/[MITgcm]/MITgcm/doc/tag-index
ViewVC logotype

Diff of /MITgcm/doc/tag-index

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph | View Patch Patch

revision 1.1939 by jmc, Thu Nov 14 02:09:48 2013 UTC revision 1.2056 by jmc, Sat Aug 30 14:57:10 2014 UTC
# Line 4  $Name$ Line 4  $Name$
4      Notes on tags used in MITgcmUV      Notes on tags used in MITgcmUV
5      ==============================      ==============================
6    
7    checkpoint65c (2014/08/30)
8    o pkg/dic:
9      - take out of dic_atmos.F the initialisation part (corresponding to istate=0)
10        and move it to new S/R DIC_INI_ATMOS ; also simplify the dependencies for
11        AD compilers (but still a Pb with multi-threading and Ajoint dependencies).
12    o verification:
13      - new experiment testing OBCS and DIC pkgs, using params & output from
14        tutorial_global_oce_biogeo but limited to a sub-domain around Drake
15        passage: take OBCS from the last year of a 2 yrs simulation and initial
16        conditions from t=1.yr while keeping the same forcing.
17    o model/src:
18      - when allowFreezing=T, only reset below freezing initial Temp to Tfreezing
19        (at any k) if checkIniTemp is not set to FALSE (default checkIniTemp=T).
20    o pkg/diagnostics (Stats-Diags):
21      - re-write S/R DIAGSTATS_CALC (more similar to TARGET_NEC_SX part) to:
22        a) refine region where stats are computed, excluding where arrhFac=0 ;
23        b) fix missing interior mask (use with OBCS) in 3-D fields statistics;
24        c) extend regional stats over the region edges (for U or V pt location).
25    o pkg/gchem:
26      - add a (2nd) call to OBCS_APPLY_PTRACER in gchem_forcing_sep.F (needed since
27        pkg/dic is currently changing/updating ptracers values beyond the OB).
28    o verification (hs94):
29      - convert Held & Suarez external_forcing.F (from hs94.cs, with Sigma-coords
30        bits) to apply_forcing.F and undef USE_OLD_EXTERNAL_FORCING in experiments
31        hs94.cs-32x32x5 and tutorial_held_suarez_cs ; also use the same version of
32        apply_forcing.F in 2D hs94 (fwd, ad & oad) but keep LatLon hs94 unchanged.
33    o pkg/ptracers:
34      - implement Adams-Bashforth on pTracers (instead of on tracer tendency),
35        switched on by setting PTRACERS_doAB_onGpTr=F (default set to doAB_onGtGs)
36      - change exp4 secondary test (input.nlfs) to test AB on T & S & pTracer
37        with AB-2 code (so that it get tested).
38    o model/src:
39      - allow to apply Adams-Bashforth on Temp & Salt (instead of on gT,gS)
40        with AB-2 code (previously only available with AB-3 code).
41        Also move the code (call to ADAMS_BASHFORTH S/R) form thermodynamics.F
42        to temp/salt_integrate.F (since the 2nd part of gt/sNm1 update is done
43        there, by calling CYCLE_AB_TRACER).
44    o pkg/generic_advdiff:
45      - change Tracer argument (drop bi,bj indices) in S/R GAD_CALC_RHS,
46        GAD_C2_ADV_R, GAD_U3_ADV_R, GAD_C4_ADV_R, GAD_DIFF_R, GAD_BIHARM_R
47        + also in GMREDI_X/Y/RTRANSPORT ; and update corresponding calls in
48        S/R temp/salt/ptracers_integrate.F
49    o model/src & pkg/ptracers:
50      - remove common block variables gT,gS (in DYNVARS.h), except when
51         USE_OLD_EXTERNAL_FORCING is defined; update TAF storage accordingly.
52      - remove common block variable gPtr.
53    o model/src & pkgs:
54      - change gTracer (and/or tracer) argument (drop bi,bj indices) in S/R
55         ADAMS_BASHFORTH(2&3), CYCLE_(AB_)TRACER, FREESURF_RESCALE_G,
56         IMPLDIFF, SOLVE_TRIDIAGONAL & _PENTADIAGONAL, GAD_SOM_ADVECT,
57         GAD_ADVECTION, GAD_CALC_RHS, GAD_IMPLICIT_R, TIMEAVE_CUMUL_DIF_1T
58      + change accordingly all calling S/R.
59      - use local temperature/salinity/ptracer tendency array (without bi,bj)
60        in S/R temp/salt/ptracers_integrate.F
61    o pkg/seaice:
62      - move computation of stress contributions to rhsU/V in s/r seaice_lsr
63        to separate s/r seaice_lsr_rhsu/v in order to be able to re-use code
64      - make u/vIceC local variables if SEAICE_CGRID is defined only to be used
65        in seaice_lsr
66      - seaice_lsr.F: make local 4D arrays UXX, VYY, etc 2D
67        in s/r seaice_lsr_calc_coeffs
68    o pkg/mdsio:
69      - in MDS_READ/WRITE_FIELD, stop if file-name (+prefix) is too long
70        (e.g., > MAX_LEN_MBUF -90 ) or, in INI_MODEL_IO, if mdsioLocalDir is
71        too long (e.g., > MAX_LEN_FNAM/2 )
72    
73    checkpoint65b (2014/08/12)
74    o pkg/matrix:
75      - pass, as argument, updated tracer field to S/R MATRIX_STORE_TENDENCY_EXP
76    o model/src:
77      - fix initialisation of geothermalFile; compile geothermal-flux code in
78        natl_box verification experiment.
79    o model/src & pkg/down_slope:
80      - push the k loop inside S/R TIMESTEP_TRACER (now called outside the k loop).
