--- MITgcm/doc/tag-index	2008/01/08 10:39:30	1.933
+++ MITgcm/doc/tag-index	2008/04/14 09:45:35	1.975
@@ -1,9 +1,143 @@
-$Header: /home/ubuntu/mnt/e9_copy/MITgcm/doc/tag-index,v 1.933 2008/01/08 10:39:30 dimitri Exp $
+$Header: /home/ubuntu/mnt/e9_copy/MITgcm/doc/tag-index,v 1.975 2008/04/14 09:45:35 mlosch Exp $
 $Name:  $
 
     Notes on tags used in MITgcmUV
     ==============================
 
+o pkg/my82: add netcdf-support and diagnostics 
+o thsice pkg:
+  - Now hsMax limits snow heitght by turning it into ice following
+    flooding scheme (and now conserving energy)
+  - Slight rewriting of the formula in thsice_calc_thick.F
+  - Parameter rhowi eliminated to be replaced by floodFac = (rhosw-rhoi)/rhos
+    --> changes results of global_ocean.cs32x15.icedyn and global_ocean.cs32x15.thsice 
+
+checkpoint59p
+o gchem / dic / cfc :
+  - add useDIC, useCFC , read from "data.gchem" (& hold in GCHEM.h);
+  - add new parameter files: "data.dic" & "data.cfc" ;
+  - various re-arrangement in initialisation & header file ;
+  - fix tutorial_global_oce_biogeo for multi-threaded test.
+o pkg/dic: test for "pickup_dic" file when restarting ;
+  if no pickup-file, can restart with a re-initialised pH (same as it did
+  before) providing pickupStrictlyMatch is set to False.
+o change argument list of S/R PTRACERS_WRITE_PICKUP & MYPACKAGE_WRITE_PICKUP
+  + fix call to S/R GGL90_WRITE_PICKUP & DIC_WRITE_PICKUP
+o add a "warning" (to Error msg file) when an Active Tracer is not using AB-2
+  and staggerTimeStep is off (needed for stability of Internal-wave dynamics).
+o move out of PARAMS.h & data the last pieces of old-ptracer code: tauTr1ClimRelax,
+ & lambdaTr1ClimRelax ; put those 2 params in PTRACERS_PARAMS.h & data.ptracers
+   (note: not clear to me what lambdaTr1ClimRelax is still used for ...)
+o pkg/mom_vecinv: - new parameter "selectVortScheme" to select which
+   scheme to use for vorticty-term ;
+ - compute upwindVorticity=T case within mom_vi_u/v_coriolis_c4.F 
+   (with default selectVortScheme, return to original discretisation)
+ - remove weird combination (e.g.: upwindVorticity & highOrderVorticity)
+o pkg/seaice: add a line to the summary to indicate grid type (B/C)
+o in mom_calc_visc, fix average value of viscAh_W & viscA4_W next to the
+  bottom ; only used with variable horizontal viscosity and non-hydrostatic.
+  also fix diagnostics VISCAHW & VISCA4W.
+
+checkpoint59o
+o dome/code/obcs_calc.F: avoid division by zero (detected using gfortran).
+o change the loop ordering in most gad_*_adv_x.F to improve vectorization:
+  move a few statemens out the main loop into separate loops
+o pkg/shelfice: 
+  - sort out freshwater flux; convert freshwater fluxes to mass fluxes 
+    (kg/m^2/s), does not break tests, because in verification/isomip,
+    rhoConstFresh=rhoConst (by accident)
+  - rearrange computation of tLoc, sLoc, pLoc to make code more efficient
+  - move S/R find_rho_scalar, pkg/ecco/sw_ptmp.F, pkg/ecco/sw_adtg.F into
+    new file model/src/seawater.F, so that they are available for all pkgs.
+  - convert potential temperature into in-situ temperature. This changes the
+    isomip tests => update tests
+o add a flag writePickupAtEnd (default=true) to be able to suppress 
+  writing a pickup at the last timestep
+o tools/mpack-1.6 : 
+  - disable automake (not working) and autoconf (not needed).
+  - update to version 1.6.4 which fix MD5 code on some 64 bits platforms
+    also cleaner with much less compilation warnings.
+o pkg/profiles: 
+  rename profiles_interp_mean_genericgrid as profiles_interp_mean_gg
+  (for "less than 32 characters name" compiler requirement)
+o pkg/obcs and pkg/exf: added capability to specify seaice open boundary
+  conditions that have a different sampling frequency than S/T/U/V obcs
+o pkg/diagnostics (stats-diags): 
+  - fix global Min/Max in case 1 processor get only empty tiles
+o genmake2: replace (4 times)
+     make genmake_tc_1.o >> genmake_warnings 2>&1
+  with
+     COMM="$CC $CFLAGS -c genmake_tc_1.c"
+     echo $COMM >> genmake_warnings
+     $COMM >> genmake_warnings 2>&1
+  to make genmake2 always see the value of CC as specified in the optfile.
