/[MITgcm]/MITgcm/doc/tag-index
ViewVC logotype

Diff of /MITgcm/doc/tag-index

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph | View Patch Patch

revision 1.1462 by jmc, Wed Jun 22 19:17:36 2011 UTC revision 1.1636 by dimitri, Mon Mar 26 01:47:07 2012 UTC
# Line 4  $Name$ Line 4  $Name$
4      Notes on tags used in MITgcmUV      Notes on tags used in MITgcmUV
5      ==============================      ==============================
6    
7    o pkg/frazil:
8      move FrzForcT diag from frazil_diagnostics_state.F to frazil_calc_rhs.F
9      http://mitgcm.org/pipermail/mitgcm-devel/2012-March/005384.html
10    o model/src/config_check.F: add a check for OLx>sNx/OLy>sNy
11    o verification/lab_sea
12      * #undef SEAICE_EXCLUDE_FOR_EXACT_AD_TESTING
13      * #define ALLOW_SST_CONTROL & ALLOW_SST_CONTROL
14      * nTimeSteps 3 -> 4
15      * changed reference output accordingly
16    o pkg/ctrl:
17      * fix ctrl_get_gen for xx_sst, xx_sss
18    o pkg/fizhi:
19      - fix 2 calls to S/R GRD2MSC (argument igrd) in update_earth_exports.F
20        update results of exp. fizhi-cs-32x32x40 (fail with only 6 digits for cg2d)
21      - by default, use new version of S/R GETPWHERE (#define TRY_NEW_GETPWHERE);
22        fix few out-of-bounds indices in referencing vars (initialise igrd to 1);
23        clean-up fizhi_turb.F (remove unused & uninitialised qdiaglsm array).
24    o pkg/gmredi:
25      - add diagnostic of Redi (main diagnonal) vertical diffusive flux of Temp
26    o pkg/fizhi:
27      - fix few initialisation and multi-tile Pb: aqualev & gridalt now pass the
28        (old)aces open64 tuv test.
29    o pkg/icefront: fix bug and reorder loop in icefront_init_varia.F
30    o pkg/mom_vecinv:
31      - fix 1 loop range in mom_vecinv.F to be like all the other loops which
32        set/update gu,gv/Diss (fix Pb of uninitialised fVerUkp in admom_vecinv
33        with non-lin free-surf).
34    o model/src: move k-loop outside of i/j-loops when (re-)computing R_low
35      in ini/update_masks_etc.F in order to avoid -O3 optimization problems with
36      some compilers (gfortran 4.6.0 on MacOS)
37    o momentum:
38      - separate fVer?(:,:,kUp) & fVer?(:,:,kDown) in argument list of MOM_FLUXFORM
39        & MOM_VECINV subroutines (to help TAF). This fixes Pb of uninitialised
40        fVer?(kUp) in admom_fluxform with non-lin free-surf or bottom control.
41    
42    checkpoint63k (2012/03/17)
43    o model/src:
44       - selectAddFluid (ALLOW_ADDFLUID): add missing term in horizontal momentum
45         flux-form (mom_fluxform.F) and vertical momentum (calc_gw.F) equations.
46       - SOLVE_DIAGONAL: switch default to use adjoinable & vectorized version
47         (#undef SOLVE_DIAGONAL_LOWMEMORY); update output of exp. front_relax.bvp.
48    o model/src: solve_*diagonal.F
49       - replace division with multiplication by inverse (similar to original version)
50         update output of AD exp. global_ocean.90x40x15.
51       - fix pkg/gmredi/gmredi_calc_psi_bvp.F & pkg/ggl90/ggl90_calc.F
52         to enable the use of the vectorized & differentiable solve_tridiagonal.F
53       - test exp. global_ocean.90x40x15/input_ad: switch to advection scheme 20 for
54         vertical advection (to get solve_tridiagonal tested in AD mode).
55    o pkg/seaice: ECCO-CLIVAR merge:
56      1. seaice AREA relaxation
57         * CPP option: SEAICE_ALLOW_AREA_RELAXATION
58         * runtime flag: SEAICE_tauAreaObsRelax
59      2. modified global mean cost imbalance code: CPP option
60          ALLOW_SSH_GLOBMEAN_COST_CONTRIBUTION
61    o another iteration on solve_*diagonal.F
62       Make choices independent of AUTODIFF
63       Default will be the adjoinable vectorized version.
64       Alternative choices are:
65       * non-adjoinable original version with low memory footprint:
66         #define SOLVE_DIAGONAL_LOWMEMORY
67       * still adjoinable but does not vectorize (k as inner-most loop):
68         #define SOLVE_DIAGONAL_KINNER (keeping SOLVE_DIAGONAL_LOWMEMORY undef)
69    o testreport
70     - add option to use a home made wrapper around "make"
71     - remove MITGCM_IEEE env. variable (no longer active)
72    o pkg/shelfice
73     - improve computation of friction velocity for velocity dependent
74       exchange coefficients: include velocities into SHELFICEBoundaryLayer
75       block to average velocities vertically
76     - add TAF store directives for SHI_ALLOW_GAMMAFRICT
77    o Modify diagonal solvers, now three versions (upon request):
78      #ifndef SOLVE_DIAGONAL_AUTODIFF
79        1. default version (dating back a while ago)
80      #else /* def SOLVE_DIAGONAL_AUTODIFF */
81      # ifdef SOLVE_DIAGONAL_KINNER
82        2. adjoinable version with k-innermost loop (G. Forget)
83      # else
84        3. adjoinable vectorized version of 2.
85      # endif
86      #endif /* SOLVE_DIAGONAL_AUTODIFF */
87      All flags are currently set within routines, but could/should be moved to CPP-options.
88      Array bounds for 1. are as before, for 2.,3. cover the entire domain
89      (could be changed for 1. too).
90    o verification/lab_sea (fwd):
91      - update the 4 fwd lab_sea test experiment: no longer SEAICE_GROWTH_LEGACY,
92        use 7 categories (except hb87), new solve4temp params (except salt_plume),
93        constant salinity (=4) or variable salinity (salt_plume) done through
94        SItracer.
95    o pkg/seaice:
96      - rename parameters: SIsalFrac to SEAICE_saltFrac & SIsal0 to SEAICE_salt0;
97      - remove old parameters ( SEAICE_freeze, SEAICEturbFluxFormula, SEAICE_gamma_t,
98         SEAICE_gamma_t_frz, SEAICE_availHeatTaper & SEAICE_availHeatFracFrz)
99        from SEAICE_PARMS.h ; still need to fix seaice_cost_sst.F (broken when
100        SEAICE_freeze got retired) but already better than previously with
101        SEAICE_freeze=123456.7 deg.C;
102      - move setting of facOpenGrow/Melt from SEAICE_INIT_FIXED to SEAICE_READPARMS
103        (safer multi-threaded setting); always set SEAICEuseEVP;
104      - setting of ocean-ice turb. flux coeff: moved from SEAICE_CHECK to
105        SEAICE_READPARMS & SEAICE_INIT_FIXED (this fixes wrong summary report);
106        stop if multiple specifications for the same coeff; make sure default
107        SEAICE_mcPheePiston is compatible with drF(1) & deltaT.
108    o pkg/obcs:
109      - allow to switch to upwind 1rst order advection scheme for the advective
110        flux computation at the open-boundary; disabled for adjoint built.
111    o pkg/ptracers:
112      - rename PTRACERS_RESTART.h -> PTRACERS_START.h
113      - rename ptracers_fields_blocking_exchanges.F -> ptracers_fields_blocking_exch.F
114      - add parameter to decide when to start a tracer; use internal flag to
115        know which tracer to step-forward; switch this internal flag at the top
116        of forward_step.F (new S/R PTRACERS_SWITCH_ONOFF); for now, not enabled
117        for adjoint built.