81      - in dwnslp_apply.F, update tracer tendency instead of the future tracer
82        field and call S/R DWNSLP_APPLY before TIMESTEP_TRACER; this affects
83        results at machine truncation level: update output of experiments
84        global_ocean.90x40x15.dwnslp (FWD) and lab_sea.noseaicedyn (AD).
85    o pkg/diagnostics (Stats-Diags):
86      - do not cumulate the full volume when DIAGNOSTICS_FILL is
87        called with bibjFlg < 0 (no increment of the counter for 2D/3D diag);
88        This fix the mean statistics when DIAGNOSTICS_FILL is called multiple
89        times (but Min,Max and StD are still wrong).
90    o model/src:
91      - add geothermal flux forcing: read in ini_forcing.F as time-constant
92        field "geothermalFlux" applied in S/R APPLY_FORCING_T (apply_forcing.F)
93    o model/src:
94      - move CYCLE_TRACER calls from tracers_correction_step.F to temp/salt/ptracer
95        _integrate.F so that, when leaving S/R THERMODYANMICS, theta,salt and pTrac
96        arrays are already updated while adjustments (filters, conv.adjustment) are
97        still applied later, in S/R TRACERS_CORRECTION_STEP.
98    o model/src:
99      - store in common bloc array "rhoInSitu" the virtual potential temperature
100        anomaly that is used to compute geopotential: this make the atmos code
101        more similar to ocean code which already uses rhoInSitu in calc_phi_hyd.F
102    o pkg/seaice/seaice_lsr.F
103      - rename integer variable ilcall to ipass (that's what it is called
104        in the residual diagnostics
105      - change time stepping for NPSEUDOTIMESTEP > 2 (does not change the
106        default) for improved non-linear convergence of the first few steps
107      - adjust a few comments and add new ones to explain some of the store
108        directives
109    o pkg/generic_advdiff (& ptracers):
110      - re-work the code to check for valid advection scheme and for minimum
111        size of overlap (now stored in local common bloc in gad_advscheme.F)
112    o pkg/seaice: another attempt to make the adjoint work for sea ice dynamics
113      - re-initialize more variables in seaice_lsr: u/vIceC, u/vIceNm1
114      - add an auxilliary variable "bet" and fix store directives and keys in
115        seaice_lsr_tridiagu/v, this seems to do the trick (i.e. more or
116        less exact gradients in my tests); but there are still
117        recomputation warning (although gradients are sort of OK), when
118        SEAICE_LSR_VECTORIZE is not defined, so this flag and
119        SEAICE_LSR_VECTORIZE_ZEBRA are recommended for efficiency.
120      - update verification experiments lab_sea.
121      - change some comments in S/R seaice_calc_viscosities
122    o model/src:
123      - if staggerTimeStep=T, always apply exchange to velocity field in
124        do_stagger_fields_exchanges.F instead of in do_fields_blocking_exchanges.F
125        (independent of using multi-dim advection or not); no effect on FWD run
126        but affects AD results (at machine truncation level): update output of
127        experiment 1D_ocean_ice_column (ad: 12 digits), hs94.1x64x5 (ad,oad: 13.d)
128        and isomip (oad: 12.d).
129    o pkg/generic_advdiff:
130      - stop if doAB_onGtGs is set to FALSE but ignored
131      - refine warning related to stability of tracer time-stepping
132        regarding internal wave dynamics.
133      - setting of AdamsBashforth_T,S when doAB_onGtGs=F: remove condition
134        on staggerTimeStep & implicitIntGravWave (will now get a warning
135        if potentially unstable).
136    o pkg/kl10:
137      - add new pkg "kl10" for mixing due to internal wave breaking, from
138        http://www.sciencedirect.com/science/article/pii/S1463500310000144
139        (contribution from Jody Klymak), tested in verification experiment
140        verification/internal_wave/input.kl10/
141    o isomip experiment:
142      - test pkg/shelfice with Non-Lin Free-Surf in one of the FWD set-up
143        (input.htd) and update the output.
144    o cd_code experiments:
145      - use default cd_code options (#undef CD_CODE_NO_AB_MOMENTUM &
146        #undef CD_CODE_NO_AB_CORIOLIS) in experiments: cfc_example (fwd)
147        global_ocean.90x40x15 (ad & oad) and OpenAD (ad & oad) and
148        update the corresponding output.
149    o pkg/seaice:
150      - reduce the number of include files and store directives in
151        S/R seaice_lsr_tridiagu/v
152      - change the order of loops in one case in S/R seaice_lsr_tridiagv
153        (only for SEAICE_VECTORIZE_LSR_ZEBRA defined), which allows me to
154        get rid off one store directive (a TAF bug?)
155      - add one more instance of ifdef SEAICE_VECTORIZE_LSR_ZEBRA in
156        S/R seaice_lsr_tridiagv to change the loop range for consistency
157      - remove ilcall, m from parameter list of S/R seaice_lsr_tridiagu/v
158      - fix a bug that affects the JFNK solver: replace sNx/y by i/jMax in
159        S/R seaice_lsr_tridiagu/v (requires update of
160        offline_exf_seaice/input.dyn_jfnk)
161    
162    checkpoint65a (2014/07/27)
163    o model/src:
164      - Non-Lin Free-Surf in p/z coords: allows hFacW,S to be larger than
165        surrounding hFacC=1 @ edge of a step with different kSurfC on either side
166        (topo in p-coords, ice-shelf in z-coords); update output of experiments
167        tutorial_global_oce_in_p and isomip (both AD and OpenAD output).