+o generic_advdiff: - prather advection scheme (SOM) coded for CS-grid.
+  - add diagnostics for 1srt & 2nd Order moments and sub-grid variance.
+  - modify verification advect_cs test to test SOM-advection on CS-grid.
+o pkg/ctrl:
+  - Rewrite of ctrl_map_ini_ecco.F, 
+    introducing a generic routine (ctrl_map_ini_gen.F).
+  - Modification of ctrl_bound/adctrl_bound handling control vector bounds.
+
+checkpoint59n
+o pkg/diagnostics: for large number of diagnostics, store diagnostic mate 
+  number in dedicate array "hdiag":
+  - new version of S/R DIAGNOSTICS_ADD2LIST : DIAGNOSTICS_ADDTOLIST
+    with 1 more argument (mate number); modify old version DIAGNOSTICS_ADD2LIST.
+  - many small changes (integer format) for large number of diagnostics
+  - start to use DIAGNOSTICS_ADDTOLIST (necessary for diagnostics with
+    a counter mate) in pkg diagnostics, ptracers, thsice & aim_v23.
+o add parameter rotateGrid and Euler angles EulerPhi/Theta/Psi. For
+  usingSphericalGrid, this allows to define the rotated grid coordinates
+  via phiMin/thetaMin/dxSpacing/dySpacing, etc., but then re-compute the
+  geographical coordinates according to the inverse of the rotation defined
+  by the Euler angles, so that Coriolis parameter and online-interpolation by 
+  exf works with the geographical coordinates on XC/YC/XG/YG.
+  Naturally, this feature does not work with all packages, so some 
+  combinations are prohibited in config_summary (flt, flt_zonal, ecco, 
+  profiles), because there the coordinates are assumed to be regular 
+  spherical grid coordinates. 
+o pkg/gmredi,ctrl,ecco,autodiff,grdchk and model/src,inc:
+  - introduce isopycnal diffusion coefficient control.
+o tools/adjoint_options: 
+  - additional control vector components.
+o pkg/mnc: have mnc create marginally meaning full coordinate variables
+  (that is the grid indices) if usingCurvilinearGrid and NOT EXCH2 
+o pkg/mypackage: 
+  - add example of read/write pickup for state-var ; 
+  - add entry points to the main code for state-vars diags & write-pickup.
+o pkg/exf: rewrite of exf_getffieldrec.F to properly deal with year
+  transitions for useExfYearlyFields
+  - add new subroutine that determines the file to read from for 
+    use*YearlyFields = .TRUE. and .FALSE.
+  - add a verification experiment to global_with_exf that tests 
+    useExfYearlyFields with USE_EXF_INTERPOLATION defined
+o pkg/obcs/exf: add useOBCSYearlyFields (=.FALSE.) to obcs with exf in 
+  analogy to useExfYearlyFields; rearrange obcs_prescribe_read: two new 
+  subroutines (which could be generated from a template, because they are 
+  almost identical), for now they are included in obcs_prescribe_read.F for
+  simplicity
+o pkg/exf:
+  - add a little more diagnostic to exf_interp_read (in analogy to 
+    mds_read_field, can be turned off with debugLevel < debugLevA=1)
+  - improve vectorizability of exf_interp for TARGET_NEC_SX, makes code
+    ugly but fast by unrolling short inner loops, inserting a unroll=8 
+    directive in routine lagran, and splitting a loop and making do while the
+    outermost loop (the latter requires the intoduction of index arrays)
+o pkg/obcs: replace obcs_apply_area/heff/hsalt/hsnow with obcs_apply_seaice
+o pkg/seaice: moved DIFFERENT_MULTIPLE from seaice_model to seaice_dynsolver
+  http://forge.csail.mit.edu/pipermail/mitgcm-devel/2008-January/003173.html
+o verification/seaice_obcs: updated for restart test and latest options
+o pkg/seaice: add a new flag SEAICEuseTEM to use a slightly different
+  ice rheology (so-called truncated ellipse, that gets rid of tensile stress);
+  for now this is only available for the C-grid code and also within
+  #ifdef SEAICE_ALLOW_TEM, because this option may slow down the EVP code
+
+checkpoint59m
+o pkg/seaice: use different time constant for melting (SEAICE_gamma_t)
+  and freezing (SEAICE_gamma_t_frz) ice due to mixed layer temperature
+o gad_som : fix flux output (& diagnostics) to have same units as other   
+  advection scheme fluxes (was previously multiplied by deltaT).   
 o added verification/seaice_obcs both to test seaice open boundaries
   and to provide an example matlab scrpt for generating them
 o added verification/lab_sea/input.salt_plume for testing pkg/salt_plume