/[MITgcm]/MITgcm/doc/tag-index
ViewVC logotype

Diff of /MITgcm/doc/tag-index

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph | View Patch Patch

revision 1.1445 by gforget, Fri May 27 23:28:39 2011 UTC revision 1.1474 by jmc, Thu Jul 14 17:06:12 2011 UTC
# Line 4  $Name$ Line 4  $Name$
4      Notes on tags used in MITgcmUV      Notes on tags used in MITgcmUV
5      ==============================      ==============================
6    
7    o pkg/gmredi:
8       Add Sub-Meso Eddies parameterisation from Baylor (for now, disabled with TAF),
9       and test it in verification exp. "front_relax.bvp" (update output.bvp.txt)
10    
11    checkpoint63 (2011/07/11)
12    o pkg/exch2:
13     - rename+move: nTiles in W2_EXCH2_PARAMS.h --> exch2_nTiles in W2_EXCH2_TOPOLOGY.h
14     - exch2 version of Cumul-Sum routine: S/R W2_SET_MAP_CUMSUM set up the
15       (2*nTiles)x(nTiles) Cumul-Sum matrix and Master Proc collects all tiles X,Y
16       increments, calculates Cumul-Sum @ tile origin and sends results to each tile.
17    o pkg/diagnostics:
18     - deal with pairs of post-processed diags which are computed together; in
19       particular, re-order list of diags within 1 file to save 2nd computation.
20     - add S/R to compute velocity stream-function (called after velocity-potential
21       calculation) from divergence free transport -> new diagnostics "PsiVEL".
22     - add parameter to select grid-point location where PsiVEL == 0.
23    o eesupp/src:
24       new S/R to calculate cumulated sum on tiled array, corner grid-cell location
25       (specific S/R needed with exch2 topology - for now, just print an error msg)
26    o pkg/shelfice
27     - Implement friction velocity-dependent transfer coefficients following
28       Holland and Jenkins, JPO, 1999
29       Original code by M. Losch with small modifs.
30       Enable with CPP option SHI_ALLOW_GAMMAFRICT
31       and runtime flag SHELFICEuseGammaFrict
32    o verification lab_sea & global_ocean.cs32x15:
33     - use tools/xmakedepend (instead of cyrus_makedepend, in genmake_local):
34       does not miss some dependencies (but is slower) and also works with many files
35       (default makedepend limitation for AD built).
36     - use cyrus_makedepend in adjustment.128x64x1 (so that it still tested).
37    o pkg/diagnostics:
38     - add run-time parameter "useMissingValue" (def=False) to fill land-point
39        (i.e., where mask=0) with MissingValue ; used only in MNC output file.
40       This replaces CPP-option DIAGNOSTICS_MISSING_VALUE.
41     - Extend the use of "missing_value" setting from data.diagnostics for the case
42       of counter-diagnostics (where fraction-weight is zero). This applies both to
43       MNC and MDS output files.
44    o pkg/seaice/seaice_growth.F:
45      - add 'a priori' cap of latent heat flux based on actual mass considerations
46        when SEAICE_ADD_SUBLIMATION_TO_FWBUDGET is used in conjunction with the
47        non-legacy seaice_solve4temp.
48      - add diagnostic of the residual sublimation freshwater flux (the freshwater
49        flux taken from the ocean if the total actual latent heat fluxes exceed
50        the maximum)
51      - remove the CPP switch around the *_FWbySublim unit change and move diagnostic
52       fill for SIatmQnt, SIfwSubl, SIatmFW to the end of seaice_growth.F.
53      - add diagnostic of the actual sublimation freshwater flux (that is 0. ifndef
54       SEAICE_ADD_SUBLIMATION_TO_FWBUDGET) and of the latent heat flux (evap+sublim).
55      - bug fix : frWtrAtm needs a_FWbySublim ifdef SEAICE_ADD_SUBLIMATION_TO_FWBUDGET.
56      - bug fix : missing part to Martin's r_FWbySublim pathological case fix.
