (new output) and advect_xy (same output)
+     to test compressible flow multi-dim advection.
+ o pkg/generic_advdiff:
+   - fix SOM advection for unusual cases (linear Free-Surf in r*, other
+     cases where linear Free-Surf is not @ k=1, e.g., useShelfIce)
+ o pkg/seaice:
+   - fix bug in the no-slip implementation in seaice_calc_strainrates.F, this
+     bug affects two verification experiments (lab_sea and lab_sea.hb87),
+     recover old (wrong) results by setting noSlipFac = 2. in
+     seaice_calc_strainrates.F;
+   - add another averaging method for etaZ (etaZmethod=3), a mix of 2 and 0
+   - add runtime parameter SEAICE_JFNKepsilon for that finite difference
+     gradient in the Jacobian times vector operation (s/r seaice_jacvec)
+   - fix line search in seaice_jfnk.F (s/r seaice_jfnk_update)
+ o pkg/seaice: reorganize seaice_lsr.F to be able to reuse more code:
+   - new subroutines seaice_lsr_tridiagu/v
+   - introduce loop bounds i/jmin/max to be able to use a restricted
+     additive Schwarz method, but not used for now.
+   - rename SEAICE_CALC_LSR_COEFFS into SEAICE_LSR_CALC_COEFFS
+   - use new subroutines seaice_lsr_tridiagu/v in s/r seaice_preconditioner
+ o OpenAD support
+    Reorganize S/R call for overall time-stepping loop to facilitate
+    OpenAD revolve loop replacement
+    (new S/R main_do_loop.F)
+ o model/src:
+   - add 3-D array 3rd dimension to argument list of S/R ADAMS_BASHFORTH2/3;
+   - pkg/cheapaml: remove local S/R ADAMS2d and use instead standard S/R
+     ADAMS_BASHFORTH2.
+ o pkg/cheapaml:
+   - add new parameter (default=F, same as before) to disable full domain
+     (including land) periodicity in X & Y dir.
+   - new S/R CHEAPAML_COPY_EDGES to copy relaxation field into edges of
+     prognostics field ; merge the 2 S/R cycle_2d_tracer and timestep_2d_tracer
+     into single S/R CHEAPAML_TIMESTEP.
+ checkpoint64d (2013/02/17)
+ o pkg/monitor (angular momentum):
+   - do not add Eta contribution to the total AM if using rigid-lid;
+   - correct for Adams-Bashforth in zonal-wind part (instead of in AM_eta).
+   - horizontal discretisation: compute Zonal wind contribution separately for
+     each component (instead of from cell centered averaged) and use the 4
+     grid-cell corner averaged value of Omega*(R*cos_Phi)^2 in AM_eta part.
+   - Check that AM is conserved with linear dynamics (momAdvection=F and linear
+     FreeSurf) if using vectorInvariant momentum.
+ o model/src (horizontal grid):
+   - move initialisation of all horizontal grid arrays to null value
+     from specific horizontal grid S/R to main S/R INI_GRID;
+   - add 2 new arrays to project model C-grid velocity on to zonal direction
+     (similar to AngleCosC & -AngleSinC but at U and V point location) and
+     compute them in S/R CALC_GRID_ANGLES.
+ o pkg/seaice: replace a hard coded parameter by a runtime parameter
+     SEAICE_JFNK_tolIter
+ o pkg/seaice: introduce a restricted additive Schwarz (RAS) method in
+     preconditioner for JFNK (run LSR into the overlaps as far as possible,
+     i.e OLx/y-2, but overwrite the solution in the overlaps)
+   - extend loop range in seaice_calc_viscosity
+   - add new parameters SEAICE_OLx/y (default = OLx/y-2)
+   - add flexible loop ranges to seaice_preconditioner, seaice_calc_lsr_coeffs
+   - slightly modify loops in tridiagonal solver lsr-preconditioner
+   - by default remove the extra exchange in seaice_preconditioner with a
+     replacement of an undocumented CPP flag by SEAICE_PRECOND_EXTRA_EXCHANGE
+   - modify offline_exf_seaice so that old results without RAS are reproduced
+     for output.dyn_jfnk.txt
+   in seaice_fgmres.F (unrelated to RAS)
+   - add a cpp-flag option for a re-ordered mapping (potentially more
+     efficient), but because this changes the results, turn it off by
+     default
+   - replace the save statement by local common blocks
+ o utils/matlab:
+   - fix tile-offset in rdmnc.m when output was produced using EXCH2.
+   - update cs_grid/bk_line scripts to use load_grid.m (in utils/matlab)
+     instead of local script "load_cs.m".
+ o pkg/seaice:
+   - fix a serious bug in seaice_fgmres.F, s/r seaice_scalprod, connected
+     to the scalarProductMetric and the unrolling. By chance this does not
+     change the verification experiment, because of the particular domain
+     decomposition
+ o pkg/diagnostics:
+   - change default missing_value from UNSET_RL to -999.
+ o pkg/layers: improve vectorization of layers_fluxcalc.F
+   - step 1: split loops, make TatU/V 2D arrays. This alone reduces the cpu
+     time spent in this routine by more than a factor of 3 on an NEC-SX8
+   - step 2: replace search algorithm by a bisection algorithm found in
+     Press et al. Numerical Recipes in Fortran. This algorithm can be
+     vectorized and finds the correct bin in approx. log2(Nlayers) steps.
+     For now, use this algorithm only for TARGET_NEC_SX defined.
+   - moved the search algorithm into a separate subroutine, that is kept
+     within the same file for automatic inlining.
+   - modified catching potential errors
+ o pkg/ecco:
+   - add compile switches ALLOW_SHALLOW_ALTIMETRY and ALLOW_HIGHLAT_ALTIMETRY.
+ o model/src, pkg/autodiff, pkg/ctrl, pkg/grdchk :
+   - modifications for ALLOW_GENTIM2D_CONTROL
+   -- forward_step.F, the_main_loop.F : pass options and arrays for adjoint tapes.
+   -- load_fields_driver.F : add call to CTRL_MAP_GENTIM2D( myTime, myIter, myThid )
+   -- add xx_gentim2d0/1 in ctrl_ad_check_lev1_dir.h checkpoint_lev1_directives.h etc
+   -- use ctrl_swapffields.F (new) instead of exf_SwapFFields.F in ctrl_get_gen.F
+ o model/src:
+   - account for moist thermodynamics in (dry) potential temperature equation;
+     update results of experiments: aim.5l_cs (x2), fizhi-cs (std + aqualev)
+     and cpl_aim+ocn.
+   - also switch to standard compiler (gfortran, was using ifort previously)
+     for fizhi-cs experiments reference output.
+ o pkg/ctrl:
+   - 1st step toward generic time-varying control variable (2D) via CPP option
+     ALLOW_GENTIM2D_CONTROL
+   - note new namelist ctrl_nml_genarr in data.ctrl
+ o verification/global_ocean.cs32x15:
+   - switch off OLD_THSICE_CALL_SEQUENCE (both forward and AD code) to use new
+     thsice calling sequence and update "output.icedyn.txt" output file.
+ o pkg/ptracers:
+   - from Ryan A.: code to allow to restart a tracer at regular time interval
+     specifying a reset frequency and a reset-phase (for each tracers).
+ o pkg/thsice:
+   - implement new sequence of calls for thsice+seaice:
+       previously:   ice-Dyn,ice-Advect,ice-Thermo(thsice)
+       new sequence: ice-Thermo(thsice),ice-Dyn,ice-Advect
+   - allows (with temporary CPP option "#define OLD_THSICE_CALL_SEQUENCE"
+     in CPP_OPTIONS.h) to recover old sequence;
+   - update diagnostics for Intermediate State thsice diagnostics: now filled
+     just before advection (instead of just after advection in old sequence);
+   - update output of experiment offline_exf_seaice (standard test);
+   - in global_ocean.cs32x15 exp., postpone output.icedyn.txt update
+     by setting #define OLD_THSICE_CALL_SEQUENCE in CPP_OPTIONS.h
+ o pkg/aim_v23:
+   - use tiled array for aim_CO2 and surface wind speed for export to coupler;
+   - use standard pkg/mdsio routines to read & write CO2 pickup file;
+   - in-line S/R AIM_AIM2DYN_EXCHANGES in aim_do_physics.F;
+   - Implement new sequence of calls for seaice advection (with thsice and
+     seaice diffusion): do ice advection after ice-Thermodynamic (previously
+     was done before); change aim_do_physics.F (split the bi,bj loops block);
+   - use same CPP option (OLD_THSICE_CALL_SEQUENCE) to recover old sequence;
+ o pkg/thsice:
+   - add a missing EXCH of sIceLoad in thsice_main.F (ocean set-up) for the case
+     where just seaice diffusion is used without seaice-dynamics.
+ checkpoint64c (2013/01/18)
+ o pkg/seaice:
+   - add a parameter JFNKres_tFac that can replace JFNKres_t
+     (= JFNKres_tFac*JFNKresidual before JFNK solver)
+   - add a line search option to the JFNK solver
+   - move update of u/vIce and computation of initial residual into a separate
+     routine (same file); makes the code a little easier to read (?)
+   - the line search requires computation of the residual and for some reason
+     I cannot do the update of u/vIce at the beginning of the Newton loop
+     without changing the results, so we move computation of the new residual
+     also to the end of the Newton loop, even without the line search
+ o pkg/mdsio:
+   - write missing value (corresponding to undefined array value) to meta files;
+     skip this if missing value is one (UNSET_RL would be a better value for the
+     case of undefined missing value but it's current the default missing-value);
+     Also update mdsio_read_meta.F (reading timeInterval & missing-value).
+ o pkg/exf & thsice:
+   - for diagnostics purpose, fill-up and update Qsw array (+ fill the
+     diagnostics) even when SHORTWAVE_HEATING is #undef;
+ o verification/cfc_example:
+   - turn on pkg/layers with pkg/diagnostics (to test pkg/layers and to
+     illustrate how to use it).
+ o verification/offline_exf_seaice:
+   in input: add SEAICErestoreUnderIce=.TRUE., and reduce size of forcing
+     files to only one time-record.
+   in input.thermo: narrow the 2 bands of low initial ice-concentration near
+     N & S edges; switch on SEAICErestoreUnderIce=T; use pkg/diagnostics for
+     snapshot output; same mcPheePiston value as in thsice with
+     surf-current=0.2m/s.
+   in input.thsice: similar set-up as in input.thermo (channel with same seaice
+     initial conditions).
+ o verification/cfc_example:
+   - update file "data" with more standard choice (default rotationPeriod,
+     exactConserv=T, reduce ivdc_kappa to 10, remove multiDimAdvection=F,
+     set deltaTFreeSurf to deltaTtracer) and update the output.
+ o pkg/layers:
+   - fix bolus part so that it compiles with #undef GM_BOLUS_ADVEC;
+   - ensure that "layers_bolus" is switched to False when useGMRedi=False.
+ o verification/offline_exf_seaice:
+   - set all {field}period to zero for constant-in-time forcing (not tested
+     anywhere else).
+ o verification/offline_exf_seaice:
+   - dyn_lsr  : use pkg/seaice S/R (instead of pkg/thsice) to advect sea-ice;
+   - dyn_jfnk : use pkg/thsice S/R (instead of pkg/seaice) to advect sea-ice.
+ o model/src:
+   - implement Finite-Volume method for (hydrostatic) presure gradient
+     from S.-J. Lin (QJRMS 1997), for atmosphere using sigma-coordinate.
+ o pkg/seaice: implement EVP* by Lemieux et al. (2012).
+   - In order to be compatible with the default EVP code, this requires changing
+     the EVP code around a little; and because any small change immediately
+     breaks the lab_sea.hb87 verification experiment, the reference output is
+     updated two times (each time the remaining aggrement was only 2 digits):
+     - after replacing 1/dt by 1*recip_dt with a precomputed recip_dt
+     - after replacing 1/(1+0.5*dt/tau) by a/(a+1), with a=2*tau/dt
+     The adjoint test lab_sea.evp also needed to be updated.
+   - Turn on EVP* by setting SEAICE_deltaTevp as before, and setting
+     SEAICEuseEVPstar=.true.; for EVP* SEAICE_deltaTevp does not need to be
+     a factor of SEAICE_deltaTdyn, and you can set the number of EVP steps
+     explicitly with SEAICEnEVPstarSteps (thereby overriding the default of
+     INT(SEAICE_deltaTdyn/SEAICE_deltaTevp)). Controlling EVP* is deliberately
+     kept obscure, because I need to test it a little more.
+ o pkg/cheapaml:
+   - fix few incorrect type (_RL/_RS) in subroutine calls.
+ o pkg/seaice:
+   - new S/R SEAICE_MAP_RS2VEC (similar to SEAICE_MAP2VEC) to map _RS arrays
+     to _RL vector; this fixes JFNK code when compiling with "-use_r4" option.
+ o model/src:
+   - add a warning if using select_rStar=2 with nonlinFreeSurf <> 4;
+     change (in input_ad*/data) select_rStar from 2 to 1 for AD verification
+     experiments global_ocean.cs32x15 & tutorial_tracer_adjsens (+ update output)
+ o pkg/cheapaml:
+   - replace "273.1 _d 0" by celsius2K in pkg/cheapaml/cheapaml.F and
+     update output of experiment cheapAML_box.
+   - store in CHEAPAML.h coeffs ssq[0:2] for saturation specific humidity,
+     and set them only in one place (cheapaml_readparms.F).
+   - replace "273.16 _d 0" by celsius2K & replace "3.14159 _d 0" by constant "PI"
+   - remove re-setting of main-model parameter "celsius2K" (in cheapaml_readparms)
+     and re-setting of cheapAML params "lath" & "p0" (in cheapaml_init_varia).
+ o model/src/the_main_loop.F:
+   - fix revision 129 : need both ALLOW_ECCO and ALLOW_ECCO_EVOLUTION.
+ o pkg/seaice:
+   - remove legacy branch code.
+   - retire SEAICE_GROWTH_LEGACY and SEAICE_CAP_HEFF accordingly.
+ o verification/*/code*/SEAICE_OPTIONS.h:
+   - remove documentation for retired CPP flags (SEAICE_GROWTH_LEGACY,
+     SEAICE_CAP_HEFF).
+ o pkg/cheapaml:
+   - use standard routine (S/R GET_PERIODIC_INTERVAL) to decide when it is time
+     to load new forcing fields.
+   - add missing "_d 0" where it's needed; + some editing (improve indentation).
+   - remove switch to "-r8" compiler option (no longer needed) in verification
+     cheapAML_box, keep same output (small trucation error differences).
+ o verification/offline_exf_seaice:
+   - add thermodynamics only test.
+ o verification/cheapAML_box:
+   - split the domain in 8 (2x4) tiles; add MPI and multi-threaded test;
+     keep same output (same 14 digits for cg2d).
+   - switch on "-r8" compiler option (some numerical values are missing
+     the "_d 0") and update output (only 6 digits for cg2d were preserved).
+ checkpoint64b (2012/12/24)
+ o pkg/cheapaml:
+   - remove un-used variables (Qnet,EmPmR) from pickup files.
+   - store tendency of advected variables into cheapaml pickup file
+     and fix the AB-2 restart.
+ o verification/offline_exf_seaice and lab_sea adjoint:
+   - switch to new code (#undef SEAICE_GROWTH_LEGACY).
+   - switch to 4 time steps in offline, consistent with lab_sea.
+   - match parameters from SEAICE_GROWTH_LEGACY branch in data.seaice.
+   - update results after change of experiment seaice.
+ o pkg/seaice:
+   - remove option SEAICE_MULTICATEGORY; has been replaced with run-time
+     parameter SEAICE_multDim. Issue a warning if SEAICE_MULTICATEGORY is
+     still defined since SEAICE_multDim needs to be set to MULTDIM value (from
+     SEAICE_SIZE.h) to recover previous #define SEAICE_MULTICATEGORY default.
+ o model/src:
+   - add run-time parameter to select CG2D solver minimum-residual solution
+     (in case of a poor convergence).
+ o pkg/seaice/seaice_lsr.F
+   - move calculation of matrix coefficients into new
+     S/R SEAICE_CALC_LSR_COEFFS; for now this routine remains in the same
+     file; the main purpose of this change is to be able to reuse the code
+     in S/R SEAICE_PRECONDITIONER
+   - modify the computation of the residual so that the mass of sea-ice
+     is not used twice; this simplifies the calculations, but since
+     the residual is never used except when LSR_mixIniGuess.ge.4---and this is
+     not tested in testreport---this does not affect the testreport results.
+ o verification/seaice_obcs:
+   - disable SEAICE_GROWTH_LEGACY; reset input files to match those of
+     verification/lab_sea/input.salt_plume; changes results/output.txt*
+ o model/src:
+   - adapt quasi-hydrostatic formulation to work with p or p* coordinate.
+ o pkg/seaice:
+   - improve description of parameters in seaice_fgmres.F and start
+     cleaning up the code
+   - change name of SCALPROD to SEAICE_SCALPROD and modify meaning of
+     second argument
+   - add a metric based on grid cell area to SEAICE_SCALPROD; update
+     results of offline_exf_seaice.dyn_jfnk
+   - compute initial residual norm in seaice_jfnk based on SEAICE_SCALPROD
+ o pkg/aim_v23:
+   - fix an other bug in dissipation heating (grid-cell area was missing).
+ o model/src + pkg/seaice:
+   - add global (multi-tile) linear solver for pair of tri-diagonal system
+     along X and Y lines, respectively for U and V component.
+     Note: 1) MPI and cube-exchange not yet coded.
+) probably not accurate for poorly conditioned / large size problem.
+   - add option for SEAICE_LSR to use global (multi-tile) tri-diagonal solver;
+     default: not compiled and not used.
+ o pkg/seaice:
+   - first attempt at a multi-threaded fgmres solver for the JFNK solver:
+     introduce bi/bj loops and use global_sum_tile_rl instead of
+     mpi_allreduce in seaice_fgmres.F
+   - improve diagnostics output for fgmres solver (seaice_fgmres.F)
+   - replace a few unnecessary goto statements by if-blocks  (seaice_fgmres.F)
+   - add a verification experiment for JFNK in offline_exf_seaice
+ o verification:
+   - change (for now, only fwd test) offline_exf_seaice experiment:
+     use a re-entrant channel with idealized coastline (trapezoidal shape)
+     at southern boundary to explore seaice dynamics and thermodynamics
+     with simple forcing. Main set-up has dynamics+thermo and SST relaxation;
+     secondary test (input.thsice) use thermodynamics only with SST relaxation.
+   - add seaice-dynamics only secondary test using LSR and pkg/thsice advection.
+ o pkg/exf:
+   - disable "sstExtrapol" when Nr=1
+ o verification:
+   - add new experiment "cheapAML_box" (simple 1 layer set-up from Bruno Deremble)
+     to test pkg/cheapaml.
+ o pkg/aim_v23 & pkg/shap_filt:
+   - fix dissipation heating (erroneous gravity multiplication factor).
+ o pkg/seaice:
+   - remove unused field pressPre from jfnk solver
+   - rename two subroutines in seaice_preconditioner.F
+ o eesupp/src:
+    - S/R MDSFINDUNIT avoids reserved unit numbers (scrUnit1, eeDataUnit ...)
+ o pkg/seaice/seaice_preconditioner.F: fix preconditioner once again
+    - remove wrong parts of the rhs and the lhs (were in there
+      because I did not understand the concept of this preconditioner)
+    - add an exchange between u- and v-sweep. This increases communication
+      by a factor of two but improves the convergence of jfnk. Ideally,
+      one would like the u- and v-sweep to be independent. So far within
+      undocumented ifdefs
+    - reorganize the extra computations for printing the residuals
+ o tools/genmake2:
+   - comment out the "mpif.h" include in NetCDF test programm (for MPI built)
+     since it's not necessary (and was preventing to use MNC in some cases).
+ checkpoint64a (2012/11/16)
+ o pkg/autodiff:
+   - improve pkg-internal logical parameter switch (inAd/inFwd mode) so that
+     autodiff_readparms.F no longer depends on calling order (within
+     packages_readparms.F) and no longer requires to include ${PKG}_PARMS.h):
+     rename param turnFreeDriftInAdMode to SEAICEuseFREEDRIFTswitchInAd
+     and change param SEAICEuseDYNAMICSinAdMode to SEAICEuseDYNAMICSswitchInAd.
+ o pkg/obcs:
+   - adding tidal velocity forcing capability to obcs
+     for usage example, see verification/seaice_obcs/input.tides
+ o pkg/seaice:
+   - turn the LSR-relaxation parameters WFAU/V into runtime parameters
+     SEAICE_LSRrelaxU/V
+   - introduce runtime parameter SEAICEetaZmethod (=0 by default)
+ o pkg/aim_v23:
+   - implement heating from friction (bottom friction and stratospheric drag).
+ o pkg/shap_filt:
+   - fix diagnostic "SHAP_dKE" (was 2 time smaller); implement heating from
+     dissipation but only for Shap_funct=2, active when addFrictionHeating=T.
+ o model/src:
+   - move AddMass common block from DYNVARS.h to FFIELDS.h; allow to read-in
+     time-constant addMass field from file (addMassFile);
+   - support for heating due to friction (and Kinetic Energy dissipation):
+     add option, run-time switch and 3-D field array + support code ; each pkg
+     or S/R can add heating contribution (if there is a sink of KE); the sum is
+     accounted for as a Temperature tendency term (EXTERNAL_FORCING_T).
+ o pkg/seaice:
+   - complete merge of ITD code into seaice_growth.F
+     from MITgcm_contrib/torge/itd/code/
+     no verification so far, but Torge Martin tested
+     "1-D test case and Beaufort set up;
+     deliver okay results after 1 model year."