168    o model/src:
169      - collect momentum forcing tendency into local 2-D array (passed as argument
170        to apply_forcing S/R); this simplifies mom. Forcing diagnostics and CD_CODE
171        parts in timestep.F (without CD_CODE_NO_AB_MOMENTUM defined = the default);
172        affects results at machine truncation level (e.g., if using OBCS_SPONGE).
173      - collect T & S forcing tendency into local 2-D array (passed as argument to
174        apply_forcing S/R); add 3-D diagnostics for temp & salt forcing tendency.
175        affects results at machine truncation level (e.g., ocean: if using
176        SHORTWAVE_HEATING ; atmos: if using FrictionHeating or (atm_Rq<>0) moist
177        correction due to vertical advection).
178      - update output of experiments: fizhi-cs-32x32x40 (13 digits),
179        global_ocean.cs32x15 (fwd: icedyn, seaice, thsice, all 3 @ 11d; adm & tml:
180        seaice_dynmix & thsice, fwd grd @ 3 & 8), hs94.1x64x5 (ad grd @ 13),
181        obcs_ctrl (ad & fwd grd @ 12 & 7).
182    o pkg/ptracers & diagnostics:
183      - use ptracers (short) name (instead of long one) to make ptracers diagnostics
184        title (to avoid some unexpected truncation); sort out ptracers diags units.
185      - collect ptracer forcing tendency into local 2-D array (passed as argument
186        to apply_forcing S/R); add 3-D diagnostics for ptracers forcing tendency.
187    
188    checkpoint65 (2014/07/18)
189    o pkg/fizhi:
190      - add parenthesis around fizhi tendencies in fizhi_tendency_apply.F: this
191        affects results at machine truncation level. Update output of experiments
192        fizhi-cs-32x32x40 (12 digits for cg2d) & fizhi-cs-aqualev20 (13 digits).
193    o pkg/seaice: more clean up
194      - rename TAF common block tapes to be more consistent and remove
195        unnecessary duplicates
196      - add store directives to remove more recomputations, but use smaller
197        tapes (and adjust keys) when SEAICE_LSR_ADJOINT_ITER is undefined.
198        The idea behind this flag is to reduce the memory footprint when the
199        adjoint of the LSR is not required. As of now, defining the flag
200        SEAICE_LSR_ADJOINT_ITER increases 4 common block tapes for 2D field by
201        a factor of SOLV_MAX_FIXED (=500 by default in SEAICE_SIZE.h).
202        For experiment offline_exf_seaice, this means on a linux box with gfortran
203        nearly a factor of 10 (but keep in mind there is mostly seaice code in
204        this experiment):
205        > size mitgcmuv_ad
206        text    data        bss     dec        hex  
207        5100659 1216  220458952  225560827  d71c8fb
208        5339425 1200 1868783272 1874123897 6fb4dc79 (SEAICE_LSR_ADJOINT_ITER)
209        but only a moderate increase of 36% for global_ocean.cs32x15:
210        text    data        bss     dec        hex
211        6695027 1648 1014578664 1021275339 3cdf6ccb
212        6695203 1648 1382505320 1389202171 52cd8afb (SEAICE_LSR_ADJOINT_ITER)
213      - note: there are still recomputations in global_ocean.cs32x15 and
214        offline_exf_seaice and the gradient agreement changes (gets a
215        little worse) for global_ocean.cs32x15 (-> update output_adm.seaice.txt)
216      - in general, the AD gradients still are wrong
217    o OpenAD
218      - clean up code_oad/ directories somewhat by moving files
219        dontCompile, dontTransform, keepOriginal to OAD_support/
220    o model/src:
221      - using MOM fluxform and Non-Lin Free-Surf with momDissip_In_AB=F
222        (not currently tested): add dissipation terms before NLFS rescaling of
223        tendencies (previously done after).
224    o pkg/diagnostics:
225      - write stats-diags in ascii file with more digits (same as in monitor).
226    o pkg/down_slope:
227      - drop the bi,bj dimension of argument recip_hFac in S/R DWNSLP_APPLY; with
228        NLFS (not tested), use new recip_hFac value in order to conserve tracer.
229    o model/src:
230      - new file "apply_forcing.F" containing all the code previously in
231        external_forcing.F, but with new argument list: pass, as new argument,
232        the current level tendency array to update (instead of a direct update
233        of the common bloc array). Change the corresponding calls.
234      - add CPP option USE_OLD_EXTERNAL_FORCING (default is undef) to use
235        EXTERNAL_FORCING_U,V,T,S subroutines (for backward compatibility).
236    o pkg/seaice/seaice_lsr, a little bit of clean up
237      - rearrange some code blocks, so that now all calculations for
238        setting up the right-hand-sides done within one single block
239        (I find that easier to read and understand)
240      - rearrange freedrift-code to reduce the number of ifdefs
241      - adjust some indentations and comments
242    
243    checkpoint64z (2014/07/10)
244    o model/src and several pkgs:
245      - change argument list of all S/R called from external_forcing.F and
246        called from ptracers_forcing.F (renamed to ptracers_apply_forcing.F)
247        to pass, as argument, the current level tendency array to update
248        (instead of a direct update of the common bloc array).