57    o verification 1D_ocean_ice_column:
58       made model domain truly 1x1x23 instead of 5x5x23 with only center cell (3,3,:) wet
59       update results
60    o pkg/diagnostics:
61     - Implement setting of "Post-Processed" diagnostics (corresponding to gdiag(5)='P')
62       which are not filled-up but computed from other diags ; In this case, the mate
63       diag points to the primary (filled-up) diag to used for post processing.
64     - Update Velocity-potential computation using post-processed diag framework.
65     ==> Change the ordering of fields and time-periods in MDS output file
66       when using periodic averaging: now writes one time record with the full set
67       of fields for this time period, then the next time reccord (it used to be
68       one field with the full set of time records then the next field).
69         Note: this is now similar to NetCDF (MNC) output file. <==
70    
71    checkpoint62z (2011/06/21)
72    o adjoint monitor:
73     - Add adjoint monitor output for packages exf, seaice
74       and update relevant testreport output
75    o pkg/seaice:
76     - re-order diags inits so that they appear in order in available_diagnostics.log
77     - added diags: hsnow thermo. rates of change, area preceeding ridiging process,
78       area/heff/hsnow preceeding thermodynamic growth/melt.
79     - modified diag: SIdA; output actual effect, as the description states.
80     - modified description: SIqneti, SIqneto, SIuheff, SIvheff, SIdAb*, HSNOW.
81     - retired redundant diags: SIyneg, SIfice, SIsnwice, SIthdgrh.
82       (SIyneg->SIdHbOCN; SIfice->SIdHbATC; SIsnwice->SIdHbFLO;
83        and SIthdgrh->SIdHbOCN+SIdHbATC+SIdHbATO)
84     - modified diags (2) : switch all SIdA*, SIdH*, SIdS* from delta to rates.
85     - added diagnostics for seaice generic tracers (SItr*).
86     - added SItrUnit and SItrNameLong run time param (for SItr* diags).
87     - in diag names, replaced 'PrTh' abbrev. of 'preceeding thermo' with 'PT'.
88     I. Fenty: 18-Jun-2011:
89     Minor changes to seaice package:
90     1) Retired old variables (A22, SEAICE_lhsublim, areaMax, areaMin, hiceMin) and
91        added some new ones (SEAICE_area_reg, SEAICE_hice_reg, SEAICE_area_floor)
92       - Differentiated "regularization variables" from "floor variables"
93        * areaMin became SEAICE_area_reg (old A22) and SEAICE_area_floor
94        * hiceMin became SEAICE_hice_reg (old hiceMin)
95          (with _reg meaning regularization variable)
96       - SEAICE_lhSublim becomes lhSublim, the sum of SEAICE_lhEvap and SEAICE_lhFusion
97        so as to ensure energy conservation when going between phases
98      - A22 was not used anywhere
99     2) Changed regularization procedure for heffActual and hsnowActual to ensure
100        well-boundedness and smooth adjoint in seaice_growth.F
101     3) Fixed a bug where seaice_solve4temp would not recognize ice-free grid cells
102        because the old regularization always set heffActual >= 0.05 cm
103     4) Changed the model so that the default behavior is to put a small (10^-5) "floor"
104        on AREA when HEFF > 0.
105      - went from requiring ALLOW_PRECLUDE_INFINITESIMAL_AREA to be defined to
106        requiring that DISABLE_AREA_FLOOR *not* be defined
107     Affected verifications:
108      - 1D_ocean_ice_column (output.txt output_adm.txt)
109      - global_ocean.cs32x15 (output.seaice.txt output_adm.seaice.txt)
110    o pkg/diagnostics:
111      - move MNC code from diagnostics_out.F into new diagnostics_mnc_out.F (2 S/R).
112      - rename S/R GETDIAG to DIAGNOSTICS_GET_DIAG and change type of 1rst argument
113        (was _RL, now integer) with option = 0 to retrieve all levels.
114      - add pieces of code to compute velocity potential at each level (new diagnostics
115        PhiVEL, works only when UVELMASS & VVELMASS are also turned on);
116        for now, using same params as CG2D (target-resisual, max Nb of iter ...).