+   - complete merge of SEAICE_SIZE.h into all relevant routines
+   - move computation of eta at Z-points into calc_viscosities
+     + introduce global field etaZ
+     + add different methods for computing etaZ, for now the old
+       method (simple averages of eta to Z-points) is hardwired
+     + replace etaMeanZ by etaZ in seaice_lsr, seaice_calc_residual,
+       seaice_preconditioner
+   - simplify computations for SEAICE_ZETA_SMOOTHREG
+   - seaice_preconditioner:
+     + replace one remaining press by pressLoc (mistake)
+     + adjust printing of residuals
+   - improve I/O of diagnostics of JFNK in seaice_jfnk.F:
+     + add (SEAICE.h) and rename some counters (initiliased in
+       seaice_init_fixed.F)
+     + add _BEGIN/END_MASTER (myThid)  around print statements
+     + print total number of iterations and failures over SEAICE_monFreq
+       interval to STDOUT
+   - move control over output-messages by fgmres to seaice_jfnk to save
+     some operations
+   - move resetting initial guess for fgmres outside of seaice_fgmres_driver
+     in order to make restarts with sol .ne. zero (fgmres with restarts)
+     (seaice_jfnk.F, seaice_fgmres.F)
+   - seaice_calc_l/rhs.F: replace maskW/S by maskInW/S; this fixes
+     a serious convergence problem when open boundaries are involved
+ o pkg/ggl90: fix computation of control volumes for the case of
+   ALLOW_GGL90_HORIZDIFF (probably not used very often): move control volumes
+   up half a grid cell from C-centered to W-centered (pointed out by C. Eden)
+ o pkg/seaice: simplify seaice_evp by avoiding use of extra fields u/vIceC
+ o pkg/autodiff
+   - Add inAdMode switch for SEAICEuseDYNAMICS:
+     SEAICEuseDYNAMICSinAdMode
+     (extend logic in ADAUTODIFF_INADMODE_SET)
+ o pkg/seaice
+   - Step 1 of merging ice-thickness distribution (ITD) code from
+     MITgcm_contrib/torge/itd/ (author: Torge Martin)
+     The code implements concept laid out in Thorndike et al. (1975);
+     code is enabled via CPP flag SEAICE_ITD
+     nITD (in SEAICE_SIZE.h) defines number of ice thickness categories;
+     code is not complete yet!!
+   - SEAICE_SIZE.h now included in almost all seaice routines
+ o verification (using seaice):
+   - switch back seaice-dynamics (+ lower SOLV_MAX_ITERS) in ADM exp.
+     global_ocean.cs32x15.seaice ; update results.
+   - compile B-grid dynamics in FW test exp 1D_ocean_ice_column ;
+   - compile C-grid dynamics with #define SEAICE_ALLOW_JFNK in FW test exp
+     offline_exf_seaice (previously compiling B-grid).
+ o pkg/exf:
+   - fix some STOP conditions in exf_check.F (from Aug 28, modifs did not allow
+     to specify neither just 1 comp of wind or wind-stress, nor no surface momentum
+     forcing): just replace CPP option ALLOW_ATM_WIND with run-time param useAtmWind.
+ o pkg/layers (adjust changes from Sept 19):
+   - do snap-shot output and fill diagnostics from inside iLa loop (layers_calc.F)
+     this allows to remove "layers_maxNum" dimension from all layers arrays.
+ o pkg/layers (adjust changes from Sept 19):
+   - remove ALLOW_LAYERS_OUTPUT ; fix snap-shot and time-ave output ;
+   - snap-shot extended to all type of layers (not just the 1rst type);
+   - remove layers variables when corresponding CPP option is undef.
+ o pkg/layers:
+   - rename pkg/layers variable and add new output (layer exist & un-weighted
+     velocity in layer)
+ o pkg/seaice:
+   - simplify (?) ocean-drag coefficent computations by using
+     the same routine in all three solvers (saves some code lines)
+   - remove global fields DRAGA and DRAGS from C-grid code and
+     declare them locally in lsr.F (the only place where they are
+     still used)
+   - update AD output of lab_sea.evp (very sensitive anyway).
+ o pkg/seaice: add Jacobian-free Newton Krylov solver for ice dynamics
+   (Lemieux et al. 2010, 2012). Turn on with the usual SEAICE_ALLOW_JFNK
+   and SEAICEuseJFNK=.true. A few things to note:
+   - involves a FGMRES, that is parallel but very inefficient,
+     because of many scalar products (global sums) in the Gram-Schmidt
+     orthogonalization method. Needs to be replaced. Original code
+     from J.-F. Lemieux
+   - preconditioner for FGMRES is a stripped down version of LSOR
+   - SOLV_MAX_ITERS is now used for LSOR as a solver and as a
+     preconditioner. For the preconditioner, the default is set to 10.
+   - Jacobian times vector is computed with finite differences
+   - marginally related to JFNK-solver: add a smooth regularization for
+     zeta with tanh that will improve convergence (Lemieux and Tremblay,
+) for any implicit solver (not implemented for EVP because EVP
+     does not need this regularization in the first place). Define
+     SEAICE_ZETA_SMOOTHREG in SEAICE_OPTIONS.h to use.
+ o eesupp/src:
+   - check in genmake2 that intrinsic S/R flush is available.
+   - add S/R to flush IO unit (if intrinsic S/R flush is available)
+   - flush standard & error msg unit before MPI termination
+   - if debugMode, flush IO unit after printing msg
+ o pkg/ctrl:
+   - ctrl_unpack.F, ALLOW_GENARR3D_CONTROL code: fix missing argument in call
+     to ctrl_set_unpack_xyz.
+ checkpoint64 (2012/10/09)
+ o pkg/shelfice
+   - in mom_fluxform.F, mom_vecinv.F:
+     CALL SHELFICE_V_DRAG(bi,bj,k,vFld,KE,KappaRU,vF,myThid)
+     Bug fix KappaRU -> KappaRV
+     does not change verification/isomip but may change other setups
+     (presumably constant KappaRU=KappaRV)
+   - fix diagnostics SHIU/Vdrag (thanks to Tom Millgate)
+ o pkg/obcs:
+   - fixed some indexing bugs in obcs_seaice_sponge.F
+   - added obcs relaxation subroutines for HSALT and HSNOW
+   - changes verification/seaice_obcs/results/obcs_seaice_sponge.F
+ o pkg/seaice:
+   - add "multicategory" parameterization for snow in analogy to ice,
+     default is off for now.
+ o pkg/obcs:
+   - added obcs_seaice_sponge.F for obcs relaxation of seaice variables;
+     see verification/seaice_obcs/input.seaiceSponge for example application.
+   - remove local commom bloc "OBCS_GLOBAL" in obcs_readparms.F and do all the OB
+     index setting by master-thread. This fix multi-threads Pb in previous modifs.
+ o pkg/layers :
+   - add diagnostics to pkg/layers
+   - move the meat of pkg/layers from layers_calc.F to layers_fluxcalc.F
+     (from R.Tulloch). Layers_calc.F now calls layers_fluxcalc.F accordingly.
+ o pkg/generic_advdiff/gad_implicit_r.F :
+   - fix ADVr diagnostics in case of both implicit vertical advection and diffusion.
+ o pkg/seaice/seaice_growth.F:
+   - fix SItflux diagnostics in virtual salt flux + balanceEmpmr case.
+ o pkg/obcs:
+   - change default setting of OBCS_UVICE_OLD from defined to undef;
+   - use new parameter OB_indexNone for null index value (instead of hard-coded 0)
+     in all pkg/obcs code and in other pkgs; remove k loop in obcs_check_depths.F;
+   - pass OB_indexNone as (new) argument to S/R CTRL_MASK_SET_[X,Y]Z;
+   - change OB null index value (OB_indexNone) to -99 ; this fix the problem
+     with Southern & Western OB at a tile edge (at least in a simple set-up).
+ o pkg/obcs:
+   - change settings of OB index in case OB coincides with tile edge (shared by
+tiles), so that common OB location is registered by both tiles (instead of
+     only 1). However, for Southern and Western OB, index value = 0 is not
+     recognized as valid OB index (=default null value) and needs to be fixed.
+   - modify accordingly OBCS_BALANCE_FLOW and OBCS_MONITOR (avoid double counting)
+   - new parameter "OB_indexNone" for null index value (for now, still zero)
+     to replace hard-coded null index value of zero.
+ o pkg/exch2:
+   - improve W2_USE_E2_SAFEMODE (faster) and W2_E2_DEBUG_ON:
+     always check buffer-size (but outside the loop); move checking for valid
+     index from W2_USE_E2_SAFEMODE to W2_E2_DEBUG_ON; in W2_E2_DEBUG_ON,
+     print each tile and point connection only if |W2_printMsg|>= 2 and 3.
+ o pkg/ctrl (pack & unpack):
+   - in ctrl_pack.F & ctrl_unpack.F, use the same local file-name variable
+     (locally defined) for different variables (+ remove the variable-specific
+     file name in CTRL_GENARR.h). For now, only implemented for GENARR2/3D_CONTROL
+     (to be extended to other local file names in ctrl.h).
+ o pkg/flt:
+   - add a FLT_Iter0 option (similar to PTRACERS_Iter0).
+ o pkg/mdsio:
+   - fix missing STOP in mdsio_readvec_loc.F (case ioUnit=0) when file is missing
+ o tools/genmake2:
+   - add similar dependences for target EXE_AD & EXE_FTL as we have for EXECUTABLE
+     (added by Alistair in version 1.51 for building without make depend);
+   - remove Header files list (H_SRC_FILES) from the dependence of targets
+      ad_input_code.f & ftl_input_code.f (not clear why it was added in the first
+     place in version 1.23): this save going through staf when unrelated header
+     file has been modified.
+    Note: for an intermediate target (e.g., ad_input_code.f or adtaf) without
+     "make depend" step, still need to do "make links" before "make adtaf".
+ o eesupp/src (+ few pkg src files) & genmake2:
+   - finish to remove ALWAYS_USE_MPI in source code that TAF does not see;
+   - no longer set ALWAYS_USE_MPI in Makefile (was done by genmake2).
+   - improve genmake2 checking for ALLOW_${PKG} in CPP_OPTIONS.h files (distinguish
+      upper/lower case ; account for space between "#" and undef/define)
+ o pkg/flt (with exch2):
+   - cleaning: fix so that it compiles; move remaining MPI calls out of flt_exch2.F;
+   - simplify threads synchronisation; fix (many issues) multi-threaded with MPI.
+ checkpoint63s (2012/09/05)
+ o pkg/ecco:
+   - remove #ifdef ALLOW_SMOOTH_CORREL3D brackets.
+   - add more relevant #ifdef ALLOW_SMOOTH ones.
+   - sort out useAtmWind, useSMOOTH, ctrlSmoothCorrel2D.
+ o pkg/ctrl:
+   - CTRL_OPTIONS.h : document CPPs related to smoothing; ALLOW_SMOOTH_CORREL2D/3D,
+     ALLOW_CTRL_SMOOTH, ALLOW_SMOOTH_CTRL2D, ALLOW_SMOOTH_CTRL3D.
+   - ctrl.h : document run time params doInitXX, doMainPack, doMainUnpack, doPackDiag,
+     doSinglePrecTapelev (audodiff param!), ctrlSmoothCorrel2D (new) and
+     ctrlSmoothCorrel3D (new).
+     The added ctrlSmoothCorrel2D/3D replace the old ALLOW_SMOOTH_CORREL2D/3D CPP.
+   - ctrl_readparms.F : initialise ctrlSmoothCorrel2D/3D and read from namelist.
+   - ctrl_init.F ctrl_pack.F ctrl_unpack.F : switch off ustress/vstress
+     controls when useAtmWind, and vice versa.
+   - ctrl_map_ini_ecco.F : UVEL0, VVEL0, edtaux, edtauy cannot be smoothed as tracers.
+   - ctrl_get_gen.F : replace #ifdef ALLOW_SMOOTH_CORREL2D with
+       #ifdef ALLOW_SMOOTH, IF ctrlSmoothCorrel2D, IF useSMOOTH.
+   - ctrl_map_ini_gen.F : replace #ifdef ALLOW_SMOOTH_CORREL3D with
+       #ifdef ALLOW_SMOOTH, IF ctrlSmoothCorrel3D, IF useSMOOTH.
+   - ctrl_set_pack_xy[z].F, ctrl_set_unpack_xy[z].F:
+     replace ALLOW_SMOOTH_CORREL2D/3D brackets with ctrlSmoothCorrel2D/3D.
+ o pkg/smooth:
+   - remove un-necessary includes.
+   - remove ALLOW_SMOOTH*D and ALLOW_SMOOTH_CORREL*D brakets.
+     Those CPP options were never defined, and not necessary.
+ o model/src:
+   - fix CPP brackets in ini_mixing.F (GM_background_K belongs to gmredi).
+   - standard treatment of useSMOOTH.
+ o pkg/autodiff:
+   - add LOGICAL useGGL90inAdMode, useGGL90inFwdMode, useSALT_PLUMEinAdMode,
+     useSALT_PLUMEInFwdMode allowing to switch off ggl90 and salt_plume adjoint.
+ o pkg/exch2:
+   - add "if usingMPI" where it was missing (in exch2_rx?_cube*.template)
+     + start to remove ALWAYS_USE_MPI in source code that TAF does not see.
+   - make new S/R W2_MAP_PROCS out of w2_eeboot.F to setup exch2 CommonFlag
+     and tiles to process mapping.
+   - re-arrange 3 header files (W2_EXCH2_PARAMS.h, _BUFFER.h & _TOPOLOGY.h)
+     moving /EXCH2_FILLVAL_RX/ & /W2_EXCH2_COMMFLAG/ to W2_EXCH2_TOPOLOGY.h;
+     rename "exch2_tProc" to "W2_tileProc" and move seting of e2FillValue_RX
+     from w2_eeboot.F to w2_readparms.F.
+ o eesupp/src:
+   - set exchNeedsMemsync & exchUsesBarrier according to "usingMPI" (instead of
+     ALWAYS_USE_MPI) + moved from ini_communication_patterns.F to eeset_parms.F;
+     also move setting of exchCollectStatistics from exch_init.F to eeset_parms.F
+   - in eedie.F and all_proc_die.F, always call MPI_FINALIZE when ALLOW_USE_MPI
+     is defined (remove condition on usingMPI) to match cases where MPI_INIT
+     has been called.
+   - fix bug I put in previous modif of exch_sm_3d_rx.template (not much used);
+   - change default (non-MPI) value of myPid (from 1 to 0) to match MPI settings
+     (so that on 1 proc, get same myPid independently of usingMPI)
+   - add a stop if multi-procs but usingMPI=F ; stop also if usingMPI=T and
+     useCubedSphereExchange with EXCH-1 (safer).
+   - add "if usingMPI" where it was missing (+ start to remove ALWAYS_USE_MPI).
+ o pkg/ggl90:
+   - fix bug in filling corner mask array "mskCor" (FILL_CS_CORNER_TR_RL call)
+     used in ALLOW_GGL90_SMOOTH code.
+ o pkg/flt:
+   - fix typo in FLT_WITHOUT_Y_PERIODICITY (the effect was to ignore stopping
+     floats at the Southern end of the domain).
+ o eesupp/inc:
+   - add a list of CPP-options which can be set by Makefile (DEF_IN_MAKEFILE.h);
+     but not used (and not to be used) anywhere, just for documentation.
+ o pkg/autodiff, exf, ptracers & seaice (AD & TL output):
+   - comment out the very nasty "writeBinaryPrec = writeStatePrec" line, since:
+     a) can damage previously written records in any other multi-record files.
+     b) if needed, can easily do it cleanly, by calling S/R WRITE_REC_3D_RL/S.
+ o tools/genmake2:
+   - define variable MAKE within Makefile and use it in place of 'make';
+   - update AD_CONFIG.h (if needed) before building any of the executable
+     (forward, adjoint or tangent-lin); this involves a 2nd invocation of make;
+     and add the usual #ifndef/#define AD_CONFIG_H in AD_CONFIG.h;
+   - always print usual warning comment 'this file is automatically generated'
+     from script convert_cpp_cmd2defines (+ remove this warning from genmake2).
+ o pkg/cheapaml:
+   - updated to correspond to the code used in accepted paper (Nico Wienders).
+ o pkg/exf:
+     added run time switch useAtmWind to replace ALLOW_ATM_WIND cpp switch.
+     ALLOW_ATM_WIND now just sets the useAtmWind default (see exf_readparms.F)
+     and force defines ALLOW_BULKFORMULAE (EXF_OPTIONS.h).
+ o pkg/exf, autodiff, ctrl, ecco and seaice:
+     remove ALLOW_ATM_WIND brackets, or replace them with useAtmWind ones.
+ o pkg/ctrl, ecco:
+     allow to compile both ALLOW_U/VSTRESS_CONTROL and ALLOW_U/VWIND_CONTROL.
+     Depending on useAtmWind, one is inactive, and the other is active (see
+     exf_getffields.F/exf_getsurfacefluxes.F).
+ o tools/genmake2:
+   - improve error msg when failing in 2nd test of check_for_broken_Ff
+   - fix option '-makefile' short-name (-mf according to genmake2 -help)
+   - source local config file "genmake_local" just after processing the genmake2
+     command arguments (previously done before processing arg).
+ o pkg/grdchk:
+   - add a call to TURNOFF_MODEL_IO for Tangent-Linear run (in this case, call
+     to this routine from cost_final has been dropped in g_cost_final)
+   - improve printed information (more explicit msg, no longer using "print *,"
+      fix fcpertminus printed value).
+ o model/src:
+   - move call to COST_INIT_VARIA out of packages_init_variables.F directly
+     into initialise_varia.F (just after calling PACKAGES_INIT_VARIABLES):
+     this prevents getting cost-funct reset in adinitialise_varia recomputations.
+ o pkg/dic:
+   - move initialisation of "freefe" array from from dic_biotic_forcing.F to
+     fe_chem.F: this prevents TAF from dropping this initialisation in TLM code.
+ o pkg/grdchk:
+   - grdchk_main.F : added CALL GLOBAL_SUM_INT( ierr , myThid )
+   - grdchk_getadxx.F etc. : omit I/O if ierr.EQ.0
+ o pkg/autodiff/ctrl/grdchk :
+   - attempt to sort out what works and what does not,
+     with regard to I/O, and to warn/stop accordingly.
+ o pkg/grdchk:
+   - attempt to fix grdchk in the case of useSingleCpuIO.
+   - "if ( myProcId .EQ. grdchkwhichproc .AND. ierr .EQ. 0 )"
+    statements were moved from grdchk_main.F and into
+    grdchk_getadxx.F grdchk_getxx.F grdchk_setxx.F.
+   - a global sum is applied to record numbers icvrec/layer
+    out of grdchk_loc so that they be passed to I/O routines.
+ o pkg/smooth:
+   - fix recomputation that appeared with nlfs : use smooth_recip_hFacC,
+     smooth_hFacW, smooth_hFacS (copied at init_fixed) in 3d case.
+ o verification/testreport:
+   - add option '-tlm' for Tangent-Linear test (-adm,-oad,-tlm are all exclusive);
+   - can also use compressed (gzip) reference output file;
+   - change format (in pkg/grdchk) of TLM output (+ add forward gradient)
+     to be easier to collect by testreport.
+   - update existing TLM output (half out-of-date by more than 3 yrs).
+   - report NETCDF & LAPACK settings (from genmake2) in output dir.
+   - report run-time in each individual summary (previously only for AD test);
+     for TLM test, add also TAF version.
+   - add daily TLM test on (old) aces cluster + weekly test on baudelaire.
+ checkpoint63r (2012/08/15)
+ o tools/genmake2:
+   - fix Makefile for target ftlall (+ update files to clean after make ftlall)
+ o pkg/ecco/ecco_cost_final.F :
+   - fix fc print statements (to stdout and costfunction0000) so
+     that the printed value is always after the global sum.
+ o pkg/seaice/seaice_dynsolver.F :
+   - fix ice strength assymptote at SEAICE_area_max<1
+     (no change for the standard case of SEAICE_area_max=1)
+ o some cleaning:
+   - pkg source files: ensure that all *.F files from each pkg included the
+     corresponding ${PKG}_OPTIONS.h file (except stand-alone src file which
+     only includes CPP_EEOPTIONS.h); fix S/R CTRL_SMOOTH ; update AD experiment
+     code_ad/*.F src files; add new option-file in pkg/admtlm + corresponding
+     includes;
+   - model/src: add PACKAGES_CONFIG.h wherever ALLOW_AUTODIFF[_TAMC] is used.
+   - ALLOW_DIFFKR_CONTROL: add a stop in S/R CTRL_CHECK in case ALLOW_3D_DIFFKR
+     is undef; also define /DYNVARS_DIFFKR/ common block in DYNVARS.h when
+     ALLOW_DIFFKR_CONTROL is defined, to allow to compile and reach this stop.
+   - update option-file CPP_OPTIONS.h of all AD experiments:
+     * no longer include PACKAGES_CONFIG.h ;
+     * includes ECCO_CPPOPTIONS.h if PACKAGES_CONFIG.h has been included ;
+     * def/undef ALLOW_3D_DIFFKR independently of ALLOW_DIFFKR_CONTROL (before
+       including ECCO_CPPOPTIONS.h).
+ o pkg/cost, pkg/ctrl, pkg/ecco option-file:
+   - clean-up and split content of old pkg/ecco/ECCO_CPPOPTIONS.h file into
+     separated pkg option-file (done according to old doc from ECCO_CPPOPTIONS.h,
+     not necessary accurate).