118    o pkg/seaice:
119      - add SEAICE_SIZE.h anywhere in the code where SEAICE.h is included ;
120      - move MULTDIM declaration and setting from SEAICE.h to SEAICE_SIZE.h ;
121      - keep experiment offline_exf_seaice truly single category (set MULTDIM=1).
122    o pkg/ecco:
123      - fix writing of output file DiagnosCost_ClimSalt/Theta
124        and DiagnosCost_DriftSalt/Theta (if multi-tiles per proc).
125    o pkg/seaice:
126      - add missing initialisation of COR_ICE array in dynsolver.F
127      - merging SEAICE_MULTICATEGORY define and undef cases. Now the same code is
128        compiled either way, and is tested in all exps (multidim was only tested
129        in lab_sea ad before).
130      - cosmetic change to prepare for future addition of ITD. no change to results.
131        no defaults change.
132      - added run time param SEAICE_multDim (7 for SEAICE_MULTICATEGORY, 1 otherwise).
133      - by lack of adequate verification experiments, I further used custom versions
134        of global_ocean.cs32x15 to test multicat or not, with pickup or not. All
135        should be correct.
136      - avoid recomputations in ad.
137    o array initialisation in adjoint mode:
138      1) pkg/mom_common/mom_calc_ke.F:
139        add full array initialisation of KE inside mom_calc_ke.F (ALLOW_AUTODIFF_TAMC):
140        The S/R which calls MOM_CALC_KE initialises KE but in some recomputation
141        part this initialisation is gone, resulting in Floating Point Exception
142        (caught by open64 compiler with debug option).
143      2) model/src/convective_weights.F
144        set output convectCount over the full array range (instead of doing
145        an update): this fix a similar issue when called within recomputation (adjoint)
146        which could by-pass the initialisation (normally done in the caller S/R).
147    o pkg/seaice:
148      - final version of turbulent flux params, as agreed at MIT ice meet:
149           SEAICE_mcPheePiston (default is ~ 0.000875)
150           SEAICE_mcPheeTaper (default is 0.)
151           SEAICE_frazilFrac (defualt is 1.)
152           SEAICE_mcPheeStepFunc (default is false)
153      - changes results at trunction error level
154      - ifdef SEAICE_EXTERNAL_FLUXES, disallow SEAICE_waterAlbedo
155    o added pkg/frazil:
156      - see frazil_description.tex for details
157      - verification experiment is global_with_exf/input.yearly; changes output.yearly.txt
158    o pkg/shelfice/shelfice_thermodynamics.F
159      - fix exponents for velocity dependent exchange coefficients: change
160        from 2/3(=0) to 0.66666666666666667
161      - move computation of velocity dependent exchange coefficients into
162        separate loop, so that it applies to both thermodynamics
163      - move some divisions by constants out of loops
164    
165    checkpoint63j (2012/02/16)
166    o pkg/seaice:
167      - overhaul of seaice_summary.F after feb 2012 clean-up of seaice_growth.F etc.
168      - SItracer:  added run time params, and allow coupling to ocn salinity.
169    o pkg/seaice: remove (almost) all divisions by constants within loops
170      in seaice_growth.F and seaice_solve4temp.F, this changes (only) the cg2d
171      results of global_ocean.cs32x15.seaice from 16 to 11 digits (but only
172      those, caused by 1/QI -> recip_QI) -> update output.seaice.txt,
173      output_adm.seaice_dynmix.txt and also lab_sea: output_adm.evp.txt
174    o pkg/seaice :
175      - simplify McPhee tapering, and allow to use it with SEAICEturbFluxFormula
176        = 1 or 2, using newly added run time parameter SEAICE_availHeatTaper.
177      - fix d_AREAbyATM, d_AREAbyOCN, d_AREAbyICE diags I broke in r1.148.
178      - add permanent SItflux diag that corresponds to TFLUX but includes
179        ice+snow. Hence SItflux-TFLUX should match the ice+snow heat budget.
180      - allow activation/testing of a fix for suspected missing term in
181        ocn-ice heat budget (to be confirmed). To test this, you want to
182        undef SEAICE_DISABLE_HEATCONSFIX, and then set the run time param
183        SEAICEheatConsFix to .TRUE. that also allows the 'SIaaflux' diagnostic.
184      - no change in results, fwd or ad.
185    o global_ocean.cs32x15/results: 3 changes following from the pkg/seaice commit below:
186      - switch to variable freezing point.
187           Results change : cg2d -> 1 digits; ad -> 3-6-6 digits.
188      - bug fix : the sublimation term that was missing is now activated.
189           Results change : cg2d -> 2 digits; ad -> 8-6-6 digits.
190      - bug fix : flooding sign term for SIsal0.NE.0.
191           Result change : cg2d -> 8 digits; ad -> 11-12-9 digits.
192    o pkg/seaice:
193      - unified freezing point treatment : the old SEAICE_VARIABLE_FREEZING_POINT
194        is now the default, and the old default constant freezing point is recovered
195        with SEAICE_tempFrz0    = -1.96,
196             SEAICE_dTempFrz_dS = 0.,
197      - retire SEAICE_freeze (= the old way of specifycing the constant freezing point)
198      - remove ALLOW_SEAICE_FLOODING brackets; run time switch is already there.
199      - bug fix (thanks to M. Losch) : the sublimation term that was missing is now
200        activated. To reproduce old results with this bug define SEAICE_DISABLE_SUBLIM.
201      - bug fix (silly me) : flooding sign term (seaice_growth.F r 1.149line 1211)
202        was wrong for SIsal0.NE.0. Changes cs32x15 results (see above item for detail).
203      - bug fix (thanks to O. Jahn) : area loss for melting  got messed up in
204        seaice_growth r149 for legacy branch (no results change).
205      - introduce SEAICE_CAP_SUBLIM : caps sublimation heat flux in solve4temp (code
206        from I. Fenty).
207      - results did not change except for global_ocean.cs32x15, mostly due to the
208        switch to variable freezing point (see above item for detail).
209    o pkg/thsice:
210      - fix and simplify interface to salt_plume pkg ; diagnose directly amount of
211        seawater freezing in thsice_calc_thickn (not used).
212    o pkg/seaice: turbulent flux term specification via run time params.
213      - replace CPP switches with run time switches to facilitate testing
214      - retired CPPs : MCPHEE_OCEAN_ICE_HEAT_FLUX,
215                       GRADIENT_MIXED_LAYER_TURBULENCE_FACTOR
216      - added runtime parameter : SEAICEturbFluxFormula
217      - move Mcphee constants to SEAICE_PARAMS.h
218      - seaice_readparms.F : read turbulent flux term params (SEAICEturbFluxFormula;
219                 SEAICE_availHeatFrac/Frz, or SEAICE_gamma_t/_frz if apply);
220                 remove seaice_summary call (moved to seaice_init_fixed)
221      - seaice_init_fixed.F : set SEAICE_availHeatFrac/Frz depending on
222        SEAICEturbFluxFormula, and seaice_summary call (moved from seaice_readparms)
223      - seaice_summary.F : add missing report of read turbulent flux term set up
224                           and SITRACER.
225      - seaice_check.F : check range; inform and stop if retired CPPs are used
226                         (incl. SEAICE_AGE).
227      - seaice_growth.F : unified use of SEAICE_availHeatFrac/Frz, without
228             CPP switch, same computation as before for the different options.
229      - change results at the truncation level.