117      - fix few issues with counter diagnostics in diagnostics_setdiag.F &
118        diagstats_setdiag.F (if diagnostic counter is itself a counter diag)
119        and in diagnostics_fract_fill.F (do not need a valid pointer for the
120        diagnostics counter-mate); check that definition of counter-diagnostic
121        includes a valid counter-mate (in diagnostics_set_levels.F).
122    o model/src (rStar):
123      - add rStar scaling factor in diags_phi_hyd.F (similar to calc_grad_phi_hyd.F);
124        affect solution only if z* with full pressure in EOS;
125        update output of test-exp global_ocean.90x40x15.
126    o pkg/seaice:
127      - introduce siEps=1e-5 parameter
128      - use areaMax in AREA update (part 4), consistent with ridging step (part 2.5).
129      - re-organize SEAICE_ADD_SUBLIMATION_TO_FWBUDGET code.
130      - introduce ALLOW_SITRACER and seaice_tracer_phys.F to handle generic seaice tracer.
131        For now it covers, and was tested for, ice salinity and age (attached to HEFF),
132        as well as ice cover age and ridging index (attached to AREA).
133        For now the run time parameters (in data.seaice/SEAICE_PARM03) are
134        SItrName (e.g. 'age') and SItrMate ('HEFF', which is the default, or 'AREA').
135        Up to SItrMaxNum=3 tracers can be used simultaneously.
136    o pkg/salt_plume:
137      -introduce SPsalFRAC run time parameter that sets the fraction of the
138       salt by-product of ice growth (SPsalFRAC*(1-SIsalFRAC)*salt typically)
139       that gets vertically redistributed (fluxed down) by pkg/salt_plume.
140    o model debug options:
141      - Switch reading of debugMode from S/R INI_PARMS (parameter file "data", stored
142        in PARAMS.h) to S/R EESET_PARMS (parameter file "eedata", stored in EEPARAMS.h).
143      - Refine debug-msg printing selection (3 new levels):
144        debugMode  : controls printing of debug messages (sequence of S/R calls).
145        debugLevel : controls printing of algorithm-relevant auxiliary/debug messages
146         debLevZero =  0 ; /* level of disabled aux. msg printing */
147         debLevA =  1 ; /* level of minimum  aux. msg printing */
148         debLevB =  2 ; /* level of low aux. print (report read-file opening)*/
149         debLevC =  3 ; /* level of moderate debug prt (most pkgs debug msg) */
150         debLevD =  4 ; /* level of enhanced debug prt (add DEBUG_STATS prt) */
151         debLevE =  5 ; /* level of extensive debug printing */
152        New debugLevel default: with default debugMode value (=F),
153          = 2 (debLevB) or = 1 (debLevA) in case ALLOW_AUTODIFF is defined.;
154          and if debugMode=T, default debugLevel = 4 (debLevD).
155        Relation with previous settings:
156         debLevB (=2) corresponds to former debLevA (=1)
157         debLevD (=4) corresponds to former debLevB (=2)
158        Note:
159         a) if debugLevel=0, skip WRITE_GRID call when nIter0 > 0 (same as before);
160         b) default debugLevel=1 is convenient in AD runs (avoid many file opening msgs);
161            to recover previous default, set debugLevel=2 (e.g. AD-test hs94.1x64x5)
162      - Add new parameter (printResidualFreq, read from PARM02 namelist) to print
163        detailed CG solvers convergence; off (=0) by default, except if debugLevel=5.
164    o pkg/obcs:
165      - change OBCSfixTopo default from True to False (should not change the results);
166        keep OBCSfixTopo=T in verification-exp. seaice_obcs.
167    o pkg/thsice:
168      - fix bug in thsice_calc_thickn.F (was introduced in version 1.18) in
169        2nd layer seaice sublimation (unlikely to happen)
170      - use Interior mask for OBCS in thsice_advection.F (similar to what is
171        done in gad_advection & seaice_advection).
172    o adjoint:
173      bug fix spotted by Gael Forget:
174      seaice_advection and thsice_advection still had
175      legacy CPP options to avoid CS corner updates for adjoint
176    o pkg/seaice:
177      => Change some of the defaults (2011/05/29):
178         - change SEAICEuseFluxForm default (from False to True)
179         - change DIFF1 default (from 0.004 m/s to 0. m/s)
180         And print warnings if DIFF1 is not set in data.seaice and centered
181          avection scheme is used without any diffusion.