249      - change also (in the same way) argument list of PTRACERS_APPLY_FORCING;
250      - rename taueddy_external_forcing.f to taueddy_tendency_apply.F
251    o pkg/seaice/seaice_lsr.F
252      - always initialize local arrays in seaice_lsr_tridiagu/v
253      - add more local tapes to seaice_lsr_tridiagu/v
254      - move storing u/vice(:,:,bi,bj) out of seaice_lsr_tridiagu/v, but
255        keep it in bi/bj loop; this seems to be essential
256      - gradients are still wrong but only by 4-7 orders of magnitude
257        instead of 15 orders of magnitude, lab_sea improves a little
258    o pkg/seaice
259      - (pkg/autodiff) remove storing/restoring of seaiceMaskU/V that
260        generates unnecessary code in seaice_lsr_ad
261      - add more store directives in seaice_lsr to avoid unnecessary code
262        in seaice_lsr_ad
263      - exclude some residual computations in seaice_lsr when
264        ALLOW_AUTODIFF_TAMC is defined in order to avoid unnecessary code
265        in seaice_lsr_ad
266      - add more storing, a new tape (model/src/the_main_loop.F) and
267        another key for SEAICE_LSR_VECTORIZE_ZEBRA (the local keys ilockey
268        and klockey should be checked by a specialist)
269      - modify ( define SEAICE_VECTORIZE_LSR and SEAICE_LSR_ADJOINT_ITER )
270        and update lab_sea after previous changes in pkg/seaice below
271    o pkg/autodiff:
272      - introduce useSmoothCorrel2DinAdMode, SEAICEapproxLevInAd, and
273        viscFacInAd : run time parameters allowing for adjoint switches
274        note : logic for useSmoothCorrel2DinAdMode is in ctrl_readparms.F
275    o pkg/ecco:
276      - introduce cost_gencost_boxmean.F that computes a box mean
277        temperature (for use in adjoint sensitivity studies).
278    o model/src/set_defaults.F : initialize viscFacAdj to 1.
279    o pkg/mom_common/mom_calc_visc.F:
280      - ifdef ALLOW_AUTODIFF then include viscFacAdj factor.
281    o pkg/seaice/seaice_summary.F:
282      - statement for SEAICEadjMODE now in autodiff_readparms.F
283    o pkg/seaice:
284      - remove some store directives and add new ones in an effort to get
285        finally rid off the recomputation warnings. This is successful
286        when SEAICE_VECTORIZE_LSR ***and*** SEAICE_LSR_ADJOINT_ITER are
287        defined (i.e. no extensive recomputation warnings left), but there
288        are still too many recomputations on the solver iteration level
289      - define SEAICE_VECTORISZE_LSR in offline_exf_seaice/code_ad/SEAICE_OPTIONS.h
290      - move definition of MPSEUDOTIMESTEPS into TAMC-block in
291        SEAICE_SIZE.h
292      - add a store directive in S/R seaice_calc_viscosities
293    o pkg/seaice (ITD code):
294      - fix definition of Hlimit for multi-threaded case
295      - use double precision arithmetic to compute Hlimit: this affects results;
296        update output of experiment seaice_itd.
297    o replace content of verification/seaice_itd
298      - instead of a 1D column use the configuration of offline_exf_seaice
299        to test the ice thickness distribution code with ridging
300      - this is a first shot at this experiment
301      - change of some defaults of ridging parameters SEAICEhStar (from
302        100 to 25) and SEAICEmuRidging (from 5 to 3) in seaice_readparms.F
303        and lot of new comments.
304    
305    checkpoint64y (2014/06/20)
306    o pkg/seaice/seaice_reg_ridge.F:
307      - modify the regularization of very small volumes of ice; only check
308        total volume HEFF, and do not apply correction to individual ice
309        classes because that leads to funny patterns in the heat and fw-fluxes
310        into the ocean. Adjust seaice_itd/results/output.txt
311      - replace nITD by SEAICE_multDim in loop-ranges
312    o pkg/exf:
313      - add code to process the case field period = -12. with UV interpolation.
314      - move debug print (formerly active when exf_verbose=T) from EXF_getFFieldRec
315        into S/R that calls it (i.e., exf_set_gen.F, exf_set_uv.F & obcs_exf_load.F)
316    o verification/global_with_exf:
317      - switch all fields period to -12. (was previously untested) in input/data.exf
318        (but keep secondary test ".yearly" unchanged); update the reference output.
319    o pkg/cal:
320      - new calendar type "noLeapYear" for 365 days calendar without any leap year.
321    o pkg/exf:
322      - new integer parameter "exf_debugLev" (default set to main model debugLevel)
323        to replace logical switch "exf_verbose"
324      - report in STDOUT when loading a new record (if exf_debugLev >= 3)
325    o pkg/sbo:
326      - update from Katherine Quinn: evaluate mass directly from density and SSH
327        (budget using Finite Volume method) instead of from bottom pressure.
328      - allow testreport to collect few selected SBO output ; tested in exp.
329        global_ocean.90x40x15 (after updating the results, to include SBO output).
330      - fix some multi-threading issues (in output part).
331    o model/src & most packages:
332      - always call {PKG}_READPARMS even if corresponding use{PKG}=F;
333      - in {PKG}_READPARMS, in case use{PKG}=F: add a call to new S/R
334        PACKAGES_UNUSED_MSG to print a weak warning when parameter file
335        "data.{pkg}" exist ; and leave the S/R (return) just after.
336      - more standard LAND pkg interface (land_init_fixed.F, land_check.F).
337        + call LAND_READPARMS from packages_readparms.F
338    o pkg/seaice:
339      - remove code that resets useThSice in S/R seaice_readparms and
340        replace it by a warning in S/R seaice_check
341      - remove parameter MULTDIM, replace with nITD and runtime
342        parameter SEAICE_multDim (still hard-wired to nITD if
343        SEAICE_ITD is defined)
344    
345    checkpoint64x (2014/05/24)
346    o verification/lab_sea:
347      - update adjoint and TLM output following changes to pkg/salt_plume
348      - un-do the update after putting back local recip_Cp in few places.
349    o pkg/salt_plume: modifications by An Nguyen:
350      - add capability to do brine rejection (salt-plume) as function of
351        volume+tracers (instead of only salinity tracer).