230    o pkg/seaice:
231      - remove un-used parameters LAD & MAX_TICE ; add new run-time parameters:
232        useMaykutSatVapPoly (default=F), postSolvTempIter (default=2) and
233        SEAICE_wetAlbTemp (default=-1e-3). Remove option SEAICE_SOLVE4TEMP_LEGACY.
234      - update verification/*/input*/data.seaice:
235        to reproduce previous results with former #defined SEAICE_SOLVE4TEMP_LEGACY
236        code, set useMaykutSatVapPoly=T & postSolvTempIter=0 ;
237        and to reproduce previous results with former non-SOLVE4TEMP_LEGACY code,
238        set SEAICE_wetAlbTemp=0 & SEAICE_snowThick=0.
239    o pkg/seaice/seaice_solve4temp.F (SOLVE4TEMP_LEGACY):
240      - remove LEGACY code for solving for tsurf (A1,A2,A3) but maintain the same
241        algorithm (same choice: useMaykutPolySatVap=T, postSolvTempIter=0);
242        difference in results only due to machine truncation.
243      - remove MAX_TICE (tsurf is always =< TMELT anyway); keep MIN_TICE if using
244        MaykutPolySatVap; keep MIN_LWDOWN.
245      - adapt SEAICE_MODIFY_GROWTH_ADJ code (untested) to non-legacy formulation.
246      - update output of verification exp. lab_sea (4 fwd: 11 cg2d digits except hb87,
247        + 3 AD: 6 digits except evp) and offline_exf_seaice.seaice (12 digits).
248    o pkg/salt_plume:
249      - isolate saltPlumeFlux array exch into a specific S/R called from
250        do_oceanic_phys.F
251      - add interface to pkg/salt_plume (filling of saltPlumeFlux) in pkg/thsice.
252    o verification:
253      - move untested set-up to MITgcm_contrib/verification_other.
254    o pkg/seaice:
255      - retire old way of SEAICE_AGE. Now replaced with ALLOW_SITRACER.
256    o pkg/seaice:
257      - seaice_solve4temp.F (keeping results unchanged):
258        * add 2 future run-time params to select which saturation vapor pressure
259          formula is used and how post-iteration fluxes are set.
260          Temporary set these 2 params according to option SOLVE4TEMP_LEGACY;
261        * New piece of code (not used) to update surf. atmos. heat flux F_ia using
262          the linearized expression to stay consistent with tsurf finding.
263      - seaice_freedrift.F avoid floating exception in sqrt(y) since y=sqrt(x*x)-x
264        can be < 0.
265    o pkg/seaice/seaice_solve4temp.F (SOLVE4TEMP_LEGACY undef):
266      - remove from F_ia (and from it's derivative dFiDTs1) the contribution of
267        conductive heat flux F_c , and add it explicitly when updating tsurf as
268        solution of: Fc = Fia + d/dT(Fia - Fc) *delta.tsurf
269        so that now F_ia has a consistent meaning through the entire routine.
270        This causes differences at truncation level: update output of fwd exp.
271        global_ocean.cs32x15.seaice.
272    o pkg/seaice:
273      - lots of editing/cleaning in seaice_solve4temp.F + better documentation
274        of arrays, sign/direction of fluxes; no effect on results.
275      - replace hard coded 273.16 (=previous value of celsius2K) by celsius2K
276        in seaice_budget_ocean.F & seaice_solve4temp.F (SOLVE4TEMP_LEGACY part);
277        note: this should have been done before changing celsius2K default.
278      - to keep results unchanged, add back old value of celsius2K in verification
279        exp. input*/data : lab_sea (AD), offline_exf_seaice (fwd+AD) & seaice_obcs
280      - replace hard coded seawater freezing temp in seaice_solve4temp.F (part
281        SOLVE4TEMP_LEGACY) of 271.20 (=previous value of celsius2K + default
282        value of SEAICE_freeze) by celsius2K+SEAICE_freeze so that seawater
283        freezing temp is consistent with value in seaice_growth.F ; this causes
284        differences at machine truncation level: update lab_sea AD output (3/4).
285    o pkg/seaice:
286      - mask (in exf_init_fixed.F) atemp,aqh,evap,precip,runoff,lwflx,areamask
287        and climsst/sss even when using seaice (to prevent calculation that might
288        use SST on land); does not affect any verification exp.
289      - apply mask to taux,tauy (in seaice_get_dynforcing.F); update output
290        of lab_sea.fd & lab_sea.hb87 and global_ocean.cs32x15.seaice_dynmix.
291    o pkg/seaice/seaice_growth.F: add mask to avoid non-zero ice thickness
292      over land (non-legacy code)
293    o vectorize salt_plume package:
294      - add extra code to salt_plume_frac and salt_plume_tendency_apply_s
295      - this code computes plumebk everywhere (also over land), thus requires
296        code to avoid divisions by zero and catch the case of kLev=Nr.
297      - efficiency of salt_plume_frac is still sub-optimal
298    o tools (genmake2):
299      - fix makefile NAME specification (option: -makefile NAME) by adding
300        "-f $MAKEFILE" in few places where it was missing including makedepend
301        command (contribution from Paul).
302    
303    checkpoint63i (2012/01/24)
304    o model/src:
305      - add factorized versions of some EOS code to find_rho.F,
306        define USE_FACTORIZED_EOS to turn it on (default for TARGET_NEC_SX)
307    o model/src:
308      - add celsius2K to namelist PARM01; remove unused recip_rhoNil from PARAMS.h;
309      - change default celsius2K from 273.16 to 273.15
310      - to keep results unchanged, add back old value of celsius2K in verification
311        exp. input*/data : aim.5l_cs, 1D_ocean_ice_column, lab_sea (fwd),
312         global_ocean.cs32x15(seaice) & cpl_aim+ocn(input_atm).
313    o model/src: add a little initialisation trick to find_rho.F and find_alpha.F
314      to make TAF generate vectorizable code
315    o pkg/seaice/seaice_evp.F: add code (copied from CICE) that avoids underflows.
316       Turn on by defining SEAICE_EVP_ELIMINATE_UNDERFLOWS. Most compilers
317       have flags that do this more efficiently.
318    o pkg/diagnostics/diagstats_calc.F
319      - for TARGET_NEC_SX fix the treatment of the scaling factor tmpFac=scaleFact
320    o pkg/obcs (with exch2):
321      - derive OB indices in overlap region from OB-InsideMask (in obcs_init_fixed.F)
322        and remove code (in obcs_readparms.F) which was based on EXCH of indices
323        (through buffer) and did not account for exch2 (e.g., CS-grid) topology.
324    o pkg/exf and seaice exp:
325      - change offline_exf_seaice.seaicetd test exp. to use default DIFF1 value (=0)
326        so that switching off area & heff advection flags does not affect results.
327      - change default EXF_LWDOWN_WITH_EMISSIVITY to #define in EXF_OPTIONS.h
328      - keep exp. seaice_obcs & 1D_ocean_ice_column(ad) unchanged (using #undef
329        EXF_LWDOWN_WITH_EMISSIVITY) and, using pkg/exf default emissivities, update
330        results of verification experiments: 1D_ocean_ice_column(fwd),
331        global_ocean.cs32x15.seaice(fwd+ad) & seaice_dynmix(ad), lab_sea (all 8)
332        and offline_exf_seaice (all 4).
333    o pkg/seaice:
334      - remove array YNEG, RIVER, TMIX (replaced by local var) from common block;
335        remove also areaNm1 & hEffNm1 when SEAICE_GROWTH_LEGACY is undef.
336      - fix bug: areaNm1 & hEffNm1 are needed in seaice_growth (SEAICE_GROWTH_LEGACY)
337        but were not filled when resp. SEAICEadvArea=F & SEAICEadvHeff=F and
338        not multi-dim advection;
339      - fix seaice_growth.F to compile with both SEAICE_GROWTH_LEGACY and
340        SHORTWAVE_HEATING #undef.
341    o optim: make Makefile more robust (?)