+   - add a template for option-file ECCO_CPPOPTIONS.h, mostly empty, in
+     pkg/autodiff, i.e., the 1rst pkg to compile for adjoint built, with lines to
+     deliberately break compilation (a remainder that it needs to be customized)
+   - in pkg/ecco, includes ECCO_OPTIONS.h instead of COST_OPTIONS.h
+   - rename COST_CPPOPTIONS.h to COST_OPTIONS.h
+   - rename CTRL_CPPOPTIONS.h to CTRL_OPTIONS.h
+ o tools/genamke2:
+   - check for lapack.
+ o pkg/cost and pkg/ecco : attempt to sort out some of the limiting intricacies.
+   - pkg/cost.cost_final.F : allow for use of pkg/ecco and pkg/cost cost functions
+     jointly. The exclusive ifdefs were removed, to add costs terms (when defined)
+     from both packages.
+   - the fc global sum in pkg/ecco/ecco_cost_final.F was removed accordingly.
+   - for objf_atl we use either the pkg/ecco or the pkg/cost term depending on CPPs.
+   - pkg/ecco and model/src : add CPP brackets around pkg/cost and pkg/ctrl includes
+     of "CTRL_SIZE.h" "ctrl.h" "ctrl_dummy.h" "optim.h" / "cost.h" accordingly.
+ o pkg/cost : add comments to explain special and/or untested setups.
+ o pkg/exf:
+   - use EXF_OPTIONS.h to set pkg/exf options except if done in ECCO_CPPOPTIONS.h
+     (previously, ALLOW_AUTODIFF_TAMC was controling this switch).
+ o verification/*/code_ad:
+   mimimal cleaning of AD experiments ECCO_CPPOPTIONS.h option-file:
+   - reccord when this file is included (define ECCO_CPPOPTIONS_H)
+   - remove the most obvious obsolete features (e.g., #define ALLOW_COST not
+     allowed since Oct 2003 in any option-file except in PACKAGES_CONFIG.h)
+ o pkg/seaice :
+   - added possibility to change ice strength/PRESS0 relationship to
+     HEFF, according to the following run time parameters
+     SEAICEpresPow0 :: HEFF exponent for ice strength below SEAICEpresH0 (integer, >0)
+     SEAICEpresPow1 :: HEFF exponent for ice strength above SEAICEpresH0 (integer, >0)
+     SEAICEpresH0   :: HEFF threshold for ice strength            (m)
+ o pkg/ggl90 :
+   - added run time flag mxlSurfFlag to include the code that ensure
+     mixing between first and second level (previously included as a comment)
+ o verification/1D_ocean_ice_column/input_ad/data.autodiff :
+   - add test of newly added dumpAdByRec=T option where
+     we write all records to one file per variable.
+ o verification/global_ocean.cs32x15/code_ad/CPP_OPTIONS.h :
+   - switch to #define ALLOW_BALANCE_RELAX and ALLOW_BALANCE_FLUXES
+     to check that this code is ok with taf and compiles in adjoint.
+ o pkg/autodiff :
+   - added run time param dumpAdByRec : ad dump format switch.
+     If true then write all records to one file per variable.
+     Else write one file per record (remains the default).
+   - revise seaice_ad_dump.F and exf_adjoint_snapshots_ad.F accordingly.
+ o pkg/seaice:
+  - Added SEAICEuseTILT run time switch : if set to
+    false then omit the tilt term in seaice dynamics.
+  - Fix free drift calculation.
+ o pkg/shelfice:
+   When initializing SHELFICEDragQuadratic, set default to be
+   consistent with shiCdrag in case SHELFICEuseGammaFrict is used,
+   but retain option to set it independently
+   (inconsistenty spotted by Veronique Dansereau)
+ o eesupp/inc:
+   - in EEPARAMS.h, add real-type constant for some frequently used simple number
+      (0,1,2,1/2), with name explicitly referring to RS/RL type.
+ o model/src:
+   - move balancing of relaxation terms to new S/R balance_relax.F.
+ o pkg/autodiff:
+   re-write active I/O high-level (control) S/R:
+   - rename  S/R ACTIVE_READ/WRITE_RL to ACTIVE_READ/WRITE_3D_RL
+   - add 1 more argument (useCurrentDir) to replace the "_LOC" 2nd set of S/R.
+   - use standard pkg/mdsio I/O routines (MDS_READ/WRITE_SEC_XZ/YZ  and
+     MDS_READ/WRITE_FIELD); change loops to multi-threads.
+   - update and merge active_file_control_slice.flow into active_file_control.flow
+   - update the calls in lower level S/R (active_file.F, active_file_g.F and
+     active_file_ad.F) keeping the argument list and function unchanged.
+   - also update lower-level "_LOC" version (call same S/R with "useCurrentDir
+     =.TRUE.") and remove high-level (control) _loc version (not called anymore).
+   - new low-level active I/O routines, one for each type (RL/RS), for active var
+     of various (XY,XZ,YZ) shape and level number (arguments: arrShape, myNr);
+     fix ctrl_init_wet.F & ecco_cost_weights.F by calling the new S/R with the
+     right type.
+ o autodiff and RS=real*4:
+   - call the right type (_RS instead of _RL) of S/R in few output S/R (pkg/exf
+     ad-monitor and snapshots); disable arrType='RS' in mdsio_gl*.F ;
+   - change argument type of 3-D mask argument to _RS to match type in the call
+     (in seaice_cost*.F, ctrl_*_gen.F and *ctrl_bound.F); to be continued.
+ o pkg/thsice:
+   - re-anable balanceEmPmR when useSEAICE=T with useThSIce=T.
+   - option to correct ocean fresh-water flux for imbalance of Atmos+Land
+     fresh-water flux: uniform correction or proportional to local precip.
+ o pkg/ctrl:
+   - new header file CTRL_SIZE.h for parameters maxCtrlArr2D, maxCtrlArr3D
+   - redefine CPP option ALLOW_BOTTOMDRAG_CONTROL to
+                         ALLOW_BOTTOMDRAG_CONTROL_NONGENERIC
+   - verification/hs94.1x64x5/ tests ALLOW_GENARR{2D,3D}_CONTROL
+ checkpoint63q (2012/07/30)
+ o pkg/autodiff:
+   note about monitor and snap-shot of ad-variables:
+   a) need to apply ADEXCH before monitor or output of ad-vars to include
+    overlap contributions (was done for adjDump but missing for monitor).
+   b) since ADEXCH implies adding overlap values to interior array, machine
+    truncation error is expected when adding an ADEXCH call in the middle of
+    the time-stepping (although mathematically identical).
+   modifs:
+   - fix some incorrect type (RL/RS, UV/scalar) in ADEXCH calls and ad-vars
+     declaration (adEddyPsiX,adEddyPsiY in adcommon.h).
+   - add new run-time params (dumpAdVarExch & mon_AdVarExch) to select how  to
+     apply ADEXCH before monitor or snap-shot of ad-variables:
+        =0 : no ADEXCH ; =1 : do ADEXCH ; =2 : apply ADEXCH on a local copy.
+   - implement new method (copy+adexch) for snap-shot and monitor of main model
+     ad-vars (initially not used by default -> output unchanged).
+   - change default (set to 2) to use new method and update few output_adm.txt
+     with accurate ad-monitor (global_ocean.90x40x15, tutorial_global_oce_biogeo
+     and both tutorial_tracer_adjsens tests).
+   - switch 2 global_ocean.cs32x15 AD-tests to AB-2 (seaice_dynmix & thsice)
+     and turn off momDissip_In_AB in the 2 other (needed for stable AB-3).
+ o pkg/ctrl:
+   enable the use of a variable number (maxCtrlArr2D, maxCtrlArr3D) of
+   generic control variables via
+   #define ALLOW_GENARR2D_CONTROL and/or #define ALLOW_GENARR3D_CONTROL
+   Only required customization should be S/R ctrl_map_ini_genarr.F
+   (routine in repository contains example)
+ o pkg/exf:
+   - fix and refine checking of surface-relaxation setting when using EXF
+ o verification (adjoint exp):
+   - reduce length of simulation by half for experiment global_ocean.cs32x15
+     (std, seaice & seaice_dynmix) and exp tutorial_dic_adjoffline; update output.
+ o pkg/mom_common (mom_u/v_bottomdrag), pkg/shelfice (shelfice_u/v_drag)
+   - replace if statements KE.ne.0 with KE.gt.0 to avoid sqrt of negative numbers
+     of KE that can occur with aggressive optimization
+   + put quadratic bottom drag calculation in separated loops (only done if
+     using bottomDragQuadratic)
+ o model/src: CG2D_NSA
+   - clean-up:  stop if cg2dNormaliseRHS=T and AUTODIFF
+      and replace GLOBAL_SUM calls with GLOBAL_SUM_TILE.
+   - in test-exp that uses CG2D_NSA (bottom_ctrl & tutorial_tracer_adjsens),
+      change cg2d residual target to be expressed in Wunits (=> do not normalise
+      RHS ; this fix global_max Pb with TAF); update output.
+ o verification/tutorial_tracer_adjsens:
+    improve parameter consistency (and get rid of warnings):
+    - use deltaTFreeSurf=deltaTtracer (better with NonLin FreeSurf);
+    - switch Temp Adv Scheme from 81 to 80 (no limiter since theta < 0 is physical)
+    - use staggerTimeStep (for stability) in som81; use default rotation period.
+ o pkg/exch2:
+   - with empty facet: fix compact-format (W2_mapIO=1) definition (was previously
+     reset to 0 = 1 long line in X)
+ o pkg/mdsio:
+   - fix reading of dimensions from meta file for large-size domain
+ o model/src:
+   - fix saltIsActiveTr setting for IdealGas eosType (eosType is 6 character long);
+   - to refine CS-grid check, add logical flag "hasWetCSCorners": true if using
+     Cubed-Sphere Exch with CS-corners inside the domain;
+     make new S/R INI_GLOBAL_DOMAIN from code in ini_linear_phisurf.F to calculate
+     globalArea and to set hasWetCSCorners.
+   - add warning if usingCurvilinearGrid and momAdvection in flux-form (missing
+     metric terms); stop if hasWetCSCorners=T and momAdvection in flux-form.
+   - re-activate the stop if useCDscheme and hasWetCSCorners=T (previously if
+     useCDscheme and useCubedSphereExchange).
+ o pkg/seaice/seaice_growth.F :
+   - compute the SEAICE_DISABLE_HEATCONSFIX term accordingly
+     for the (.NOT.useRealFreshWaterFlux).OR.(nonlinFreeSurf.EQ.0)
+     when the previous code was not correct.
+   - in all cases diagnoze the boundary condition mismatch to SIaaflux
+   - in the case of useRealFreshWaterFlux.AND.(nonlinFreeSurf.GT.0) add
+     that term to QNET (essentially to set the melt/freeze water to 0degC).
+     when SEAICEheatConsFix is true, so that the ocean+ice budget heat is closed.
+ o verification/global_ocean.cs32x15/input.seaice :
+   - add SEAICEheatConsFix in data.seaice, ensuring closed ocean+ice heat budget.
+   - add diagnostics (commented out) for budget test using my matlab codes (gcmfaces).
+   - update results (output.seaice.txt) accordingly.
+ o verification/lab_sea/input/data.seaice :
+   - remove SEAICEheatConsFix, which is now be tested
+     in global_ocean.cs32x15. The presently coded fix
+     is only consistent with real fresh water + nlfs.
+   - update results (output.txt) accordingly.
+ o pkg/salt_plume: added diagnotic for salt tendency (oceSPtnd).
+ o AD_CONFIG.h file:
+   - in genmake2: remove "#undef ALLOW_ECCO_OPTIMIZATION" from AD_CONFIG.h;
+   - remove #include "AD_CONFIG.h" from all included OPTIONS files and
+     add it explicitly in each fortran src file where it is needed.
+     motivation: header file AD_CONFIG.h is generated/modified after "make depend"
+     thus introducing potentially wrong dependency; therefore, better to include
+     it only where it's really needed, and after any other included OPTIONS file
+     (less tempting to bring conditional includes according to ALLOW_ADJOINT_RUN
+     or ALLOW_TANGENTLINEAR_RUN).
+ checkpoint63p (2012/07/06)
+ o pkg/autodiff:
+   - rename S/R INI_AUTODIFF to AUTODIFF_INIT_VARIA ;
+   - create new header file "AUTODIFF_PARAMS.h" for pkg/autodiff parameters
+     which are now read from new parameter file "data.autodiff" (inAdExact
+     previously in "data", use{KPP/GMRedi/SEAICE}inAdMode previously in data.pkg)
+   - add file "data.autodiff" in all verification/*/input_ad/ directories.
+   - add run-time parameter to turn On/Off SEAICEuseFREEDRIFT in adjoint/forward
+     mode (used in global_ocean.cs32x15.seaice_dynmix test exp.)
+ o verification/tutorial_tracer_adjsens/
+   - add extra sub-verification which uses "SOM" advection scheme
+     (2nd Order-Moment Advection Scheme, Prather Limiter) with
+       #define GAD_ALLOW_TS_SOM_ADV in GAD_OPTIONS.h
+     and in data:
+       multiDimAdvection=.TRUE.,
+       tempAdvScheme=81,
+       saltAdvScheme=81,
+ o model/src:
+   - introduce ALLOW_BALANCE_RELAX which allow the removal
+    of the global mean of relaxation terms by setting
+    balanceThetaClimRelax and balanceSaltClimRelax
+   - disable balanceEmPmR and balanceQnet in the case when useSeaice.
+    This case is now treated appropriately in seaice_growth.F
+ o pkg/seaice:
+   - do balanceEmPmR and balanceQnet based on the net fluxes
+     (SItflux) that enter the ocean+ice system rather than QNET
+     and EMPMR. Works best in real fresh water.
+   - SIatmFW, SIatmQnet, and SItflux computations had to be moved
+     out of the diagnotics bloc, and stored in global arrays.
+ checkpoint63o (2012/06/29)
+ o vertical mixing schemes:
+   - remove unused S/R CALC_BUOYANCY (left from branch-atmos merging)
+   - replace computation of density (in Function STATE1, opps_calc.F) by a call
+     to S/R FIND_RHO_SCALAR
+   - pass sigmaR to S/R PP81_CALC, MY82_CALC (but not yet used) and to GGL90_CALC
+     and use it for N^2 calculation in ggl90_calc.F (save 2 density computations);
+     affects output (vermix.ggl90) at truncation level.
+ o testreport:
+   - change adjustment of SIZE.h for mpi+mth testing: preserve enough tiles
+     (nSx,nSy) for the number of threads (from eedata.mth)
+ o model/src:
+   - remove 2nd set of calls at the top of initialise_varia.F (Adjoint part)
+     related to Non_Lin Free-Surf or Bottom-Control (but not longer necessary).
+ o verification/tutorial_tracer_adjsens/
+   - compile with ALLOW_CG2D_NSA
+   - run with nonlinFreeSurf=3
+   - update reference output_adm.txt
+ o tools/genmake2:
+   - add "-DHAVE_NETCDF" to the DEFINES list when NetCDF is available ;
+     refine usePROFILES switching off (only when NetCDF is not available).
+ o verification (atmospheric set-up):
+   - change eosType='IDEALGAS' to eosType='IDEALG' to match variable declaration
+ o pkg/profiles : refine profiles and files handling.
+ o model/src and pkg/ecco : introduce run-time switch usePROFILES.
+ o model/src/the_main_loop.F, forward_step.F and pkg/exf/EXF_OPTIONS.h :
+   - changes to use model/src/the_main_loop.F rather than the ecco version
+     in ecco type adjoint runs.
+ o model/src:
+   - move computation of recip of grid distance & area from INI_MASKS_ETC to INI_GRID
+   - move setting of h0Fac[C,W,S] from INI_LINEAR_PHISURF to INI_MASKS_ETC
+   - update_masks_etc.F: rename SMOOTH*_R4,R8 function to the corresponding type (RS,RL)
+ o model/src:
+   - fix S/R UPDATE_CG2D for ALLOW_DEPTH_CONTROL case (was empty before);
+     update output of test experiment bottom_ctrl_5x5.
+ o pkg/generic_advdiff:
+   - implement vertical bi-harmonic diffusion (for now, only for T & S and
+     only explicitly).
+ o verification/bottom_ctrl_5x5/
+   update reference output (results changed quite some time ago,
+   not sure when; but new reference results look ok in terms of grdchk)
+ o verification/1D_ocean_ice_column/
+   For verification purposes, the exact adjoint rather than an approx.
+   should be used (e.g., to comare against F.D. or TLM).
+   removed autodiff_inadmode*_ad.F routines in code_ad/
+   Update results/ accordingly.
+ o pkg/cal:
+   - change cal_getdate.F so that output date is function of input time only
+     (less ambiguous, not mixed up with input iteration number).
+   - fix calendarDumps for non-zero phase-lag (S/R CAL_TIME2DUMP).
+ o pkg/diagnostics:
+   - implement calendarDumps also for stats-diags
+   - implement calendarDumps also for snap-shot output (negative freq)
+   - for now, ignores calendarDumps if non-zero phase-lag.
+ checkpoint63n (2012/06/04)
+ o model/src:
+   - recompute rSurfW & S to ensure consistent column thickness (needed for rStar)
+     between Sum_k(hFac*drF) and rSurf-rLow, for now only when using pkg/shelfice;
+   - use h0FacC, W & S to compute hFac_surfC, W & S in calc_surf_dr.F (more
+     similar to calc_r_star.F); update results of experiment internal_wave and
+     tutorial_global_oce_in_p (affected @ truncation level).
+ o pkg/shelfice:
+   - add parameterisation of advective-diffusive flux into the ice shelf
+     according to Holland and Jenkins (1999), eq.22-33, as suggested by Jan De Ryd
+   - simply eps3/3a computation
+ o eesupp:
+  - add new CPP option (DISCONNECTED_TILES) to disconnect tiles (no exchange
+    between tiles, just fill-in edges assuming locally periodic subdomain) and
+    add corresponding exchange subroutines (EXCH0);
+  - new CG-solver version (_EX0) for disconnected-tiles special case.
+ o model/src (CG-solvers):
+  - modify Single-Reduction version (CG2D_SR) in case cg2dMaxIters is reached
+    (similar final residual output and max-Iter number as with standard version);
+  - allows to store and use lowest-residual solution (standard & _SR versions);
+  - cleaning up (remove old, commented out code, LETS_MAKE_JAM ...).
+  - by default, also compile CG2D_SR version (define ALLOW_SRCG in CPP_OPTIONS.h)
+ o eesup/src:
+  - global_vec_sum.F cleaning: add a BARRIER ; update comments ; remove ndef
+    ALWAYS_USE_MPI (no longer needed after fixing usingMPI settings - March 2012)
+ o pkg/salt_plume added to lab_sea/input_ad.noseaicedyn
+ checkpoint63m (2012/04/27)
+ o pkg/shelfice:
+  - account for partical cells in surface level below ice-shelf for hydrostatic
+    pressure calculion (set uniformFreeSurfLev to F); update isomip experiments.
+ o ad test experiments:
+  - update and rename to "ad_optfile.local" local AD-optfile specific to a
+    particular adjoint verification experiment (in verification/*/code_ad/)
+ o pkg/seaice & pkg/exf:
+  - Part two of ECCO-CLIVAR code merges.
+    Completes merge of seaice area relax. code.
+    Requires unified CPP option EXF_ALLOW_SEAICE_RELAX
+    to be set in EXF_OPTIONS.h since this pkg controls its I/O
+    (and avoids second CPP option in SEAICE_OPTIONS.h)
+  - change default value of costIceStart & costIceEnd to a valid date.
+  - add snowPrecip to HSNOW in seaice_growth
+ o pkg/ptracers:
+  - move ptracers summary and setup check into separated S/R ; add a check for
+    valid PTRACERS_Iter0 value (error+stop or just warning).
+ o pkg/cal (+ pkg/ecco):
+  - avoid calling a S/R with 2 times the same arg (FWD: unless both are only used
+    as input; and for AD, unless both are not differentiable (e.g., k index)).
+ o model/src:
+  - define internal flag "uniformFreeSurfLev" (=T when free-surface level-index
+    is everywhere k=1) to speed-up some calculations (by pass kSurf reference);
+    temporary set to usingZCoords value (to be changed to F when using shelfice).
+  - hydrostatic pressure: implement partial cell near the surface also for
+    Z-coordinates (for the case where uniformFreeSurfLev=F); replace test on
+    usingZCoords with test on uniformFreeSurfLev where needed (in NonHyd code).
+ o pkg/ctrl/ctrl_init.F:
+  - add a formal parameter to s/r ctrl_init_rec to print
+    xx_$(ctrl_valiable)_file for easier debugging
+  - move call of cal_* routines into the if-block where they are really
+    needed so that xx_$(ctrl_variable)_period can be 0 or -12 without having
+    to specify a startdate
+ o pkg/seaice:
+  - update comments in SEAICE_OPTIONS.h (+ similar update of lab_sea/code and
+    global_ocean.cs32x15/code versions).
+  - turn on seaice Multi-category (in data.seaice, SEAICE_multDim=7) for
+    verification experiment global_ocean.cs32x15.seaice and update results.
+ o pkg/exf:
+  - new S/R EXF_GETFIELD_START to return starting-time of a forcing field
+    (according to useExfYearlyFields).
+ o pkg/cal:
+  - move calendar setting & summary (previously in cal_readparams.F) into new
+    S/R CAL_INIT_FIXED to be called later in the initialisation process, once
+    length of the simulation is set (after SET_PARMS call); This is an attempt
+    to fix Pb when, e.g.: pkg/longstep, modifies the length of the run.
+  - For safety: keep a record of pkg/cal parameter settings status
+            to allow to STOP if one pkg/cal S/R is called too early.
+  - add a stop in all basic pkg/cal subroutines if called before setting is done.
+  - modify cal_getdate.F: stop when nothing was returned;
+    if called with myIter=-1, simply retrun modelBaseDate (1,2 = startDate_1,_2);
+    this allows to remove "cal.h" from seaice_read_parms.F & init_mnc_vars.F.
