/[MITgcm]/MITgcm/doc/tag-index
ViewVC logotype

Diff of /MITgcm/doc/tag-index

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph | View Patch Patch

revision 1.1436 by jmc, Thu May 19 00:28:20 2011 UTC revision 1.1542 by jmc, Tue Dec 6 00:42:26 2011 UTC
# Line 4  $Name$ Line 4  $Name$
4      Notes on tags used in MITgcmUV      Notes on tags used in MITgcmUV
5      ==============================      ==============================
6    
7    o verification/advect_xz
8      - scale down the depth by 1/100 (from 200 km to just 2.km)
9      - add secondary test using divergent flow, r-star and implicit vertical advection.
10    o pkg/rbcs:
11      - add missing relaxUFile & relaxVFile in namelist (in rbcs_readparms.F).
12    o pkg/obcs (Stevens BCs):
13      - fix various problems in the phase speed computations of the Stevens
14        boundary conditions:
15        - sign error for western and southern boundaries,
16        - time tendencies were underestimated by factor of dTracerLev and some just
17          zero (for multidim advection schemes) -> now estimate time tendencies
18          from difference between previous (n) time level and the one before (n-1);
19          this requires storing a field per tracer per boundary, also in the pickup
20          files.
21        - replace deltaTmom in cflMer/Zon computation with dTracerLev
22        - set default phase velocity to cflMer/Zon
23      - update verification experiment exp4.stevens
24    o pkg/generic_advdiff (implicit_r):
25      - fix implicit vertical advection conservation with AB and/or NonLin-FreeSurf
26        (remove Tr*d/dz(w) in gad_implicit_r.F and add it in gad_calc_rhs.F);
27      - fix implicit vertical diffusion or advection with NonLin FreeSurf
28        (was using current recip_hFacC instead of future recip_hFacC): set future
29        recip_hFac in thermodynamics.F and pass & use it in all vertical implicit
30        solver S/R ;
31      - fill diagnostics of vertical advective fluxes (computed from tendency)
32        when using implicit vert. advection;
33      - update output of exp that uses NonLin-FreeSurf & implicit vertical diffusion:
34         global_ocean.90x40x15 (fwd+AD), global_ocean.cs32x15 (4 fwd +4 AD),
35         tutorial_global_oce_in_p (fwd), tutorial_tracer_adjsens (AD)
36         and cpl_aim+ocn (used in ocean); to be fixed: bottom_ctrl_5x5.
37    o pkg/diagnostics:
38      - add diags for T & S tendency which goes through Adams-Bashforth.
39    
40    checkpoint63f (2011/11/30)
41    o pkg/obcs/obcs_calc_stevens.F:
42      - join some loops to reduce number of if-statements
43      - fix a bug in code for northern and southern boundaries.
44    o pkg/seaice/seaice_init_varia.F
45      - undo resetting UVM=0 that has slipped in unnoticed in r1.49 and
46        caused zero ice-velocities for the B-grid code
47    o pkg/seaice/seaice_init_fixed.F
48      - fix a bug in the initialisation of the second metric terms
49        k2AtC and k2AtZ: k2AtC was set to the value of k2AtZ and k2AtZ was 0.
50      - this affects all seaice configurations with useCurviLinearGrid = .true.
51        and SEAICEuseDynamics = .true. (default) and SEAICEuseMetricTerms
52        = .true. (default)
53      - the only verification experiment affected is global_ocean.cs32x15:
54        icedyn, seaice, and seaice_dynmix (AD)
55    o pkg/thsice/thsice_diagnostics_state.F
56      - only for TARGET_NEC_SX: initialise all of tmpFld, so that overlap does
57        not contain garbage that can lead to surprises in diagstats_calc.F
58    o model/src:
59      - move bi,bj loops inside INTEGR_CONTINUITY ;
60      - call INTEGR_CONTINUITY directly from forward_step.F
61        (previously called from momentum_correction_step.F)
62      - call UPDATE_ETAH from integr_continuity.F and update initialise_varia.F,
63        forward_step.F and pkg/ecco/the_main_loop.F
64    o model/src/do_oceanic_phys.F:
65      - reset addMass to zero only if useICEFRONT ;
66      - separated k-loop for rhoInSitu calculation ;
67      - add 2 diagnostics for wVel*delta^k(Rho) at constant pressure (= WdRHO_P)
68        and at constant T,S (= WdRHOdP);
69      NOTE: change diagnostics WRHOMASS : this is now simply the Vertical transport
70        of In-Situ Density (Anomaly) (=wVel*rho^bar-k) (previously was Vertical
71        transport of locally-referenced potential density);
72        to recover old diag: (WRHOMASS)_old = (WRHOMASS)_new -1/2 * (WdRHOdP)
73    o gluemnc:
74      - replace ncrcat with ncks when adding variables to *.glob.nc
75      - change the way variables without record dimensions are handled so that
76        files that have variables with and without record variables can be glued:
77        add a record dimension with a new unique name to be able to differentiate
78        between variable with and without a-prior record dimensions. Remove
79        this record dimension before adding the variable to the *.glob.nc file.
80        This procedure automatically works also for grid.*.nc files that do not
81        have any record dimension.
82    o verification/cpl_aim+ocn:
83      - generate new reference output on baudelaire (gfortran, mpich2) (previously
84        from old aces-grid cluster, ao + ifort) and update 'run_cpl_test' script.