342    o pkg/obcs:
343      * fix treatment of obcs_read_pickup for TAF
344    o pkg/shelfice:
345      * add missing initialisation of num_shifwflx
346      * new adjoint verification exp. for isomip
347      * change Prandtl and Schmidt numbers from generic formulations
348        (in terms of model diffus. and visc.) to separate runtime
349        parameters, with Holland and Jenkins (1999) default values.
350    o pkg/exf (interpolation):
351      - extended input field (2 rows) near the N & S poles:
352        * fill in with the symetric value (when even Nb of data in longitude)
353        * add average value at the poles only for scalar quantities ; for vector
354          component interpolation, skip the averaging and keep duplicated values,
355          unless the 2 components have same location (uvInterp=T) in which case
356          interpolate the 2 components together using S/R EXF_INTERP_UV.
357      - new S/R EXF_INTERP_UV to interpolate the 2 components of a vector field
358        together: this allows to account properly for local orientation when
359        averaging at N & S pole.
360      - add CPP option EXF_USE_OLD_INTERP_POLE to recover old results regarding
361        exf-interpolation near N & S poles. Undef by default.
362      - add debug check/print on 1rst iter if debugLevel >=2.
363    o pkg/exf:
364      - change masking flags definition (no longer "parameter"), put them in
365        common block and set them in S/R EXF_INIT_FIXED.
366      - change recognized masking flag from s,u,v to c,w,s since the mask
367        to use (maskC,W,S) depends on position on model grid and has little to
368        do with scalar/vector difference; fix masking if using P-coordinates.
369      - fix masking of wind-stress (was wrong if interpolated or read on A-grid)
370        and update results of exp. global_with_exf (x2).
371      - fix setting of zenith-angle table when SHORTWAVE_HEATING is undef.
372    o pkg/obcs
373      - S/R obcs_calc_stevens: fix a small bug (gammat -> gammas where appropriate)
374    o pkg/exf (interpolation):
375      - assume periodicity in X only if input field cover full longitude range.
376      - improve search for lat. index (supposed to be faster, in ~log2(ny) steps,
377        and should vectorise).
378      - fix input lat of the 2 added row (in case we provide N.pole data).
379    
380    checkpoint63h (2011/12/30)
381    o pkg/seaice:
382      - change declaration of UVM from _RL to _RS in order to get B-grid
383        uIce,vIce monitor when _RS = real*4
384    o pkg/offline:
385      - new S/R OFFLINE_RESET_PARMS for resetting main-model params (switch off flags);
386      - compute vertical velocity if not read from file (switch on exactConserv
387        & staggerTimeStep);
388      - fix output of ptracer monitor iter & time for default PTRACERS_monitorFreq.
389    o verification:
390      - update grid-files (in tutorial_held_suarez_cs/input and fizhi-cs-32x32x40/input)
391        with grid-angle generated using "utils/matlab/cs_grid/cubeCalcAngle.m":
392        fix Pb in yG definition @ 2 missing corners (previously yG was averaged);
393      - update output of exp. global_ocean.cs32x15.viscA4 after changing
394        grid-file angles (used here for coriolis-3d);
395      - remove (or gzip) few files not needed to run fizhi-cs experiments.
396    o pkg/exf (vector interpolation):
397      - rotate vector component toward local grid-axis orientation using grid-angles
398        (stored in GRID.h) instead of locally computed rotation angle; keep old code
399        available with exf option EXF_USE_OLD_VEC_ROTATION (undef by default).
400    o pkg/seaice:
401      - allow to compile with exf options ALLOW_ATM_TEMP or ALLOW_DOWNWARD_RADIATION
402        undefined. Fix and remove the stop when ALLOW_RUNOFF is undefined.
403    o pkg/PKG_OPTIONS.h files:
404      - move #include "CPP_OPTIONS.h" just after #include "PACKAGES_CONFIG.h",
405        outside of the #ifdef ALLOW_THISPKG / #endif block.
406      - update verification/*/code/PKG_OPTIONS.h files.
407    o add a verification experiment (offline_exf_seaice/input.seaice) that test
408      the B-grid LSOR solver
409    o pkg/seaice: sort out emissivity and long wave radiation step 2:
410      - add emissivity for snow and ice as new run-time parameters
411        (unfortunately) that default to the corresponding exf values; this
412        changes results in most verification experiments so that for backward
413        compatibility these parameter have to be set explicitly to inconsistent
414        values (ugly);
415      - the exf-flag EXF_LWDOWN_WITH_EMISSIVITY then gets rid off the hard-wired
416        emissivities of 0.97 associated with lwdownloc in S/R seaice_solve4temp
417        until we agree how to handle this bug properly
418    o pkg/exf (interpolation):
419      - add a set of run-time param ({inputfield}_interpMethod), one for
420        each interpolated input field, to select the interpolation method
421        with a value of zero switching off the interpolation;
422      - print interpolation parameters to standard output;
423      - refine exf_check.F accordingly ; stop if USE_NO_INTERP_RUNOFF is defined
424        (to use instead runoff_interpMethod=0 in data.exf).
425      - simplify default setting of interpolation parameters (for all fields,
426        set position to match model grid cell-center position, leading to trivial
427        interpolation in case of regular Lat-Lon grid) and fix for the case of
428        non-uniform delY.
429    o pkg/exf/exf_radiation.F: add the factor ocean_emissivity to lwdown, for
430       within #ifdef EXF_LWDOWN_WITH_EMISSIVITY/#endif. Unless ocean_emissivity=1.
431       this factor is absolutely required, because the lw exitance (= out-going
432       long wave radiation) is emissivity*stefanBoltzmann*T^4 + rho*lwdown,
433       where the reflectivity rho = 1-emissivity for conservation reasons. Once
434       this is established, we can remove the CPP-Flag (if we want to).
435    o pkg/seaice:
436      - qualify a stop statement in S/R seaice_check: EXF_READ_EVAP and
437        ALLOW_BULKFORMULAE are only required if SEAICE_EXTERNAL_FLUXES is defined
438      - sort out emissivity and long wave radiation, step 1: make SEAICE_emissivity
439        what the name implies (and not emissivity*BoltzmannConstant), this means
440        the old default value of 5.5e-8 now means
441        5.5e-8/5.670e-8 = 0.97001763668430343479 as ocean_emissivity in
442        S/R exf_readparms
443      - FV-discretization of the B-grid LSOR solver, turn on with
444        SEAICE_LSRBNEW. This new solver also involves a slight re-organization
445        of the calling routine dynsolver, so that B and C-grid code look a
446        little more alike.
447      - fix index bugs in ostres.F (B-grid code)
448    o pkg/seaice/seaice_ocean_budget.F: change (unused) code to make it look better
449    o pkg/seaice/seaice_readparms.F: make ocean_emissivity*stefanBoltzmann the
450      default for SEAICE_emissivity, if useEXF; requires setting a wrong
451      parameter value in global_ocean.cs32x15/input.seaice/data.seaice for
452      backward compatiblity
453    o model/src: use sigmaR in calc_ivdc
454    
455    checkpoint63g (2011/12/16)
456    o pkg/seaice/seaice_growth.F:
457      fix heat conservation of the coupled ocean-seaice system.
458      when SEAICE_HEAT_CONSERV_FIX is defined, the mismatch of
459      solid vs liquid water treatment is resolved via QNET.
460    o pkg/seaice/seaice_growth.F:
461      add missing term for sublimation in saltFlux, which was breaking conservation.
462    o pkg/seaice/seaice_model.F:
463      Remove this patholigical case treatment in evolution branch,
464      where it is un-necessary and breaks conservation.