+ checkpoint63l (2012/04/04)
+ o pkg/bbl:
+   - fix call to FIND_RHO_2D in bbl_calc_rho.F (case multi-tiles per proc);
+     update global_with_exf output.yearly.txt file.
+ o pkg/cal:
+   - start to clean-up cal_set.F ; fix for the case where baseTime is non-zero.
+   - remove 2 unsused and very short (1 line only) functions ;
+   - remove unsused subroutines from AD-Diff list.
+ o model/src:
+   - start to implement clean wait to stop in initialization S/R (config_check.F,
+      packages_check.F, ini_parms.F and pkg/obcs/obcs_check.F + pkg/mypackage)
+ o folowing PRINT_MESSAGE changes:
+   - remove reminder multiple print to the same file (STDOUT) when multi-threads.
+ o pkg/bbl:
+   - modification so it can work with z*
+   - replace deltaT with dTtracerLev(k) for asynchronous time stepping
+   - global_with_exf/input.yearly verification; changes output.yearly.txt
+ o eesupp/src:
+   - PRINT_MESSAGE: use OpenMP critical instruction (similar to PRINT_ERROR);
+     writing to unit 0 (if unit=errorMessageUnit) extended to the case myThid=1
+   - CHECK_THREADS: specific code if using OpenMP threading: improve checking of
+     # of threads across processors (e.g., different env OMP_NUM_THREADS setting)
+   - improve special preliminary call to EESET_PARMS (if eedata is read 2 times).
+   - when using MPI, always set usingMPI=T ; set default accordingly and stop
+     if not consistent.
+   - ALL_PROC_DIE: add a BARRIER after MPI_FINALIZE call ; skip this when thread
+     argument is zero (in case called within single-thread section).
+ o pkg/fizhi:
+     clean-up turbulence cold-start switch: decided in fizhi_init_vars.F, stored
+     in common bloc (fizhi_coms.h) and then passed as argument up to S/R TURBIO.
+ o pkg/exch2:
+   - add argument "updateCorners" to S/R exch2_get_uv_bounds (enable to
+     activate EXCH_IGNORE_CORNERS in vector EXCH S/R).
+   - switch 1rst EXCH call to IGNORE_CORNERS (instead of UPDATE_CORNERS)
+     but keep the 2nd with UPDATE_CORNERS: this prevents overwriting good data
+     with bad ones coming from a not-yet-updated halo.
+     This should fix the problem when sNx <> sNy and GCD(sNx,sNy) < 2*Olx.
+ o pkg/frazil:
+     move FrzForcT diag from frazil_diagnostics_state.F to frazil_calc_rhs.F
+     http://mitgcm.org/pipermail/mitgcm-devel/2012-March/005384.html
+ o model/src/config_check.F: add a check for OLx>sNx/OLy>sNy
+ o verification/lab_sea
+   * #undef SEAICE_EXCLUDE_FOR_EXACT_AD_TESTING
+   * #define ALLOW_SST_CONTROL & ALLOW_SST_CONTROL
+   * nTimeSteps 3 -> 4
+   * changed reference output accordingly
+ o pkg/ctrl:
+   * fix ctrl_get_gen for xx_sst, xx_sss
+ o pkg/fizhi:
+   - fix 2 calls to S/R GRD2MSC (argument igrd) in update_earth_exports.F
+     update results of exp. fizhi-cs-32x32x40 (fail with only 6 digits for cg2d)
+   - by default, use new version of S/R GETPWHERE (#define TRY_NEW_GETPWHERE);
+     fix few out-of-bounds indices in referencing vars (initialise igrd to 1);
+     clean-up fizhi_turb.F (remove unused & uninitialised qdiaglsm array).
+ o pkg/gmredi:
+   - add diagnostic of Redi (main diagnonal) vertical diffusive flux of Temp
+ o pkg/fizhi:
+   - fix few initialisation and multi-tile Pb: aqualev & gridalt now pass the
+     (old)aces open64 tuv test.
+ o pkg/icefront: fix bug and reorder loop in icefront_init_varia.F
+ o pkg/mom_vecinv:
+   - fix 1 loop range in mom_vecinv.F to be like all the other loops which
+     set/update gu,gv/Diss (fix Pb of uninitialised fVerUkp in admom_vecinv
+     with non-lin free-surf).
+ o model/src: move k-loop outside of i/j-loops when (re-)computing R_low
+   in ini/update_masks_etc.F in order to avoid -O3 optimization problems with
+   some compilers (gfortran 4.6.0 on MacOS)
+ o momentum:
+   - separate fVer?(:,:,kUp) & fVer?(:,:,kDown) in argument list of MOM_FLUXFORM
+     & MOM_VECINV subroutines (to help TAF). This fixes Pb of uninitialised
+     fVer?(kUp) in admom_fluxform with non-lin free-surf or bottom control.
+ checkpoint63k (2012/03/17)
+ o model/src:
+    - selectAddFluid (ALLOW_ADDFLUID): add missing term in horizontal momentum
+      flux-form (mom_fluxform.F) and vertical momentum (calc_gw.F) equations.
+    - SOLVE_DIAGONAL: switch default to use adjoinable & vectorized version
+      (#undef SOLVE_DIAGONAL_LOWMEMORY); update output of exp. front_relax.bvp.
+ o model/src: solve_*diagonal.F
+    - replace division with multiplication by inverse (similar to original version)
+      update output of AD exp. global_ocean.90x40x15.
+    - fix pkg/gmredi/gmredi_calc_psi_bvp.F & pkg/ggl90/ggl90_calc.F
+      to enable the use of the vectorized & differentiable solve_tridiagonal.F
+    - test exp. global_ocean.90x40x15/input_ad: switch to advection scheme 20 for
+      vertical advection (to get solve_tridiagonal tested in AD mode).
+ o pkg/seaice: ECCO-CLIVAR merge:
+. seaice AREA relaxation
+      * CPP option: SEAICE_ALLOW_AREA_RELAXATION
+      * runtime flag: SEAICE_tauAreaObsRelax
+. modified global mean cost imbalance code: CPP option
+       ALLOW_SSH_GLOBMEAN_COST_CONTRIBUTION
+ o another iteration on solve_*diagonal.F
+    Make choices independent of AUTODIFF
+    Default will be the adjoinable vectorized version.
+    Alternative choices are:
+    * non-adjoinable original version with low memory footprint:
+      #define SOLVE_DIAGONAL_LOWMEMORY
+    * still adjoinable but does not vectorize (k as inner-most loop):
+      #define SOLVE_DIAGONAL_KINNER (keeping SOLVE_DIAGONAL_LOWMEMORY undef)
+ o testreport
+  - add option to use a home made wrapper around "make"
+  - remove MITGCM_IEEE env. variable (no longer active)
+ o pkg/shelfice
+  - improve computation of friction velocity for velocity dependent
+    exchange coefficients: include velocities into SHELFICEBoundaryLayer
+    block to average velocities vertically
+  - add TAF store directives for SHI_ALLOW_GAMMAFRICT
+ o Modify diagonal solvers, now three versions (upon request):
+   #ifndef SOLVE_DIAGONAL_AUTODIFF
+. default version (dating back a while ago)
+   #else /* def SOLVE_DIAGONAL_AUTODIFF */
+   # ifdef SOLVE_DIAGONAL_KINNER
+. adjoinable version with k-innermost loop (G. Forget)
+   # else
+. adjoinable vectorized version of 2.
+   # endif
+   #endif /* SOLVE_DIAGONAL_AUTODIFF */
+   All flags are currently set within routines, but could/should be moved to CPP-options.
+   Array bounds for 1. are as before, for 2.,3. cover the entire domain
+   (could be changed for 1. too).
+ o verification/lab_sea (fwd):
+   - update the 4 fwd lab_sea test experiment: no longer SEAICE_GROWTH_LEGACY,
+     use 7 categories (except hb87), new solve4temp params (except salt_plume),
+     constant salinity (=4) or variable salinity (salt_plume) done through
+     SItracer.
+ o pkg/seaice:
+   - rename parameters: SIsalFrac to SEAICE_saltFrac & SIsal0 to SEAICE_salt0;
+   - remove old parameters ( SEAICE_freeze, SEAICEturbFluxFormula, SEAICE_gamma_t,
+      SEAICE_gamma_t_frz, SEAICE_availHeatTaper & SEAICE_availHeatFracFrz)
+     from SEAICE_PARMS.h ; still need to fix seaice_cost_sst.F (broken when
+     SEAICE_freeze got retired) but already better than previously with
+     SEAICE_freeze=123456.7 deg.C;
+   - move setting of facOpenGrow/Melt from SEAICE_INIT_FIXED to SEAICE_READPARMS
+     (safer multi-threaded setting); always set SEAICEuseEVP;
+   - setting of ocean-ice turb. flux coeff: moved from SEAICE_CHECK to
+     SEAICE_READPARMS & SEAICE_INIT_FIXED (this fixes wrong summary report);
+     stop if multiple specifications for the same coeff; make sure default
+     SEAICE_mcPheePiston is compatible with drF(1) & deltaT.
+ o pkg/obcs:
+   - allow to switch to upwind 1rst order advection scheme for the advective
+     flux computation at the open-boundary; disabled for adjoint built.
+ o pkg/ptracers:
+   - rename PTRACERS_RESTART.h -> PTRACERS_START.h
+   - rename ptracers_fields_blocking_exchanges.F -> ptracers_fields_blocking_exch.F
+   - add parameter to decide when to start a tracer; use internal flag to
+     know which tracer to step-forward; switch this internal flag at the top
+     of forward_step.F (new S/R PTRACERS_SWITCH_ONOFF); for now, not enabled
+     for adjoint built.
+ o pkg/seaice:
+   - add SEAICE_SIZE.h anywhere in the code where SEAICE.h is included ;
+   - move MULTDIM declaration and setting from SEAICE.h to SEAICE_SIZE.h ;
+   - keep experiment offline_exf_seaice truly single category (set MULTDIM=1).
+ o pkg/ecco:
+   - fix writing of output file DiagnosCost_ClimSalt/Theta
+     and DiagnosCost_DriftSalt/Theta (if multi-tiles per proc).
+ o pkg/seaice:
+   - add missing initialisation of COR_ICE array in dynsolver.F
+   - merging SEAICE_MULTICATEGORY define and undef cases. Now the same code is
+     compiled either way, and is tested in all exps (multidim was only tested
+     in lab_sea ad before).
+   - cosmetic change to prepare for future addition of ITD. no change to results.
+     no defaults change.
+   - added run time param SEAICE_multDim (7 for SEAICE_MULTICATEGORY, 1 otherwise).
+   - by lack of adequate verification experiments, I further used custom versions
+     of global_ocean.cs32x15 to test multicat or not, with pickup or not. All
+     should be correct.
+   - avoid recomputations in ad.
+ o array initialisation in adjoint mode:
+) pkg/mom_common/mom_calc_ke.F:
+     add full array initialisation of KE inside mom_calc_ke.F (ALLOW_AUTODIFF_TAMC):
+     The S/R which calls MOM_CALC_KE initialises KE but in some recomputation
+     part this initialisation is gone, resulting in Floating Point Exception
+     (caught by open64 compiler with debug option).
+) model/src/convective_weights.F
+     set output convectCount over the full array range (instead of doing
+     an update): this fix a similar issue when called within recomputation (adjoint)
+     which could by-pass the initialisation (normally done in the caller S/R).
+ o pkg/seaice:
+   - final version of turbulent flux params, as agreed at MIT ice meet:
+        SEAICE_mcPheePiston (default is ~ 0.000875)
+        SEAICE_mcPheeTaper (default is 0.)
+        SEAICE_frazilFrac (defualt is 1.)
+        SEAICE_mcPheeStepFunc (default is false)
+   - changes results at trunction error level
+   - ifdef SEAICE_EXTERNAL_FLUXES, disallow SEAICE_waterAlbedo
+ o added pkg/frazil:
+   - see frazil_description.tex for details
+   - verification experiment is global_with_exf/input.yearly; changes output.yearly.txt
+ o pkg/shelfice/shelfice_thermodynamics.F
+   - fix exponents for velocity dependent exchange coefficients: change
+     from 2/3(=0) to 0.66666666666666667
+   - move computation of velocity dependent exchange coefficients into
+     separate loop, so that it applies to both thermodynamics
+   - move some divisions by constants out of loops
+ checkpoint63j (2012/02/16)
+ o pkg/seaice:
+   - overhaul of seaice_summary.F after feb 2012 clean-up of seaice_growth.F etc.
+   - SItracer:  added run time params, and allow coupling to ocn salinity.
+ o pkg/seaice: remove (almost) all divisions by constants within loops
+   in seaice_growth.F and seaice_solve4temp.F, this changes (only) the cg2d
+   results of global_ocean.cs32x15.seaice from 16 to 11 digits (but only
+   those, caused by 1/QI -> recip_QI) -> update output.seaice.txt,
+   output_adm.seaice_dynmix.txt and also lab_sea: output_adm.evp.txt
+ o pkg/seaice :
+   - simplify McPhee tapering, and allow to use it with SEAICEturbFluxFormula
+     = 1 or 2, using newly added run time parameter SEAICE_availHeatTaper.
+   - fix d_AREAbyATM, d_AREAbyOCN, d_AREAbyICE diags I broke in r1.148.
+   - add permanent SItflux diag that corresponds to TFLUX but includes
+     ice+snow. Hence SItflux-TFLUX should match the ice+snow heat budget.
+   - allow activation/testing of a fix for suspected missing term in
+     ocn-ice heat budget (to be confirmed). To test this, you want to
+     undef SEAICE_DISABLE_HEATCONSFIX, and then set the run time param
+     SEAICEheatConsFix to .TRUE. that also allows the 'SIaaflux' diagnostic.
+   - no change in results, fwd or ad.
+ o global_ocean.cs32x15/results: 3 changes following from the pkg/seaice commit below:
+   - switch to variable freezing point.
+        Results change : cg2d -> 1 digits; ad -> 3-6-6 digits.
+   - bug fix : the sublimation term that was missing is now activated.
+        Results change : cg2d -> 2 digits; ad -> 8-6-6 digits.
+   - bug fix : flooding sign term for SIsal0.NE.0.
+        Result change : cg2d -> 8 digits; ad -> 11-12-9 digits.
+ o pkg/seaice:
+   - unified freezing point treatment : the old SEAICE_VARIABLE_FREEZING_POINT
+     is now the default, and the old default constant freezing point is recovered
+     with SEAICE_tempFrz0    = -1.96,
+          SEAICE_dTempFrz_dS = 0.,
+   - retire SEAICE_freeze (= the old way of specifycing the constant freezing point)
+   - remove ALLOW_SEAICE_FLOODING brackets; run time switch is already there.
+   - bug fix (thanks to M. Losch) : the sublimation term that was missing is now
+     activated. To reproduce old results with this bug define SEAICE_DISABLE_SUBLIM.
+   - bug fix (silly me) : flooding sign term (seaice_growth.F r 1.149line 1211)
+     was wrong for SIsal0.NE.0. Changes cs32x15 results (see above item for detail).
+   - bug fix (thanks to O. Jahn) : area loss for melting  got messed up in
+     seaice_growth r149 for legacy branch (no results change).
+   - introduce SEAICE_CAP_SUBLIM : caps sublimation heat flux in solve4temp (code
+     from I. Fenty).
+   - results did not change except for global_ocean.cs32x15, mostly due to the
+     switch to variable freezing point (see above item for detail).
+ o pkg/thsice:
+   - fix and simplify interface to salt_plume pkg ; diagnose directly amount of
+     seawater freezing in thsice_calc_thickn (not used).
+ o pkg/seaice: turbulent flux term specification via run time params.
+   - replace CPP switches with run time switches to facilitate testing
+   - retired CPPs : MCPHEE_OCEAN_ICE_HEAT_FLUX,
+                    GRADIENT_MIXED_LAYER_TURBULENCE_FACTOR
+   - added runtime parameter : SEAICEturbFluxFormula
+   - move Mcphee constants to SEAICE_PARAMS.h
+   - seaice_readparms.F : read turbulent flux term params (SEAICEturbFluxFormula;
+              SEAICE_availHeatFrac/Frz, or SEAICE_gamma_t/_frz if apply);
+              remove seaice_summary call (moved to seaice_init_fixed)
+   - seaice_init_fixed.F : set SEAICE_availHeatFrac/Frz depending on
+     SEAICEturbFluxFormula, and seaice_summary call (moved from seaice_readparms)
+   - seaice_summary.F : add missing report of read turbulent flux term set up
+                        and SITRACER.
+   - seaice_check.F : check range; inform and stop if retired CPPs are used
+                      (incl. SEAICE_AGE).
+   - seaice_growth.F : unified use of SEAICE_availHeatFrac/Frz, without
+          CPP switch, same computation as before for the different options.
+   - change results at the truncation level.
+ o pkg/seaice:
+   - remove un-used parameters LAD & MAX_TICE ; add new run-time parameters:
+     useMaykutSatVapPoly (default=F), postSolvTempIter (default=2) and
+     SEAICE_wetAlbTemp (default=-1e-3). Remove option SEAICE_SOLVE4TEMP_LEGACY.
+   - update verification/*/input*/data.seaice:
+     to reproduce previous results with former #defined SEAICE_SOLVE4TEMP_LEGACY
+     code, set useMaykutSatVapPoly=T & postSolvTempIter=0 ;
+     and to reproduce previous results with former non-SOLVE4TEMP_LEGACY code,
+     set SEAICE_wetAlbTemp=0 & SEAICE_snowThick=0.
+ o pkg/seaice/seaice_solve4temp.F (SOLVE4TEMP_LEGACY):
+   - remove LEGACY code for solving for tsurf (A1,A2,A3) but maintain the same
+     algorithm (same choice: useMaykutPolySatVap=T, postSolvTempIter=0);
+     difference in results only due to machine truncation.
+   - remove MAX_TICE (tsurf is always =< TMELT anyway); keep MIN_TICE if using
+     MaykutPolySatVap; keep MIN_LWDOWN.
+   - adapt SEAICE_MODIFY_GROWTH_ADJ code (untested) to non-legacy formulation.
+   - update output of verification exp. lab_sea (4 fwd: 11 cg2d digits except hb87,
+     + 3 AD: 6 digits except evp) and offline_exf_seaice.seaice (12 digits).
+ o pkg/salt_plume:
+   - isolate saltPlumeFlux array exch into a specific S/R called from
+     do_oceanic_phys.F
+   - add interface to pkg/salt_plume (filling of saltPlumeFlux) in pkg/thsice.
+ o verification:
+   - move untested set-up to MITgcm_contrib/verification_other.
+ o pkg/seaice:
+   - retire old way of SEAICE_AGE. Now replaced with ALLOW_SITRACER.
+ o pkg/seaice:
+   - seaice_solve4temp.F (keeping results unchanged):
+     * add 2 future run-time params to select which saturation vapor pressure
+       formula is used and how post-iteration fluxes are set.
+       Temporary set these 2 params according to option SOLVE4TEMP_LEGACY;
+     * New piece of code (not used) to update surf. atmos. heat flux F_ia using
+       the linearized expression to stay consistent with tsurf finding.
+   - seaice_freedrift.F avoid floating exception in sqrt(y) since y=sqrt(x*x)-x
+     can be < 0.
+ o pkg/seaice/seaice_solve4temp.F (SOLVE4TEMP_LEGACY undef):
+   - remove from F_ia (and from it's derivative dFiDTs1) the contribution of
+     conductive heat flux F_c , and add it explicitly when updating tsurf as
+     solution of: Fc = Fia + d/dT(Fia - Fc) *delta.tsurf
+     so that now F_ia has a consistent meaning through the entire routine.
+     This causes differences at truncation level: update output of fwd exp.
+     global_ocean.cs32x15.seaice.
+ o pkg/seaice:
+   - lots of editing/cleaning in seaice_solve4temp.F + better documentation
+     of arrays, sign/direction of fluxes; no effect on results.
+   - replace hard coded 273.16 (=previous value of celsius2K) by celsius2K
+     in seaice_budget_ocean.F & seaice_solve4temp.F (SOLVE4TEMP_LEGACY part);
+     note: this should have been done before changing celsius2K default.
+   - to keep results unchanged, add back old value of celsius2K in verification
+     exp. input*/data : lab_sea (AD), offline_exf_seaice (fwd+AD) & seaice_obcs
+   - replace hard coded seawater freezing temp in seaice_solve4temp.F (part
+     SOLVE4TEMP_LEGACY) of 271.20 (=previous value of celsius2K + default
+     value of SEAICE_freeze) by celsius2K+SEAICE_freeze so that seawater
+     freezing temp is consistent with value in seaice_growth.F ; this causes
+     differences at machine truncation level: update lab_sea AD output (3/4).
+ o pkg/seaice:
+   - mask (in exf_init_fixed.F) atemp,aqh,evap,precip,runoff,lwflx,areamask
+     and climsst/sss even when using seaice (to prevent calculation that might
+     use SST on land); does not affect any verification exp.
+   - apply mask to taux,tauy (in seaice_get_dynforcing.F); update output
+     of lab_sea.fd & lab_sea.hb87 and global_ocean.cs32x15.seaice_dynmix.
+ o pkg/seaice/seaice_growth.F: add mask to avoid non-zero ice thickness
+   over land (non-legacy code)
+ o vectorize salt_plume package:
+   - add extra code to salt_plume_frac and salt_plume_tendency_apply_s
+   - this code computes plumebk everywhere (also over land), thus requires
+     code to avoid divisions by zero and catch the case of kLev=Nr.