85    o pkg/obcs/obcs_calc_stevens.F:
86      - add code for northern and southern boundaries.
87      - reorder some loops to save some operations and so that drFBar can be scalar
88    o model/src:
89      - re-arrange extrapolation calculation in Adams-Bashforth S/R (affects machine
90        truncation) and add diagnostics for Adams-Bashforth tendency increment.
91      - update test-exp. AD output:
92        1D_ocean_ice_column, bottom_ctrl_5x5, lab_sea.noseaicedyn, obcs_ctrl;
93      and FWD output: exp4 (x3), fizhi-cs-32x32x40, fizhi-cs-aqualev20,
94        front_relax (x3), global_ocean.90x40x15 (x2), global_ocean.cs32x15 (x5),
95        global_ocean_ebm, ideal_2D_oce, internal_wave, isomip (x3), lab_sea (x4),
96        matrix_example, MLAdjust (x5), natl_box (x2), tutorial_advection_in_gyre,
97        tutorial_global_oce_in_p, tutorial_global_oce_latlon and
98        tutorial_plume_on_slope.
99    o pkg/diagnostics/diagstats_calc.F: add special code for TARGET_NEC_SX
100      that vectorises. This code uses 3 extra 2D fields, F90 array assignments
101      and F90 intrinsic routines SUM, MINVAL, MAXVAL, but since TARGET_NEC_SX
102      does not even come with an F77 compiler anymore, this should not be
103      a limitation
104    
105    checkpoint63e (2011/11/06)
106    o pkg/seaice adjoint of LSR:
107      - substantially rework STORE dirs.
108      - add new flag SEAICE_LSR_ADJOINT_ITER and parameter SOLV_MAX_FIXED
109        this flag will do SOLV_MAX_ITERS but only store SOLV_MAX_FIXED fields
110        and only perform SOLV_MAX_FIXED adjoint iters.
111        If flag SEAICE_LSR_ADJOINT_ITER is undef-ined, the store in the iteration
112        always goes to same record, meaning that the last forward field will be
113        the one used in the adjoint - an approximation.
114      - now produces non-zero LSR-related gradients, and acceptable gradients for
115        An's zonal (x-z) test case (to be checked in)
116      - lab_sea: produces acceptable gradients for lab_sea with forward/backward LSR
117        (but these are screwed up by the thermodynamics in the first place);
118        reduce from 4 to 3 timesteps to avoid t.d. issue as temporary solution;
119        output_adm.txt also reflects changes to seaice_lsr
120      - global_ocean.cs32x15:
121        * the "default" input_ad.seaice has been re-defined to always exclude dynamics
122          (output_adm.seaice.txt was updated)
123        * new input_ad.seaice_dynmix tests a forward LSR / backward free-drift
124          (output_adm.seaice_dynmix.txt)
125    o test-exp. exp4+stevens:
126      - switch off pTracers and nonHydrostatic (restart problems with NH); update output
127    o pkg/seaice (lsr solver):
128      - put coriolis term into FORCEX,Y (as in seaice_evp.F; previously in rhsU,V only);
129        update output (change truncation) of FWD test exp lab_sea & global_ocean.cs32x15
130      - fix SEAICEuseFREEDRIFT for new OBCS version (ndef OBCS_UVICE_OLD)
131      - new parameter "LSR_mixIniGuess" allows (if=2,4) to mix free-drift solution
132        into initial guess for linearised solver; use weight ~ (1/err)^2,4.
133      - compute (with new S/R) and print initial (+ free-driff sol. if available)
134        and final residual of linearised system.
135    o pkg/pp81: add diagnostics for vertical eddy viscosity and diffusivity
136      (requires new subroutines pp81_init_fixed.F/pp81_diagnostics_init.F)
137    o pkg/obcs: Stevens BCs (still only for east and west)
138      - fix Stevens BCs by using intermediate velocities of previous
139        time step as "baroclinic" contribution rather velocity of one grid cell
140        inside the boundaries; more consistent but makes the entire treatment
141        more complicated, requires new pickup files and two new S/Rs:
142        obcs_copy_uv_n and obcs_save_uv_n
143        keep old version with flag OBCS_STEVENS_USE_INTERIOR_VELOCITY
144        (undefined by default)
145      - silently move computation of some grid factors into separate loops to
146        save some recomputations
147      - add a hack for non-linear free surface
148      - add a verification experiment to exp4 that tests this code
149    o make gluemnc/xplodemnc work with (moron) non-GNU shell tools
150    
151    checkpoint63d (2011/10/25)
152    o pkg/obcs + seaice-dynamics:
153      - new implementation calls OBCS_APPLY_UVICE (in seaice_dynsolver.F) before
154        solving for uIce,vIce and prevent SEAICE_LSR or SEAICE_EVP to modify OB
155        values (consistent with an implicit method).
156      - add option OBCS_UVICE_OLD (in OBCS_OPTIONS.h, defined by default) to
157        return to older implementation (same results as before); note that none of
158        the "experimental" OBCS_SEAICE options are implemented in the new version.
159      - switch test exp. seaice_obcs to use new version (update output).
160    o pkg/seaice:
161      - add few stop (B-grid & CS-exch, B-grid & obcs, AUTODIFF & SEAICE_maskRHS)
162      - add parenthesis in Water-Ice drag calculations (evp & lsr);
163      - in seaice_lsr.F, simplify and fix AA3 setting in case sNx or sNy=1;
164        and fix case SEAICE_waterDrag=0 (but unstable if no or little seaice)
165      - update output of test exp lab_sea that uses evp or lsr (fwd+ad)
166        and global_ocean.cs32x15 (icedyn & seaice fwd+ad).