352      - conserve volume by exchanging volume from each kLev to above to
353        accommodate in-coming brine volume
354      - store surface and klev exchanged fraction + volume in 4 new 3-d arrays
355      - switch KPP surf buoyancy due to brine forcing to 3-d
356        (3 more 3-d arrays, 2 for SPforcing[T,S], 1 for boplume)
357      - add salt_plume_volfrac, salt_plume_apply, salt_plume_tendency_apply_t
358      - unrelatedly, also add ad-hoc capability to vary salt_plume scheme
359        in East/West Arctic.
360    o pkg/sbo:
361      - incorporate modifications from Katherine Quinn to enable the use of sbo
362        pkg in ECCO-v4 set-up ; remove SBO-TimeAve output ; add monitor-like
363        output for future testreport verification (unfinished).
364    o pkg/atm_phys:
365      - change diagnostics (AtPh_Trf & AtPh_Qrf) of DARGAN_BETTSMILLER S/R:
366        skip the reseting of t_ref & q_ref to initial t & q ; this preserve the
367        output of S/R CAPECALCNEW (Parcel temp & q) for diagnostics.
368    o pkg/seaice
369      seaice_calc_ice_strength.F: modify expression to avoid divisions
370        (affects truncation)
371      seaice_do_ridging.F: clean up the insectarium
372      - fix a bug that was compensated by areaScaling (-> remove areaScaling code)
373      - added SEAICEsnowFracRidge to redistributed snow (2nd bug)
374      - set closing/openingRate to zero where no extra iteration is need (3rd bug)
375      - add some debugging information and error messages (warnings)
376    o model/src: modifications relatd to atmosphere p*:
377      - Switch to more accurate p* coordinate slope term (calc_grad_phi_hyd.F)
378      - With p* or Sigma-P, use constant reference Pot.Temp (thetaConst) instead
379        of vertical profile tRef in geopotential background and anomaly.
380      - Acount for true p* correction in theta <-> T conversion in pkg/aim_v23
381        and pkg/atm_phys.
382      - Update FWD output of experiments: aim.5l_cs (x2), fizhi-cs-32x32x40,
383        fizhi-cs-aqualev20, fizhi-gridalt-hs, tutorial_held_suarez_cs, cpl_aim+ocn.
384    o pkg/seaice: fix a bug in seaice_prepare_ridging.F, forgot a sqrt
385    o pkg/ptracers: compute ptracer source/sink due to linear free surface.
386        not used right now, but can be used in BGC packages to fix conservation.
387    o pkg/dic, pkg/gchem: move tracer_meanarea to gchem, so it can be used by
388        other packages too.
389    o pkg/seaice/seaice_calc_ice_strength.F: replace SEAICE_rhoSnow by
390        SEAICE_rhoIce in the Rothrock (1975)-type strength calculations (bug fix)
391    o model/src:
392      - since we have several heat capacity (even in model/src), define "recip_Cp"
393        as local variable (no longer in common block) to avoid any confusion.
394      - add thetaConst in PARAMS.h (to be used with pStar or sigma-P coords).
395    o pkg/exf:
396      - from Jeff Scott: add option (#define EXF_CALC_ATMRHO) to calculate local
397        air density as function of air Temp, Humidity and atm pressure.
398    
399    checkpoint64w (2014/05/02)
400    o verification:
401      - update output_adm.txt files for experiment global_ocean.cs32x15 (seaice &
402        seaice_dynmix) and lab_sea (primary test & noseaicedyn): moving/changing
403        code from seaice_growth.F & seaice_advdiff.F to new ridging routines
404        seaice_reg_ridge.F seaice_do_ridging.F affects AD gradient
405        (down to 8-7 matching digits for global_ocean and 5-6 for lab_sea).
406    o model/src: for atmosphere in p* coords:
407      - store factor rStarFacC**atm_kappa (= pStarFacK) in common block
408      - implement more accurate p* coordinate slope term (in calc_grad_phi_hyd.F),
409        but not yet activated.
410    o pkg/seaice: fix restart problem for ITD with new ice strength parameterisation:
411      - move computation of opnWtrFrac = 1-AREA to before computing ice strength
412      - this changes the results (but not for any verification experiment, because
413        none tests this), but avoids having an extra field in the restart files
414    o pkg/seaice: remove global variable TICE (not needed)
415      - replace by TICES or local variable where necessary (cost_seaice_test,
416        seaice_diagnostics_state)
417      - move copying TICE to TICES from seaice_check_pickup to seaice_read_pickup
418      - use specific read/write routines for reading and writing individual leves
419        of a multilevel field
420    o pkg/ctrl & model/inc:
421      - move additional anomaly fields of control vars (related to options:
422         ALLOW_KAPGM_CONTROL, ALLOW_KAPREDI_CONTROL and ALLOW_BOTTOMDRAG_CONTROL)
423        from DYNVARS.h into new header file: CTRL_FIELDS.h
424    o pkg/seaice: some small modifications to the ridging code
425      - make fw2ObyRidge a global variable and add the freshwater flux to
426        seaice_growth
427      - pass actual thickness from seaice_prepare_ridging, so that it is
428        computed only in one place and compute it in the same way as in
429        seaice_growth
430      - initialise more fields in seaice_do_ridging that where cause floating
431        point exceptions over land
432    o pkg/seaice: preparations for ridging code and first real ridging code
433      - move most of "PART 1" of S/R seaice_growth into a new and separate
434        S/R seaice_reg_ridge that will both regularize the state variable after
435        advection call the actual ridging routine;
436      - requires to make 5 fields global fields: d_HEFFbyNEG,d_HSNWbyNEG,
437        d_AREAbyRLX,d_HEFFbyRLX,saltFluxAdjust;
438      - remove ridging code from seaice_advdiff
439      - clean up remaining part 1 of seaice_growth in an attempt to make it
440        more readable (this is probably subjective)
441      - call seaice_itd_redist once in the initialisation phase to have the initial
442        conditions in the correct category
443      - finally: add new ridging routine for ITD code
444    
445    checkpoint64v (2014/04/11)
446    o pkg/ecco:
447      - add runtime parameters mdt[start,end]date[1,2]
448      - rename variable "tpmean" as "mdt" and "topexmeanfile" as "mdtdatfile"
449    o pkg/seaice:
450      - make deltaC a global variable, so that it can be used in ridging code
451      - first step towards ridging: introduce new routines that compute
452        ice strength based on ridging parameters
453      - add diagnostic for HSNOWITD
454      - add opnWtrFrac as a global variable (required for ridging scheme)
455    o pkg/salt_plume + pkg/seaice/seaice_growth.F
456      - add SALT_PLUME_IN_LEADS flag to activate pkg/salt_plume only when ice
457        AREA exceeds a threshold (code contributed by I.Fenty in 2011)
458    o verification/hs94.1x64x5:
459      - leave ALLOW_AUTODIFF_TAMC undefined in code_oad/AUTODIFF_OPTIONS.h
460      - do not use ECCO_CPPOPTIONS.h anymore for TAF & OpenAD Adjoint tests.