+   - efficiency of salt_plume_frac is still sub-optimal
+ o tools (genmake2):
+   - fix makefile NAME specification (option: -makefile NAME) by adding
+     "-f $MAKEFILE" in few places where it was missing including makedepend
+     command (contribution from Paul).
+ checkpoint63i (2012/01/24)
+ o model/src:
+   - add factorized versions of some EOS code to find_rho.F,
+     define USE_FACTORIZED_EOS to turn it on (default for TARGET_NEC_SX)
+ o model/src:
+   - add celsius2K to namelist PARM01; remove unused recip_rhoNil from PARAMS.h;
+   - change default celsius2K from 273.16 to 273.15
+   - to keep results unchanged, add back old value of celsius2K in verification
+     exp. input*/data : aim.5l_cs, 1D_ocean_ice_column, lab_sea (fwd),
+      global_ocean.cs32x15(seaice) & cpl_aim+ocn(input_atm).
+ o model/src: add a little initialisation trick to find_rho.F and find_alpha.F
+   to make TAF generate vectorizable code
+ o pkg/seaice/seaice_evp.F: add code (copied from CICE) that avoids underflows.
+    Turn on by defining SEAICE_EVP_ELIMINATE_UNDERFLOWS. Most compilers
+    have flags that do this more efficiently.
+ o pkg/diagnostics/diagstats_calc.F
+   - for TARGET_NEC_SX fix the treatment of the scaling factor tmpFac=scaleFact
+ o pkg/obcs (with exch2):
+   - derive OB indices in overlap region from OB-InsideMask (in obcs_init_fixed.F)
+     and remove code (in obcs_readparms.F) which was based on EXCH of indices
+     (through buffer) and did not account for exch2 (e.g., CS-grid) topology.
+ o pkg/exf and seaice exp:
+   - change offline_exf_seaice.seaicetd test exp. to use default DIFF1 value (=0)
+     so that switching off area & heff advection flags does not affect results.
+   - change default EXF_LWDOWN_WITH_EMISSIVITY to #define in EXF_OPTIONS.h
+   - keep exp. seaice_obcs & 1D_ocean_ice_column(ad) unchanged (using #undef
+     EXF_LWDOWN_WITH_EMISSIVITY) and, using pkg/exf default emissivities, update
+     results of verification experiments: 1D_ocean_ice_column(fwd),
+     global_ocean.cs32x15.seaice(fwd+ad) & seaice_dynmix(ad), lab_sea (all 8)
+     and offline_exf_seaice (all 4).
+ o pkg/seaice:
+   - remove array YNEG, RIVER, TMIX (replaced by local var) from common block;
+     remove also areaNm1 & hEffNm1 when SEAICE_GROWTH_LEGACY is undef.
+   - fix bug: areaNm1 & hEffNm1 are needed in seaice_growth (SEAICE_GROWTH_LEGACY)
+     but were not filled when resp. SEAICEadvArea=F & SEAICEadvHeff=F and
+     not multi-dim advection;
+   - fix seaice_growth.F to compile with both SEAICE_GROWTH_LEGACY and
+     SHORTWAVE_HEATING #undef.
+ o optim: make Makefile more robust (?)
+ o pkg/obcs:
+   * fix treatment of obcs_read_pickup for TAF
+ o pkg/shelfice:
+   * add missing initialisation of num_shifwflx
+   * new adjoint verification exp. for isomip
+   * change Prandtl and Schmidt numbers from generic formulations
+     (in terms of model diffus. and visc.) to separate runtime
+     parameters, with Holland and Jenkins (1999) default values.
+ o pkg/exf (interpolation):
+   - extended input field (2 rows) near the N & S poles:
+     * fill in with the symetric value (when even Nb of data in longitude)
+     * add average value at the poles only for scalar quantities ; for vector
+       component interpolation, skip the averaging and keep duplicated values,
+       unless the 2 components have same location (uvInterp=T) in which case
+       interpolate the 2 components together using S/R EXF_INTERP_UV.
+   - new S/R EXF_INTERP_UV to interpolate the 2 components of a vector field
+     together: this allows to account properly for local orientation when
+     averaging at N & S pole.
+   - add CPP option EXF_USE_OLD_INTERP_POLE to recover old results regarding
+     exf-interpolation near N & S poles. Undef by default.
+   - add debug check/print on 1rst iter if debugLevel >=2.
+ o pkg/exf:
+   - change masking flags definition (no longer "parameter"), put them in
+     common block and set them in S/R EXF_INIT_FIXED.
+   - change recognized masking flag from s,u,v to c,w,s since the mask
+     to use (maskC,W,S) depends on position on model grid and has little to
+     do with scalar/vector difference; fix masking if using P-coordinates.
+   - fix masking of wind-stress (was wrong if interpolated or read on A-grid)
+     and update results of exp. global_with_exf (x2).
+   - fix setting of zenith-angle table when SHORTWAVE_HEATING is undef.
+ o pkg/obcs
+   - S/R obcs_calc_stevens: fix a small bug (gammat -> gammas where appropriate)
+ o pkg/exf (interpolation):
+   - assume periodicity in X only if input field cover full longitude range.
+   - improve search for lat. index (supposed to be faster, in ~log2(ny) steps,
+     and should vectorise).
+   - fix input lat of the 2 added row (in case we provide N.pole data).
+ checkpoint63h (2011/12/30)
+ o pkg/seaice:
+   - change declaration of UVM from _RL to _RS in order to get B-grid
+     uIce,vIce monitor when _RS = real*4
+ o pkg/offline:
+   - new S/R OFFLINE_RESET_PARMS for resetting main-model params (switch off flags);
+   - compute vertical velocity if not read from file (switch on exactConserv
+     & staggerTimeStep);
+   - fix output of ptracer monitor iter & time for default PTRACERS_monitorFreq.
+ o verification:
+   - update grid-files (in tutorial_held_suarez_cs/input and fizhi-cs-32x32x40/input)
+     with grid-angle generated using "utils/matlab/cs_grid/cubeCalcAngle.m":
+     fix Pb in yG definition @ 2 missing corners (previously yG was averaged);
+   - update output of exp. global_ocean.cs32x15.viscA4 after changing
+     grid-file angles (used here for coriolis-3d);
+   - remove (or gzip) few files not needed to run fizhi-cs experiments.
+ o pkg/exf (vector interpolation):
+   - rotate vector component toward local grid-axis orientation using grid-angles
+     (stored in GRID.h) instead of locally computed rotation angle; keep old code
+     available with exf option EXF_USE_OLD_VEC_ROTATION (undef by default).
+ o pkg/seaice:
+   - allow to compile with exf options ALLOW_ATM_TEMP or ALLOW_DOWNWARD_RADIATION
+     undefined. Fix and remove the stop when ALLOW_RUNOFF is undefined.
+ o pkg/PKG_OPTIONS.h files:
+   - move #include "CPP_OPTIONS.h" just after #include "PACKAGES_CONFIG.h",
+     outside of the #ifdef ALLOW_THISPKG / #endif block.
+   - update verification/*/code/PKG_OPTIONS.h files.
+ o add a verification experiment (offline_exf_seaice/input.seaice) that test
+   the B-grid LSOR solver
+ o pkg/seaice: sort out emissivity and long wave radiation step 2:
+   - add emissivity for snow and ice as new run-time parameters
+     (unfortunately) that default to the corresponding exf values; this
+     changes results in most verification experiments so that for backward
+     compatibility these parameter have to be set explicitly to inconsistent
+     values (ugly);
+   - the exf-flag EXF_LWDOWN_WITH_EMISSIVITY then gets rid off the hard-wired
+     emissivities of 0.97 associated with lwdownloc in S/R seaice_solve4temp
+     until we agree how to handle this bug properly
+ o pkg/exf (interpolation):
+   - add a set of run-time param ({inputfield}_interpMethod), one for
+     each interpolated input field, to select the interpolation method
+     with a value of zero switching off the interpolation;
+   - print interpolation parameters to standard output;
+   - refine exf_check.F accordingly ; stop if USE_NO_INTERP_RUNOFF is defined
+     (to use instead runoff_interpMethod=0 in data.exf).
+   - simplify default setting of interpolation parameters (for all fields,
+     set position to match model grid cell-center position, leading to trivial
+     interpolation in case of regular Lat-Lon grid) and fix for the case of
+     non-uniform delY.
+ o pkg/exf/exf_radiation.F: add the factor ocean_emissivity to lwdown, for
+    within #ifdef EXF_LWDOWN_WITH_EMISSIVITY/#endif. Unless ocean_emissivity=1.
+    this factor is absolutely required, because the lw exitance (= out-going
+    long wave radiation) is emissivity*stefanBoltzmann*T^4 + rho*lwdown,
+    where the reflectivity rho = 1-emissivity for conservation reasons. Once
+    this is established, we can remove the CPP-Flag (if we want to).
+ o pkg/seaice:
+   - qualify a stop statement in S/R seaice_check: EXF_READ_EVAP and
+     ALLOW_BULKFORMULAE are only required if SEAICE_EXTERNAL_FLUXES is defined
+   - sort out emissivity and long wave radiation, step 1: make SEAICE_emissivity
+     what the name implies (and not emissivity*BoltzmannConstant), this means
+     the old default value of 5.5e-8 now means
+.5e-8/5.670e-8 = 0.97001763668430343479 as ocean_emissivity in
+     S/R exf_readparms
+   - FV-discretization of the B-grid LSOR solver, turn on with
+     SEAICE_LSRBNEW. This new solver also involves a slight re-organization
+     of the calling routine dynsolver, so that B and C-grid code look a
+     little more alike.
+   - fix index bugs in ostres.F (B-grid code)
+ o pkg/seaice/seaice_ocean_budget.F: change (unused) code to make it look better
+ o pkg/seaice/seaice_readparms.F: make ocean_emissivity*stefanBoltzmann the
+   default for SEAICE_emissivity, if useEXF; requires setting a wrong
+   parameter value in global_ocean.cs32x15/input.seaice/data.seaice for
+   backward compatiblity
+ o model/src: use sigmaR in calc_ivdc
+ checkpoint63g (2011/12/16)
+ o pkg/seaice/seaice_growth.F:
+   fix heat conservation of the coupled ocean-seaice system.
+   when SEAICE_HEAT_CONSERV_FIX is defined, the mismatch of
+   solid vs liquid water treatment is resolved via QNET.
+ o pkg/seaice/seaice_growth.F:
+   add missing term for sublimation in saltFlux, which was breaking conservation.
+ o pkg/seaice/seaice_model.F:
+   Remove this patholigical case treatment in evolution branch,
+   where it is un-necessary and breaks conservation.
+   Update global_ocean.cs32x15/results accordingly for
+   output.seaice.txt output_adm.seaice.txt and output_adm.seaice_dynmix.txt
+ o model/src:
+   useRealFreshWaterFlux: remove masking of EmPmP (using maskInC) in
+   external_forcing_surf.F and apply mask directly in S/R SOLVE_FOR_PRESSURE.
+ o pkg/obcs:
+   modify Stevens boundary conditions so that S/R obcs_calc_stevens computes
+   tendency for temperature and salinity that is then applied to update
+   theta and salt in S/R obcs_apply_ts; this requires proper masking of all
+   horizontal advection and diffusion contributions on the boundary (in
+   S/Rs gad_advection, gad_calc_rhs, gmredi_rtransport, gmredi_calc_diff), and
+   removing the mask in S/R timestep_tracer. The advantage of this approach is
+   that the updated tracer values include contributions from the surface
+   forcing and vertical diffusion.
+   This modification changes exp4.stevens because of vertical diffusion.
+ o model/src:
+   change non-curvilinear grid setting to also work with exch2 + blank tiles:
+   - move delX,delY to new header file (SET_GRID.h) and adjust length to 1rst
+     face dimensions.
+   - new S/R INI_LOCAL_GRID to define model tile-local grid (using same units
+     as delX,delY) and called from S/R INI_CARTESIAN_GRID, INI_CYLINDER_GRID
+     and INI_SPHERICAL_POLAR_GRID.
+   change test-experiment global_ocean.90x40x15:
+   - split the domain in many more tiles (9x4 tiles of 10x10 each);
+   - switch to exch2 and remove 1 blank-tile (but only for MPI test).
+   - update results of both test (std & dwnslp).
+ o pkg/diagnostics/diagstat_calc.F: fix problem with non-initialised halos in
+    tmp-fields for TARGET_NEC_SX at the cost of extra loops and less vectorisation
+ o model/src:
+   - take sigma-coords related code out of update_etah.F into new S/R UPDATE_ETAWS
+     and fix initialisation when using sigma-coords.
+ o model/src:
+  - improve Gael's changes from Jan 14, 2011 "addition of an 'update' of hfacc etc.
+    to their current value at the beginning of forward_step.F": add a new run-time
+    switch "doResetHFactors" (default=false) and use it to do (or not) the resetting.
+  - set doResetHFactors=T in the following test exp:
+     global_ocean.90x40x15/input (rStar) & input.dwnslp (linFS),
+     global_ocean.cs32x15/input.seaice (rStar), hs94.cs-32x32x5/input.impIGW (linFS)
+     and tutorial_global_oce_in_p (nonLinFS in p)
+ o pkg/ecco
+   - added IES cost term
+ o verification/advect_xz
+   - scale down the depth by 1/100 (from 200 km to just 2.km)
+   - add secondary test using divergent flow, r-star and implicit vertical advection.
+   - add note (check_conserve_TS.txt) and matlab script to check global
+     conservation of T & S with NonLin-FreeSurf and Adams-Bashforth.
+ o pkg/rbcs:
+   - add missing relaxUFile & relaxVFile in namelist (in rbcs_readparms.F).
+ o pkg/obcs (Stevens BCs):
+   - fix various problems in the phase speed computations of the Stevens
+     boundary conditions:
+     - sign error for western and southern boundaries,
+     - time tendencies were underestimated by factor of dTracerLev and some just
+       zero (for multidim advection schemes) -> now estimate time tendencies
+       from difference between previous (n) time level and the one before (n-1);
+       this requires storing a field per tracer per boundary, also in the pickup
+       files.
+     - replace deltaTmom in cflMer/Zon computation with dTracerLev
+     - set default phase velocity to cflMer/Zon
+   - update verification experiment exp4.stevens
+ o pkg/generic_advdiff (implicit_r):
+   - fix implicit vertical advection conservation with AB and/or NonLin-FreeSurf
+     (remove Tr*d/dz(w) in gad_implicit_r.F and add it in gad_calc_rhs.F);
+   - fix implicit vertical diffusion or advection with NonLin FreeSurf
+     (was using current recip_hFacC instead of future recip_hFacC): set future
+     recip_hFac in thermodynamics.F and pass & use it in all vertical implicit
+     solver S/R ;
+   - fill diagnostics of vertical advective fluxes (computed from tendency)
+     when using implicit vert. advection;
+   - update output of exp that uses NonLin-FreeSurf & implicit vertical diffusion:
+      global_ocean.90x40x15 (fwd+AD), global_ocean.cs32x15 (4 fwd +4 AD),
+      tutorial_global_oce_in_p (fwd), tutorial_tracer_adjsens (AD)
+      and cpl_aim+ocn (used in ocean); to be fixed: bottom_ctrl_5x5.
+ o pkg/diagnostics:
+   - add diags for T & S tendency which goes through Adams-Bashforth.
+ checkpoint63f (2011/11/30)
+ o pkg/obcs/obcs_calc_stevens.F:
+   - join some loops to reduce number of if-statements
+   - fix a bug in code for northern and southern boundaries.
+ o pkg/seaice/seaice_init_varia.F
+   - undo resetting UVM=0 that has slipped in unnoticed in r1.49 and
+     caused zero ice-velocities for the B-grid code
+ o pkg/seaice/seaice_init_fixed.F
+   - fix a bug in the initialisation of the second metric terms
+     k2AtC and k2AtZ: k2AtC was set to the value of k2AtZ and k2AtZ was 0.
+   - this affects all seaice configurations with useCurviLinearGrid = .true.
+     and SEAICEuseDynamics = .true. (default) and SEAICEuseMetricTerms
+     = .true. (default)
+   - the only verification experiment affected is global_ocean.cs32x15:
+     icedyn, seaice, and seaice_dynmix (AD)
+ o pkg/thsice/thsice_diagnostics_state.F
+   - only for TARGET_NEC_SX: initialise all of tmpFld, so that overlap does
+     not contain garbage that can lead to surprises in diagstats_calc.F
+ o model/src:
+   - move bi,bj loops inside INTEGR_CONTINUITY ;
+   - call INTEGR_CONTINUITY directly from forward_step.F
+     (previously called from momentum_correction_step.F)
+   - call UPDATE_ETAH from integr_continuity.F and update initialise_varia.F,
+     forward_step.F and pkg/ecco/the_main_loop.F
+ o model/src/do_oceanic_phys.F:
+   - reset addMass to zero only if useICEFRONT ;
+   - separated k-loop for rhoInSitu calculation ;
+   - add 2 diagnostics for wVel*delta^k(Rho) at constant pressure (= WdRHO_P)
+     and at constant T,S (= WdRHOdP);
+   NOTE: change diagnostics WRHOMASS : this is now simply the Vertical transport
+     of In-Situ Density (Anomaly) (=wVel*rho^bar-k) (previously was Vertical
+     transport of locally-referenced potential density);
+     to recover old diag: (WRHOMASS)_old = (WRHOMASS)_new -1/2 * (WdRHOdP)
+ o gluemnc:
+   - replace ncrcat with ncks when adding variables to *.glob.nc
+   - change the way variables without record dimensions are handled so that
+     files that have variables with and without record variables can be glued:
+     add a record dimension with a new unique name to be able to differentiate
+     between variable with and without a-prior record dimensions. Remove
+     this record dimension before adding the variable to the *.glob.nc file.
+     This procedure automatically works also for grid.*.nc files that do not
+     have any record dimension.
+ o verification/cpl_aim+ocn:
+   - generate new reference output on baudelaire (gfortran, mpich2) (previously
+     from old aces-grid cluster, ao + ifort) and update 'run_cpl_test' script.
+ o pkg/obcs/obcs_calc_stevens.F:
+   - add code for northern and southern boundaries.
+   - reorder some loops to save some operations and so that drFBar can be scalar
+ o model/src:
+   - re-arrange extrapolation calculation in Adams-Bashforth S/R (affects machine
+     truncation) and add diagnostics for Adams-Bashforth tendency increment.
+   - update test-exp. AD output:
+D_ocean_ice_column, bottom_ctrl_5x5, lab_sea.noseaicedyn, obcs_ctrl;
+   and FWD output: exp4 (x3), fizhi-cs-32x32x40, fizhi-cs-aqualev20,
+     front_relax (x3), global_ocean.90x40x15 (x2), global_ocean.cs32x15 (x5),
+     global_ocean_ebm, ideal_2D_oce, internal_wave, isomip (x3), lab_sea (x4),
+     matrix_example, MLAdjust (x5), natl_box (x2), tutorial_advection_in_gyre,
+     tutorial_global_oce_in_p, tutorial_global_oce_latlon and
+     tutorial_plume_on_slope.
+ o pkg/diagnostics/diagstats_calc.F: add special code for TARGET_NEC_SX
+   that vectorises. This code uses 3 extra 2D fields, F90 array assignments
+   and F90 intrinsic routines SUM, MINVAL, MAXVAL, but since TARGET_NEC_SX
+   does not even come with an F77 compiler anymore, this should not be
+   a limitation
+ checkpoint63e (2011/11/06)
+ o pkg/seaice adjoint of LSR:
+   - substantially rework STORE dirs.
+   - add new flag SEAICE_LSR_ADJOINT_ITER and parameter SOLV_MAX_FIXED
+     this flag will do SOLV_MAX_ITERS but only store SOLV_MAX_FIXED fields
+     and only perform SOLV_MAX_FIXED adjoint iters.
+     If flag SEAICE_LSR_ADJOINT_ITER is undef-ined, the store in the iteration
+     always goes to same record, meaning that the last forward field will be
+     the one used in the adjoint - an approximation.
+   - now produces non-zero LSR-related gradients, and acceptable gradients for
+     An's zonal (x-z) test case (to be checked in)
+   - lab_sea: produces acceptable gradients for lab_sea with forward/backward LSR
+     (but these are screwed up by the thermodynamics in the first place);
+     reduce from 4 to 3 timesteps to avoid t.d. issue as temporary solution;
+     output_adm.txt also reflects changes to seaice_lsr
+   - global_ocean.cs32x15:
+     * the "default" input_ad.seaice has been re-defined to always exclude dynamics
+       (output_adm.seaice.txt was updated)
+     * new input_ad.seaice_dynmix tests a forward LSR / backward free-drift
+       (output_adm.seaice_dynmix.txt)
+ o test-exp. exp4+stevens:
+   - switch off pTracers and nonHydrostatic (restart problems with NH); update output
+ o pkg/seaice (lsr solver):
+   - put coriolis term into FORCEX,Y (as in seaice_evp.F; previously in rhsU,V only);
+     update output (change truncation) of FWD test exp lab_sea & global_ocean.cs32x15
+   - fix SEAICEuseFREEDRIFT for new OBCS version (ndef OBCS_UVICE_OLD)
+   - new parameter "LSR_mixIniGuess" allows (if=2,4) to mix free-drift solution
+     into initial guess for linearised solver; use weight ~ (1/err)^2,4.
+   - compute (with new S/R) and print initial (+ free-driff sol. if available)
+     and final residual of linearised system.