167    o pkg/layers:
168      - Include potential density as new coordinate (Thanks to David Munday)
169    o pkg/dic:
170      - Remove subroutine CALC_PCO2_APPROX_CO3 from carbon_chem.F and add
171        carbonate computation/output to CALC_PCO2_APPROX
172    o pkg/generic_advdiff
173      - make TAF generate code that vectorizes:
174        gad_dst3fl_adv_*.F, gad_u3c4_impl_r.F
175    o model/src:
176      - improve vectorization also for adjoint code of
177        solve_tridiagonal and solve_pentadiagonal. As this requires up to
178        5 new 3D-fields, this code is only turned on for the combination of
179        ALLOW_AUTODIFF_TAMC and TARGET_NEC_SX. Also remove error message
180        for singular matrix check (only for TARGET_NEC_SX).
181      - remove hard-wiring of CPP-flag ALLOW_SOLVERS_KLOOPINSIDE to
182        ALLOW_AUTODIFF. This flag now needs to be set outside of
183        solve_tri/pentadiagonal.F
184    o pkg/exf:
185      - fix previous modif in exf_readparms.F (revision 1.66: treatment of
186        optional namelist EXF_NML_OBCS).
187      - add many debug-print (to trace down where pkg/cal error msg comes from)
188    o pkg/mom_vecinv/mom_vi_hdissip.F
189      - rearrange loops so that vectorization is improved and in particular
190        the adjoint routine vectorizes. The code is a little longer now, but I
191        think easier to read.
192        Note: CPP-flag MOM_VI_ORIGINAL_VISCA4 is not tested.
193    o pkg/seaice:
194      - allow to specify initial seaice velocity from files (uIceFile,vIceFile)
195    o pkg/exch2:
196      - alternative code (without tile x tile matrix) for cumulated (global) sum;
197        used as default; keep using matrix version in adjustment.cs-32x32x1.
198    o tools/build_options:
199      - after merging some MPI and/or multi-threads specific optfiles so that
200        the modified default optfile support both built (using genmake2 -mpi
201        for the MPI built, using genmake2 -omp for OpenMP built),
202        move now obsolete optfiles to tools/build_options/unsupported/
203       (add copy of email sent to support list in doc/optfiles_changes.txt)
204    
205    checkpoint63c (2011/09/28)
206    o pkg/ebm:
207      - fix ebm_zonalmean.F for several procs in Ydir (nPy > 1); update output of
208        test exp. global_ocean_ebm (affects machine truncation, 12 digits for cg2d)
209    o pkg/seaice (SItracer pickup)
210    * Simple code for pickup of SItracer fields (#define ALLOW_SITRACER)
211      To be done:
212      - thorough testing of missing fields in S/R seaice_read_pickup
213      - thorough matching between generic tracers and specific fields used
214        (e.g. volume-weighted age, area-weighted age, salinity, ...)
215    o pkg/grdchk:
216      - all procs calculate and print finite-difference gradient (for testreport)
217      - change description output used by testreport;
218      - AD testing: also compare and report Finite-difference gradient;
219        => update all output_adm*.txt
220    o test exp. global_ocean_ebm:
221      - switch back useRealFreshWaterFlux (no problem anymore with run-off);
222        and turn on exactConserve; update (fwd) output.
223    o pkg/seaice (LSR):
224      - print to STDOUT number of solver iterations at SEAICE_monFreq interval.
225      - modify solver to deal cleanly with u/v switch at face edges (CS-grid):
226        * identical results with non-CS topology (but save up to half of EXCH calls)
227        * no much changes in cs-32 verification tests since no ice at face edges
228         (differences due to convergence criteria, since nb of iterations changed)
229        * expect some differences on lat-lon-cap grid.
230        update FWD results of global_ocean.cs32x15 test exp. (icedyn & seaice)
231    o pkg/exch2:
232      - add new CPP option to disable Cumul-Sum matrix (to save storage when using
233        many tiles); until alternative coding is added, just add a stop.
234    o pkg/kpp:
235      - move ptracer/salt correction to KPP diffusivity from calc_3d_diffusivity.F
236        to S/R KPP_CALC_DIFF_PTR (+ add tracer-index to argument list).
237    o optfiles:
238      - merged few MPI specific (*+mpi*) and multi-threads specific (*+mth) optfiles
239        into corresponding standard one, which now support different build:
240        (when using "genmake2 -mpi" for MPI built, "genmake2 -omp" for OpenMP built)
241      - add "darwin_amd64_gfortran" optfile (initially from Constantinos, tested by Gael)
242    o pkg/obcs (seaice):
243      - add missing EXCH for uIce,vIce after applying OBCS;
244      - remove S/R EXF_SWAPFFIELDS_X/Y , disable S/R EXF_SET_OBCS_X/Y by adding
245        argument = number of levels to S/R EXF_SWAPFFIELDS_XZ/YZ and S/R
246        EXF_SET_OBCS_XZ/YZ ; update obcs_exf_load.F;
247      - fix EXF_SET_OBCS_XZ/YZ for multi-threaded (assuming loaded arrays are shared)
248      - verification exp. seaice_obcs: split domain in 2 tiles ; add SIZE.h_mpi
249        and eedata.mth for MPI and mutlti-threaded testing.