461    o autodiff:
462      - Start to include explicitly AUTODIFF_OPTIONS.h, COST_OPTIONS.h,
463        and CTRL_OPTIONS.h in src files (to enable to skip the ECCO_CPPOPTIONS.h)
464        For now, only in pkgs used in verification/hs94.1x64x5.
465      - Replace ALLOW_AUTODIFF_TAMC by ALLOW_AUTODIFF (except for tape/storage
466        which are specific to TAF/TAMC).
467      - Replace ALLOW_AUTODIFF_OPENAD by ALLOW_OPENAD:
468        since ALLOW_OPENAD is defined in PACKAGES_CONFIG.h (any time pkg/openad
469        is compiled), this simplifies/reduces which *_OPTIONS.h file to include.
470      - OpenAD: change Makefile to generate the appropriate AD_CONFIG.h when
471        building mitgcmuv_ad (make adAll).
472    o pkg/ecco:
473      - cost_gencost_seaicev4.F:
474         reformulate proxy cost as function of sst and local param SEAICE_freeze
475         change cost names from siv4-[sst,vol] to siv4-[deconc,exconc]
476      - add stop statement if old names siv4-[sst,vol] are used
477      - add snapshots + cost reports for atmospheric longwave
478      - remove factor 0.1 in front of wtau[u,v]
479      - replace never used flag ALLOW_TMI_COST_CONTRIBUTION with
480         ALLOW_TMI_SST_COST_CONTRIBUTION
481    o pkg/atm_phys:
482      - add some diagnostics for Short-wave and for convection S/R.
483    o pkg/seaice/seaice_growth:
484      - fix a bug in the lateral melt parameterization for SEAICE_ITD
485        in seaice_growth; tempFrz needs to be computed inside the i/j-loop
486      - rearrange loop order for better vector code in the same code block
487      - rewrite the floeDiameter formula to have fewer divisions
488      -  (miraculously) none of this changes the results of seaice_itd
489    o pkg/smooth:
490      - move param smooth2Ddiffnbt to pkg/ecco
491    o pkg/salt_plume:
492      - salt_plume_frac.F:
493         clean up local param names
494         reformulate (1-frac) to frac; original 1-frac was based on swfrac code
495    o pkg/rw:
496      - add RS version of S/R READ_MFLDS_LEV.
497    o pkg/streamice:
498      - fix the restart test by writing/reading pickup_streamice files.
499    o pkg/seaice:
500      - refine checks for jfnk-related parameters
501      - comment out if statement with SEAICEuseIMEX parameter as long as there
502        is no IMEX code to avoid confusion and surprises
503    
504    checkpoint64u (2014/03/07)
505    o verification/MLAdjust:
506      - rename secondary test suffix:
507         1.leith  -> A4FlxF  + switch to flux-form & add side-drag
508         0.leithD -> AhFlxF  + switch to flux-form
509         0.smag   -> AhVrDv  (use Vorticity-Div. visc form) + add side-drag
510         0.leith  -> AhStTn  (use Strain-Tension visc form) + add side-drag
511    o pkg/mom_vecinv:
512      - remove unused arguments from S/R MOM_VI_HDISSIP & MOM_HDISSIP (as it used
513        to be before mom_calc_visc.F)
514      - skip the call to MOM_CALC_TENSION & MOM_CALC_STRAIN if not needed.
515      - add 2nd copy of vort3 & strain that knows about lateral BC (free/no slip):
516        this is simpler for the adjoint and for diagnostics.
517    o model/src + pkg/momentum:
518      - add input files for  2-D additional Western and Southern cell-edge wall
519         (e.g., to add "thin-wall" where it is =1).
520      - fix sideDrag option for thin-walls with Non-Lin Free-Surf
521        using 2nd hFacZ that is computed from initial (fix domain) hFac
522      - known limitations of thin wall implementation: not yet coded for sigma
523        coords; not working with CD-scheme neither.