+ o pkg/pp81: add diagnostics for vertical eddy viscosity and diffusivity
+   (requires new subroutines pp81_init_fixed.F/pp81_diagnostics_init.F)
+ o pkg/obcs: Stevens BCs (still only for east and west)
+   - fix Stevens BCs by using intermediate velocities of previous
+     time step as "baroclinic" contribution rather velocity of one grid cell
+     inside the boundaries; more consistent but makes the entire treatment
+     more complicated, requires new pickup files and two new S/Rs:
+     obcs_copy_uv_n and obcs_save_uv_n
+     keep old version with flag OBCS_STEVENS_USE_INTERIOR_VELOCITY
+     (undefined by default)
+   - silently move computation of some grid factors into separate loops to
+     save some recomputations
+   - add a hack for non-linear free surface
+   - add a verification experiment to exp4 that tests this code
+ o make gluemnc/xplodemnc work with (moron) non-GNU shell tools
+ checkpoint63d (2011/10/25)
+ o pkg/obcs + seaice-dynamics:
+   - new implementation calls OBCS_APPLY_UVICE (in seaice_dynsolver.F) before
+     solving for uIce,vIce and prevent SEAICE_LSR or SEAICE_EVP to modify OB
+     values (consistent with an implicit method).
+   - add option OBCS_UVICE_OLD (in OBCS_OPTIONS.h, defined by default) to
+     return to older implementation (same results as before); note that none of
+     the "experimental" OBCS_SEAICE options are implemented in the new version.
+   - switch test exp. seaice_obcs to use new version (update output).
+ o pkg/seaice:
+   - add few stop (B-grid & CS-exch, B-grid & obcs, AUTODIFF & SEAICE_maskRHS)
+   - add parenthesis in Water-Ice drag calculations (evp & lsr);
+   - in seaice_lsr.F, simplify and fix AA3 setting in case sNx or sNy=1;
+     and fix case SEAICE_waterDrag=0 (but unstable if no or little seaice)
+   - update output of test exp lab_sea that uses evp or lsr (fwd+ad)
+     and global_ocean.cs32x15 (icedyn & seaice fwd+ad).
+ o pkg/layers:
+   - Include potential density as new coordinate (Thanks to David Munday)
+ o pkg/dic:
+   - Remove subroutine CALC_PCO2_APPROX_CO3 from carbon_chem.F and add
+     carbonate computation/output to CALC_PCO2_APPROX
+ o pkg/generic_advdiff
+   - make TAF generate code that vectorizes:
+     gad_dst3fl_adv_*.F, gad_u3c4_impl_r.F
+ o model/src:
+   - improve vectorization also for adjoint code of
+     solve_tridiagonal and solve_pentadiagonal. As this requires up to
+new 3D-fields, this code is only turned on for the combination of
+     ALLOW_AUTODIFF_TAMC and TARGET_NEC_SX. Also remove error message
+     for singular matrix check (only for TARGET_NEC_SX).
+   - remove hard-wiring of CPP-flag ALLOW_SOLVERS_KLOOPINSIDE to
+     ALLOW_AUTODIFF. This flag now needs to be set outside of
+     solve_tri/pentadiagonal.F
+ o pkg/exf:
+   - fix previous modif in exf_readparms.F (revision 1.66: treatment of
+     optional namelist EXF_NML_OBCS).
+   - add many debug-print (to trace down where pkg/cal error msg comes from)
+ o pkg/mom_vecinv/mom_vi_hdissip.F
+   - rearrange loops so that vectorization is improved and in particular
+     the adjoint routine vectorizes. The code is a little longer now, but I
+     think easier to read.
+     Note: CPP-flag MOM_VI_ORIGINAL_VISCA4 is not tested.
+ o pkg/seaice:
+   - allow to specify initial seaice velocity from files (uIceFile,vIceFile)
+ o pkg/exch2:
+   - alternative code (without tile x tile matrix) for cumulated (global) sum;
+     used as default; keep using matrix version in adjustment.cs-32x32x1.
+ o tools/build_options:
+   - after merging some MPI and/or multi-threads specific optfiles so that
+     the modified default optfile support both built (using genmake2 -mpi
+     for the MPI built, using genmake2 -omp for OpenMP built),
+     move now obsolete optfiles to tools/build_options/unsupported/
+    (add copy of email sent to support list in doc/optfiles_changes.txt)
+ checkpoint63c (2011/09/28)
+ o pkg/ebm:
+   - fix ebm_zonalmean.F for several procs in Ydir (nPy > 1); update output of
+     test exp. global_ocean_ebm (affects machine truncation, 12 digits for cg2d)
+ o pkg/seaice (SItracer pickup)
+ * Simple code for pickup of SItracer fields (#define ALLOW_SITRACER)
+   To be done:
+   - thorough testing of missing fields in S/R seaice_read_pickup
+   - thorough matching between generic tracers and specific fields used
+     (e.g. volume-weighted age, area-weighted age, salinity, ...)
+ o pkg/grdchk:
+   - all procs calculate and print finite-difference gradient (for testreport)
+   - change description output used by testreport;
+   - AD testing: also compare and report Finite-difference gradient;
+     => update all output_adm*.txt
+ o test exp. global_ocean_ebm:
+   - switch back useRealFreshWaterFlux (no problem anymore with run-off);
+     and turn on exactConserve; update (fwd) output.
+ o pkg/seaice (LSR):
+   - print to STDOUT number of solver iterations at SEAICE_monFreq interval.
+   - modify solver to deal cleanly with u/v switch at face edges (CS-grid):
+     * identical results with non-CS topology (but save up to half of EXCH calls)
+     * no much changes in cs-32 verification tests since no ice at face edges
+      (differences due to convergence criteria, since nb of iterations changed)
+     * expect some differences on lat-lon-cap grid.
+     update FWD results of global_ocean.cs32x15 test exp. (icedyn & seaice)
+ o pkg/exch2:
+   - add new CPP option to disable Cumul-Sum matrix (to save storage when using
+     many tiles); until alternative coding is added, just add a stop.
+ o pkg/kpp:
+   - move ptracer/salt correction to KPP diffusivity from calc_3d_diffusivity.F
+     to S/R KPP_CALC_DIFF_PTR (+ add tracer-index to argument list).
+ o optfiles:
+   - merged few MPI specific (*+mpi*) and multi-threads specific (*+mth) optfiles
+     into corresponding standard one, which now support different build:
+     (when using "genmake2 -mpi" for MPI built, "genmake2 -omp" for OpenMP built)
+   - add "darwin_amd64_gfortran" optfile (initially from Constantinos, tested by Gael)
+ o pkg/obcs (seaice):
+   - add missing EXCH for uIce,vIce after applying OBCS;
+   - remove S/R EXF_SWAPFFIELDS_X/Y , disable S/R EXF_SET_OBCS_X/Y by adding
+     argument = number of levels to S/R EXF_SWAPFFIELDS_XZ/YZ and S/R
+     EXF_SET_OBCS_XZ/YZ ; update obcs_exf_load.F;
+   - fix EXF_SET_OBCS_XZ/YZ for multi-threaded (assuming loaded arrays are shared)
+   - verification exp. seaice_obcs: split domain in 2 tiles ; add SIZE.h_mpi
+     and eedata.mth for MPI and mutlti-threaded testing.
+ o pkg/flt:
+   - make FLT EXCH working with multi-threads (and MPI + multi-threads);
+   - use buffer for floats IO (trajectories & profiles); size set in FLT_SIZE.h;
+   - fix pickup and trajectories + profiles output with multi-threads;
+   - add parameter to select group of fields to write along trajectory and
+     profile (default unchanged);
+   - only call PORT_RAND* function when flt_noise <> 0;
+   - add multi-threaded test for verification exp. flt_example.
+ o eesupp/src:
+   - fix S/R ALL_PROC_DIE for MPI+multi-threads.
+   - USE_OMP_THREADING: check that number of threads (from eedata) matches
+     actual number (from env.var. setting).
+ o pkg/ebm:
+   - fix multi-threading in ebm_area_t.F ; clean-up EBM.h header file.
+   - add multi-threaded test for verification exp. global_ocean_ebm
+ checkpoint63b (2011/08/29)
+ o pkg/ebm:
+   - fix sign of runoff;
+   - update directly forcing fields (Qnet,EmPmR) to use standard
+     external_forcing_surf.F (remove ebm_forcing_surf.F);
+   - avoid loading forcing fields a 2nd time (1rst time from ini_forcing.F);
+   - set either tauThetaClimRelax (in data) or tauThetaZonRelax (in data.ebm)
+     and apply relaxation towards corresponding SST field (2-D map or ZonAver).
+   - update global_ocean_ebm parameters file data and update output (fwd+ad).
+ o verification/matrix_example:
+   - split domain in 8 tiles (2x4); add SIZE.h_mpi and eedata.mth for
+     MPI and mutlti-threaded testing.
+ o pkg/matrix:
+   - change name of S/R MATRIX_INIT to S/R MATRIX_INIT_VARIA ;
+   - fix for multi-tiles (add bi,bj indices to exp/impMatrixCounter);
+   - fix for multi-threaded (remove DATA statement);
+   - use standard DIFFERENT_MULTIPLE function;
+   - add MATRIX_OPTIONS.h
+ o verification/matrix_example:
+    To allow to split the domain in several tiles, change the domain size
+     from 31x31 to 32x32 by adding 1 row (on Southern side) + 1 column (on
+     Western side) of land points.
+ o (*_)write_pickup:
+   - fix few bugs in mypackage_read/write_pickup.F
+   - in MDS_WR_METAFILES calls, replace "myTime" by a local copy into
+     array of length 1 (was caught by compiler syntax-check).
+ o pkg/diagnostics (velocity potential solver):
+   - fix initialisation of main diagonal matrix (for overlap values)
+ o tools/build_options:
+   - towards single optfile for MPI and non-MPI built: merge few +mpi optfile
+     into previously non MPI one (linux_am64 pgf77,open64,pathf90,ifort11)
+   - linux_amd64_gfortran: merge +mpi_generic version into standard optfile:
+     * move IEEE flags to DEVEL section; take IEEE flags from +mpi_generic ;
+     * FAST case: for now, keep -O3 with ini_masks_etc.F in NOOPTFILES list;
+     and use "-devel" testreport option for standard testing on baudelaire.
+ o pkg/grdchk:
+   - Assume that all gradient-check position are within the same tile
+     corresponding to global indices (iGloTile,jGloTile) and that
+     positions (i,j indices or nbeg) are local to this tile;
+   - set tile local-indices and proc. number according to tile global-indices;
+   - remove grdchkwhichproc from namelist (retired param);
+   - send adjoint gradient to all procs so that all procs print it to STDOUT;
+   - switch on MPI test for global_ocean.90x40x15 AD test experiment.
+ o adding package bbl (Bottom Boundary Layer)
+   description in MITgcm/pkg/bbl/bbl_description.tex
+   example/test experiment in MITgcm_contrib/bbl
+ o adjoint verifications
+   - changed 5 experiments to multi-tiles
+     * global_ocean.90x40x15
+     * obcs_ctrl
+     * offline_exf_seaice
+     * tutorial_dic_adjoffline
+     * tutorial_tracer_adjsens
+     changed reference output for those that crossed tile boundaries
+     (changed choices of gradient check positions)
+   - with same tiling, switch on MPI test for the last 4 (add SIZE.h_mpi)
+   - temporary bug fix in grdchk_loc.F for obcs
+ o genmake2 & testreport
+   - add target "obj" (just for OBJFILES files) to Makefile;
+   - add option to specify FEXTRAFLAGS on command line.
+ o pkg/mypackage:
+   - remove bi,bj arguments from argument list of S/R MYPACKAGE_CALC_RHS
+ checkpoint63a (2011/08/02)
+ o pkg/diagnostics (velocity potential):
+   - fix velocity-potential calculation when using OBCS: balance net inflow
+     at each level (new S/R OBCS_DIAG_BALANCE).
+   - fix some of the problems with OBCS in stream-function calculation.
+ o pkg/exf/exf_readparms.F
+   - make treatment of optional namelists (EXF_NML_04, EXF_NML_SGRUNOFF,
+     EXF_NML_OBCS) more consistent, so that you need not have these lists
+     in data.exf when they are not used.
+ o optim/optim_readdata.F:
+   - add some output about obcs variables that might help debugging
+   - add a check about nvarlength
+ o pkg/ctrl: once again, fix computation of endrec in s/r ctrl_init_rec
+ o pkg/diagnostics (velocity potential):
+   - fix mask for OBCS (still problems in stream-function with OBCS);
+   - add specific parameter (default = main code CG2D params) for solver;
+   - in case of poor convergence, use solution corresponding to lowest residual.
+ o pkg/seaice/seaice_growth.F: small changes that permit vectorizable
+   adjoint code. In general statements like tmpscal=fld(i,j) are problematic
+   and should be avoided where possible.
+ o model/src (rStar):
+   - include r* effect on reference-state (PhiRef) in totPhiHyd
+     (so that it's really the potential anomaly at the cell center);
+     affect solution only if z* with full pressure in EOS.
+   - test-exp global_ocean.90x40x15: reduce viscA4 (was not stable) and
+     update output (because of z* in totPhiHyd and viscA4 changes);
+   - keep the previous diagnostics as "PHIHYDcR" (closer to potential anomaly
+     @ constant r) until interpolation at constant r is implemented.
+ o pkg/diagnostics
+   - fix RCENTER diagnostics in case cell center is not at interface middle
+ o add code for TEOS-10 (www.teos-10.org, McDougall et al. 2011). Use
+   this eos with eosType = 'TEOS10', in data (PARM01). This eos implies
+   that THETA and SALT are "conservative temperature" and "absolute
+   salinity"
+ o pkg/ctrl
+   - fix computation of endrec in s/r ctrl_init_rec
+   - ctrl_pack/unpack_*: remove unused variables and some obsolete code
+ o pkg/seaice/seaice_growth.F
+   - fix recomputation with FENTY_AREA_EXPANSION_CONTRACTION code,
+     remove then obsolete STORE directives
+   - fix STORE directives for tice and tices, so that only the
+     appropriate part of the fields are stored (and not the entire
+     field); update global_ocean.cs32x15.seaice AD output.
+   - cosmetic changes: adjust CPP flags and indentation for better
+     legibilty
+ o pkg/autodiff: add mnc-output of adBottomDragFld (code contributed by
+   Chris Wilson)
+ o pkg/gmredi:
+    Add Sub-Meso Eddies parameterisation from Baylor (for now, disabled with TAF),
+    and test it in verification exp. "front_relax.bvp" (update output.bvp.txt)
+ checkpoint63  (2011/07/11)
+ o pkg/exch2:
+  - rename+move: nTiles in W2_EXCH2_PARAMS.h --> exch2_nTiles in W2_EXCH2_TOPOLOGY.h
+  - exch2 version of Cumul-Sum routine: S/R W2_SET_MAP_CUMSUM set up the
+    (2*nTiles)x(nTiles) Cumul-Sum matrix and Master Proc collects all tiles X,Y
+    increments, calculates Cumul-Sum @ tile origin and sends results to each tile.
+ o pkg/diagnostics:
+  - deal with pairs of post-processed diags which are computed together; in
+    particular, re-order list of diags within 1 file to save 2nd computation.
+  - add S/R to compute velocity stream-function (called after velocity-potential
+    calculation) from divergence free transport -> new diagnostics "PsiVEL".
+  - add parameter to select grid-point location where PsiVEL == 0.
+ o eesupp/src:
+    new S/R to calculate cumulated sum on tiled array, corner grid-cell location
+    (specific S/R needed with exch2 topology - for now, just print an error msg)
+ o pkg/shelfice
+  - Implement friction velocity-dependent transfer coefficients following
+    Holland and Jenkins, JPO, 1999
+    Original code by M. Losch with small modifs.
+    Enable with CPP option SHI_ALLOW_GAMMAFRICT
+    and runtime flag SHELFICEuseGammaFrict
+ o verification lab_sea & global_ocean.cs32x15:
+  - use tools/xmakedepend (instead of cyrus_makedepend, in genmake_local):
+    does not miss some dependencies (but is slower) and also works with many files
+    (default makedepend limitation for AD built).
+  - use cyrus_makedepend in adjustment.128x64x1 (so that it still tested).
+ o pkg/diagnostics:
+  - add run-time parameter "useMissingValue" (def=False) to fill land-point
+     (i.e., where mask=0) with MissingValue ; used only in MNC output file.
+    This replaces CPP-option DIAGNOSTICS_MISSING_VALUE.
+  - Extend the use of "missing_value" setting from data.diagnostics for the case
+    of counter-diagnostics (where fraction-weight is zero). This applies both to
+    MNC and MDS output files.
+ o pkg/seaice/seaice_growth.F:
+   - add 'a priori' cap of latent heat flux based on actual mass considerations
+     when SEAICE_ADD_SUBLIMATION_TO_FWBUDGET is used in conjunction with the
+     non-legacy seaice_solve4temp.
+   - add diagnostic of the residual sublimation freshwater flux (the freshwater
+     flux taken from the ocean if the total actual latent heat fluxes exceed
+     the maximum)
+   - remove the CPP switch around the *_FWbySublim unit change and move diagnostic
+    fill for SIatmQnt, SIfwSubl, SIatmFW to the end of seaice_growth.F.
+   - add diagnostic of the actual sublimation freshwater flux (that is 0. ifndef
+    SEAICE_ADD_SUBLIMATION_TO_FWBUDGET) and of the latent heat flux (evap+sublim).
+   - bug fix : frWtrAtm needs a_FWbySublim ifdef SEAICE_ADD_SUBLIMATION_TO_FWBUDGET.
+   - bug fix : missing part to Martin's r_FWbySublim pathological case fix.
+ o verification 1D_ocean_ice_column:
+    made model domain truly 1x1x23 instead of 5x5x23 with only center cell (3,3,:) wet
+    update results
+ o pkg/diagnostics:
+  - Implement setting of "Post-Processed" diagnostics (corresponding to gdiag(5)='P')
+    which are not filled-up but computed from other diags ; In this case, the mate
+    diag points to the primary (filled-up) diag to used for post processing.
+  - Update Velocity-potential computation using post-processed diag framework.
+  ==> Change the ordering of fields and time-periods in MDS output file
+    when using periodic averaging: now writes one time record with the full set
+    of fields for this time period, then the next time reccord (it used to be
+    one field with the full set of time records then the next field).
+      Note: this is now similar to NetCDF (MNC) output file. <==
+ checkpoint62z (2011/06/21)
+ o adjoint monitor:
+  - Add adjoint monitor output for packages exf, seaice
+    and update relevant testreport output
+ o pkg/seaice:
+  - re-order diags inits so that they appear in order in available_diagnostics.log
+  - added diags: hsnow thermo. rates of change, area preceeding ridiging process,
+    area/heff/hsnow preceeding thermodynamic growth/melt.
+  - modified diag: SIdA; output actual effect, as the description states.
+  - modified description: SIqneti, SIqneto, SIuheff, SIvheff, SIdAb*, HSNOW.
+  - retired redundant diags: SIyneg, SIfice, SIsnwice, SIthdgrh.
+    (SIyneg->SIdHbOCN; SIfice->SIdHbATC; SIsnwice->SIdHbFLO;
+     and SIthdgrh->SIdHbOCN+SIdHbATC+SIdHbATO)
+  - modified diags (2) : switch all SIdA*, SIdH*, SIdS* from delta to rates.
+  - added diagnostics for seaice generic tracers (SItr*).
+  - added SItrUnit and SItrNameLong run time param (for SItr* diags).
+  - in diag names, replaced 'PrTh' abbrev. of 'preceeding thermo' with 'PT'.
+  I. Fenty: 18-Jun-2011:
+  Minor changes to seaice package:
+) Retired old variables (A22, SEAICE_lhsublim, areaMax, areaMin, hiceMin) and
+     added some new ones (SEAICE_area_reg, SEAICE_hice_reg, SEAICE_area_floor)
+    - Differentiated "regularization variables" from "floor variables"
+     * areaMin became SEAICE_area_reg (old A22) and SEAICE_area_floor
+     * hiceMin became SEAICE_hice_reg (old hiceMin)
+       (with _reg meaning regularization variable)
+    - SEAICE_lhSublim becomes lhSublim, the sum of SEAICE_lhEvap and SEAICE_lhFusion
+     so as to ensure energy conservation when going between phases
+   - A22 was not used anywhere
+) Changed regularization procedure for heffActual and hsnowActual to ensure
+     well-boundedness and smooth adjoint in seaice_growth.F
+) Fixed a bug where seaice_solve4temp would not recognize ice-free grid cells
+     because the old regularization always set heffActual >= 0.05 cm
+) Changed the model so that the default behavior is to put a small (10^-5) "floor"
+     on AREA when HEFF > 0.
+   - went from requiring ALLOW_PRECLUDE_INFINITESIMAL_AREA to be defined to
+     requiring that DISABLE_AREA_FLOOR *not* be defined
+  Affected verifications:
+   - 1D_ocean_ice_column (output.txt output_adm.txt)
+   - global_ocean.cs32x15 (output.seaice.txt output_adm.seaice.txt)
+ o pkg/diagnostics:
+   - move MNC code from diagnostics_out.F into new diagnostics_mnc_out.F (2 S/R).
+   - rename S/R GETDIAG to DIAGNOSTICS_GET_DIAG and change type of 1rst argument
+     (was _RL, now integer) with option = 0 to retrieve all levels.
+   - add pieces of code to compute velocity potential at each level (new diagnostics
+     PhiVEL, works only when UVELMASS & VVELMASS are also turned on);
+     for now, using same params as CG2D (target-resisual, max Nb of iter ...).
+   - fix few issues with counter diagnostics in diagnostics_setdiag.F &
+     diagstats_setdiag.F (if diagnostic counter is itself a counter diag)
+     and in diagnostics_fract_fill.F (do not need a valid pointer for the
+     diagnostics counter-mate); check that definition of counter-diagnostic
+     includes a valid counter-mate (in diagnostics_set_levels.F).
+ o model/src (rStar):
+   - add rStar scaling factor in diags_phi_hyd.F (similar to calc_grad_phi_hyd.F);
+     affect solution only if z* with full pressure in EOS;
+     update output of test-exp global_ocean.90x40x15.