250    o pkg/flt:
251      - make FLT EXCH working with multi-threads (and MPI + multi-threads);
252      - use buffer for floats IO (trajectories & profiles); size set in FLT_SIZE.h;
253      - fix pickup and trajectories + profiles output with multi-threads;
254      - add parameter to select group of fields to write along trajectory and
255        profile (default unchanged);
256      - only call PORT_RAND* function when flt_noise <> 0;
257      - add multi-threaded test for verification exp. flt_example.
258    o eesupp/src:
259      - fix S/R ALL_PROC_DIE for MPI+multi-threads.
260      - USE_OMP_THREADING: check that number of threads (from eedata) matches
261        actual number (from env.var. setting).
262    o pkg/ebm:
263      - fix multi-threading in ebm_area_t.F ; clean-up EBM.h header file.
264      - add multi-threaded test for verification exp. global_ocean_ebm
265    
266    checkpoint63b (2011/08/29)
267    o pkg/ebm:
268      - fix sign of runoff;
269      - update directly forcing fields (Qnet,EmPmR) to use standard
270        external_forcing_surf.F (remove ebm_forcing_surf.F);
271      - avoid loading forcing fields a 2nd time (1rst time from ini_forcing.F);
272      - set either tauThetaClimRelax (in data) or tauThetaZonRelax (in data.ebm)
273        and apply relaxation towards corresponding SST field (2-D map or ZonAver).
274      - update global_ocean_ebm parameters file data and update output (fwd+ad).
275    o verification/matrix_example:
276      - split domain in 8 tiles (2x4); add SIZE.h_mpi and eedata.mth for
277        MPI and mutlti-threaded testing.
278    o pkg/matrix:
279      - change name of S/R MATRIX_INIT to S/R MATRIX_INIT_VARIA ;
280      - fix for multi-tiles (add bi,bj indices to exp/impMatrixCounter);
281      - fix for multi-threaded (remove DATA statement);
282      - use standard DIFFERENT_MULTIPLE function;
283      - add MATRIX_OPTIONS.h
284    o verification/matrix_example:
285       To allow to split the domain in several tiles, change the domain size
286        from 31x31 to 32x32 by adding 1 row (on Southern side) + 1 column (on
287        Western side) of land points.
288    o (*_)write_pickup:
289      - fix few bugs in mypackage_read/write_pickup.F
290      - in MDS_WR_METAFILES calls, replace "myTime" by a local copy into
291        array of length 1 (was caught by compiler syntax-check).
292    o pkg/diagnostics (velocity potential solver):
293      - fix initialisation of main diagonal matrix (for overlap values)
294    o tools/build_options:
295      - towards single optfile for MPI and non-MPI built: merge few +mpi optfile
296        into previously non MPI one (linux_am64 pgf77,open64,pathf90,ifort11)
297      - linux_amd64_gfortran: merge +mpi_generic version into standard optfile:
298        * move IEEE flags to DEVEL section; take IEEE flags from +mpi_generic ;
299        * FAST case: for now, keep -O3 with ini_masks_etc.F in NOOPTFILES list;
300        and use "-devel" testreport option for standard testing on baudelaire.
301    o pkg/grdchk:
302      - Assume that all gradient-check position are within the same tile
303        corresponding to global indices (iGloTile,jGloTile) and that
304        positions (i,j indices or nbeg) are local to this tile;
305      - set tile local-indices and proc. number according to tile global-indices;
306      - remove grdchkwhichproc from namelist (retired param);
307      - send adjoint gradient to all procs so that all procs print it to STDOUT;
308      - switch on MPI test for global_ocean.90x40x15 AD test experiment.
309    o adding package bbl (Bottom Boundary Layer)
310      description in MITgcm/pkg/bbl/bbl_description.tex
311      example/test experiment in MITgcm_contrib/bbl
312    o adjoint verifications
313      - changed 5 experiments to multi-tiles
314        * global_ocean.90x40x15
315        * obcs_ctrl
316        * offline_exf_seaice
317        * tutorial_dic_adjoffline
318        * tutorial_tracer_adjsens
319        changed reference output for those that crossed tile boundaries
320        (changed choices of gradient check positions)
321      - with same tiling, switch on MPI test for the last 4 (add SIZE.h_mpi)
322      - temporary bug fix in grdchk_loc.F for obcs
323    o genmake2 & testreport
324      - add target "obj" (just for OBJFILES files) to Makefile;
325      - add option to specify FEXTRAFLAGS on command line.
326    o pkg/mypackage:
327      - remove bi,bj arguments from argument list of S/R MYPACKAGE_CALC_RHS
328    
329    checkpoint63a (2011/08/02)
330    o pkg/diagnostics (velocity potential):
331      - fix velocity-potential calculation when using OBCS: balance net inflow
332        at each level (new S/R OBCS_DIAG_BALANCE).
333      - fix some of the problems with OBCS in stream-function calculation.
334    o pkg/exf/exf_readparms.F
335      - make treatment of optional namelists (EXF_NML_04, EXF_NML_SGRUNOFF,
336        EXF_NML_OBCS) more consistent, so that you need not have these lists
337        in data.exf when they are not used.
338    o optim/optim_readdata.F:
339      - add some output about obcs variables that might help debugging
340      - add a check about nvarlength
341    o pkg/ctrl: once again, fix computation of endrec in s/r ctrl_init_rec
342    o pkg/diagnostics (velocity potential):
343      - fix mask for OBCS (still problems in stream-function with OBCS);
344      - add specific parameter (default = main code CG2D params) for solver;
345      - in case of poor convergence, use solution corresponding to lowest residual.