465      Update global_ocean.cs32x15/results accordingly for
466      output.seaice.txt output_adm.seaice.txt and output_adm.seaice_dynmix.txt
467    o model/src:
468      useRealFreshWaterFlux: remove masking of EmPmP (using maskInC) in
469      external_forcing_surf.F and apply mask directly in S/R SOLVE_FOR_PRESSURE.
470    o pkg/obcs:
471      modify Stevens boundary conditions so that S/R obcs_calc_stevens computes
472      tendency for temperature and salinity that is then applied to update
473      theta and salt in S/R obcs_apply_ts; this requires proper masking of all
474      horizontal advection and diffusion contributions on the boundary (in
475      S/Rs gad_advection, gad_calc_rhs, gmredi_rtransport, gmredi_calc_diff), and
476      removing the mask in S/R timestep_tracer. The advantage of this approach is
477      that the updated tracer values include contributions from the surface
478      forcing and vertical diffusion.
479      This modification changes exp4.stevens because of vertical diffusion.
480    o model/src:
481      change non-curvilinear grid setting to also work with exch2 + blank tiles:
482      - move delX,delY to new header file (SET_GRID.h) and adjust length to 1rst
483        face dimensions.
484      - new S/R INI_LOCAL_GRID to define model tile-local grid (using same units
485        as delX,delY) and called from S/R INI_CARTESIAN_GRID, INI_CYLINDER_GRID
486        and INI_SPHERICAL_POLAR_GRID.
487      change test-experiment global_ocean.90x40x15:
488      - split the domain in many more tiles (9x4 tiles of 10x10 each);
489      - switch to exch2 and remove 1 blank-tile (but only for MPI test).
490      - update results of both test (std & dwnslp).
491    o pkg/diagnostics/diagstat_calc.F: fix problem with non-initialised halos in
492       tmp-fields for TARGET_NEC_SX at the cost of extra loops and less vectorisation
493    o model/src:
494      - take sigma-coords related code out of update_etah.F into new S/R UPDATE_ETAWS
495        and fix initialisation when using sigma-coords.
496    o model/src:
497     - improve Gael's changes from Jan 14, 2011 "addition of an 'update' of hfacc etc.
498       to their current value at the beginning of forward_step.F": add a new run-time
499       switch "doResetHFactors" (default=false) and use it to do (or not) the resetting.
500     - set doResetHFactors=T in the following test exp:
501        global_ocean.90x40x15/input (rStar) & input.dwnslp (linFS),
502        global_ocean.cs32x15/input.seaice (rStar), hs94.cs-32x32x5/input.impIGW (linFS)
503        and tutorial_global_oce_in_p (nonLinFS in p)
504    o pkg/ecco
505      - added IES cost term
506    o verification/advect_xz
507      - scale down the depth by 1/100 (from 200 km to just 2.km)
508      - add secondary test using divergent flow, r-star and implicit vertical advection.
509      - add note (check_conserve_TS.txt) and matlab script to check global
510        conservation of T & S with NonLin-FreeSurf and Adams-Bashforth.
511    o pkg/rbcs:
512      - add missing relaxUFile & relaxVFile in namelist (in rbcs_readparms.F).
513    o pkg/obcs (Stevens BCs):
514      - fix various problems in the phase speed computations of the Stevens
515        boundary conditions:
516        - sign error for western and southern boundaries,
517        - time tendencies were underestimated by factor of dTracerLev and some just
518          zero (for multidim advection schemes) -> now estimate time tendencies
519          from difference between previous (n) time level and the one before (n-1);
520          this requires storing a field per tracer per boundary, also in the pickup
521          files.
522        - replace deltaTmom in cflMer/Zon computation with dTracerLev
523        - set default phase velocity to cflMer/Zon
524      - update verification experiment exp4.stevens
525    o pkg/generic_advdiff (implicit_r):
526      - fix implicit vertical advection conservation with AB and/or NonLin-FreeSurf
527        (remove Tr*d/dz(w) in gad_implicit_r.F and add it in gad_calc_rhs.F);
528      - fix implicit vertical diffusion or advection with NonLin FreeSurf
529        (was using current recip_hFacC instead of future recip_hFacC): set future
530        recip_hFac in thermodynamics.F and pass & use it in all vertical implicit
531        solver S/R ;
532      - fill diagnostics of vertical advective fluxes (computed from tendency)
533        when using implicit vert. advection;
534      - update output of exp that uses NonLin-FreeSurf & implicit vertical diffusion:
535         global_ocean.90x40x15 (fwd+AD), global_ocean.cs32x15 (4 fwd +4 AD),
536         tutorial_global_oce_in_p (fwd), tutorial_tracer_adjsens (AD)
537         and cpl_aim+ocn (used in ocean); to be fixed: bottom_ctrl_5x5.
538    o pkg/diagnostics:
539      - add diags for T & S tendency which goes through Adams-Bashforth.
540    
541    checkpoint63f (2011/11/30)
542    o pkg/obcs/obcs_calc_stevens.F:
543      - join some loops to reduce number of if-statements
544      - fix a bug in code for northern and southern boundaries.
545    o pkg/seaice/seaice_init_varia.F
546      - undo resetting UVM=0 that has slipped in unnoticed in r1.49 and
547        caused zero ice-velocities for the B-grid code
548    o pkg/seaice/seaice_init_fixed.F
549      - fix a bug in the initialisation of the second metric terms
550        k2AtC and k2AtZ: k2AtC was set to the value of k2AtZ and k2AtZ was 0.
551      - this affects all seaice configurations with useCurviLinearGrid = .true.
552        and SEAICEuseDynamics = .true. (default) and SEAICEuseMetricTerms
553        = .true. (default)
554      - the only verification experiment affected is global_ocean.cs32x15:
555        icedyn, seaice, and seaice_dynmix (AD)
556    o pkg/thsice/thsice_diagnostics_state.F
557      - only for TARGET_NEC_SX: initialise all of tmpFld, so that overlap does
558        not contain garbage that can lead to surprises in diagstats_calc.F
559    o model/src:
560      - move bi,bj loops inside INTEGR_CONTINUITY ;
561      - call INTEGR_CONTINUITY directly from forward_step.F
562        (previously called from momentum_correction_step.F)
563      - call UPDATE_ETAH from integr_continuity.F and update initialise_varia.F,
564        forward_step.F and pkg/ecco/the_main_loop.F
565    o model/src/do_oceanic_phys.F:
566      - reset addMass to zero only if useICEFRONT ;
567      - separated k-loop for rhoInSitu calculation ;
568      - add 2 diagnostics for wVel*delta^k(Rho) at constant pressure (= WdRHO_P)
569        and at constant T,S (= WdRHOdP);
570      NOTE: change diagnostics WRHOMASS : this is now simply the Vertical transport
571        of In-Situ Density (Anomaly) (=wVel*rho^bar-k) (previously was Vertical
572        transport of locally-referenced potential density);
573        to recover old diag: (WRHOMASS)_old = (WRHOMASS)_new -1/2 * (WdRHOdP)
574    o gluemnc:
575      - replace ncrcat with ncks when adding variables to *.glob.nc
576      - change the way variables without record dimensions are handled so that
577        files that have variables with and without record variables can be glued:
578        add a record dimension with a new unique name to be able to differentiate
579        between variable with and without a-prior record dimensions. Remove
580        this record dimension before adding the variable to the *.glob.nc file.
581        This procedure automatically works also for grid.*.nc files that do not
582        have any record dimension.
583    o verification/cpl_aim+ocn:
584      - generate new reference output on baudelaire (gfortran, mpich2) (previously
585        from old aces-grid cluster, ao + ifort) and update 'run_cpl_test' script.
586    o pkg/obcs/obcs_calc_stevens.F:
587      - add code for northern and southern boundaries.