+ o pkg/seaice:
+   - introduce siEps=1e-5 parameter
+   - use areaMax in AREA update (part 4), consistent with ridging step (part 2.5).
+   - re-organize SEAICE_ADD_SUBLIMATION_TO_FWBUDGET code.
+   - introduce ALLOW_SITRACER and seaice_tracer_phys.F to handle generic seaice tracer.
+     For now it covers, and was tested for, ice salinity and age (attached to HEFF),
+     as well as ice cover age and ridging index (attached to AREA).
+     For now the run time parameters (in data.seaice/SEAICE_PARM03) are
+     SItrName (e.g. 'age') and SItrMate ('HEFF', which is the default, or 'AREA').
+     Up to SItrMaxNum=3 tracers can be used simultaneously.
+ o pkg/salt_plume:
+   -introduce SPsalFRAC run time parameter that sets the fraction of the
+    salt by-product of ice growth (SPsalFRAC*(1-SIsalFRAC)*salt typically)
+    that gets vertically redistributed (fluxed down) by pkg/salt_plume.
+ o model debug options:
+   - Switch reading of debugMode from S/R INI_PARMS (parameter file "data", stored
+     in PARAMS.h) to S/R EESET_PARMS (parameter file "eedata", stored in EEPARAMS.h).
+   - Refine debug-msg printing selection (3 new levels):
+     debugMode  : controls printing of debug messages (sequence of S/R calls).
+     debugLevel : controls printing of algorithm-relevant auxiliary/debug messages
+      debLevZero =  0 ; /* level of disabled aux. msg printing */
+      debLevA =  1 ; /* level of minimum  aux. msg printing */
+      debLevB =  2 ; /* level of low aux. print (report read-file opening)*/
+      debLevC =  3 ; /* level of moderate debug prt (most pkgs debug msg) */
+      debLevD =  4 ; /* level of enhanced debug prt (add DEBUG_STATS prt) */
+      debLevE =  5 ; /* level of extensive debug printing */
+     New debugLevel default: with default debugMode value (=F),
+       = 2 (debLevB) or = 1 (debLevA) in case ALLOW_AUTODIFF is defined.;
+       and if debugMode=T, default debugLevel = 4 (debLevD).
+     Relation with previous settings:
+      debLevB (=2) corresponds to former debLevA (=1)
+      debLevD (=4) corresponds to former debLevB (=2)
+     Note:
+      a) if debugLevel=0, skip WRITE_GRID call when nIter0 > 0 (same as before);
+      b) default debugLevel=1 is convenient in AD runs (avoid many file opening msgs);
+         to recover previous default, set debugLevel=2 (e.g. AD-test hs94.1x64x5)
+   - Add new parameter (printResidualFreq, read from PARM02 namelist) to print
+     detailed CG solvers convergence; off (=0) by default, except if debugLevel=5.
+ o pkg/obcs:
+   - change OBCSfixTopo default from True to False (should not change the results);
+     keep OBCSfixTopo=T in verification-exp. seaice_obcs.
+ o pkg/thsice:
+   - fix bug in thsice_calc_thickn.F (was introduced in version 1.18) in
+nd layer seaice sublimation (unlikely to happen)
+   - use Interior mask for OBCS in thsice_advection.F (similar to what is
+     done in gad_advection & seaice_advection).
+ o adjoint:
+   bug fix spotted by Gael Forget:
+   seaice_advection and thsice_advection still had
+   legacy CPP options to avoid CS corner updates for adjoint
+ o pkg/seaice:
+   => Change some of the defaults (2011/05/29):
+      - change SEAICEuseFluxForm default (from False to True)
+      - change DIFF1 default (from 0.004 m/s to 0. m/s)
+      And print warnings if DIFF1 is not set in data.seaice and centered
+       avection scheme is used without any diffusion.
+   also:
+   - fix seaice_diffusion calls in default AdvScheme part of seaice_advdiff.F;
+   - set SEAICEdiffKh[] default in the same way as SEAICEadvSch[]
+   - stop if DIFF1<>0 with SEAICEadvScheme <> 2, if DIFF1<>0 with any
+     other non-zero SEAICEdiffKh[] diffusivity, if SEAICEadvSalt=T with
+     #undef SEAICE_VARIABLE_SALINITY, if SEAICEadvAge=T with #undef SEAICE_AGE.
+   update results of test exp.:
+      lab_sea: output.fd (switch to AdvScheme=33 with diffKh=20)
+          output.hb87, output_adm.evp (SEAICEuseFluxForm=T and diffKh=200)
+          output_adm.noseaicedyn (SEAICEuseFluxForm=T)
+      offline_exf_seaice: output.seaicetd, output_adm (SEAICEuseFluxForm=T)
+      seaice_obcs: output (SEAICEuseFluxForm=T)
+   and prescribe old default for SEAICEuseFluxForm (=F) and DIFF1 (=0.004)
+       for standard fwd & AD lab_sea tests (to keep the same output).
+ o pkg/seaice/seaice_growth.F:
+   - use Ian Fenty's capping formulas for actual ice
+   thickness thoughout EVOLUTION branch.
+   - put treatment pathological case #2) in CPP brackets
+   (ALLOW_AVOID_INFINITESIMAL_AREA, undef by default).
+   - update global_ocean.cs32x15 and 1D_ocean_ice_colum results accordingly.
+ o pkg/seaice:
+   - seaice_diffusion.F : remove the min(DX,DY) factor permanently;
+   pass the Laplacian diffusivity (in m^2/s) diffKh as a parameter;
+   also pass fac as a param, which can be 1. (to update the tendency
+   field) or the time step (to update the field itself).
+   - seaice_advdiff.F: for multidim, call seaice_diffusion with
+   e.g. SEAICEdiffKhHeff and with fac=1; for single-dim, call
+   seaice_diffusion with e.g. SEAICEdiffKhHeff and with fac=time step.
+   - SEAICE_PARAMS.h, seaice_readparms.F, seaice_check.F :
+   hooks to handle SEAICEdiffKhHeff, SEAICEdiffKhArea, etc.
+ o pkg/seaice:
+   diffusion with centered advection scheme (diffus.F & advect.F):
+   - simplify S/R DIFFUS (put deltaT & DIFF1 factor outside, move EXCH outside)
+     to just compute the laplacian of input-field.
+   - unroll k loop (harmonic,biharmonic diff) in advect.F to save 1 exch call.
+   - fix flux-form version in diffus.F to conserve tracer.
+   update output of lab_sea.fd & lab_sea.hb87 (1rst set of modif affects
+    machine truncation) and lab_sea.salt_plume (conservative flux-form modif)
+ checkpoint62y (2011/05/26)
+ o pkg/seaice:
+  - seaice_growth.F : in EVOLUTION branch, always include
+    a_QSWbyATM_cover in qnet (as it should be).
+  - verification/global_ocean.cs32x15 : update results accordingly
+    (output.seaice.txt output_adm.seaice.txt).
+ o pkg/seaice + obcs:
+  - use maskInW & maskInS in multi-dim advection and biharmonic diffusion:
+    equivalent of assuming no tracer gradient outside the OB region.
+    update output of seaice_obcs (uses DIFF1 <>0 => biharmonic diffusion)
+  - remove calls to OBCS_COPY_TRACER after EXCH calls (no longer needed
+    after changes above);
+  - obcs+seaice cleaning: apply seaice-tracer OB values to tracer field
+    only at OB location (instead of over a band of OLx width).
+ o pkg/seaice:
+  - fix wrong indices in old (non Flux-Form) diffusion default S/R diffus.F
+    (dxG(I+1, ...) changed to dxG(I, ...), no impact on Lat-Lon grid)
+ o pkg/obcs:
+   - split header file "OBCS.h" into 4 separated files:
+     OBCS_PARAMS.h, OBCS_GRID.h, OBCS_FIELDS.h & OBCS_SEAICE.h
+    Note: OBCS_PARAMS.h & OBCS_GRID.h can be included without OBCS_OPTIONS.h
+      (contain no conditional statement which depends on OBCS options).
+   - move "useOBCSYearlyFields" from "data.obcs" (hold in OBCS_PARAMS.h)
+     to parameter file "data.exf", namelist EXF_NML_OBCS (in EXF_PARAM.h).
+ o ctrl, cost, grdchk & autodiff pkgs:
+   - make options file more standard (like other {PKG}_OPTIONS.h file but
+     with AD_CONFIG.h); clean-up some of the included header files.
+ o pkg/obcs:
+   - do not mask tracer when applying OB (tracer == 0 could generate problems)
+   - apply tracer OB values to tracer field only at OB location (instead of
+     over a band of OLx width)
+   - clean-up obcs_apply_w.F & obcs_apply_eta.F (since less calls to these S/R)
+   - remove OBCS_MULTIDIM_OLD_VERSION code in gad_advection.F and remove
+     obcs_apply_tloc.F & obcs_apply_sloc.F
+ o obcs in model/src:
+   - call OBCS_APPLY_W only if NonHydrostatic.
+   - call OBCS_APPLY_ETA only if NonLinFreeSurf.
+   - reset dEtaHdt and wVel to zero outside OB interior region ;
+   - leave tracer unchanged outside OB interior region: This has no effect
+     on the solution but just to prevent unrealistic tracer value outside OB.
+   - zero out velocity outside OB interior region: This has no effect on
+     the solution but just to prevent unrealistic velocity outside OB.
+ o obcs and non-lin free-surf:
+    move call to OBCS_APPLY_R_STAR from update_r_star.F to calc_r_star.F
+    and call to OBCS_APPLY_SURF_DR from update_surf_dr.F to calc_surf_dr.F
+    + add argument "etaFld" to OBCS_APPLY_R_STAR & OBCS_APPLY_SURF_DR:
+    this fixes missing EXCH + get consistent eta OB value (+ fix restart).
+    update results of test-exp. exp4(nlfs).
+ o exp4 (nlfs) test-exp:
+    use OBC for Eta at Western & Eastern OB (to test prescribing Eta
+    with NonLin-FreeSurf); update output.nlfs.txt
+ o obcs and 2d/3d solver norm:
+    use interior masks (maskInC) to cancel out cg2d & cg3d matrix coeff at OB
+    and outside OB interior region (will allow to place OB further inside the
+    domain). Depending on the domain, can affects cg2d-Norm (previous
+    cancellation outside OB was only partial), e.g. in exp4 & obcs_ctrl,
+    and cg3d-Norm (previous Norm was computed before canceling OB terms),
+    e.g. in tutorial_plume_on_slope.
+   - update output of exp.: exp4 (x2), obcs_ctrl and tutorial_plume_on_slope.
+ o pkg rbcs:
+   - split RBCS.h into 3 files: RBCS_SIZE.h, RBCS_PARAMS.h & RBCS_FIELDS.h
+   - add capability to apply relaxation to horizontal velocity uVel & vVel.
+ o pkg/grdchk: add gradient check for control variable xx_shifwflx
+ o pkg/shelfice/shelfice_init_fixed.F
+   fix CPP-flag combinations
+ o pkg/seaice: Merge iceage code of Pierre Rampal
+   * update/change/correct ice age calculations
+   * add age updates for pathological cases
+   Probably needs more testing...
+ checkpoint62x (2011/05/13)
+ o pkg/mom_vecinv:
+    high-order vorticity scheme: use interior masks (maskInW & S)
+    to zero-out (outside OB) gradient of vorticity.
+ o verification exp.:
+    turn on "useEnergyConservingCoriolis" (better discretisation) in exp.
+    hs94.128x64x5 and seaice_obcs ; update results.
+ o pkg/obcs:
+   fix bug in OBeta for YZ sections in obcs_exf_load.F
+ o pkg/ctrl, pkg/shelfice, and optim:
+   - add new control variable xx_shifwflx (fresh water flux underneath ice
+     shelves). This is almost as tedious as obcs-ctrl, because the
+     variables needs its own mask.
+   - add a cost function term that penalizes the deviation of xx_shifwflx
+     from the first guess (zero) in analogy to other control variables
+ o pkg/shelfice:
+   - start basic adjoint
+ o pkg/ctrl:
+   - remove extra 2D field "for good measure" when initializing in
+     ctrl_set_globfld_[xy/xz/yz].F
+   - replace hard coded precision 32 (a bug) in ctrl_map_ini_gen by ctrlprec
+   - improve error messages in ctrl_set_unpack_*
+ o OBC implementation in momentum:
+    use interior masks (maskInC,W & S) in momentum S/R:
+    - multiply divergence, tension and some del^i.u or del^j.v by maskInC
+    - multiply del2u,del2v by maskInW/S (biharmonic viscosity)
+    - multiply horiz. grad of vorticity by maskInW/S (in Leith scheme)
+    - multiply gradient of wVel by maskInW/S in del2w calculation (NonHyd)
+    Motivation: fix/clean implementation of OBC with biharmonic-viscosity
+     (and also with Leith/Smagorinsky harmonic-viscosity).
+    Update output of experiment dome and exp4 (+nlfs).
+ o exp4 test-exp:
+   - turn on: nonHydrostatic, exactConserv, viscA4 (with momDissip_In_AB=F)
+     and prescribe time-varying OB (without pkg/exf) for zonal-velocity
+     at Western & Eastern Boundaries (+/- 1 per-cent); Also prescribe
+     time-varying OB at Western-side for wVel (NonHyd); update output.
+   - add secondary set-up (.nlfs) using NonLin FreeSurf (z*) + mom_vecinv
+     and biharmonic-viscosity ; also use prescribed time varying OB.
+ o pkg/obcs:
+   fix bug in OBWeta,OBWeta indices in obcs_apply_r_star.F
+ o model/src:
+   - fix startTime setting when baseTime<>0 & nIter0=0 are specified ;
+   - initialise startTime & nIter0 with unlikely values: allows to set one
+     from the other without ambiguity.
+ o seaice_obcs test-exp.:
+   add small diffK4T,S to test biharmonic diffusivity with OBCS ; update output.
+ o pkg/obcs:
+   - remove calls to OBCS_COPY_TRACER after EXCH for T,S & pTracer:
+     no longer needed with maskInC,W,S in pkg/generic_advdiff.
+ o pkg/seaice:
+   - retired SEAICE_SALINITY and SEAICE_salinity in favor of
+     SEAICE_VARIABLE_SALINITY and SIsalFRAC, respectively.
+   - fixed bug in the initialization of sea ice salinity variable HSALT
+     in seaice_init_varia.F  (removed dependence on ICE2WATR)
+ o fizhi-cs test exp.:
+    switch reference output convention for these 2 non-standard test-exp,
+     from: pgi  6.1-5 on faulks (FC.6, -of linux_ia32_pgf77+authors_fc5)
+       to: ifort 11.1 on baudelaire (FC.13, -of linux_amd64_ifort11)
+    reason: faulks might get retired soon and pkg/fizhi has still Pb with gfortran
+ o model/inc:
+   - change type of PmEpR array (from _RS to _RL) to fix restart (with "-use_r4")
+     of exp. global_ocean.90x40x15 (Suncronous time-stepping + Real-FW + NonLin-FS)
+ o pkg/seaice:
+   - fix calculation of saltFlux and saltPlumeFlux when using SEAICE_SALINITY
+ o verification/lab_sea, 1D_ocean_ice_column, seaice_obcs, global_ocean.cs32x15
+   - updated output*.txt files due to bug fixes in salt, saltPlumeFlux,
+     and initial HSALT
+ checkpoint62w (2011/04/26)
+ o pkg/mom_fluxform:
+   - fix calculation of del2u & del2v (no-slip BC) when using Non-Lin Free-Surf.
+   - use parameter "sideDragFactor" in no-slip BC side-drag part.
+   - update output of exp. global_ocean.90x40x15
+ o pkg/mom_vecinv:
+   mask del2u & del2v (no effect on results, but cleaner & closer to mom_fluxform)
+ o update seaice exp.:
+   use more consistent parameter values (remove "backward compatability only":
+    ICE2WATR, SEAICE_lhSublim, SEAICE_cpAir, SEAICE_rhoAir + set rhoConstFresh)
+   related to thermodynamics seaice. Update output (fwd+AD) of exp.:
+D_ocean_ice_column (x2), lab_sea (x8), ioffline_exf_seaice (x2) & seaice_obcs
+ o update test-exp global_ocean.90x40x15:
+   o use default CD_CODE_OPTIONS file (Adams-Bashforth on CD Mom & Coriolis).
+   o increase Overlap size from 2 to 3 (to allow to test bi-harmonic Visc.)
+   o new pickup-files from a 100.yr run with pkg/down_slope (input.dwnslp params)
+   o turn on zStar & viscA4 in standard set-up (dir input/)
+     and update output files: output.txt & output.dwnslp.txt
+ o new AD-test experiment: obcs_ctrl
+   (From Matt MITgcm_Contrib/SOSE/BoxAdj) to test OBCS as control vector.
+ o pkg/dic:
+   fix two bugs in handling water vapour pressure in carbonate chemistry
+   and air-sea fluxes. Found by Val Bennington and Galen McKinley
+   (add DIC Option = WATERVAP_BUG to recover old results)
+   update output of tutorial_global_oce_biogeo (fwd+AD) & tutorial_dic_adjoffline
+ o adding allowInteriorFreezing option to check for water below freezing point
+   at depth and bring the negative heat anomaly to the surface level
+ o pkgs _fields_load:
+   - extend GET_PERIODIC_INTERVAL to deal with non-periodic case (from pkg/rbcs)
+   - use new S/R GET_PERIODIC_INTERVAL in pkgs:
+     bulk_force, cheapaml, cfc, dic, obcs (+ ctrl/ctrl_get_gen_rec), offline and
+     rbcs to get interpolation weights and time reccord number.
+   - fix multi-threading in aim_fields_load.F
+   - apply EXCH to temp arrays [0,1] after reading in dic_fields_load.F
+ o external_fields_load:
+   new S/R GET_PERIODIC_INTERVAL to calculate which time-record (and linear
+    interpolation weights) to use in a periodic time-series ; do not divide by
+    time-step to convert to integer:
+    - this fixes case where externForcingPeriod is not multiple of time-step
+       (Thanks to Christopher L. Wolfe)
+    - this fixes case where externForcingPeriod is an odd multiple of time-step
+      (was wrong by half of time-step); update results of tutorial_global_oce_in_p.
+   store index of time-record which is currently loaded:
+    - works without any assumption on sequence of calls to EXTERNAL_FIELDS_LOAD ;
+    - needed for the adjoint but not yet used because of extensive recomputations;
+      (to be fixed soon)
+ checkpoint62v (2011/04/02)
+ o verification/1D_ocean_ice_column added to test Ian Fenty's
+   pkg/seaice_growth.F modifications for improving sea ice code differentiability
+ o update output of exp4, internal_wave, seaice_obcs, tutorial_plume_on_slope
+   (new velocity statistics after changing maskInW & maskInS definition)
+ o pkg/generic_advdiff with OBCS:
+   use maksInW & maskInS in advective flux and in biharmonic diffusion calculation:
+   equivalent to assumption of no tracer gradient outside the OB region.
+   This will affect the results if using obcs+biharmonic diffusion.
+   update output_adm.txt of experiment bottom_ctrl_5x5 (not expected since no obc)
+ o pkg/obcs:
+   change definition of maskInW & maskInS: leave OB edges inside (maskIn=1)
+   (e.g., maskInW(OB_Ie)=1 ) so that velocity normal-component at OB is still
+   in Interior region. No impact on solution but affects Velocity monitor stats.
+ o pkg/ptracers (adjoint)
+   New option AUTODIFF_PTRACERS_SPLIT_FILES for writing separate
+   tape file for each tracer
+ o model/inc/src and pkg/autodiff: add parameters that allow to turn
+   of parts of the adjoint code at run time. For now, there are only
+   useKPPinAdMode, useGMrediInAdMode, and useSEAICEinAdMode. These
+   parameters are set in data.pkg.
+   This is the lazy coward's version of doing this, but still useful for
+   debugging. In order to do it right, everything needs to be moved to
+   pkg/autodiff.
+ o pkg/autodiff: fix global_sum_tile_ad.F by resetting adsumPhi at
+   the end; this fixes the adjoint balancing code for open boundaries.
+ o pkg/ctrl:
+   - change behavior of xx_${varname}period to be analogous to exf-conventions:
+     xx_${varname}period =   0.,  means time-independent control part
+     xx_${varname}period = -12., means one-year-periodic monthly control part
+   - introduce helper routine ctrl_init_rec (part of ctrl_init.F) to
+     clean up ctrl_init a little, remove unused variables
+   - ctrl_init: fixed the handling of the start/endrec for obcs-variables
+   - move "call cal_GetMonthsRec" from s/r ctrl_get_gen to s/r ctrl_get_gen_rec
+ checkpoint62u (2011/03/15)
+ o model/src:
+   - for the adjoint, change NonLin-FreeSurf initialisation sequence: fill-in
+     h0Fac from INITIALISE_FIXED and reset hFac to h0Fac in INITIALISE_VARIA ;
+   - in initialise_varia.F (except for ALLOW_DEPTH_CONTROL) remove 2nd call to
+     INI_DEPTHS, INI_MASKS_ETC & INI_LINEAR_PHISURF.
+ o pkg/ctrl/obcs/ecco:
+   - remove obsolete, unused, and partially broken code:
+     ctrl_obcsvol/ctrl_obcsbal/ctrl_volflux and code within
+     ALLOW_CTRL_OBCS_BALANCE
+   - put a stop statement into ecco/cost_obcsvol.F, but also add
+     cost_obcsvol to ecco_ad_diff.list
+ o pkg/ecco: fix counting cost function contributions for obcs (code
+   by Matt M.) and diffkr for diagnostics
+ o pkg/ecco, pkg/ctrl, pkg/grdchk:
+   add cost penalty terms for initial uvel, vvel, eta controls
+   and I/O for prior error files
+ o pkg/mdsio:
+    move mds_check4file.F from eesupp/src to mdsio_check4file.F ; add option
+    (new argument) to check for tiled file in mdsioLocalDir : this fix the
+    restart from pickup_som , pickup_dic (& dic_co2atm) with mdsioLocalDir.