346    o pkg/seaice/seaice_growth.F: small changes that permit vectorizable
347      adjoint code. In general statements like tmpscal=fld(i,j) are problematic
348      and should be avoided where possible.
349    o model/src (rStar):
350      - include r* effect on reference-state (PhiRef) in totPhiHyd
351        (so that it's really the potential anomaly at the cell center);
352        affect solution only if z* with full pressure in EOS.
353      - test-exp global_ocean.90x40x15: reduce viscA4 (was not stable) and
354        update output (because of z* in totPhiHyd and viscA4 changes);
355      - keep the previous diagnostics as "PHIHYDcR" (closer to potential anomaly
356        @ constant r) until interpolation at constant r is implemented.
357    o pkg/diagnostics
358      - fix RCENTER diagnostics in case cell center is not at interface middle
359    o add code for TEOS-10 (www.teos-10.org, McDougall et al. 2011). Use
360      this eos with eosType = 'TEOS10', in data (PARM01). This eos implies
361      that THETA and SALT are "conservative temperature" and "absolute
362      salinity"
363    o pkg/ctrl
364      - fix computation of endrec in s/r ctrl_init_rec
365      - ctrl_pack/unpack_*: remove unused variables and some obsolete code
366    o pkg/seaice/seaice_growth.F
367      - fix recomputation with FENTY_AREA_EXPANSION_CONTRACTION code,
368        remove then obsolete STORE directives
369      - fix STORE directives for tice and tices, so that only the
370        appropriate part of the fields are stored (and not the entire
371        field); update global_ocean.cs32x15.seaice AD output.
372      - cosmetic changes: adjust CPP flags and indentation for better
373        legibilty
374    o pkg/autodiff: add mnc-output of adBottomDragFld (code contributed by
375      Chris Wilson)
376    o pkg/gmredi:
377       Add Sub-Meso Eddies parameterisation from Baylor (for now, disabled with TAF),
378       and test it in verification exp. "front_relax.bvp" (update output.bvp.txt)
379    
380    checkpoint63  (2011/07/11)
381    o pkg/exch2:
382     - rename+move: nTiles in W2_EXCH2_PARAMS.h --> exch2_nTiles in W2_EXCH2_TOPOLOGY.h
383     - exch2 version of Cumul-Sum routine: S/R W2_SET_MAP_CUMSUM set up the
384       (2*nTiles)x(nTiles) Cumul-Sum matrix and Master Proc collects all tiles X,Y
385       increments, calculates Cumul-Sum @ tile origin and sends results to each tile.
386    o pkg/diagnostics:
387     - deal with pairs of post-processed diags which are computed together; in
388       particular, re-order list of diags within 1 file to save 2nd computation.
389     - add S/R to compute velocity stream-function (called after velocity-potential
390       calculation) from divergence free transport -> new diagnostics "PsiVEL".
391     - add parameter to select grid-point location where PsiVEL == 0.
392    o eesupp/src:
393       new S/R to calculate cumulated sum on tiled array, corner grid-cell location
394       (specific S/R needed with exch2 topology - for now, just print an error msg)
395    o pkg/shelfice
396     - Implement friction velocity-dependent transfer coefficients following
397       Holland and Jenkins, JPO, 1999
398       Original code by M. Losch with small modifs.
399       Enable with CPP option SHI_ALLOW_GAMMAFRICT
400       and runtime flag SHELFICEuseGammaFrict
401    o verification lab_sea & global_ocean.cs32x15:
402     - use tools/xmakedepend (instead of cyrus_makedepend, in genmake_local):
403       does not miss some dependencies (but is slower) and also works with many files
404       (default makedepend limitation for AD built).
405     - use cyrus_makedepend in adjustment.128x64x1 (so that it still tested).
406    o pkg/diagnostics:
407     - add run-time parameter "useMissingValue" (def=False) to fill land-point
408        (i.e., where mask=0) with MissingValue ; used only in MNC output file.
409       This replaces CPP-option DIAGNOSTICS_MISSING_VALUE.
410     - Extend the use of "missing_value" setting from data.diagnostics for the case
411       of counter-diagnostics (where fraction-weight is zero). This applies both to
412       MNC and MDS output files.
413    o pkg/seaice/seaice_growth.F:
414      - add 'a priori' cap of latent heat flux based on actual mass considerations
415        when SEAICE_ADD_SUBLIMATION_TO_FWBUDGET is used in conjunction with the
416        non-legacy seaice_solve4temp.
417      - add diagnostic of the residual sublimation freshwater flux (the freshwater
418        flux taken from the ocean if the total actual latent heat fluxes exceed
419        the maximum)
420      - remove the CPP switch around the *_FWbySublim unit change and move diagnostic
421       fill for SIatmQnt, SIfwSubl, SIatmFW to the end of seaice_growth.F.
422      - add diagnostic of the actual sublimation freshwater flux (that is 0. ifndef
423       SEAICE_ADD_SUBLIMATION_TO_FWBUDGET) and of the latent heat flux (evap+sublim).
424      - bug fix : frWtrAtm needs a_FWbySublim ifdef SEAICE_ADD_SUBLIMATION_TO_FWBUDGET.
425      - bug fix : missing part to Martin's r_FWbySublim pathological case fix.