182      also:
183      - fix seaice_diffusion calls in default AdvScheme part of seaice_advdiff.F;
184      - set SEAICEdiffKh[] default in the same way as SEAICEadvSch[]
185      - stop if DIFF1<>0 with SEAICEadvScheme <> 2, if DIFF1<>0 with any
186        other non-zero SEAICEdiffKh[] diffusivity, if SEAICEadvSalt=T with
187        #undef SEAICE_VARIABLE_SALINITY, if SEAICEadvAge=T with #undef SEAICE_AGE.
188      update results of test exp.:
189         lab_sea: output.fd (switch to AdvScheme=33 with diffKh=20)
190             output.hb87, output_adm.evp (SEAICEuseFluxForm=T and diffKh=200)
191             output_adm.noseaicedyn (SEAICEuseFluxForm=T)
192         offline_exf_seaice: output.seaicetd, output_adm (SEAICEuseFluxForm=T)
193         seaice_obcs: output (SEAICEuseFluxForm=T)
194      and prescribe old default for SEAICEuseFluxForm (=F) and DIFF1 (=0.004)
195          for standard fwd & AD lab_sea tests (to keep the same output).
196  o pkg/seaice/seaice_growth.F:  o pkg/seaice/seaice_growth.F:
197    - use Ian Fenty's capping formulas for actual ice    - use Ian Fenty's capping formulas for actual ice
198    thickness thoughout EVOLUTION branch.    thickness thoughout EVOLUTION branch.
199    - put treatment pathological case #2) in CPP brackets    - put treatment pathological case #2) in CPP brackets
200    (ALLOW_AVOID_INFINITESIMAL_AREA, undef by default).    (ALLOW_AVOID_INFINITESIMAL_AREA, undef by default).
201    - update global_ocean.cs32x15 and 1D_ocean_ice_colum results accordingly.      - update global_ocean.cs32x15 and 1D_ocean_ice_colum results accordingly.
202  o pkg/seaice:  o pkg/seaice:
203    - seaice_diffusion.F : remove the min(DX,DY) factor permanently;    - seaice_diffusion.F : remove the min(DX,DY) factor permanently;
204    pass the Laplacian diffusivity (in m/s2) diffKh as a parameter;    pass the Laplacian diffusivity (in m^2/s) diffKh as a parameter;
205    also pass fac as a param, which can be 1. (to update the tendency    also pass fac as a param, which can be 1. (to update the tendency
206    field) or the time step (to update the field itself).    field) or the time step (to update the field itself).
207    - seaice_advdiff.F: for multidim, call seaice_diffusion with    - seaice_advdiff.F: for multidim, call seaice_diffusion with
208    e.g. SEAICEdiffKhHeff and with fac=1; for single-dim, call    e.g. SEAICEdiffKhHeff and with fac=1; for single-dim, call
209    seaice_diffusion with e.g. SEAICEdiffKhHeff and with fac=time step.    seaice_diffusion with e.g. SEAICEdiffKhHeff and with fac=time step.
210    - SEAICE_PARAMS.h, seaice_readparms.F, seaice_check.F :    - SEAICE_PARAMS.h, seaice_readparms.F, seaice_check.F :
211    hooks to handle SEAICEdiffKhHeff, SEAICEdiffKhArea, etc.    hooks to handle SEAICEdiffKhHeff, SEAICEdiffKhArea, etc.
   - note: if any of SEAICEdiffKhHeff, SEAICEdiffKhArea, etc.  
   is specified to be >0, then DIFF1 is set to 0.  
212  o pkg/seaice:  o pkg/seaice:
213    diffusion with centered advection scheme (diffus.F & advect.F):    diffusion with centered advection scheme (diffus.F & advect.F):
214    - simplify S/R DIFFUS (put deltaT & DIFF1 factor outside, move EXCH outside)    - simplify S/R DIFFUS (put deltaT & DIFF1 factor outside, move EXCH outside)
Legend:
Removed from v.1.1445  
changed lines
  Added in v.1.1474
  ViewVC Help
Powered by ViewVC 1.1.22