+ o pkg/ctrl:
+  - ctrl_obcsbal.F, ctrl_obcsvol.F: replace last calls of ctrl_getrec by
+    ctrl_get_gen_rec, put a stop statement into ctrl_getrec. Remove
+    unused and superfluous variables
+  - ctrl_get_gen_rec.F: catch the case of xx_genperiod=0.
+ o pkg/ecco
+  - enable adjoint of Stevens OB
+ o pkg/ctrl/ecco/grdchk:
+   - remove global declaration of tmpfldx/yz and tmpfldx/yz2.
+     Fortunately, we do not have any tests for the numerous cpp-flagged
+     option of "obcs as control parameters" so we will never know
+     if this is an improvement (but at least now things compile).
+   - remove an obsolete initialization from ecco_cost_init_barfiles.F
+   - fix some problems within never used ifdefs to make the code compile
+ o pkg/obcs:
+  - Refine Interior mask definition to work with more complex OB (e.g.
+    if OB_Ie < OB_Iw); In case default setting is not sufficient, allows to
+    read in Interior mask from file. Check if Interior mask is consistent
+    with OB list of indices.
+ o pkg/seaice
+  - beginning code for a seaice tracer package,
+    but currently only used for seaice age: SEAICE_AGE
+    SEAICE_num = 4
+    iTracer = 1: area-weighted ice age
+            = 2: volume-weighted ice age
+            = 3, 4: template for one-year vs. multi-year ice
+    data.seaice has new namelist SEAICE_PARM03 for arrays related to
+    SEAICE_num
+ checkpoint62t (2011/03/05)
+ o pkg/obcs:
+  - obcs_apply_uv.F: change to a 2 steps method, first tangential component;
+    then normal component. This ensures that the normal component is set
+    correctly even when it conficts with tangential setting from an other OB.
+    Affects results of test-experiment seaice_obcs: update the output.txt
+ o pkg/obcs:
+  - add code to monitor statistics of dynamical fields at OB.
+  - take OBCS_BALANCE code out of obcs_calc.F into new S/R OBCS_BALANCE_FLOW :
+    - fix to OBCS_BALANCE code (right hFac ; deal with simple OB intersection).
+    - change default: balance the Net inflow through all OB (instead of balancing
+      each OB separately); keep the old method if setting OBC_balanceFacX < 0.
+  - switch on useOBCSbalance in dome experiment: only correct Western OB outflow
+    to match Nortern OB inflow (OBCS_balanceFacN=0).
+ o pkg/seaice:
+  - redefined actual sea ice age to be ICEAGE/HEFF ifdef SEAICE_AGE_VOL
+ o pkg/seaice (seaice_growth v 1.113):
+  - reverting seaice_growth to v 1.111 in order to have code with exact bit
+    compatibility with MITgcm_contrib/ifenty/Fenty_seaice_thermo_code_merge
+    CPP option SEAICE_OCN_MELT_ACT_ON_AREA removed in v 1.112 is reintroduced
+    runtime flag SEAICEareaFormula is kept but is inactive
+ o model/src:
+  - add new param to scale curvilinear grid distance and area when using
+    a different sphere radius from the grid-files.
+  - test/check multi-threads EXCH applied to local variable (cg2d_x)
+ o adjoint:
+  - enable adjoint of Stevens OB
+  - add dummy_in_dynamics to enable extraction of ADJrhoinsitu
+    (a bit delicate because of potentially modified adj. common block structure;
+    current switch is ALLOW_AUTODIFF_MONITOR_DIAG, could be changed later)
+ checkpoint62s (2011/02/15)
+ o pkg/seaice (seaice_growth v 1.112):
+  - introduce SEAICEareaFormula run time parameter, which selects the recipe for
+    computing the ice cover tendency from effective thickness tendencies. Include
+    Ian Fenty's formula.
+  - remove 'undef SEAICE_OCN_MELT_ACT_ON_AREA' which may now be achieved using
+    SEAICEareaFormula.
+  - simplify notations for the various d_HEFF/d_AREA terms.
+ o pkg/gmredi:
+  - add Boundary-Value-Problem bolus transport (Ferrari etal, OM 2010) code
+    from Christopher Wolfe (UCSD); add partial cell factor in vertical derivative;
+    add a verification test-run (front_relax.bvp) to test GM_useBVP.
+ o pkg/seaice (seaice_growth v 1.111):
+  - for SEAICE_DO_OPEN_WATER_GROWTH, replace Gael's implementation with Ian's.
+  - the new SEAICE_DO_OPEN_WATER_MELT allows open-water air-sea heat fluxes to
+    also melt ice.
+ o pkg/seaice:
+  - McPhee formula for Ice-Ocean fluxes (provided by Ian Fenty).
+  - can be used by #define MCPHEE_OCEAN_ICE_HEAT_FLUX in SEAICE_OPTIONS.h
+ o pkg/cheapaml:
+  - from Nico Wienders: New version of this package.
+ o pkg/flt:
+  - add CPP options to prevent floats to re-enter the opposite side of
+    a periodic domain (default: keep periodicity)
+ o pkg/gmredi:
+  - apply exchange to GM_PsiX,GM_PsiY to get valid values near CS-corners
+    (needed for multi-dim advection).
+  - switch on GM Advective form in global_ocean.cs32x15 and update output.txt
+ o model/src:
+  - fix wrong re-setting of addMass array (ALLOW_ADDFLUID) for atmospheric run.
+ o tutorial_tracer_adjsens
+  - extend to NLFS and replace maskC by hFacC
+    (change reference output accordingly)
+ checkpoint62r (2011/01/24)
+ o testreport:
+  - add option -deloutp (-do) to remove output file after successful run
+  - add option -mfile (-mf) for MPI machile-file and for each test-exp,
+    extract exact list of procs from this file ; adjust COMMAND by
+    replacing TR_MFILE & TR_NPROC with local machile-file & Nb of MPI procs.
+ o pkg/ecco: replace old ineffective way of penalizing deviations from
+   first guess (of obcs) with code by Matt Mazloff
+ o pkg/ctrl: add code that allows the use of ALLOW_OBCS?_CONTROL without
+   exf/cal
+   - ctrl_init: fix initialisation (computation of diffrec) for obcs-ctrl
+     and handle case of obcs?period == 0
+     Not affected by these changes: There is still an inconsistency in
+     the computation of start/endrec for the obcs variables for ALLOW_CAL
+     defined (see comment by Menemenlis, 7-Mar-2003)
+   - make S/R ctrl_get_gen_rec return something meaningful even if
+     ALLOW_CAL is not defined
+   - ctrl_getobcs?: simplify code so that it does not need to use
+                    S/R exf_swapfields
+ o testreport:
+    allow to test MPI with different number of processors for each experiment:
+    create file "SIZE.h.mpi" in each build dir.
+    Note: update of "-command" argument not yet implemented.
+ o model/src, pkg/autodiff, pkg/ecco, pkg/seaice:
+   alleviate the need for additional 3D tapes when using
+   the non-inear free surface in the adjoint. This is done
+   by adding an 'update' of hfacc etc. to their current
+   value at the beginning of forward_step.F.
+ o pkg/seaice
+   seaice_lsr: move stress-divergence computations out of outer pseudo-
+   timestepping loop
+ o pkg/obcs/obcs_prescribe_read.F: move 'CALL OBCS_EXTERNAL_FIELDS_LOAD'
+   up, so that the calls of the ctrl_* subroutines are really at the end
+   of the routine.
+ o pkg/gmredi:
+   allow to specify a 2-D horizontal map and a 1-D vertical profil
+   as scaling factor for Isopycnal diffusivity (Redi) and GM diffusivity.
+ o pkg/seaice:
+   move lsr iterations from seaice_dynsolver to seaice_lsr.
+ o pkg/seaice:
+   reduce memory footprint of seaice mutldim advection tapes,
+   by using a 2D tape independent of the generic_advdiff ones,
+   and setting GAD_AREA=1 etc. rather than GAD_AREA=101 etc.
+ checkpoint62q (2010/12/29)
+ o model/src:
+   - check horizontal grid-spacing for unset or zero/negative values.
+   - change AD test hs94.1x64x5 to be truly a 2-D set-up.
+ o pkg/flt:
+   - use (recent) mdsio S/R MDS_READVEC_LOC instead of local FLT_MDSREADVECTOR
+   - precision of input and output files set according to readBinaryPrec
+     and writeBinaryPrec (previously always 64.b), pickup remains at 64 bits.
+   - initial float position from tiled file was not converted to index space
+     (looks like a bug): fixed to make it similar to initial pos. global file.
+ o global_ocean.cs32x15:
+    change SIZE.h of AD set-up to get same tiling as with MPI.
+    Update output_adm, output_adm.thsice (pass@14) & output_adm.seaice (fail@11)
+ o model/src:
+    add flag to control printing of domain fields (bathymetry, hFac ...) in
+    ini_mask_etc (call to plot_fieds_xy*).
+ o pkg/thsice:
+    if useEXF, some forcing fields are not valid in overlap: fixed by computing
+    over the interior only + apply EXCH at the end (like with SEAICE advection).
+ o pkg/mdsio:
+   - add 2 arguments to S/R MDS_PASS_R4/8toRL/S for overlap size of buffer
+     to copy to/from, so that it can be used to replace MDS_PASS_WH_R8toRL/RS.
+   - change barrier call for safe multi-threads access to 3-D shared buffer.
+   - MDS_READ/WRITEVEC_LOC use buffers from MDSIO_BUFF_3D.h (instead of local ones)
+   - replace call to MDS_PASS_WH_R4/8toRL with call to MDS_PASS_R4/8toRL and
+     remove the 4 S/R MDS_PASS_WH_R4/8toRL/S.
+ o pkg/flt:
+   - add fourth-order Runge-Kutta integration
+   - add basic exch2 support (only 1 facet supported so far!)
+ o pkg/mdsio+rw:
+   new S/R to read local (or tile independent) vector (read counterpart of
+    mds_writevec_loc, and front-end write_glvec_rl/rs).
+ o global_ocean.cs32x15: additional input_ad.seaice experiment
+     that uses pkg/seaice rather than pkg/thsice.
+     (using multidim advection for seaice)
+ o towards more F95 syntax for array specification in namelist:
+   - change "data.diagnostics" (data.ptracers was changed before checkpoint62p)
+     of all verification experiments.
+        e.g.:    line: fields(1,3)='ETAN    ','ETANSQ  ',
+       was changed to: fields(1:2,3)='ETAN    ','ETANSQ  ',
+   - finish adding "-DNML_EXTENDED_F77" to DEFINES list in pgf77 and g77 optfiles
+ o global_ocean.cs32x15: additional input.seaice experiment
+     that uses pkg/seaice rather than pkg/thsice.
+ checkpoint62p (2010/12/17)
+ o pkg/thsice: rename (ad tape index) iicekey as ticekey, and move it
+     to THSICE_SIZE.h to avoid conflict with pkg/seaice.
+ o pkg/seaice: add seaice_diffusion.f seaice_map_thsice.f to adjoint.
+     allow for use of multim. advection in seaice adjoint.
+ o pkg/seaice: add diagnostics for snow precipitation and sublimation flux
+   - first attempt to close budgets by taking into account the freshwater
+     flux implied by the sublimation of snow and ice. So far only the
+     volume budget is closed, turn on with soon-to-be-retired-again CPP-Flag
+     SEAICE_ADD_SUBLIMATION_TO_FWBUDGET
+ o eesupp/src:
+   new S/R with new option (NML_EXTENDED_F77) to change array specification
+   from F95 standard to commonly accepted extended F77 form.
+   This would allow to use F95 syntax in namelist (needed with gfortran 4.4.5)
+   and to revert back to the original syntax (with -DNML_EXTENDED_F77)
+   for less tolerant f77 compiler (e.g., pgf77, g77).
+ o globalFiles:
+   commented out in parameter file "data" since it's not safe with MPI
+   (e.g., wrong on aces); keep it if useSingleCpuIO=T (but not doing much
+   in this case); no longer commented out in restart test (tst_2+2).
+ o add adTapeDir to specify a special directory where adjoint tapes are
+   written/read (adread_adwrite.F). adTapeDir is specified in data/PARM05
+   and cannot be used together with mdsioLocalDir.
+ o nesting pkgs:
+   - packages_init_variables : put call to OBCS_INIT_VARIABLES in last position
+   - update Gianmaria's Nesting pkgs (from Contrib/nesting_sannino)
+   - add parameter files + utils dir + output from short run on beagle.
+ o pkg/seaice:
+     fix seaice_growth.F store directives; update results of exp. lab_sea.ad
+ o pkg/seaice: explicitly store tsurfloc in seaice_solve4temp.F to avoid
+   unnecessary copying in adjoint code, requires new parameter NMAX_ITER
+ checkpoint62o (2010/11/25)
+ o pkg/exf:
+   - change CPP option EXF_VERBOSE to run-time logical param exf_verbose.
+ o pkg/seaice:
+   - seaice_ocean_stress: split a loop for better vectorization of the
+     adjoint code
+   - seaice_growth.F: fix bug in conservation of freshwater connected to
+     capping of heff, put contribution into d_HEFFbyNEG
+   - replace irritating parameters SEAICE_latentWater/Ice and SEAICE_sensHeat
+     by something more sensible (parameters that are what their name implies)
+   - change some defaults, so that by default exf-parameters are used for
+     things like rhoAir, cpAir,latent/sensible heat parameters, in order
+     to reproduce the old results, many data.seaice now contain funny values
+     for cpAir and latent heat of sublimation
+ o packages_readparms.F: move exf_readparms up in line so that
+     exf-parameters are visible for other packages (e.g. seaice)
+ o debugMode & debugLevel=2:
+   - differentiate between debugMode & debugLevel=2:
+     debugMode: controls printing of debug messages (sequence of S/R calls).
+     debugLevel: controls printing of algorithm intermediate results and stats.
+   - remove "if debugLevel=2 => debugMode" but keep "debugMode =>  debugLevel=2";
+     => allows to print debug-stats without all sequence of call messages.
+   - switch control of debug print from debugLevel to debugMode in many S/R.
+ o pkg/obcs (obcs-sponge):
+     fix bug that was introduced on Oct 25 (in dynamics.F v1.151): put back the
+     call to OBCS_PRESCRIBE_EXCHANGES (need to exch gU,gV when using obcs-sponge)
+ o pkg/generic_advdiff:
+   - record overlap minimum size for each advection scheme;
+   - refine criteria on overlap minimum size;
+   - check and stop (in gad_check) if overlap size is too small.
+ o pkg/obcs:
+   - with ptracers: remove multiple calls to obcs_apply_ptracer (only done
+     once, in ptracers_implicit.F)
+   - with seaice: remove test on empty file name in obcs_apply_seaice (always
+     apply OB values when tile has OB)
+ o model/src, coriolis setting:
+   - integer parameter "selectCoriMap" (=0,1,2) replaces 3 logical
+     useConstantF, useBetaPlaneF, useSphereF ; can now read coriolis from
+     files (selectCoriMap=3) with any grid.
+   - add parameter "fPrime" for constant second Coriolis coeff (default=0).
+ o pkg/seaice/seaice_growth.F:
+     a few cosmetic changes that reduce the number of lines of code
+ o pkg/obcs: add boundary conditions following Stevens (1990)
+   - the code follows old MOM/NAOSIM code
+   - so far it is only implemented for the eastern and western boundaries
+     and NOT for pTracers
+ o pkg/rbcs:
+   - replace rbcsInIter by rbcsForcingOffset, the time in seconds at the
+     beginning of the first rbcs forcing period.
+   - add option rbcsSingleTimeFiles that makes rbcs read forcing data like the
+     offline package, i.e., one file per time, labeled by iteration number;
+     deltaTrbcs sets the timestep with which the data was generated;
+     rbcsIter0 is the forcing iteration corresponding to rbcsForcingOffset.
+   - rbcsForcingCycle=0 makes forcing non-cyclic.
+   - make arithmetic safe for negative times and odd forcing periods.
+ checkpoint62n (2010/11/09)
+ o pkg/seaice:
+     fix masking in free-drift S/R ; update results of exp. lab_sea.fd
+ o pkg/obcs:
+    New S/R to copy tracer value from the OB location to narrow band region
+     (width = same as overlap) beyond the OB: preserve OB value (needed for
+     high-order scheme) which were overwritten by EXCH call if in overlap
+     region. Applied to theta, salt, ptracer and advected seaice variables.
+    With seaice: use maskInC in similar way as in gad_advection.F,
+     in seaice_advection.F and advect.F.
+    Update output of experiment seaice_obcs and change exp4 to test OBCS with
+th order Adv.Scheme. for pasive salt and ptracer.
+ o tools/genmake2:
+   - when looking for an optfile (not specified), only search for Fortran compiler
+     (remove sym-link test + setting of CPP + makedepend check + C-compiler check)
+   - in get_fortran_c_namemangling: use "$CC $CFLAG" to compile C test programm
+     (instead of "$MAKE genmake_test.o" since an existing Makefile can be wrong)
+   - set default for CPP to "cpp -traditional -P" (was the case without specifying
+     an optfile, but otherwise default was just "cpp".
+   - comment out PLATFORM=$p_PLATFORM (no idea where p_PLATFORM comes from)
+   - when "CC" is not set in the optfile, look for possible C compiler
+     (instead of just setting CC=cc)
+   - put back version v.169 modif (from 2008/02/15), was dropped in v.173 changes:
+     => add a ".F" to ".o" rule for source files with no "#include" (such as
+        port_rand.F); otherwise, default ignores FOPTIM and just uses FFLAGS.
+   - move gfortran before g77 in list of possible Fortran compiler (consistent
+     with reference compiler switch from g77 to gfortran)
+ o pkg/seaice:
+   o remove SEAICE_OLD_AND_BAD_DISCRETIZATION-code, add a test to
+     seaice_check that stops the model, when the CPP flag is used.
+   o seaice_growth.F: make capping of ice volume conserving by returning the
+     capped ice as freshwater to EmPmR. This does not change the verification
+     experiments but will change runs where the capping is acutally active
+ o change reference platform+compiler from faulks+g77 to baudelaire+gfortran
+   (except the 2 fizhi test exp.); update output of exp.: bottom_ctrl_5x5,
+      global_ocean.cs32x15 (icedyn, thsice, AD thsice), global_ocean_ebm (AD),
+      lab_sea (fd, hb87, salt_plume), MLAdjust (3/5) and vermix (dd)
+ o tools/genmake2:
+   - merge genmake_warnings & genmake_errors into 1 log file: "genmake.log")
+   - change DUMPSTATE default to false (can use "-ds" option to switch it to T)
+   - clean previous genmake log files before anything else.
+   - change Makefile to remove testreport log files (*.tr_log) and genmake log
+     files only with "CLEAN" target (instead of "Clean");
+ o pkg/generic_advdiff:
+   Change OBCS in multiDim advection (gad_advection.F):
+    Use maskInC to prevent intermediate update of tracer-field in OB regions,
+    thus keeping current-time-step OB values; and remove the call to OBCS_APPLY
+    which were applying future time-step OB values.
+   This way, all explicit calculations use current-time-step OB values
+    (simpler and more consistent).
+   Affects results when set-up uses time-varying OBC and multi-dim advection;
+    update output of experiment seaice_obcs.
+ o pkg/seaice:
+   move OPTIONS (formerly locally defined) to SEAICE_OPTIONS.h:
+    this includes SEAICE_GROWTH_LEGACY (+ SEAICE_DO_OPEN_WATER_GROWTH &
+      SEAICE_OCN_MELT_ACT_ON_AREA ) and SEAICE_SOLVE4TEMP_LEGACY.
+   Default (pkg/seaice/SEAICE_OPTIONS.h) is to define SEAICE_SOLVE4TEMP_LEGACY
+    but leave SEAICE_GROWTH_LEGACY undef ; For now, keep verification exp
+    unchanged (SEAICE_GROWTH_LEGACY defined in */code*/SEAICE_OPTIONS.h)
+ o pkg aim (2010/10/26):
+   - Introduce ALLOW_INSOLATION, moving toward a more general incoming solar radiation
+     formulation with obliquity, eccentricity, ... as run-time parameters,
+   - Introduce diagnostics for top-of-the-atmaophere incoming solar radiation and
+     upward shortwave radition at the surface (all-sky and clear-sky).
  o pkg/obcs:
    - writing sections with globalFiles=T does not work: switch to tiled-files
      when writing sections for OBCS (change pkg/rw/write_rec.F accordingly).
-Line 420 
 o tools/build_options:
+Line 3560 
 o tools/build_options:
      but keep the former optfile for few weeks for smooth transition
  o pkg/ecco
    - allow user defined cost function contributions
-         CPP: ALLOW_USERCOST_CONTRIBUTION
+      CPP: ALLOW_USERCOST_CONTRIBUTION
-         USAGE: compute contributions in cost_usercost_all.F
+      USAGE: compute contributions in cost_usercost_all.F
    - note: this is identical to what ALLOW_GENCOST_CONTRIBUTION once was.
        the two options are complementary.
  o pkg/smooth

 Legend:



Removed from v.1.1321
 


changed lines


 
Added in v.1.1918
 Legend:



Removed from v.1.1321
 


changed lines


 
Added in v.1.1918
-Removed from v.1.1321
+Added in v.1.1918

	ViewVC Help
Powered by ViewVC 1.1.22