426    o verification 1D_ocean_ice_column:
427       made model domain truly 1x1x23 instead of 5x5x23 with only center cell (3,3,:) wet
428       update results
429    o pkg/diagnostics:
430     - Implement setting of "Post-Processed" diagnostics (corresponding to gdiag(5)='P')
431       which are not filled-up but computed from other diags ; In this case, the mate
432       diag points to the primary (filled-up) diag to used for post processing.
433     - Update Velocity-potential computation using post-processed diag framework.
434     ==> Change the ordering of fields and time-periods in MDS output file
435       when using periodic averaging: now writes one time record with the full set
436       of fields for this time period, then the next time reccord (it used to be
437       one field with the full set of time records then the next field).
438         Note: this is now similar to NetCDF (MNC) output file. <==
439    
440    checkpoint62z (2011/06/21)
441    o adjoint monitor:
442     - Add adjoint monitor output for packages exf, seaice
443       and update relevant testreport output
444    o pkg/seaice:
445     - re-order diags inits so that they appear in order in available_diagnostics.log
446     - added diags: hsnow thermo. rates of change, area preceeding ridiging process,
447       area/heff/hsnow preceeding thermodynamic growth/melt.
448     - modified diag: SIdA; output actual effect, as the description states.
449     - modified description: SIqneti, SIqneto, SIuheff, SIvheff, SIdAb*, HSNOW.
450     - retired redundant diags: SIyneg, SIfice, SIsnwice, SIthdgrh.
451       (SIyneg->SIdHbOCN; SIfice->SIdHbATC; SIsnwice->SIdHbFLO;
452        and SIthdgrh->SIdHbOCN+SIdHbATC+SIdHbATO)
453     - modified diags (2) : switch all SIdA*, SIdH*, SIdS* from delta to rates.
454     - added diagnostics for seaice generic tracers (SItr*).
455     - added SItrUnit and SItrNameLong run time param (for SItr* diags).
456     - in diag names, replaced 'PrTh' abbrev. of 'preceeding thermo' with 'PT'.
457     I. Fenty: 18-Jun-2011:
458     Minor changes to seaice package:
459     1) Retired old variables (A22, SEAICE_lhsublim, areaMax, areaMin, hiceMin) and
460        added some new ones (SEAICE_area_reg, SEAICE_hice_reg, SEAICE_area_floor)
461       - Differentiated "regularization variables" from "floor variables"
462        * areaMin became SEAICE_area_reg (old A22) and SEAICE_area_floor
463        * hiceMin became SEAICE_hice_reg (old hiceMin)
464          (with _reg meaning regularization variable)
465       - SEAICE_lhSublim becomes lhSublim, the sum of SEAICE_lhEvap and SEAICE_lhFusion
466        so as to ensure energy conservation when going between phases
467      - A22 was not used anywhere
468     2) Changed regularization procedure for heffActual and hsnowActual to ensure
469        well-boundedness and smooth adjoint in seaice_growth.F
470     3) Fixed a bug where seaice_solve4temp would not recognize ice-free grid cells
471        because the old regularization always set heffActual >= 0.05 cm
472     4) Changed the model so that the default behavior is to put a small (10^-5) "floor"
473        on AREA when HEFF > 0.
474      - went from requiring ALLOW_PRECLUDE_INFINITESIMAL_AREA to be defined to
475        requiring that DISABLE_AREA_FLOOR *not* be defined
476     Affected verifications:
477      - 1D_ocean_ice_column (output.txt output_adm.txt)
478      - global_ocean.cs32x15 (output.seaice.txt output_adm.seaice.txt)
479    o pkg/diagnostics:
480      - move MNC code from diagnostics_out.F into new diagnostics_mnc_out.F (2 S/R).
481      - rename S/R GETDIAG to DIAGNOSTICS_GET_DIAG and change type of 1rst argument
482        (was _RL, now integer) with option = 0 to retrieve all levels.
483      - add pieces of code to compute velocity potential at each level (new diagnostics
484        PhiVEL, works only when UVELMASS & VVELMASS are also turned on);
485        for now, using same params as CG2D (target-resisual, max Nb of iter ...).
486      - fix few issues with counter diagnostics in diagnostics_setdiag.F &
487        diagstats_setdiag.F (if diagnostic counter is itself a counter diag)
488        and in diagnostics_fract_fill.F (do not need a valid pointer for the
489        diagnostics counter-mate); check that definition of counter-diagnostic
490        includes a valid counter-mate (in diagnostics_set_levels.F).
491    o model/src (rStar):
492      - add rStar scaling factor in diags_phi_hyd.F (similar to calc_grad_phi_hyd.F);
493        affect solution only if z* with full pressure in EOS;
494        update output of test-exp global_ocean.90x40x15.
495    o pkg/seaice:
496      - introduce siEps=1e-5 parameter
497      - use areaMax in AREA update (part 4), consistent with ridging step (part 2.5).
498      - re-organize SEAICE_ADD_SUBLIMATION_TO_FWBUDGET code.
499      - introduce ALLOW_SITRACER and seaice_tracer_phys.F to handle generic seaice tracer.
500        For now it covers, and was tested for, ice salinity and age (attached to HEFF),
501        as well as ice cover age and ridging index (attached to AREA).
502        For now the run time parameters (in data.seaice/SEAICE_PARM03) are
503        SItrName (e.g. 'age') and SItrMate ('HEFF', which is the default, or 'AREA').
504        Up to SItrMaxNum=3 tracers can be used simultaneously.
505    o pkg/salt_plume:
506      -introduce SPsalFRAC run time parameter that sets the fraction of the
507       salt by-product of ice growth (SPsalFRAC*(1-SIsalFRAC)*salt typically)
508       that gets vertically redistributed (fluxed down) by pkg/salt_plume.