588      - reorder some loops to save some operations and so that drFBar can be scalar
589    o model/src:
590      - re-arrange extrapolation calculation in Adams-Bashforth S/R (affects machine
591        truncation) and add diagnostics for Adams-Bashforth tendency increment.
592      - update test-exp. AD output:
593        1D_ocean_ice_column, bottom_ctrl_5x5, lab_sea.noseaicedyn, obcs_ctrl;
594      and FWD output: exp4 (x3), fizhi-cs-32x32x40, fizhi-cs-aqualev20,
595        front_relax (x3), global_ocean.90x40x15 (x2), global_ocean.cs32x15 (x5),
596        global_ocean_ebm, ideal_2D_oce, internal_wave, isomip (x3), lab_sea (x4),
597        matrix_example, MLAdjust (x5), natl_box (x2), tutorial_advection_in_gyre,
598        tutorial_global_oce_in_p, tutorial_global_oce_latlon and
599        tutorial_plume_on_slope.
600    o pkg/diagnostics/diagstats_calc.F: add special code for TARGET_NEC_SX
601      that vectorises. This code uses 3 extra 2D fields, F90 array assignments
602      and F90 intrinsic routines SUM, MINVAL, MAXVAL, but since TARGET_NEC_SX
603      does not even come with an F77 compiler anymore, this should not be
604      a limitation
605    
606    checkpoint63e (2011/11/06)
607    o pkg/seaice adjoint of LSR:
608      - substantially rework STORE dirs.
609      - add new flag SEAICE_LSR_ADJOINT_ITER and parameter SOLV_MAX_FIXED
610        this flag will do SOLV_MAX_ITERS but only store SOLV_MAX_FIXED fields
611        and only perform SOLV_MAX_FIXED adjoint iters.
612        If flag SEAICE_LSR_ADJOINT_ITER is undef-ined, the store in the iteration
613        always goes to same record, meaning that the last forward field will be
614        the one used in the adjoint - an approximation.
615      - now produces non-zero LSR-related gradients, and acceptable gradients for
616        An's zonal (x-z) test case (to be checked in)
617      - lab_sea: produces acceptable gradients for lab_sea with forward/backward LSR
618        (but these are screwed up by the thermodynamics in the first place);
619        reduce from 4 to 3 timesteps to avoid t.d. issue as temporary solution;
620        output_adm.txt also reflects changes to seaice_lsr
621      - global_ocean.cs32x15:
622        * the "default" input_ad.seaice has been re-defined to always exclude dynamics
623          (output_adm.seaice.txt was updated)
624        * new input_ad.seaice_dynmix tests a forward LSR / backward free-drift
625          (output_adm.seaice_dynmix.txt)
626    o test-exp. exp4+stevens:
627      - switch off pTracers and nonHydrostatic (restart problems with NH); update output
628    o pkg/seaice (lsr solver):
629      - put coriolis term into FORCEX,Y (as in seaice_evp.F; previously in rhsU,V only);
630        update output (change truncation) of FWD test exp lab_sea & global_ocean.cs32x15
631      - fix SEAICEuseFREEDRIFT for new OBCS version (ndef OBCS_UVICE_OLD)
632      - new parameter "LSR_mixIniGuess" allows (if=2,4) to mix free-drift solution
633        into initial guess for linearised solver; use weight ~ (1/err)^2,4.
634      - compute (with new S/R) and print initial (+ free-driff sol. if available)
635        and final residual of linearised system.
636    o pkg/pp81: add diagnostics for vertical eddy viscosity and diffusivity
637      (requires new subroutines pp81_init_fixed.F/pp81_diagnostics_init.F)
638    o pkg/obcs: Stevens BCs (still only for east and west)
639      - fix Stevens BCs by using intermediate velocities of previous
640        time step as "baroclinic" contribution rather velocity of one grid cell
641        inside the boundaries; more consistent but makes the entire treatment
642        more complicated, requires new pickup files and two new S/Rs:
643        obcs_copy_uv_n and obcs_save_uv_n
644        keep old version with flag OBCS_STEVENS_USE_INTERIOR_VELOCITY
645        (undefined by default)
646      - silently move computation of some grid factors into separate loops to
647        save some recomputations
648      - add a hack for non-linear free surface
649      - add a verification experiment to exp4 that tests this code
650    o make gluemnc/xplodemnc work with (moron) non-GNU shell tools
651    
652    checkpoint63d (2011/10/25)
653    o pkg/obcs + seaice-dynamics:
654      - new implementation calls OBCS_APPLY_UVICE (in seaice_dynsolver.F) before
655        solving for uIce,vIce and prevent SEAICE_LSR or SEAICE_EVP to modify OB
656        values (consistent with an implicit method).
657      - add option OBCS_UVICE_OLD (in OBCS_OPTIONS.h, defined by default) to
658        return to older implementation (same results as before); note that none of
659        the "experimental" OBCS_SEAICE options are implemented in the new version.
660      - switch test exp. seaice_obcs to use new version (update output).
661    o pkg/seaice:
662      - add few stop (B-grid & CS-exch, B-grid & obcs, AUTODIFF & SEAICE_maskRHS)
663      - add parenthesis in Water-Ice drag calculations (evp & lsr);
664      - in seaice_lsr.F, simplify and fix AA3 setting in case sNx or sNy=1;
665        and fix case SEAICE_waterDrag=0 (but unstable if no or little seaice)
666      - update output of test exp lab_sea that uses evp or lsr (fwd+ad)
667        and global_ocean.cs32x15 (icedyn & seaice fwd+ad).
668    o pkg/layers:
669      - Include potential density as new coordinate (Thanks to David Munday)
670    o pkg/dic:
671      - Remove subroutine CALC_PCO2_APPROX_CO3 from carbon_chem.F and add
672        carbonate computation/output to CALC_PCO2_APPROX
673    o pkg/generic_advdiff
674      - make TAF generate code that vectorizes:
675        gad_dst3fl_adv_*.F, gad_u3c4_impl_r.F
676    o model/src:
677      - improve vectorization also for adjoint code of
678        solve_tridiagonal and solve_pentadiagonal. As this requires up to
679        5 new 3D-fields, this code is only turned on for the combination of
680        ALLOW_AUTODIFF_TAMC and TARGET_NEC_SX. Also remove error message
681        for singular matrix check (only for TARGET_NEC_SX).
682      - remove hard-wiring of CPP-flag ALLOW_SOLVERS_KLOOPINSIDE to
683        ALLOW_AUTODIFF. This flag now needs to be set outside of
684        solve_tri/pentadiagonal.F
685    o pkg/exf:
686      - fix previous modif in exf_readparms.F (revision 1.66: treatment of
687        optional namelist EXF_NML_OBCS).
688      - add many debug-print (to trace down where pkg/cal error msg comes from)
689    o pkg/mom_vecinv/mom_vi_hdissip.F
690      - rearrange loops so that vectorization is improved and in particular
691        the adjoint routine vectorizes. The code is a little longer now, but I
692        think easier to read.
693        Note: CPP-flag MOM_VI_ORIGINAL_VISCA4 is not tested.
694    o pkg/seaice:
695      - allow to specify initial seaice velocity from files (uIceFile,vIceFile)
696    o pkg/exch2:
697      - alternative code (without tile x tile matrix) for cumulated (global) sum;
698        used as default; keep using matrix version in adjustment.cs-32x32x1.