524    o pkg/seaice:
525      - rename recently introduced parameters from (wrong name) AB to
526        BDF (backward difference time discretisation)
527      - retire runtime parameters SEAICEuseAB2, SEAICE_abEps
528    o tools/adjoint_options:
529      - remove setting of "OPENAD=true" (now set by command line "genmake2 -oad")
530    
531    checkpoint64t (2014/02/01)
532    o pkg/ecco
533      - add compile flag ALLOW_GENCOST_TIMEVARY_WEIGHT in ECCO_OPTIONS.h and
534        runtime logical flag gencost_timevaryweight to read daily sea-ice sigma
535      - replace hard-coded record number and period which only work for monthly
536        with read-in runtime param that works for other periods (month,day,year)
537    o pkg/thsice
538      - corrected store directive fixes thsice adjoint gradient checks
539    o genmake2 & testreport:
540      - add genmake2 option "-oad" to generate a Makefile for OpenAD built and
541        in this case, use tools/adjoint_options/adjoint_oad as default AD optfile.
542        Update testreport accordingly. No need to set "export OPENAD=true"
543        in adjoint_options/adjoint_oad anymore (will be removed later).
544    o pkg/shelfice:
545      - put T & S shelfice forcing into model surfaceForcing_T,_S (for now,
546        only if SHELFICEboundaryLayer=F); Change model/src/external_forcing.F
547        so that surface forcing applies to k=kSurf if using pkg/shelfice.
548    o pkg/ctrl, pkg/grdchk, pkg/ecco:
549      - Changes to make GENARR more modular (i.e. invisible if not used)
550    o model/src/temp_integrate.F and salt_integrate.F
551      - re-include store directives that were removed on Dec 27th.
552    o model/src/external_forcing_surf.F
553      - add storage directives for EmPmR and PmEpR to avoid recomputation of
554        seaice_model in the adjoint that is problematic when seaice_model is
555        turned off in the adjoint. The resolved issue dated back to July when
556        EXTERNAL_FORCING_SURF call was moved.
557        Update global_ocean.cs32x15/*/output_adm.seaice_dynmix.txt accordingly.
558    o pkg/exf/exf_check.F
559      - fix a small bug again (originally found by Wentao Liu, now found again)
560      - streamline error output
561    o pkg/streamice and aim_v23:
562      - replace a few "_EXCH_XY_RL (" with "_EXCH_XY_RL(", so that
563        Apple's /usr/bin/cpp knows what to do:
564        Apple LLVM version 5.0 (clang-500.2.79) (based on LLVM 3.3svn)
565        Target: x86_64-apple-darwin13.0.0
566    
567    checkpoint64s (2014/01/05)
568    o tools/adjoint_options:
569      - switch to fastopt.net TAF server (instead of default fastopt.de) for
570        AD optfiles adjoint_diva & adjoint_f95 (similar to adjoint_default).
571    o model/src:
572      - remove some unnecessary TAF storage directives in forward_step.F and
573        in dynamics.F (note: not always removed by TAF, e.g., double storage
574        of kappaRU,kappaRV in former version of dynamics.F).
575    o model/src & pkg/ptracers:
576      - call directly GAD_IMPLICIT_R & IMPLDIFF + DWNSLP_APPLY from temp_integrate.F
577        salt_integrate.F and ptracers_integrate.F (instead of from thermodynamics.F)
578        and remove ptracers_dwnslp_apply.F & ptracers_implicit.F
579      - call MATRIX_STORE_TENDENCY_EXP for each tracer (in ptracers_integrate.F)
580      - add fZon & fMer as output argument of S/R GAD_CALC_RHS.
581      - update TAF AD-output of experiments global_ocean.90x40x15 (13 for AD-grad).
582    o useSingleCpuInput separates single-CPU input from single-CPU output;
583        for now only implemented for in exf_interp_read.F
584    o verification/advect_xy:
585      - fix missing EXCH call in local version of ini_salt.F and update output.
586    o momentum diagnostics:
587      - fix which deltaT is used in Total-Tendency diagnostics.
588      - fix typo in diagnostics for momentum tendency from AB.
589    o pkg/seaice/seaice_lsr.F: fix an initialisation bug for the
590        SEAICE_VECTORIZE_LSR_ZEBRA option that lead to NaNs on a NEC-SX8
591    
592    checkpoint64r (2013/12/08)
593    o verification/*/results:
594      - Update reference output of experiments that were passing with just 13 digits
595         (make it easier to detect future changes in results)
596    o model/src & pkg/ptracers:
597      - move calls to GAD_ADVECTION (Multi-Dim advection) from thermodynamics.F to
598        inside temp_integrate.F and salt_integrate.F and from ptracers_advection.F
599        to inside ptracers_integrate.F ; remove ptracers_advection.F
600    o coupling interface pkgs:
601        [atm_compon_interf, ocn_compon_interf & atm_ocn_coupler]
602      - change the config check to test the agreement of Ocean Depth
603        with ATM land/sea mask (instead of ATM orography);
604      - send to coupler the number of coupler time-steps to do for this run:
605        this allows to check for consistency and don't need anymore to be
606        specified in parameter file "data";
607      in coupler:
608      - check consistency of RunOff map versus Ocean Depth and ATM land/sea mask.
609      - improve report to log-file of config setting (pass log-file unit to few S/R)
610    o pkg/compon_communic:
611      - add coupling send/receive for non-tiled integer vector;
612      - add S/R to check and stop if any proc has an error (similar to
613        eesupp/src/stop_if_error.F but single thread and across Comm_World).
614    o pkg/exch2:
615      - in exch2*_get_rx[1,2]: use new list "W2_tileIndex" to replace search
616        through list of all tiles my proc owns.
617    o model/src:
618      - AUTODIFF only: in calc_adv_flow.F, recompute rTransKp (instead of copying
619        from rTrans) to simplify dependencies (no need to store rTrans anymore in
620        calling S/R); this affects AD results at machine truncation level:
621        update AD-output (TAF) of experiments: 1D_ocean_ice_column,
622        bottom_ctrl_5x5 & obcs_ctrl (12 digits for AD grad, same FWD grad).