509    o model debug options:
510      - Switch reading of debugMode from S/R INI_PARMS (parameter file "data", stored
511        in PARAMS.h) to S/R EESET_PARMS (parameter file "eedata", stored in EEPARAMS.h).
512      - Refine debug-msg printing selection (3 new levels):
513        debugMode  : controls printing of debug messages (sequence of S/R calls).
514        debugLevel : controls printing of algorithm-relevant auxiliary/debug messages
515         debLevZero =  0 ; /* level of disabled aux. msg printing */
516         debLevA =  1 ; /* level of minimum  aux. msg printing */
517         debLevB =  2 ; /* level of low aux. print (report read-file opening)*/
518         debLevC =  3 ; /* level of moderate debug prt (most pkgs debug msg) */
519         debLevD =  4 ; /* level of enhanced debug prt (add DEBUG_STATS prt) */
520         debLevE =  5 ; /* level of extensive debug printing */
521        New debugLevel default: with default debugMode value (=F),
522          = 2 (debLevB) or = 1 (debLevA) in case ALLOW_AUTODIFF is defined.;
523          and if debugMode=T, default debugLevel = 4 (debLevD).
524        Relation with previous settings:
525         debLevB (=2) corresponds to former debLevA (=1)
526         debLevD (=4) corresponds to former debLevB (=2)
527        Note:
528         a) if debugLevel=0, skip WRITE_GRID call when nIter0 > 0 (same as before);
529         b) default debugLevel=1 is convenient in AD runs (avoid many file opening msgs);
530            to recover previous default, set debugLevel=2 (e.g. AD-test hs94.1x64x5)
531      - Add new parameter (printResidualFreq, read from PARM02 namelist) to print
532        detailed CG solvers convergence; off (=0) by default, except if debugLevel=5.
533    o pkg/obcs:
534      - change OBCSfixTopo default from True to False (should not change the results);
535        keep OBCSfixTopo=T in verification-exp. seaice_obcs.
536    o pkg/thsice:
537      - fix bug in thsice_calc_thickn.F (was introduced in version 1.18) in
538        2nd layer seaice sublimation (unlikely to happen)
539      - use Interior mask for OBCS in thsice_advection.F (similar to what is
540        done in gad_advection & seaice_advection).
541    o adjoint:
542      bug fix spotted by Gael Forget:
543      seaice_advection and thsice_advection still had
544      legacy CPP options to avoid CS corner updates for adjoint
545    o pkg/seaice:
546      => Change some of the defaults (2011/05/29):
547         - change SEAICEuseFluxForm default (from False to True)
548         - change DIFF1 default (from 0.004 m/s to 0. m/s)
549         And print warnings if DIFF1 is not set in data.seaice and centered
550          avection scheme is used without any diffusion.
551      also:
552      - fix seaice_diffusion calls in default AdvScheme part of seaice_advdiff.F;
553      - set SEAICEdiffKh[] default in the same way as SEAICEadvSch[]
554      - stop if DIFF1<>0 with SEAICEadvScheme <> 2, if DIFF1<>0 with any
555        other non-zero SEAICEdiffKh[] diffusivity, if SEAICEadvSalt=T with
556        #undef SEAICE_VARIABLE_SALINITY, if SEAICEadvAge=T with #undef SEAICE_AGE.
557      update results of test exp.:
558         lab_sea: output.fd (switch to AdvScheme=33 with diffKh=20)
559             output.hb87, output_adm.evp (SEAICEuseFluxForm=T and diffKh=200)
560             output_adm.noseaicedyn (SEAICEuseFluxForm=T)
561         offline_exf_seaice: output.seaicetd, output_adm (SEAICEuseFluxForm=T)
562         seaice_obcs: output (SEAICEuseFluxForm=T)
563      and prescribe old default for SEAICEuseFluxForm (=F) and DIFF1 (=0.004)
564          for standard fwd & AD lab_sea tests (to keep the same output).
565    o pkg/seaice/seaice_growth.F:
566      - use Ian Fenty's capping formulas for actual ice
567      thickness thoughout EVOLUTION branch.
568      - put treatment pathological case #2) in CPP brackets
569      (ALLOW_AVOID_INFINITESIMAL_AREA, undef by default).
570      - update global_ocean.cs32x15 and 1D_ocean_ice_colum results accordingly.
571    o pkg/seaice:
572      - seaice_diffusion.F : remove the min(DX,DY) factor permanently;
573      pass the Laplacian diffusivity (in m^2/s) diffKh as a parameter;
574      also pass fac as a param, which can be 1. (to update the tendency
575      field) or the time step (to update the field itself).
576      - seaice_advdiff.F: for multidim, call seaice_diffusion with
577      e.g. SEAICEdiffKhHeff and with fac=1; for single-dim, call
578      seaice_diffusion with e.g. SEAICEdiffKhHeff and with fac=time step.
579      - SEAICE_PARAMS.h, seaice_readparms.F, seaice_check.F :
580      hooks to handle SEAICEdiffKhHeff, SEAICEdiffKhArea, etc.
581    o pkg/seaice:
582      diffusion with centered advection scheme (diffus.F & advect.F):
583      - simplify S/R DIFFUS (put deltaT & DIFF1 factor outside, move EXCH outside)
584        to just compute the laplacian of input-field.