699    o tools/build_options:
700      - after merging some MPI and/or multi-threads specific optfiles so that
701        the modified default optfile support both built (using genmake2 -mpi
702        for the MPI built, using genmake2 -omp for OpenMP built),
703        move now obsolete optfiles to tools/build_options/unsupported/
704       (add copy of email sent to support list in doc/optfiles_changes.txt)
705    
706    checkpoint63c (2011/09/28)
707    o pkg/ebm:
708      - fix ebm_zonalmean.F for several procs in Ydir (nPy > 1); update output of
709        test exp. global_ocean_ebm (affects machine truncation, 12 digits for cg2d)
710    o pkg/seaice (SItracer pickup)
711    * Simple code for pickup of SItracer fields (#define ALLOW_SITRACER)
712      To be done:
713      - thorough testing of missing fields in S/R seaice_read_pickup
714      - thorough matching between generic tracers and specific fields used
715        (e.g. volume-weighted age, area-weighted age, salinity, ...)
716    o pkg/grdchk:
717      - all procs calculate and print finite-difference gradient (for testreport)
718      - change description output used by testreport;
719      - AD testing: also compare and report Finite-difference gradient;
720        => update all output_adm*.txt
721    o test exp. global_ocean_ebm:
722      - switch back useRealFreshWaterFlux (no problem anymore with run-off);
723        and turn on exactConserve; update (fwd) output.
724    o pkg/seaice (LSR):
725      - print to STDOUT number of solver iterations at SEAICE_monFreq interval.
726      - modify solver to deal cleanly with u/v switch at face edges (CS-grid):
727        * identical results with non-CS topology (but save up to half of EXCH calls)
728        * no much changes in cs-32 verification tests since no ice at face edges
729         (differences due to convergence criteria, since nb of iterations changed)
730        * expect some differences on lat-lon-cap grid.
731        update FWD results of global_ocean.cs32x15 test exp. (icedyn & seaice)
732    o pkg/exch2:
733      - add new CPP option to disable Cumul-Sum matrix (to save storage when using
734        many tiles); until alternative coding is added, just add a stop.
735    o pkg/kpp:
736      - move ptracer/salt correction to KPP diffusivity from calc_3d_diffusivity.F
737        to S/R KPP_CALC_DIFF_PTR (+ add tracer-index to argument list).
738    o optfiles:
739      - merged few MPI specific (*+mpi*) and multi-threads specific (*+mth) optfiles
740        into corresponding standard one, which now support different build:
741        (when using "genmake2 -mpi" for MPI built, "genmake2 -omp" for OpenMP built)
742      - add "darwin_amd64_gfortran" optfile (initially from Constantinos, tested by Gael)
743    o pkg/obcs (seaice):
744      - add missing EXCH for uIce,vIce after applying OBCS;
745      - remove S/R EXF_SWAPFFIELDS_X/Y , disable S/R EXF_SET_OBCS_X/Y by adding
746        argument = number of levels to S/R EXF_SWAPFFIELDS_XZ/YZ and S/R
747        EXF_SET_OBCS_XZ/YZ ; update obcs_exf_load.F;
748      - fix EXF_SET_OBCS_XZ/YZ for multi-threaded (assuming loaded arrays are shared)
749      - verification exp. seaice_obcs: split domain in 2 tiles ; add SIZE.h_mpi
750        and eedata.mth for MPI and mutlti-threaded testing.
751    o pkg/flt:
752      - make FLT EXCH working with multi-threads (and MPI + multi-threads);
753      - use buffer for floats IO (trajectories & profiles); size set in FLT_SIZE.h;
754      - fix pickup and trajectories + profiles output with multi-threads;
755      - add parameter to select group of fields to write along trajectory and
756        profile (default unchanged);
757      - only call PORT_RAND* function when flt_noise <> 0;
758      - add multi-threaded test for verification exp. flt_example.
759    o eesupp/src:
760      - fix S/R ALL_PROC_DIE for MPI+multi-threads.
761      - USE_OMP_THREADING: check that number of threads (from eedata) matches
762        actual number (from env.var. setting).
763    o pkg/ebm:
764      - fix multi-threading in ebm_area_t.F ; clean-up EBM.h header file.
765      - add multi-threaded test for verification exp. global_ocean_ebm
766    
767    checkpoint63b (2011/08/29)
768    o pkg/ebm:
769      - fix sign of runoff;
770      - update directly forcing fields (Qnet,EmPmR) to use standard
771        external_forcing_surf.F (remove ebm_forcing_surf.F);
772      - avoid loading forcing fields a 2nd time (1rst time from ini_forcing.F);
773      - set either tauThetaClimRelax (in data) or tauThetaZonRelax (in data.ebm)
774        and apply relaxation towards corresponding SST field (2-D map or ZonAver).
775      - update global_ocean_ebm parameters file data and update output (fwd+ad).
776    o verification/matrix_example:
777      - split domain in 8 tiles (2x4); add SIZE.h_mpi and eedata.mth for
778        MPI and mutlti-threaded testing.
779    o pkg/matrix:
780      - change name of S/R MATRIX_INIT to S/R MATRIX_INIT_VARIA ;
781      - fix for multi-tiles (add bi,bj indices to exp/impMatrixCounter);
782      - fix for multi-threaded (remove DATA statement);
783      - use standard DIFFERENT_MULTIPLE function;
784      - add MATRIX_OPTIONS.h
785    o verification/matrix_example:
786       To allow to split the domain in several tiles, change the domain size
787        from 31x31 to 32x32 by adding 1 row (on Southern side) + 1 column (on
788        Western side) of land points.
789    o (*_)write_pickup:
790      - fix few bugs in mypackage_read/write_pickup.F
791      - in MDS_WR_METAFILES calls, replace "myTime" by a local copy into
792        array of length 1 (was caught by compiler syntax-check).
793    o pkg/diagnostics (velocity potential solver):
794      - fix initialisation of main diagonal matrix (for overlap values)
795    o tools/build_options:
796      - towards single optfile for MPI and non-MPI built: merge few +mpi optfile
797        into previously non MPI one (linux_am64 pgf77,open64,pathf90,ifort11)
798      - linux_amd64_gfortran: merge +mpi_generic version into standard optfile:
799        * move IEEE flags to DEVEL section; take IEEE flags from +mpi_generic ;
800        * FAST case: for now, keep -O3 with ini_masks_etc.F in NOOPTFILES list;
801        and use "-devel" testreport option for standard testing on baudelaire.
802    o pkg/grdchk:
803      - Assume that all gradient-check position are within the same tile
804        corresponding to global indices (iGloTile,jGloTile) and that
805        positions (i,j indices or nbeg) are local to this tile;
806      - set tile local-indices and proc. number according to tile global-indices;
807      - remove grdchkwhichproc from namelist (retired param);
808      - send adjoint gradient to all procs so that all procs print it to STDOUT;
809      - switch on MPI test for global_ocean.90x40x15 AD test experiment.
810    o adding package bbl (Bottom Boundary Layer)
811      description in MITgcm/pkg/bbl/bbl_description.tex
812      example/test experiment in MITgcm_contrib/bbl
813    o adjoint verifications
814      - changed 5 experiments to multi-tiles
815        * global_ocean.90x40x15
816        * obcs_ctrl
817        * offline_exf_seaice
818        * tutorial_dic_adjoffline
819        * tutorial_tracer_adjsens
820        changed reference output for those that crossed tile boundaries
821        (changed choices of gradient check positions)
822      - with same tiling, switch on MPI test for the last 4 (add SIZE.h_mpi)
823      - temporary bug fix in grdchk_loc.F for obcs
824    o genmake2 & testreport
825      - add target "obj" (just for OBJFILES files) to Makefile;
826      - add option to specify FEXTRAFLAGS on command line.
827    o pkg/mypackage:
828      - remove bi,bj arguments from argument list of S/R MYPACKAGE_CALC_RHS
829    
830    checkpoint63a (2011/08/02)
831    o pkg/diagnostics (velocity potential):
832      - fix velocity-potential calculation when using OBCS: balance net inflow
833        at each level (new S/R OBCS_DIAG_BALANCE).