623    o tools/build_options:
624      - simplify Warnings options (-ieee & -devel cases) in linux_amd64_gfortran
625    o coupling interface pkgs:
626        [compon_communic, atm_compon_interf & ocn_compon_interf]
627      - move declaration of local array "ibuf" out of header file "CPLR_SIG.h"
628        to each S/R that needs it; remove un-used variables.
629      - change component tile registration (cpl_register.F in both compon_interf
630        and mitcomponent_tile_register.F) to pass the full list of tiles
631        information (including bi,bj) in 1 vector (instead of in a bi,bj matrix).
632      - with pkg/exch2: adopt the same convention used for I/O to define mapping
633        towards coupler global array (unless W2_useE2ioLayOut=F):
634         a) can now use different tiling between atm & ocn comp.
635         b) no needs to modify the run-Off map when changing tiling (was needed
636            even if using the same tiling between atm & ocn).
637         c) will allow to run with blank-tiles in 1 component (e.g., for ocean
638            full land tiles); not yet tested.
639      - check for valid mapping from comp. tile to coupler global array
640      - improve report of tile registration results to log file.
641    o pkg/exch2:
642      - in eesupp/src/eeboot.F: move call to W2_EEBOOT before Coupler
643        tile-registration (CPL_REGISTER);
644      - activate (un-comment) definition and setting of "W2_tileIndex" list to
645        store the local bi,bj indices of each tile;
646      - also print bi,bj in local report to log file;
647      - fix pkg/debug/debug_cs_corner_uv.F for the case nSy > 1 (left from
648        Jun 2009 modif of pkg/exch2).
649    o testing on baudelaire:
650      - run 2 tests at a time: no significant slow down (since enough cpu) and
651        get the full set of test done earlier
652      - switch the ifort test to "-devel" ; run the OpenAD test everyday.
653    o model/src/thermodynamics.F and routines called from it:
654      - pkg/gmredi: gmredi_residual_flow.F (replacing gmredi_calc_uvflow.F &
655        gmredi_calc_wflow.F) to update eulerian velocity (input) into residual
656        velocity (outp) by adding bolus velocity.
657      - model/src: calc_adv_flow.F (replacing calc_common_factors.F) to compute
658        mass transport from velocity + lateral grid cell area
659      - rename calc_gt.F to temp_integrate.F (includes call to TIMESTEP_TRACER)
660      - rename calc_gs.F to salt_integrate.F (includes call to TIMESTEP_TRACER)
661     in thermodynamics.F
662      - remove k from thermodynamics.F and move it to temp_integrate.F
663        salt_integrate.F and ptracers_integrate.F (now done inside the tracer
664        loop).
665      - compute locally (in thermodynamics.F) 3-D velocity field that is used to
666        advect tracers; pass it as argument to GAD_ADVECTION, GAD_SOM_ADVECT,
667        PTRACERS_ADVECTION, TEMP_INTEGRATE, SALT_INTEGRATE, PTRACERS_INTEGRATE,
668        GAD_IMPLICIT_R and PTRACERS_IMPLICIT
669      - update AD-output (TAF & OAD) of experiments: 1D_ocean_ice_column,
670        global_ocean.90x40x15, tutorial_global_oce_biogeo and
671        tutorial_tracer_adjsens (+ TLM output).
672    o tools/OAD_support and (verification/*/) code_oad:
673      - OAD_support/cb2mGetModules.csh: add PACKAGES_CONFIG.h in header file to
674        module conversion ; remove unneeded CPP_EEOPTIONS.h.
675      - code_oad/CPP_OPTIONS.h: remove PACKAGES_CONFIG.h and use a more standard
676        version (closer to model/inc/CPP_OPTIONS.h).
677    o model/src:
678      - remove parameter "useOldFreezing" from PARAMS.h and push it to the
679        retired list of parameters (routine FREEZE has been replace by surface
680        freezing (10.yrs ago) and by pkg/frazil (interior freezing).
681    o pkg/gmredi:
682      - add option (GM_CALC_TRANSP_FROM_VEL) to compute transport directly from
683        velocity (same scheme but affects machine truncation) for GM_AdvForm.
684      - update output of FWD experiments: front_relax.bvp,
685        global_ocean.90x40x15.dwnslp, global_ocean.cs32x15 and ideal_2D_oce.
686    
687    checkpoint64q (2013/11/17)
688  o verification:  o verification:
689    - generate new output on baudelaire (gfortran, -ieee) for OpenAD experiments    - generate new output on baudelaire (gfortran, -ieee) for OpenAD experiments
690      tutorial_global_oce_biogeo and global_ocean.90x40x15.      tutorial_global_oce_biogeo and global_ocean.90x40x15.
# Line 12  o verification: Line 693  o verification:
693  o pkg/cost:  o pkg/cost:
694    - define a "final cost function" for each tile, and use GLOBAL_SUM_TILE_RL    - define a "final cost function" for each tile, and use GLOBAL_SUM_TILE_RL
695      (instead of _GLOBAL_SUM_RL) to get the final cost from all procs & threads:      (instead of _GLOBAL_SUM_RL) to get the final cost from all procs & threads:
696      o this fixes global-sum value if multi-threads (since GLOBAL_SUM_TILE_RL      o this fixes global-sum value if multi-threads (since GLOBAL_SUM_RL
697        cannot be applied to var in common block).        cannot be applied to var in common block).
698      o allows to get results independent of tile-per-proc setting (if using      o allows to get results independent of tile-per-proc setting (if using
699        slower GLOBAL_SUM_SEND_RECV option).        slower GLOBAL_SUM_SEND_RECV option).
Legend:
Removed from v.1.1939  
changed lines
  Added in v.1.2056
  ViewVC Help
Powered by ViewVC 1.1.22