585      - unroll k loop (harmonic,biharmonic diff) in advect.F to save 1 exch call.
586      - fix flux-form version in diffus.F to conserve tracer.
587      update output of lab_sea.fd & lab_sea.hb87 (1rst set of modif affects
588       machine truncation) and lab_sea.salt_plume (conservative flux-form modif)
589    
590    checkpoint62y (2011/05/26)
591    o pkg/seaice:
592     - seaice_growth.F : in EVOLUTION branch, always include
593       a_QSWbyATM_cover in qnet (as it should be).
594     - verification/global_ocean.cs32x15 : update results accordingly
595       (output.seaice.txt output_adm.seaice.txt).
596    o pkg/seaice + obcs:
597     - use maskInW & maskInS in multi-dim advection and biharmonic diffusion:
598       equivalent of assuming no tracer gradient outside the OB region.
599       update output of seaice_obcs (uses DIFF1 <>0 => biharmonic diffusion)
600     - remove calls to OBCS_COPY_TRACER after EXCH calls (no longer needed
601       after changes above);
602     - obcs+seaice cleaning: apply seaice-tracer OB values to tracer field
603       only at OB location (instead of over a band of OLx width).
604    o pkg/seaice:
605     - fix wrong indices in old (non Flux-Form) diffusion default S/R diffus.F
606       (dxG(I+1, ...) changed to dxG(I, ...), no impact on Lat-Lon grid)
607    o pkg/obcs:
608      - split header file "OBCS.h" into 4 separated files:
609        OBCS_PARAMS.h, OBCS_GRID.h, OBCS_FIELDS.h & OBCS_SEAICE.h
610       Note: OBCS_PARAMS.h & OBCS_GRID.h can be included without OBCS_OPTIONS.h
611         (contain no conditional statement which depends on OBCS options).
612      - move "useOBCSYearlyFields" from "data.obcs" (hold in OBCS_PARAMS.h)
613        to parameter file "data.exf", namelist EXF_NML_OBCS (in EXF_PARAM.h).
614    o ctrl, cost, grdchk & autodiff pkgs:
615      - make options file more standard (like other {PKG}_OPTIONS.h file but
616        with AD_CONFIG.h); clean-up some of the included header files.
617    o pkg/obcs:
618      - do not mask tracer when applying OB (tracer == 0 could generate problems)
619      - apply tracer OB values to tracer field only at OB location (instead of
620        over a band of OLx width)
621      - clean-up obcs_apply_w.F & obcs_apply_eta.F (since less calls to these S/R)
622      - remove OBCS_MULTIDIM_OLD_VERSION code in gad_advection.F and remove
623        obcs_apply_tloc.F & obcs_apply_sloc.F
624    o obcs in model/src:
625      - call OBCS_APPLY_W only if NonHydrostatic.
626      - call OBCS_APPLY_ETA only if NonLinFreeSurf.
627      - reset dEtaHdt and wVel to zero outside OB interior region ;
628      - leave tracer unchanged outside OB interior region: This has no effect
629        on the solution but just to prevent unrealistic tracer value outside OB.
630      - zero out velocity outside OB interior region: This has no effect on
631        the solution but just to prevent unrealistic velocity outside OB.
632    o obcs and non-lin free-surf:
633       move call to OBCS_APPLY_R_STAR from update_r_star.F to calc_r_star.F
634       and call to OBCS_APPLY_SURF_DR from update_surf_dr.F to calc_surf_dr.F
635       + add argument "etaFld" to OBCS_APPLY_R_STAR & OBCS_APPLY_SURF_DR:
636       this fixes missing EXCH + get consistent eta OB value (+ fix restart).
637       update results of test-exp. exp4(nlfs).
638  o exp4 (nlfs) test-exp:  o exp4 (nlfs) test-exp:
639     use OBC for Eta at Western & Eastern OB (to test prescribing Eta     use OBC for Eta at Western & Eastern OB (to test prescribing Eta
640     with NonLin-FreeSurf); update output.nlfs.txt     with NonLin-FreeSurf); update output.nlfs.txt
# Line 11  o obcs and 2d/3d solver norm: Line 642  o obcs and 2d/3d solver norm:
642     use interior masks (maskInC) to cancel out cg2d & cg3d matrix coeff at OB     use interior masks (maskInC) to cancel out cg2d & cg3d matrix coeff at OB
643     and outside OB interior region (will allow to place OB further inside the     and outside OB interior region (will allow to place OB further inside the
644     domain). Depending on the domain, can affects cg2d-Norm (previous     domain). Depending on the domain, can affects cg2d-Norm (previous
645     cancelation outside OB was only partial), e.g. in exp4 & obcs_ctrl,     cancellation outside OB was only partial), e.g. in exp4 & obcs_ctrl,
646     and cg3d-Norm (previous Norm was computed before canceling OB terms),     and cg3d-Norm (previous Norm was computed before canceling OB terms),
647     e.g. in tutorial_plume_on_slope.     e.g. in tutorial_plume_on_slope.
648    - update output of exp.: exp4 (x2), obcs_ctrl and tutorial_plume_on_slope.    - update output of exp.: exp4 (x2), obcs_ctrl and tutorial_plume_on_slope.
Legend:
Removed from v.1.1436  
changed lines
  Added in v.1.1542
  ViewVC Help
Powered by ViewVC 1.1.22