834      - fix some of the problems with OBCS in stream-function calculation.
835    o pkg/exf/exf_readparms.F
836      - make treatment of optional namelists (EXF_NML_04, EXF_NML_SGRUNOFF,
837        EXF_NML_OBCS) more consistent, so that you need not have these lists
838        in data.exf when they are not used.
839    o optim/optim_readdata.F:
840      - add some output about obcs variables that might help debugging
841      - add a check about nvarlength
842    o pkg/ctrl: once again, fix computation of endrec in s/r ctrl_init_rec
843    o pkg/diagnostics (velocity potential):
844      - fix mask for OBCS (still problems in stream-function with OBCS);
845      - add specific parameter (default = main code CG2D params) for solver;
846      - in case of poor convergence, use solution corresponding to lowest residual.
847    o pkg/seaice/seaice_growth.F: small changes that permit vectorizable
848      adjoint code. In general statements like tmpscal=fld(i,j) are problematic
849      and should be avoided where possible.
850    o model/src (rStar):
851      - include r* effect on reference-state (PhiRef) in totPhiHyd
852        (so that it's really the potential anomaly at the cell center);
853        affect solution only if z* with full pressure in EOS.
854      - test-exp global_ocean.90x40x15: reduce viscA4 (was not stable) and
855        update output (because of z* in totPhiHyd and viscA4 changes);
856      - keep the previous diagnostics as "PHIHYDcR" (closer to potential anomaly
857        @ constant r) until interpolation at constant r is implemented.
858    o pkg/diagnostics
859      - fix RCENTER diagnostics in case cell center is not at interface middle
860    o add code for TEOS-10 (www.teos-10.org, McDougall et al. 2011). Use
861      this eos with eosType = 'TEOS10', in data (PARM01). This eos implies
862      that THETA and SALT are "conservative temperature" and "absolute
863      salinity"
864    o pkg/ctrl
865      - fix computation of endrec in s/r ctrl_init_rec
866      - ctrl_pack/unpack_*: remove unused variables and some obsolete code
867    o pkg/seaice/seaice_growth.F
868      - fix recomputation with FENTY_AREA_EXPANSION_CONTRACTION code,
869        remove then obsolete STORE directives
870      - fix STORE directives for tice and tices, so that only the
871        appropriate part of the fields are stored (and not the entire
872        field); update global_ocean.cs32x15.seaice AD output.
873      - cosmetic changes: adjust CPP flags and indentation for better
874        legibilty
875    o pkg/autodiff: add mnc-output of adBottomDragFld (code contributed by
876      Chris Wilson)
877    o pkg/gmredi:
878       Add Sub-Meso Eddies parameterisation from Baylor (for now, disabled with TAF),
879       and test it in verification exp. "front_relax.bvp" (update output.bvp.txt)
880    
881    checkpoint63  (2011/07/11)
882    o pkg/exch2:
883     - rename+move: nTiles in W2_EXCH2_PARAMS.h --> exch2_nTiles in W2_EXCH2_TOPOLOGY.h
884     - exch2 version of Cumul-Sum routine: S/R W2_SET_MAP_CUMSUM set up the
885       (2*nTiles)x(nTiles) Cumul-Sum matrix and Master Proc collects all tiles X,Y
886       increments, calculates Cumul-Sum @ tile origin and sends results to each tile.
887    o pkg/diagnostics:
888     - deal with pairs of post-processed diags which are computed together; in
889       particular, re-order list of diags within 1 file to save 2nd computation.
890     - add S/R to compute velocity stream-function (called after velocity-potential
891       calculation) from divergence free transport -> new diagnostics "PsiVEL".
892     - add parameter to select grid-point location where PsiVEL == 0.
893    o eesupp/src:
894       new S/R to calculate cumulated sum on tiled array, corner grid-cell location
895       (specific S/R needed with exch2 topology - for now, just print an error msg)
896    o pkg/shelfice
897     - Implement friction velocity-dependent transfer coefficients following
898       Holland and Jenkins, JPO, 1999
899       Original code by M. Losch with small modifs.
900       Enable with CPP option SHI_ALLOW_GAMMAFRICT
901       and runtime flag SHELFICEuseGammaFrict
902    o verification lab_sea & global_ocean.cs32x15:
903     - use tools/xmakedepend (instead of cyrus_makedepend, in genmake_local):
904       does not miss some dependencies (but is slower) and also works with many files
905       (default makedepend limitation for AD built).
906     - use cyrus_makedepend in adjustment.128x64x1 (so that it still tested).
907    o pkg/diagnostics:
908     - add run-time parameter "useMissingValue" (def=False) to fill land-point
909        (i.e., where mask=0) with MissingValue ; used only in MNC output file.
910       This replaces CPP-option DIAGNOSTICS_MISSING_VALUE.
911     - Extend the use of "missing_value" setting from data.diagnostics for the case
912       of counter-diagnostics (where fraction-weight is zero). This applies both to
913       MNC and MDS output files.
914    o pkg/seaice/seaice_growth.F:
915      - add 'a priori' cap of latent heat flux based on actual mass considerations
916        when SEAICE_ADD_SUBLIMATION_TO_FWBUDGET is used in conjunction with the
917        non-legacy seaice_solve4temp.
918      - add diagnostic of the residual sublimation freshwater flux (the freshwater
919        flux taken from the ocean if the total actual latent heat fluxes exceed
920        the maximum)
921      - remove the CPP switch around the *_FWbySublim unit change and move diagnostic
922       fill for SIatmQnt, SIfwSubl, SIatmFW to the end of seaice_growth.F.
923      - add diagnostic of the actual sublimation freshwater flux (that is 0. ifndef
924       SEAICE_ADD_SUBLIMATION_TO_FWBUDGET) and of the latent heat flux (evap+sublim).
925      - bug fix : frWtrAtm needs a_FWbySublim ifdef SEAICE_ADD_SUBLIMATION_TO_FWBUDGET.
926      - bug fix : missing part to Martin's r_FWbySublim pathological case fix.
927    o verification 1D_ocean_ice_column:
928       made model domain truly 1x1x23 instead of 5x5x23 with only center cell (3,3,:) wet
929       update results
930  o pkg/diagnostics:  o pkg/diagnostics:
931   - Implement setting of "Post-Processed" diagnostics (corresponding to gdiag(5)='P')   - Implement setting of "Post-Processed" diagnostics (corresponding to gdiag(5)='P')
932     which are not filled-up but computed from other diags ; In this case, the mate     which are not filled-up but computed from other diags ; In this case, the mate
933     diag points to the primary (filled-up) diag to used for post processing.     diag points to the primary (filled-up) diag to used for post processing.
934   - Update Velocity-potential computation using post-processed diag framework.   - Update Velocity-potential computation using post-processed diag framework.
935   Change the ordering of fields and time-periods in MDS output file   ==> Change the ordering of fields and time-periods in MDS output file
936     when using periodic averaging: now writes one time record with the full set     when using periodic averaging: now writes one time record with the full set
937     of fields for this time period, then the next time reccord (it used to be     of fields for this time period, then the next time reccord (it used to be
938     one field with the full set of time records then the next field).     one field with the full set of time records then the next field).
939     Note: this is now similar to NetCDF (MNC) output file.       Note: this is now similar to NetCDF (MNC) output file. <==
940    
941  checkpoint62z (2011/06/21)  checkpoint62z (2011/06/21)
942  o adjoint monitor:  o adjoint monitor:
Legend:
Removed from v.1.1462  
changed lines
  Added in v.1.1636
  ViewVC Help
Powered by ViewVC 1.1.22